BAPI for Routing and recipe??

Hi Gurus,
Kindly let me know the standard BAPI's available for routing and recipe.??
Thanks in advance.
Regards
Naveen.

Dear
BAPI for routing :
1.BAPI_ROUTING_CREATE :
Refer all the BAPIs for farther information in our expert posting : Re: BAPI_ROUTING_CREATE
BAPI for master recipe:
1.MRTRS300_MASTER_RECIPE_SAVE
2.BAPI BAPI_QPMK_SAVEREPLICA
3.BADI CPS_EXECUTION_D or BOM_UPDATE
4.CP_DIG_SIGNATURE or CUSLNTRTO_ADDIN
Regards
JH

Similar Messages

Routing and Recipe differences

Can any one explain the differences of Routing and Recipe.

Hi
In the routing part you maintain the operations/phases, like Reaction, Workup, Packing etc. You specify which resources you use, consumptions of activities, like Fixed cost, Energy (if not maintained as materials) etc.
You' also specify relations between the different operations, like Work up starts 1 hour after the reaction is complete.
Recipe refers to the Manufacturing process for Process Industry, this is analogous to combination of Routing and BOM in Discrete Industry.
Mainly Master Recipe will contain Phases linked to Resources, control recipe destination, Material list etc.
You can also link up a set of Process instructions, creating a PI-sheet. Confirmations also can be carried from pi sheets.
regards
Srinivas

Can u tell me any predefined BAPI for change and creation of Material

Hi,
Can anybody tell me predefined BAPI for change and creation of Materialmasterand Pricing?
Thanks & regards,
Gopianne.

you can use the BAPI to BAPI_MATERIAL_SAVEDATA create as well as to change material master.
When changing material master data, you need enter only the material
number.
In the header data, you must select at least one view for which data is
to be created. Depending on the view selected, you must maintain other
required parameters. If you do not enter values for all of the required
parameters, the method is ended with an error message.
The corresponding fields in the tables (such as CLIENTDATA) must first
be supplied with data by the calling program. An indicator must also be
set for each of these fields so that the data is written to the database
by the method. This requires the calling program to supply the
corresponding field with the indicator in a checkbox table (for example,
CLIENTDATAX). Checkbox tables exist for tables that do not contain any
language-dependent texts (MAKT, MLTX), International Article Numbers
(MEAN), or tax classifications (MLAN). Several data records for a
material can be created in these tables.
regards
vivek
reward points if it helps

LSMW for Routing and Reference Operations

Hello Experts,
I am working on data transfer for Routing and Reference Operations (TCode CA01 and CA11).
I found one LSMW for Routing provided by SAP but didnt found for Reference Operations. Does anyone has more stuff related to Data transfer for Routing and Reference Operation.
Please share with me. My email id is [email protected]
Thanks in Advance..
Harkamal

Hi Harkamal,
Check the programs:
RCPTRA01
RCPTRA02
Go to SE38 .
GIve the name of the program.
Choose the Documentation radio-button.
Click Display.
It is pretty well documented.
Regards,
Ravi Kanth Talagana

BAPI for COWBPACK and COWBHUWE

Hi Everybody,
I'm having the same dilemma, I would like to use external numbering with COWBPACK, but it seems to be imposible in standard SAP. Also I need to find a BAPI or function module for HU transactions COWBPACK and COWBHUWE
¿Could you find a BAPI for COWBPACK and COWBHUWE?
Thanks in advance for any kind of help.
Best Regards,
Favio Del Castillo.

Hi,
BAPI_GOODSMVT_CREATE
BAPI_ACC_GOODS_MOVEMENT_CHECK
BAPI_ACC_GOODS_MOVEMENT_POST
with regards

BAPI for COSS and COSP Table to Create and Update

Hi,
Is there a BAPI for COSS and COSP for creating and/or updating these tables?
Thanks

hi ,
u dont have any bapis for updatign specific tables
bapis are generally used for updating a transaction i mean number of tables
where is the use of the tables u can search bapis in transaction bapi
and where are the tables used i guess in fi/co so u can search under them
regards
afzal

BAPI for MR22 and KO88

Hi friends,
Please, can body give some BAPI for MR22 and KO88.
Regards
Marcelo

Hi friends,
Please, can body give some BAPI for MR22 and KO88.
Regards
Marcelo

Bapi For creation and change for Vendor Master and Customer Master

I am looking for BAPI to create and change Vendor Master and Customer Master which will not take me to standard SAP transaction but will work in the background
Explanation: BAPI to delete material (BAPI_MATERIAL_DELETE) take you to standard SAP screen of T-Code MM06 but BAPI to create material (BAPI_MATERIAL_SAVEDATA) creates material in the background i.e. does not take you to standard SAP screen of T-Code MM01
So in my case (i.e. to create and change Vendor Master and Customer Master ) I want BAPI which would work like BAPI to create material (BAPI_MATERIAL_SAVEDATA)

For general information,to find BAPIs associated with any business object :
Transaction : BAPI - choose alphabetical tab - Find customer - (right side choose - tools - create bapi list and search ) , you will get all the BAPIs associated with this particular business object
Mathews

BAPI for Picking and Post Goods Issue ?

Hi All,
Is there any BAPI for doing Picking and Post Goods Issue in VL02N ? I don't think we can use BAPI_OUTB_DELIVERY_CHANGE.
Is it advisable to use BAPI or BDC ( if no BAPI exist ). Thanks in Advance.

BAPI for picking in VL02N
BAPI_OUTB_DELIVERY_SAVEREPLICA
BAPI for posting Goods Issue
BAPI_OUTB_DELIVERY_CONFIRM_DEC
For reference: http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/LEIDW/LEIDW.pdf

Trying to create a password for router and wireless adapte

I was reading through alot of posts and just couldnt find an answer that worked.
I have a linksys wireless router, never had a pass set up on it, and lately
I find someone is connecting to my internet and I would like to put a password
on it. I found these instructions... but it wouldnt accept admin as the password
to allow me to create a new one. I followed these instructions.
"The default password of the router is admin. If you have set up a password before, it will not recognize the default admin.Hold the reset button of the router for 10secs and it will retrieve the default admin...To change the default password, lauch internet explorer(pc should be connected to the router hardwired), type on the address bar, 192.168.1.1--it willl prompt for a username and password, leave username blank and password will be admin...It willl bring you to the set up page of the router..click on the administration tab and from there you can create your new password for your router... To encrypt the wireless network refer to our website, www.linksys.com/kb and search for answer id 759...it will walk you through with the process..."
I am using windows XP for OS and the Wireless G? The router is on my main PC
and the adapter is on my other PC. How do I go about obtaining a password on this? The Model # for the wireless piece is WMP54G not sure what it is on the actual router.
Message Edited by FullSmile on 09-17-2006 11:11 PM

If the router is not accepting the default admin password even after a reset of 10 sec you can hold down the reset button for 30 sec and if that doesn't work even,the other options would be to change browser settings,try a different comp, try upgrading the firmware of the router through tftp.exe.You can download the tftp.exe file from ftp.linksys.com/pub/network.

Standard BAPI for PO and PREQ Rejection

Hi All,
Do we have a standard BAPI for PO Rejection and Purchase Requisition Rejection?
Regards,
Murtuza

The standard process is that you should configure the sales order as Third party sales order (or Inter company SO-PO process whatever is the requirement here) then Purchase requisition will be created automatically when the sales order is saved. You can then create PO with reference to the Pur.req. The item category TAS is configured in standard SAP for Third party / inter company processing requiring SO - PO process.
A PO in a third party/inter company SO-PO process is linked to SO through Purchase requisition and the linkage happens at item level because a single sales order can have both PO related items and items that are directly delivered and billed.
You can refer these links
how to configure third party order ?
http://sapsdforum.com/2007/10/23/third-party-order-processing/

BAPI for J1IEX and MIRO

Hi Experts,
Is there any BAPI for J1IEX (Excise capturing) and MIRO posting.
Regards,
Hanuman.

Hi Hanuman,
Pls. find below the Bapi for MIRO,
Bapi_incominginvoice_create
bapi_transaction_commit
Award if helpful.
Regards
Rifaie.M

Bapi For Bom and material Bom in cs71

Hi,
In CS71 we have 2 pushbuttons on the top ie create/copy BOM and create/copy Material BOM. for these 2 funtions i need Bapi or FM for the functionality of those 2 pushbuttons.
Duplicate thread Continue with this one - Re: How to search for BAPI or FM for some requirement
Edited by: kishan P on Aug 20, 2010 11:54 AM

I tried to find BAPI for transaction CS71, but it seems that its no available.
Try using BDC method for the same.
Regards,
Lalit Mohan Gupta.

BAPI for CJ9FS and CJ20N

Hi folks,
I have a controlling Requirement to copy one Planning version of the project to other version(Which is done in standard by CJ9FS) and then set the project status (Say X)for the objects obtained after copying the version.
The project status will be set in transaction CJ20N.
The business doesn't want to use the enhancements of CJ9FS.There should be dedicated transaction for this whole process.
If i can get some FM/BAPI for both the transactions,Then the job will be simple.Else i have to copy the standard tcode CJ9FS which does the Planning Version copy and then collect the objects(records displayed in the list ) and use BDC program for CJ20N to set the status.
Could you please suggest the better approach for this kind requirement.
BR/Balaji
Edited by: Balaji Meda Ramamoorthy on Oct 10, 2011 10:11 AM

HI all,
I found the BAPI for the second part of my requirement i.e Updating the status of Project.
BAPI BAPI_BUS2002_SET_STATUS will update the user/system status of Project/Network
But a sequence had to followed to use this BAPI. The below is sequence,
BAPI_PS_INITIALIZATION
BAPI_BUS2002_SET_STATUS
BAPI_PS_PRECOMMIT
BAPI_TRANSACTION_COMMIT
How ever my first part of the requirement is still open. i.e BAPI for Copying the project from version to another.
BAPI which behaves similar to CJ9FS as i also need the list of objects(Displayed in CJ9FS after copying).
BR/Balaji

Power consumption for router and switch

I have a linksys EZSX88W switch which I checked power consumption of 70ma idle. It's supplied by the adapter which has an output of 1000ma. Not sure what the consumption when switch is being used. I also have an WRT54GS but haven't checked consumption yet, but it's powered by the same 1000ma adapter. In an effort to save energy-that -GREEN FEELING- I was thinking of using on power adapter to power bothe the router and switch. Has anyone tried this yet?? Also if I posted this in the wrong area I hope the moderator will move the post.
thanks

So you are thinking of Powering on both the Devices using a single Power Adapter? Well never tried to make both the devices use a single power adapter. As far as i think its not possible. But if you still wish, you can give a try and check if that works for you or not.

BAPI for Routing and recipe??

Similar Messages

Maybe you are looking for