BAPI for Equipment Tasklist

Hi,
Can any one help me with Equipment Tasklist BAPI??
Regards,
PMAddi

Hi,
There are no suitable BAPI's for creating PM/CS task lists.
(BAPI_ROUTING_CREATE is only suitable to create PP type routings).
-Paul

Similar Messages

  • How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA

    Hi ,
      How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
      May i know what are the input parameters & fields mandatory
      for each Table structures ct_data , ct_datax , it_descript , it_longtext.
      Can any one explain me Step by Step Process.
      B'cos i tried with below code. Equipment is not getting created.
      wa_itab-equipment_ext = '000000000100000001'.
      wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
      wa_itab-text_language = 'EN'.
      wa_itab-sdescript     = 'Short Description'.
      APPEND wa_itab TO it_itab.
      CLEAR  wa_itab.
      LOOP AT it_itab INTO wa_itab.
        ct_data-ta_guid       = '000000000000000001'.
        ct_data-equipment_ext = wa_itab-equipment_ext.
        ct_data-descript      = wa_itab-descript     .
        ct_data-valid_date    = sy-datum.
        ct_data-equicatgry    = 'M'.
        APPEND ct_data.
        CLEAR  ct_data.
        ct_datax-ta_guid       = '000000000000000001'.
        ct_datax-equipment_ext = 'X'.
        ct_datax-equipment     = 'X'.
        APPEND ct_datax.
        CLEAR  ct_datax.
        it_descript-ta_guid       = '000000000000000001'.
        it_descript-text_language = wa_itab-text_language.
        it_descript-descript      = wa_itab-sdescript    .
        APPEND it_descript.
        CLEAR  it_descript.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'LTXT'.
        it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'bbbbbbbbbbbb'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'cccccccccccccccc'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      call BAPI-function in this system
        CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
          TABLES
            ct_data     = ct_data
            ct_datax    = ct_datax
            it_descript = it_descript
            it_longtext = it_longtext
            return      = return
          EXCEPTIONS
            OTHERS      = 1.
        IF sy-subrc = 0.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          WRITE : 'Successful'.
        ENDIF.
        IF NOT return IS INITIAL.
          LOOP AT return.
            IF return-type = 'A' OR return-type = 'E'.
              WRITE : 'Error'.
            ENDIF.
          ENDLOOP.
        ENDIF.
        REFRESH  return.
      ENDLOOP.
    Regards
    SUrendar

    Hi ,
      How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
      May i know what are the input parameters & fields mandatory
      for each Table structures ct_data , ct_datax , it_descript , it_longtext.
      Can any one explain me Step by Step Process.
      B'cos i tried with below code. Equipment is not getting created.
      wa_itab-equipment_ext = '000000000100000001'.
      wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
      wa_itab-text_language = 'EN'.
      wa_itab-sdescript     = 'Short Description'.
      APPEND wa_itab TO it_itab.
      CLEAR  wa_itab.
      LOOP AT it_itab INTO wa_itab.
        ct_data-ta_guid       = '000000000000000001'.
        ct_data-equipment_ext = wa_itab-equipment_ext.
        ct_data-descript      = wa_itab-descript     .
        ct_data-valid_date    = sy-datum.
        ct_data-equicatgry    = 'M'.
        APPEND ct_data.
        CLEAR  ct_data.
        ct_datax-ta_guid       = '000000000000000001'.
        ct_datax-equipment_ext = 'X'.
        ct_datax-equipment     = 'X'.
        APPEND ct_datax.
        CLEAR  ct_datax.
        it_descript-ta_guid       = '000000000000000001'.
        it_descript-text_language = wa_itab-text_language.
        it_descript-descript      = wa_itab-sdescript    .
        APPEND it_descript.
        CLEAR  it_descript.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'LTXT'.
        it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'bbbbbbbbbbbb'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'cccccccccccccccc'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      call BAPI-function in this system
        CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
          TABLES
            ct_data     = ct_data
            ct_datax    = ct_datax
            it_descript = it_descript
            it_longtext = it_longtext
            return      = return
          EXCEPTIONS
            OTHERS      = 1.
        IF sy-subrc = 0.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          WRITE : 'Successful'.
        ENDIF.
        IF NOT return IS INITIAL.
          LOOP AT return.
            IF return-type = 'A' OR return-type = 'E'.
              WRITE : 'Error'.
            ENDIF.
          ENDLOOP.
        ENDIF.
        REFRESH  return.
      ENDLOOP.
    Regards
    SUrendar

  • Bapi for Equipment change

    HI
       I would like to know , is there  any  BAPI for Equipment change(T.code-IE02) to update all the feilds of equipment & automatically creates an asset number as normal tranaction code performes.
      As of now i am useing BAPI_EQUI_Change, please let me know any other than this BAPI
    Thanks&Regards
    lakshmi

    Hi,
       Check the FM <b>I_CHANGE_STATUS.</b>
    See the documentaion below
    FU I_CHANGE_STATUS
    Short Text
    Change a status for an object
    Description
    This function module is called to update the user status for a specified object (notification, notification task, order, or operation).
    Regards

  • Bapi for Equipment BOM

    Is there any standard BAPI to create Equipment BOM? Tcode - IB01

    Hello,
    I use that bapi for create BOM but not equipement BOM.
    I find on forum, response wiche can help you :
    Equipment BOM Upload BAPI
    RFC / BAPI for Equipment BOM - IB01
    http://wiki.sdn.sap.com/wiki/display/ABAP/ECCstandardBatchInputprograms
    Thierry

  • BAPI for equipment classification

    Hi,
      Does anybody know the BAPI for equipment classification and also the required fields of the BAPI.
    With Regards,
    Nelson

    Hi,
    Check this Bapi <b>BAPI_EQUIPMENT_SAVEREPLICA</b>, Sure it will help u...
    Regards,
    Sridhar

  • BAPIs for Equipment list, Equipment classification details

    Hi,
    Can somebody give me the details of BAPs for getting
    1.    Equipment list for a given function location.
    2.    Equipment classification details for the given equipment number.
    Thanks & Regards
    Lakshminarayanan J

    Hi,
    what do you mean with details? Do you need the fields? You can do a double click on the data type of the details filled for browsing deeper into the structure of the details. Or you can use TCODE SE11 and check the type in the data dictionary.
    Best Regards,
    Marcel

  • Table for equipment tasklist

    Hey gurus,
    Can u tell me the table where the data of equipment tasklist is stored? Actually i want to fetch the packages of a startegy which is assigned to the equipment via the equipment tasklist.
    Regards,
    Abhishek

    Hi Abhishek
    You will get this information in PLAS and EAPL table.
    Package detail will avaliable in  T351X
    Rahul.
    Edited by: Rahul Bande on May 30, 2009 7:27 PM
    Edited by: Rahul Bande on May 30, 2009 7:30 PM

  • BAPI for Equipment Stock Info Maintenance

    Hello,
    Transaction for maintenance of the Equipment master data (IE02) contains tab named "SerData" where it is possible to specify serial number and Stock information. I need to assign Sales Order No./ Position to the Equipment during it's creation. But the interface of the FM BAPI_EQUI_CREATE or BAPI_EQUI_CHANGE does not contain these parameters.
    Is there a way I can do this using BAPI?
    Points will be rewarded for help, of course.
    Thank you in advance
    Best regards,
    Maksim

    Santosh,
    We generate a large number of work orders using the OrderMaintain method of BAPI_ALM_ORDER_MAINTAIN.  We have exposed it to a .NET front end through a web service and this seems to work well for us.  As Pete said, your requirements are rather brief but if you look at this function module it might help you.
    Note: This and other related BAPIs were first available in 4.7 and I think are standard beyond that but can't say for sure.
    Bob Stanza

  • FM/BAPI for Equipment BOM

    Hi All,
    Please let me know if there is any BAPI/ FM available for creating Equipment BOM (IB01 trancastion).
    Thanks in advance
    regards,
    Booma

    Check sample code in:
    http://scn.sap.com/thread/562325
    Regards,
    Sergio.

  • Is there any BAPI  FOR TASKLIST CREATION OF ANY EQUIPMENT ?

    Dear Sir,
    Is there any BAPI  FOR TASKLIST CREATION OF ANY EQUIPMENT .
    Thanks.
    Regards,
    Pooja Joshi.

    Hello Pooja
    Perhaps the following link may be useful:
    <a href="http://www.sapfans.com/forums/viewtopic.php?p=906052">FAQ: Plant Maintenance and Customer Service BAPIs</a>
    Regards
      Uwe

  • BAPI for PR Creation  and Equipment master updation

    Hi Gurus ,
    Please provide me the function module (BAPI) for the following.
    1. Create Purchase Requisition
    2. Update/Change Equipment master(Iq02)
    Thanks
    Tausif

    Hi Tausifur,
    You can goto Tcode BAPI and find all the relevant BAPIs that you want. This will help you in the future.
    Cheers
    Keshav

  • BAPI for assign equipment to a class

    Hi SDN,
    I need assign an equipment (table EQUI) to a class, using BAPI (as CL24N - Assign Objects/Classes to Class ).
    Can you please help?
    Thanks in advance,
    Best Regards,
    Maria João Rocha

    Hello,
    have a look at the following thread. There're some function modules that should fit to your requirements:
    BAPI for CL24N
    Best regards
    Stephan

  • Interface between Legacy and SAP for Equipment Master

    Hello
    I got a requirement where I need to develop a interface between legacy system and R/3 system for Equipment Master Data update in R/3. I am thinking of getting a Idoc file from Legacy and then update the changes or any new creation of Equipments in R/3. I found a standard BAPI for this BAPI_EQUIPMENT_CREATE/CHANGE. This BAPI use a strcture BAPI_ITOB for data record of IDoc. But I got more data from legacy except what we have in BAPI_ITOB. I got Partner Data, Classification data also for Equipments. I am thinking of copying the BAPI to a Z function module and modify the Idoc structure , message type and all to capture all the data and then do a update in same way as standard transaction IE01(Equipment Create) is doing in Batch Input. Do you think if there is any better way of doing this? I am not used to transaction BAPI . just wondering if we Can use that in someway to include our modification?
    Thanks
    Harkamal

    20,000 is on quite higher side for IDOC.
    IBIP help doc says it needs 2 Kbyte for each record, i.e. 40 Mb for 20,000 rec. that should be ok. Since it has structures for Partner & classification data , I don't think u need to modify the BAPI.
    Transaction IE01 - Create equipment
    Transaction IE02 - Change equipment
    Structure - IBIPEQUI Equipment record
                     |->    IBIPNSTA     New status profile if necessary
                     |->>   IBIPSTAT     User status records
                     |->>   IBIPDOCU     Doc. from Doc. management system
                     |->>   IBIPPART     Partner details (comment below)
                     |-->>  IBIPTEXT     (see comment below)
                              for long text:          TEXT_MARK = " " empty
                              for internal comment:   TEXT_MARK = "1"
                     |-->>  IBIPCLAS    Classification record (eqpmt class)
                         |-->> IBIPFEAT     Classification characteristics,
                                               ie. features for the class
                     |-->>  IBIPBDCD     see below (from screen 102)

  • FM/BAPI for MPLA details

    Hi all,
             Is there any FM/BAPI to get the mpla details giving the equipment number.? I need OBJNR field of MPLA.. I have the equnr.. For this I am using a select query :
    1) fetch warpl(M plan no) from mpos giving the equi.
    2) pass the 'WARPL' to MPLA tabel and get OBJNR field..
    But this is not performance efficient. Can u suggest me any FM/ BAPI for this?
    Thanks,
    Vasuki

    Answered

  • Change multi-lingual text for equipment

    Hello,
    I'm trying to change some equipments fields, which are covered in BAPI_EQUI_CHANGE but also update multi-lingual text that can not be updated through this BAPI.
    Is there any other BAPI or FM to update the equipment text?

    Hello,
    There is no separate function module or BAPI for this.
    We have used function modules INIT_TEXT and SAVE_TEXT for this.
    These are generic routines that can be used for all long texts in all languages.
    You always need following key fields for a long text : ID, LANGUAGE, NAME and OBJECT
    To find out these values check one of  your manually created equipments (check header of one of the long texts).
    Also check function group STXD for other usefull function modules.
    Wim

Maybe you are looking for

  • IPHONE 4--I CAN'T HEAR CALLER

    I would just like to say how VERY disappointed and frustrated I am with my new phone.  I upgraded about 6 weeks ago and got an Iphone 4 and that was the worst mistake I've made in a while.  I have already made THREE visits to the AT&T store for probl

  • Save as dialog not showing files on a AFP share in CS2

    I have a user who is not able to see any files or folders on an AFP share (SFM on Windows 2003) when attempting to Save As. The files are visible in the finder, terminal, it is not a permissions issue, and I have trashed permissions. Any ideas? Are t

  • Does labview have drag and drop capability while a program is running

    Suppose I have a cluster with controls of various datatypes on the front panel of one vi. Is it possible to represent that cluster with an icon, and then drag that icon on to the front panel of a second vi? The information in the cluster would then b

  • BUG: domains are stored in wrong file when saving a model

    For a project we use a project specific domain file. When I want to add a domain I first select the project domain file and then add the domain. I can see that this new domain is stored in this project specific domain xml file. However, when I save t

  • Date Validation (yyyy/MM/dd) Using Regular Expression

    Hi Friends, I want to validate date entered by user in yyyy/MM/dd format and for this I want to use Regular Expressions only. Also is there any tool that can be used to generate Regular Expression (for Win2000, Win NT)? Regards, Himanshu Rathore