Bapi for getting work center using receiving order and operation.

Hi Abapers,
could you tell me the name of bapi which takes receiving order , operation
and giving back work center
Thanks in Advance.

Hi,
  Try this one Data_Sales upload
Bye

Similar Messages

  • Bapi for change work center data

    HIi All
                    I need BAPI to change work center data for all categories and work center change transactions .....IR02 ,CNR2,CR02.
    Thanks in advance .

    Hai,
    Try the fm CRAP_WORKCENTER_CREATE
    BAPI_BUS2054_CHANGE_MULTI
    CRAP_WORKCENTER_CREATE
    Regards,
    Venkat

  • Change history of work center in Prodn Order

    Hi All,
    We currently are changing the work center in prodn order via an ABAP program number of times based on various conditions. We would like to know the change history for the work center in prodn order. Is there any <b>transaction or report or function module </b> that we can run for a given prodn order to know these changes. This change info is not captured in AUFK or AFPO or AFKO or logs for Prodn Order.
    We have not activated audit trail for this. Please can anyone suggest a soln for this.
    Thanks

    Hi Bala,
    AFRV table contains  Confirmation pool information. But I am looking for change history for the work center in prodn order. Like after creating the prodn order u changed the work center and then again after release of prodn order u changed it to some other work center (for some particular business reason). I would like to see all this change history.
    Swapnil

  • How to get a list of production orders for a work center?

    Hello SDN Community, 
    I have an requirement to display in a pop-up window a list of production orders for a work center.
    Does anyone know which screens/transactions would show this relationship?
    Or better yet, does anyone know how to demonstrate this from the tables themselves?
    Thank you,
    Dean Atteberry.

    Hello Mangalraj.S
    >>Goto COOIS-->For the field List select PPIOO000 - operations and layout -->standard layout
    >>and execute,by this you will be able to see the operations for each order and to which
    >>work center they are assigned.
    The system I am working on is ECC 6.0.
    For this system the values in the dropdown for the "List" field are "Capacities, Items, Order Headers, Sequences, Trigger Points, etc".  But nothing that says PPIOO000 - operations and layout.
    >>Or else in the in input screen of COOIS,enter the work center for which you want to see which
    >>are the production order's assigned and execute.
    For system I am working in, I do get a grid display when entering a work center.  It has columns like "Order, Material, Icon, Order Type, MRP cntrlr, etc."   But no column with Work Center.
    Any further insight into how to use this transaction to display a list of production orders for a work center would be greatly appreciated.
    Thank you,
    Dean Atteberry.

  • Problem in creating work center using bapi

    hai all,
    i am creating work center using " CRAP_WORKCENTER_CREATE ", it is also getting created successfully when I try to check CAPACITY for capacities and scheduling it is giving a error called.
    " in table T006 entry is missing " . why it is comming like that.

    Hi Goutam/Ram,
        I am trying to create capicity . I am useing CRAP_CAPACITY_CREATE .
       But I am getting so many errors. Is it the right Bapi or do know any other BAPI.
       We are trying to copy Capacities and work center from one plant to other.
    Plz send if you any documentation or code. Also send work order creating code.
    Thanks in Advance.

  • Actual hours done against a work order for a Work Center by non-maintenance

    Hi All,
    I have below question with respect to work center.
    -If there is this actual work hours done on a work order by non- maintenance personnel for a certain work center and same is not reflecting under operation tab of work order, then where & how this hours (done by non- maintenance personnel) for a work order is maintained for that work center?.
    -In which database table these hours done by non- maintenance personnel for a work order is stored by work center wise.?
    Thanks

    Have a look at the document flow button in the order header.
    The confirmation data resides in table AFRU
    PeteA

  • Employee Responsible for a work center

    Good Morning,
    We use Project Systems in order to do project management within SAP.  We use the work center to define the team structure.  I know that there is a place to maintain the person responsible for a work center in the config, but the entry here is a text field.  We are trying to link the owner of a workcenter back to the reporting structure that can be pulled from HRP1001, and a text field makes it more difficult to track this back to the HR side.  We currently enter the name of a manager in this field, and if there is no other place to define the person responsible using a pernr, we'll have to start using this field to enter personnel number.  This will allow ABAP to pull the pernr and trace it to a position number on HRP1001.  I'd like to keep the manager name in this field if at all possible though.  Any help will be much appreciated.  Thanks in advance.

    HI,
    Create a Cost center using T code - KS01.
    Create an activity type using T code - KL01.
    Assign the Rates for an activity type & cost center combination using T code KP26.
    In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal
    Year as 2009,enter the cost center, activity type click on overview screen (F5) & enter the per hour Rate
    After performing this in work center assign activity type & cost center
    should be assigned. Then while creating routing/task list this work center can assigned for performing
    as per the operation time, whichu2019s used by the work center, the cost is getting calculated.
    Overhead cost is the indirect cost which's spent during production.
    So when the cost rollup is taken using T code CK40N (or else using CK11N estimating & CK24 for
    Hope You will get some idea
    Thanks and regards
    E.Rambabu

  • All default routing value has to be changed, while changed the work center in production order

    Dear friends,
    our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
    Thanks&Regards
    Sabhapathy R

    Hi Rahul,
    Thanks for reply. I am maintained in diff value  maintained routing , Ex :First routing i have  work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
    second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
    Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
    Now I think you get to know what the client requirement, kindly do the need full.
    Regards,
    Sabhapathy R

  • Change Work Center during production order confirmation

    Dear All,
    I must to modeling this situation:
    I created an production order. In routing I used an work center A.
    After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
    The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
    My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
    Thank you for your answer!
    Regards,
    Marian

    once a Order is released, the Process order detaisl for that order is frozen.
    however if you want to do it, change the order status to CRTD after reversing the Movements done.
    Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
    if the change is long term.
    or
    Just manually add the new work center and do the processing. if the change is temporary.

  • Work Center in Maintenance Order.

    Hi ,
    Due to Process Change some maintenance work centers become obsolete.
    Can it possible to hide or work center do not see in F4  help in Maintenance order.

    Dear Ashu
    Jogeswara Rao Kavala input is the most suitable in your case however another work around would be :
    If you are using the "Person Responsible" for your work center, then remove the entry from the person responsible for such obselete work center as they will not be used any more and no person will be responsible for their maintenance and co-ordination. This will help in all other reports selection and analysis also.
    While searching for work center(F4 Screen), default the tab "Person Responsible".Now when you select any work center based on person responsible, automatically that work center will be excluded from your selection screen.
    Pre-requisite: You use Person responsible assignment in ALL work centers....
    Other way would be to set deletion flag to this work center so that even if they are included by user without looking into F4 help, system will prevent those work center from including in the work order for further processing.
    Hope this helps
    Regards
    Murad..

  • FM / BAPI for get component overview

    Hi all
    Let me know FM / BAPI for get component overview based on production order?

    Could you please tell us which was the FM? It should be useful for other people -;)
    Greetings,
    Blag.

  • Overhead for each Work center

    Hi all,
    Presently we are calaculating the overhead for the total operations in the service order.Now the requirement is client want to have overhead for each workcenter user in the service order.
    Lets say,there are 3 workcenters were used in the service order with 3 operations.Now instead of single overhead,they want three overhead in the order.I know this is not the right place to post this and I just thought some one could experianced this scenario in their projects.If so pl share with me.
    Regards
    Sureshbabu Arunachalam

    hi
    you can do this provided you have customized the costing sheet as per the requirement .Create separate Activity type for each work center with different cost element .
    while creating the costing sheet create separate base row for the respective cost element and then fix the overhead percentage
    Also kindly consult your CO person on this
    regards
    thyagarajan

  • Block production work center during maintenance order

    Dear Experts,
    iam trying to do the integration between PM and PP, I want to block the production work center from any production order  when there is any maintenance order opened for a certain equipment which is inside this  work center ,
    till now i did the following:
    1) the production work center is now inside the equipment location tab
    2) when i open any maintenance order i put system condition as zero
    now what i only achieved ,
    - in transaction CM25 the capacity is black for the period of the maintenance order
    BUT the work center is not blocked and any production order can be created without any error
    please help and much thanks in advance
    Best Regards

    Hi,
    Till time you have performed right things to integrate PP-PM & system is also responding according to setting.
    Showing block capicity in CM25 against the Maintenance Order.
    If you want to block production order as well, you need to do one more setting.
    go to t- code OIOI, selection Production order types (those you want to block) & in capacity Availabilty choose Collect conversion as 3 : No creation if there is insufficiant caacity.
    i hope this will definately solve your problem.
    - Yatharth

  • FM to get work center information from routing

    Hi all,
    Is there any FM to get work center information from routing?
    Points assured.
    Thanks and regards,
    Nilesh

    Use This FM
    CR_WORKSTATION_READ_ROUTING,ROUTING_DISPLAY
    Use table CRHD ,MAPL
    Please reward if useful.

  • Mass change of work center in production order

    Dear All,
    Is it possible to mass change work center in production order, i.e. i have around 100 production order of which i have to change the work ceter assigned in particular operation .
    Thanks and regards
    Manish

    Hi Manish,
    If you have not posted any activity or goods to the production order, then in header click on Functions -> Read PP Master Data.
    The order will now read the routing with the new work centers, provided the same has been changed.
    If you have posted some activities or goods movement done, then its a manual process.
    Hope the above answers your query.
    Regards,
    Vivek
    Added
    If in case you have posted some goods or confirmed some activity, check if you can reverse the same, re-read the routing & then post back the goods.
    Edited by: Vivek on Feb 24, 2009 12:22 PM

Maybe you are looking for