Bapi for MB1A using the AFS SKU details

Hi Friends,
I want to use the BAPI, BAPI_GOODSMVT_CREATE with AFS SKU details.
my requirement is to post the return qty against the Batch using MB1A with movement type '262' , against the production order, material , SKU details and Batch no.
please send it to me if u have the BAPI program.
Thanks
Shankar

Hi
Mostly, we have individual BAPI / FM to complete the setup for creation of Production Order. you may consider the Option of using BDC to create the Order automatically using all master data (instead of manual).
Thanks
JK

Similar Messages

Can i use the debit card details for payment in the itunes store

can i use the debit card details for payment in the itunes store

Debit cards are no longer accepted in the iTunes Store, it seems. The current valid payment methods are listed here:
http://support.apple.com/kb/HT5552
You can try contacting the iTunes Store and asking if there is any way to use your card, but they probably will tell you that it's not possible.
http://www.apple.com/emea/support/itunes/contact.html
Using a debit card in any online service where it stores your card is a bad idea in any case since if someone gains access to your account in the service, they can quickly drain your bank account. Credit cards limit your liability, as do prepaid iTunes cards.
Regards.

BAPI for Creation of the Project in ECC using Standard Templates

Hi,
I want BAPI for Creation of the Project in ECC using project id and project standard template ID
and BAPI for Updating of project and WBS element using project id and WBS element ID

One idea is to write a wrapper FM that is remote enabled and internally call BBP_PD_CTR_CREATE for your own use.

BAPI for return/supplement the funds for both overall and fiscal year.

I have a development requirement for following and I am new to Investment ,management and Project
Systems functionality.
Your help will be appreciated
The new transaction will use the upload data to create returns and/or supplements to Marketing budgets. The following is what the transaction will do per request:
     Verify funds are available to shift. The program will do this by creating an error log for items that do not meet this criteria. The program will process all line items that have available funds (IM52).
Q pls let me know what BAPi/FM to use to verify whether funds are vailable or not
     Return the funds for both overall and fiscal year (IM52).
Q Pls tell me BAPI for same
     Supplement the funds for bother overall and fiscal year (IM52).
Q BAPI for same
     Deactivate the availability control for the WBSEs affected (CJBW).
Q How to do that and BAPI/FM for same
     Activate the availability control for the WBSEs affected (CJBV).
Q How to do that and BAPI/FM for same
     Add appropriate text from the data in the upload spreadsheet (this may be a concatenation of data from the columns in the upload) (IM52).
       Not clear what user is trying to say
     The transaction needs to be able to handle whole dollars as well as numbers that might include up to two decimals: e.g. .01 (IM52).

I am answering my own question since i completed the above development by using the FM KBPV_POST_DATA .
It will post to all the BP tables and is tested successfully.

BAPI for DELETION of the Purchase Requisation entry from DB?

Hi Experts,
1) Pls. let me know that, Wht is the good BAPI for DELETEion of the Purchase Requisation entry from the Data Base.
The tx code is ME52N(BAPI_REQUISITION_CHANGE, BAPI_PR_CHANGE)
2) pls. also let me know the INPUT PARAMETERS for the suggested BAPI
thanq
Edited by: Srinivas on May 7, 2008 12:20 AM

You can use this BAPI to delete PR line item.
BAPI_REQUISITION_CHANGE
BAPI_REQUISITION_DELETE
Chk this for sample.
work flow object type for purchase requisition

BAPI For listing alternative routing with sequence details.

Dear all,
I want to use BAPI For listing alternative routing with sequence details.
Pl' tell BAPI function Module for routing .
Thanks.

I am not sure ,but check with BAPI_ROUTING_CREATE

I purchased a song through iTunes on my MacBook which I have owned for years using the same Apple ID and all of the sudden I am not authorized to listen to this song only? Why? How do I fix it cause it's making me very mad...

Just purchased a song through iTunes on my MacBook which I have owned for years using the same Apple ID and all of the sudden I am not authorized to listen to this song only? Why? How do I fix it cause it's making me very mad...

Hi E_WM7,
Welcome to Apple Support Communities!
Take a look at the article linked below, it provides suggestions that may be able to resolve the authorization issue.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
-Jason

Passing two variables in the body of the URL using the go to detail page SB in ASP

Hi all,
Would appreciate your assistance with the following, I'm
trying to set up a go to detail page sb that passes two variable in
the body of the URL rather than the standard one.
The code i've tried is -
<td><A HREF="gggggggtest.asp?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"PCL2ID=" + othermenutwo.Fields.Item("PCL2ID").Value
%>&"PCL1ID=" +
othermenutwo.Fields.Item("PCL2PC1ID").Value
%><%=(othermenutwo.Fields.Item("PCL2Description").Value)%></A></td>
Where the PCL1ID and the PCL2ID are the variables
The normal code generated by the go to detail page sb with
one variable is -
<td><a href="ggggggtest.asp?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"PCL2ID=" + othermenutwo.Fields.Item("PCL2ID").Value
%>"><%=(othermenutwo.Fields.Item("PCL2Description").Value)%></a></td>
Unfortunatley my code tweaking isn't working as the second
variable isn't being sent, any help would be gratefully appreciated
Thanks

Instead of using DW's 'go to detail page' option, simply set
up the link the manual way in DW using the Link browser. Select the
file you want to link to and then use the parameters button at the
bottom of the 'Select File' dialogue to set the parameters to be
passed with the link. You can then manually set the name of the
parameter to be passed and then select its value from a recordset.
The key thing is that you can set as many parameters as you like,
so you can set both the parameters you want.
On the detail page you then filter by the parameter name you
chose (or both).
Personally I always code links this way rather than using the
go to detail page option as you get much better control of what is
going on.

During video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

during video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

I know. Same issue here. When I'm not recording but have the video camera on, the autofocus works fine. As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus. I haven't used the camera all that much because of this problem.

Storing the output of BAPI for further use in Webdynpro application

Hi,
In my webdynpro application, a BAPI_A is called multiple times from a backend.
All the previous outputs of the BAPI_A need to be stored in the webdynpro application as they serve as a complete set of input parameters for BAPI_B at the end.
Can anybody shed light on this temporary storage mechanism of the outputs of the BAPI_A.
Regards
Meesum

Hi Meesum,
Your BAPI structure
BAPI_A
--Output (0..n)
Field1
Field2
Field3
Field4
Value node structure
vnBAPI_A (0..n)
--vnResult (0..n)
vaField1
vaField2
vaField3
vaField4
1. Declare objVnBAPI_A (between begin and end)
2. Initialize in the vnBAPI_A in the wdDoInit()
3. After each execution of the BAPI (BAPI_A), create the vnResult and populate the fields of vnResult (from the BAPI_A --> output)
4. Add the vnResult object to objVnBAPI_A
Hope this should help you.
Regards,
Santhosh.C

Bapi for MB1A

Dear all....
Im using the BAPI 'BAPI_GOODSMVT_CREATE' and the movement code '03' for Goods Issue.
The material document is getting created...The problem is the data is not getting reflected in the table RESB. So even after the BAPI commit, the
Requirement Quantity(BDMNG) is not getting reduced and the Quantity Withdrawn(ENMNG) is not getting increased....However if i do a partial or complete goods issue manually (thro MB1A) the data is getting updated in RESB.....
Kindly let me know what shud b done........

Hi,
Iam abale to create a goods issue with the same data.
The only difference i see when i create through MB1A, in the initial screen i see the collective slip has been selected and in the second when i give the cost center and hit enter it brings up the buisness area and then when i save it it creates a document number.
I tried passing the buisness area but iam getting same error.
If it work through mB1A then it should work through the BAPI RIGHT?
tAKE A LOOK AT MY BAPI CODE AND LET ME KNOW IF IA M MISSING ANYTHING IN HERE
tHANKS

Help need with bapi for mb1a

Hi all,
iam creating a good movement with 201 using bapi. I created manually with the data in the t code MB1A. LATER I TRIED WITH THE SAME DATA IN PROGRAM BY PASSING THROOUGH bAPI
BUT FOR SOME REASON IAM GETTING AN ERROR SAYING
EKI                  222Cost center ABCD/12345 does not exist on 03/28/2007.
but this cost center is valid till 9999. I never passed ABCD what is that?
I TRIED WITH SAME COST CENTER IT WORKED WHILE CREATE MANUALLY WITHT THE SAME DATA IN mb1a T-CODE.
tHIS IS MY CODE LET ME IF IAM MISSING ANYTHING
data: gm_header type bapi2017_gm_head_01.
data: gm_code    type bapi2017_gm_code.
data: gm_headret type bapi2017_gm_head_ret.
data: gm_item    type table of
                 bapi2017_gm_item_create with header line.
data: gm_return type bapiret2 occurs 0 with header line.
data: gm_retmtd type bapi2017_gm_head_ret-mat_doc.
clear: gm_return, gm_retmtd. refresh gm_return.
Setup BAPI header data.
gm_header-pstng_date = sy-datum.
gm_header-doc_date   = sy-datum.
gm_code-gm_code      = '03'.                                " MB1A
Write 971 movement to table
clear gm_item.
move '201'                 to gm_item-move_type     .
move '90998' to gm_item-material.
move '1'     to gm_item-entry_qnt.
MOVE 'EA'    TO GM_ITEM-ENTRY_UOM.
move 'PNT' to gm_item-plant.
move 'PPNT' to gm_item-stge_loc.
*MOVE '0901'   TO GM_ITEM-MOVE_REAS.
move '12345' to gm_item-COSTCENTER.
append gm_item.
Call goods movement BAPI
call function 'BAPI_GOODSMVT_CREATE'
     exporting
          goodsmvt_header = gm_header
          goodsmvt_code    = gm_code
     importing
          goodsmvt_headret = gm_headret
          materialdocument = gm_retmtd
     tables
          goodsmvt_item    = gm_item
          return           = gm_return.
if not gm_retmtd is initial.
commit work and wait.
call function 'DEQUEUE_ALL'.
else.
commit work and wait.
call function 'DEQUEUE_ALL'.
endif.
write:/ gm_retmtd.
loop at gm_return.
write:/ gm_return.
endloop.
Thanks

Hi,
Iam abale to create a goods issue with the same data.
The only difference i see when i create through MB1A, in the initial screen i see the collective slip has been selected and in the second when i give the cost center and hit enter it brings up the buisness area and then when i save it it creates a document number.
I tried passing the buisness area but iam getting same error.
If it work through mB1A then it should work through the BAPI RIGHT?
tAKE A LOOK AT MY BAPI CODE AND LET ME KNOW IF IA M MISSING ANYTHING IN HERE
tHANKS

Steps for re-using the same user id of a deleted user in OIM 11g ?

Hello experts,
By Default, in OIM 11.1.1.5.0 it is not allowing to re-use the same user id of a deleted user.
Consider a user with user id as "ABCD1234". The user is deleted from OIM and it is not getting displayed in the user search. But in DB we could see that user details with "Deleted" status. Say accidently this hard delete has happened .
How do we create that user again with same user id ?
What is recommended for such scenario ?
Thanks,
DK

I suggest disable the unique index instead of dropping it using ALTER INDEX <INDEX_NAME> DISABLE command.
Better way to handle this do below
1. disable index
2. update usr_login for deleted user using sql query eg. xx|usr_login and commit it ( update usr set usr_login='xx'|| usr_login where upper(usr_status)='DELETED')
3. enable your index
4. now login to OIM and easily you can create user with the previous user login
In this case your Index is still enbaled so it won't hamper the performancem, because this index is being used in various places for user search.
NOTE: disable any other constraints if required. But, I don't think so. Just disabling unique index will allow you to update"
--nayan

I recently updated my iTunes to the new version. For some reason the titles and details of songs on the SONGS page do not appear, although the songs will play. Has anyone else had this problem? Every other page seems to be ok.

I recently updated my iTunes to the new version. When I opened it I found that there were no details listed on the SONGS page. On all other pages the relevant pictures/details appear. Although there are no details showing on the songs page, the songs are obviously there as when you click on a line it plays the song that should be listed. Has anyone else had this problem? (I am using a Windows XP Pro system on my Laptop).

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

RFCs / BAPIs for complex use case - offer and account receivable

Hello,
a scenario for testing purposes requires me to make remote function calls.
I found almost everything I need in the IDES system I am accessing.
What I am still missing, are RFCs or BAPIs to do the following
- after selecting materials to be sold and after providing a pricing I would like to create an offer, proposal, or quote
- after creating a bill, I would like to create and later close an account receivable item
Can anybody help me on finding appropriate remote functions or BAPIs?
Thanks in advanced
Stefan
PS: If you need more context, here is what I got so far
- create and lookup customers using BAPI Customer
- material availability and price check using BAPI Material
- create a sales order using BAPI SalesOrder
- create a shipment using BAPI Shipment
- create a bill using BAPI ItCustBillingDoc
hope that makes sence

Hi Stefan,
To find the BAPIs you need, use transaction BAPI in R3. Creating the quotation, for example, can be found in Sales>Customer Quotation>Create From Data which gives the function "BAPI_QUOTATION_CREATEFROMDATA". Using the same found General Accounting>Accounting Interface>AccntgBilling-->Post(etc) leading to "BAPI_ACC_BILLING_POST".
Regards
Gareth

Bapi for MB1A using the AFS SKU details

Similar Messages

Maybe you are looking for