Bapi for posting FI documents for new General ledger accounting

Hi,
We have a requirement for posting FI documents for new General ledger i.e for transaction FB01L. Is there any BAPI for the same so that BDC can be avoided.
The BAPI "BAPI_ACC_DOCUMENT_POST" is used for FB01. Can we use it for FB01L?? As in this BAPI ledger group field is not there. Please suggest.
Thanks in advance.
Regards,
Gaurav

Hi Sandra,
Solved myself using the below options.
If you are using the BAPI - BAPI_ACC_GL_POSTING_POST, you can pass accounting principle field in importing structure BAPIACHE08. The relation between Legder group & accounting principle has to be configured in SPRO by FICO consultant. Once they configured in the system, get the accounting principles and then pass the accounting principle .
Code: s_documentheader-acc_principle = wa_header-acc_principle.
Reward me if this will help you.
Thanks,
Yerukala Setty

Similar Messages

Document on New General Ledger Accounting

Hi SAP Gurus,
Can anyone help by providing the following details relating to General Ledger Accounting (New):
1. What are the advantages of New GL accounting
2. Any Bearing on Controlling Module. If so, what they are (like no need of Cost Element Reconciliation)
Tnaks in advance
B Surya

The following are the advantages of New GL Accounting;
1. On-line document splitting. Real time integration of CO=>FI
2. New GL replaces the SPL (Special Purpose Ledger) to some extent and not 100%
3. CO Reconciliation is not required due to on-line splitting
4. Parallel Accounting
5. Segment Reporting.
Best Regards,
Chandra

Active new general ledger accounting

Dear all,
We use SAP several years, after we upgrade to ECC5.0, I would like to active new general ledger accounting. In the SAP training material (AC210), it said that this action should be performed at new year, not mid-year. however, if I active it, what should I considering? or we can not do that?
thanks
Ben Wu

Hi,
The New GL a/c has some unique features such as document splitting so that the asssignments to the Business -area [ for example] will be balanced.If this is activated in the year beginning the assignments will be consistent.The Business _Area Balance sheet will be a balanced one.On the other hand,if you activate in the mid-year [ after the commencement of the posting documents] this consistency will be lost[ as the already posted documents will be deprived of the New-GL a/c advantages;thus rendering the advantage of NEW-GL ineffective.
Hope this helps.
Regards,
Ramesh

New General ledger accounting in ECC 6.0 : Profit centre not in BSID table

hi,
I already create new transaction code and report from standard transaction code
*s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items)* and i
also add Profit center fields into Dynamic selection.
My problem is, if i run the report using customer account the output is displayed but
if i run the report with customer & profit centre the output is not displayed. currently i'm using
new General ledger accounting in ECC 6.0 and when i look into bsid table the value
is empty for profit centre and the value for profit centre are stored in new table
FAGLFLEXT.
do i miss something?
thanks.

s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items) this is a report generated.

De-activate the New General Ledger Accounting

Dear All,
I would like to inform to you all that I had activated the "New General Ledger Accounting through the T.code: FAGL_ACTIVATION in the sand box client".
Now I would like to de-activate the function. Because, it gives some inconveience that the company has upgraded to ECC 6.0, but does not use the New GL concept.
What should I do for this de-activation?
I request you all, please kindly help in this regards.
Thanks with regards,
Ran

Hi,
I am trying to deactivate the New GL but getting an error "view/table v_fagl_activec can only be displayed and maintained with restrictions."
Please help to resolve this problem
Regards,
Narayana

Migration to New General Ledger Accounting

< MODERATOR: All points have been UNASSIGNED and the message locked. Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email.>
Hi,
can any one send me the documents related to Migration to New General ledger accounting new concept in sap ecc 6.0. and also docs related with this concept like segment, business area, profit center accounting.
email - [email protected]
Thanks
Devendra Saboo

Hi Supriya gaaru
pls send me too the docs
[email protected]
and
[email protected]

Bulk move of cheques to new general ledger Account

In my work I have been required to bulk move cheques from a particular GL account to the correct Account. I can do this manually which is extremely time consuming typing in each cheque transaction to a new cheque clearing Account.
What is the quickest way of doing a bulk move so that the left hand indicator icon in I think F-03 changes from RED to GREEN.
Can someone please help me the version of Sap is R 3

Hi,
Important OSS notes concerning New General Ledger (NewGL) in mySAP ERP :-
741821 Release limitations concerning SAP ERP 2004
756146 mySAP ERP NewGL: General information
779251 mySAP ERP NewGL : Parallel accounting
862523 mySAP ERP NewGL : new functions as of SP 10
890237 New GL with document splitting: Legacy data transfer
891144 New GL/document splitting: Risks of subsequent changes
918675 Basic architecture of the NewGL accounting
812919 mySAP ERP NewGL : migration
826357 Profit Center Acc. and NewGL in mySAPERP
852971 SEM-BCS: Integration with the NewGL
820495 mySAP ERP New GL: Data volume and parallel ledgers
Rgds.

FAGLGA35 - Actual Distribution in New General Ledger accounting

Dears,
In transaction FAGLGA35, system gives below mentioned messages :-
i) No valid sender entries were found. Message no. GA710.
Diagnosis
The system did not find a valid sender for cycle 0LZAWL, segment AWL. The problem can be due to the following reasons:
Master data checking for cycle 0LZAWL, segment AWL, found no valid senders for this segment.
The senders are valid from a master data standpoint, but the system found no posted values or quantities in the database corresponding to your selection criteria. The sender and the segment will be processed only if the cycle works iteratively and at least one sender in another segment receives values which it can then allocate iteratively.
In cycles for indirect activity allocation, this message appears if segment AWL is to allocate posted sender activity quantities but the sender has been completely scheduled. Complete scheduling of posted activity quantities occurs, for example, if you use cycle AWL in a test run but already used it in a current real processing run in the system.
System Response
The system cannot process the segment.
Procedure
Check the definition of segment AWL in cycle 0LZAWL. In particular, check the validity of the sender master data for the settlement period.
To do so in cycle maintenance, choose "Formal check".
If segment AWL allocates posted values or quantities, the senders in the segment are valid only if:
The sender holds actually posted values/quantities not equal to 0
The cycle is iterative, and the sender receives values in another segment which it can then allocate iteratively.
If necessary, you must set the iteration indicator in cycle 0LZAWL.
In a cycle for indirect activity allocation, check whether the cycle is currently in use for posting in the system sender in segment AWL and thus completely schedules the senders in segment AWL.
If this is the case, cancel the cycle and repeat the cycle execution.
As per message solution, i do all the things but the same message comes.
ii) Cycle 0LZAWL, start date 20080401, does not include any senders.
Message no. GA749
Diagnosis
No senders were found for cycle 0LZAWL, starting date 20080401.
System Response
It is no longer possible to create receivers and assign senders for the segment.
Procedure
Check the definition of the cycle in the maintenance transaction for Actual Distribution: General Ledger. No valid sender cost centers could be found to match your selection.
If you use the sender rules "Posted amounts" or "Posted quantities", check whether records exist in the database for the criteria you entered (cost element, version...)
During indirect activity allocation with the sender rule "posted quantities", you should also note that only the difference between the planned/posted activity allocation and the scheduled activity quantity is allocated. If you entered activity types as sender, you should at this point also check the activity type category. For those quantities posted with an activity type of category 1 (manual entry, manual allocation) no indirect activity allocation is possible.
1. If this is an allocation in the FI/FI-SL area, the problem could also be due to the inheritance logic for FI-SL totals tables, whose "Inheritance of sender based on the receiver" indicator is activated in the "Partner object update" view (T811U-INHERSRC). These are tables that were installed before Release 4.6A.
Use transaction GCA8 to check this, and see the section on:
Inheritance Logic for Allocations
then correct the affected cycle, if required.
Is anybody have any solution. Please suggest it.
Regards,
Kalpik Shah

s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items) this is a report generated.

Deactivate new General Ledger Accounting in ECC 6.0

Hello All,
I have activated the new gl accounting by following path tcode>spro>fi accounting>fi accounting general settings>activate new gl accounting.
How to deactivate the same????
Thanks,
Sunny

You can use the transaction code FAGL_ACTIVATION to deactivate New GL
I hope its answer your question

F.05 Posting for general ledger account .......[Error]

Hi expert,
I am running a transaction in F.05 and encounter several error messages such as:
1 Incorrect account determination: ABC 11111 >> No performance Assistant message
2 Enter account number with a maximum of 10 characters No performance Assistant message
3 Posting for general ledger account 11111 amount >>
Performance Assistant message prompt:
Posting for general ledger account 11111 amount 199,999.00 set in batch input
Message no. FR008
Diagnosis
In an evaluation that affects the financial statements, the posting for company code ABC and G/L amount 199,999.00 SGD, could not be carried out.
System Response
The posting is entered in a batch input session.
Procedure
Correct the error, for example, missing account determination, and run the batch input session. This ensures that the posting and the evaluation difference noted in the documents agree again.
Please advise.
Thank you!

1. Financial Accounting (New) > General Ledger Accounting (New) > Periodic Processing > Valuate > Foreign Currency Valuation.
Check your settings
2. Check if how you have defined you account groups in OBD4. Most probabaly you have defined 10 digit account length.
3. Check if the document type is relevent only for batch input.
Rgds
Harmees

Define field group in general ledger accounting

what is the use of 'define field groups', which comes under general ledger accounting- master date- additional activities, & how can we assign it?

Dear Siddhi,
In IMG under
Financial Accounting -> General Ledger Accounting -> G/L Accounts -> Master Data -> Preparations or
Financial Accounting (New) -> General Ledger Accounting (New) -> Master Data -> G/L Accounts -> Preparations
Field groups:
Screen Fields are grouped into field groups. Field Status would idnentify the staus of particular field where as field status group would identify the status of group of fields.
Example:
Account control
Account managemen
Document entry
Bank/financial de
Interest calculat
Joint venture
These groups would intern have fields.
When creating a G/L account, you must specify an account group.
The account group determines:
o   the interval in which the account number must be
o   which fields are required and optional entries when creating and changing master records
o   which fields are suppressed when creating and changing master data.
It enables you to control the layout of screens.
You use account groups to combine accounts according to the above criteria (for example, a P&L account group, asset account group and material account group).
Hope this will help.
Regards,
Naveen.

Deffered tax node not available in General Ledger Accounting

Hello,
I want to custumize deffered tax programme but the node
:General Ledger Accounting  Business Transactions  Report  Sales/Purchases Tax Returns  Deferred Taxes
is not availabe.
Please suggest what steps are needed to make it available.
ours is ECC 6.0.
Regards
Tushar

Hello,
You might check following path:
Financial Accounting (NOT NEW)
General Ledger Accounting
Business Transactions
    Closing
     Report
      Sales/Purchases Tax Returns
        Deferred taxes
Best regards

BAPI for General Ledger Accounting.

Does anyone knows if a BAPI or function that can create and posts documents for GL (general ledger accounting) exists?
I have been looking on the BAPI explorer but I'm not sure is one of the Bapi's listed under GL can do that.
I wrote a program using a batch input for trans FB01 but when process the session found some inconsistencies. The behavior of the the screens and fields is different when I process the BI session as when I did the recording.
So I decided to find a BAPI that can do that instead of a Batch Input.
Any help will be appreciated,
Orlando.

Hi Orlando,
Check if this can serve your purpose
BAPI_ACC_GL_POSTING_POST
Regards,
Ravi

Using FM PRELIMINARY_POSTING_FB01 for Posting a Document

Hi there,
Can we use FM PRELIMINARY_POSTING_FB01 for Posting a document? Has anybody done that? Please let me know which of the following needs to be populated? Thanks a lot.
(TEXT_UPDATE)
TEXT_ITEM_UPDATE)
(I_UF05A)
(I_XCMPL)
(FS006_FB01)
(I_TCODE)
(I_PARGB)
(I_TCODE_INT)
Does anybody have any documentation/help on this FM? Please let me know - as I need to do this sometime next week.
Edited by: sam jose on Apr 29, 2010 4:50 PM
Edited by: Rob Burbank on May 5, 2010 10:13 AM

Dear Sam,
You can Use the bapi BAPI_ACC_DOCUMENT_POST. By using the extension tables of the BAPI when creating the accoutning documents you will pass all the fields you did not found on the standard tables.
Now, you will use the BTE (Business Transaction Event) RWBAPI01 : SAMPLE_INTERFACE_RWBAPI01, and you will find all the data you fill in the tables Extension in the bapi, and you have to transfer it to table IT_ACCIT.
You can fill even specific fields of table BSEG if you want.
Regards,
Yassine NEJMY

Error in posting Inventory documents for a serialized material

hi.,
Can someone update me the reason for:
1. Error in posting inventory documents for a serialized material
What are the steps to be followed during the
1. Creation of Serialized material
2. Creating a Purchase document for a serialized material
3. Generating a G/R for a serialized material.
4. Generating an inventory document for a serialized material.
Any update is much appreciated.
Tx.
Mahesh

Hello Mahesh,
Let me try to answer your queries.
1. Generally, how does the flow of Cycle counting go w.r.t to the Indicators A.B.C and D which has been configured in OMCO.
Would that be as per the Consumption/usage of the materials?
The following link will help to understand the cycle count process
http://help.sap.com/saphelp_46c/helpdata/en/4d/2b8e3d43ad11d189410000e829fbbd/frameset.htm
2. How are the indicators of A,B,C,D to be set up for the other materials in the particular plant which have not been fixed as CC.
If you run the MIBC (Set ABC indicator) report, it will automatically set the ABC indicator based on your selection parameter.
3. How does the system take up the inventory count for materials that have not been flagged as CC Fixed.
Cycle counting inventory will be carried out only for the material with ABC indicator for cycle count, if you exclude the material from MIBC report or manual ABC setting then that material will not be considered under cycle count when you execute MICN report to create cycle count inventory doc.
4. How does the sytem take up the inventory count for materials for materials which have been flagged as Fixed.
Material with CC fix indicator means when MIBC report will not change CC indicator for that material with fix indicator, so when you run MICN report at that time system will take last inventory date from MARD table for that material and calculate the next due date based on ABC indicator in material.
Hope this helps.
Regards
Arif Mansuri
Frankly speaking I also dont know the process for rewarding the points, I put only one question so far but with no reply, so never got a chance to assign rewards.
But there is a way always, this link will help you..
https://www.sdn.sap.com/irj/sdn/crphelp#posted

Bapi for posting FI documents for new General ledger accounting

Similar Messages

Maybe you are looking for