BAPI for stock in transit for each plant

Hi,
i am looking a for a bapi which will return stock in transit for that plant.
Regards,
Mukund

Hi,
Try FM
CHECK_S078
CHECK_S084
Hope it helps..
Lokesh
Pls. reward appropriate points
Message was edited by: Lokesh Aggarwal

Similar Messages

ATP for 'Stock in transit' for 3rd Party scenario

We have a scenario:
For warehouse replenishments an STO is created and then a delivery is subsequently created for the STO. Once the delivery has been shipped out of the manufacturing facility (post goods issued) the materials on the delivery are transferred from unrestricted-stock at the manufacturing facility to stock-in-transit at the receiving warehouse. Once the stock is in transit to the third-party warehouses, ATP should then take it into consideration when deliveries are created from the third-party warehouses to customers.
Now how to take the ATP check for 3rd party del. into consideration for STO?
STO document type is UD
Goods issue movement type is 641
Goods receipt movement type is 101

Some useful info here..
http://help.sap.com/saphelp_47x200/helpdata/en/2b/b22d3b1daca008e10000000a114084/frameset.htm

Stock in transit for Stock transfer report

HI
Do we have any standard reports for Stock in Transit for Stock transfers (like what we have MB5T for STO) ?
When we do a transfer using 303 mvt type we see stock in transit in MARC-UMLMC do we have any other standard report which can provide a document number and the stock in transit qty
Thanks
K

Hi,
You can see through MBSU.
& MB51 is Report.
SAM
Edited by: Saminathan Gopalan on Jul 2, 2010 9:33 AM

Stock in transit for Block stock

Kindly suggest on scenario below here with.
As like stock in transit can be seen through Mov. type 313,303 for un resticted stock. Can we see the stock in transit for Block stock. If so how.?
Thanks & Regards
Sudhansu

Hi,
In the two-step process, Inventory Management function isonly used.
Issuing plant
MB1B --> Movement type - 303
              Issuing plant & Storage location ---> Enter the receiving plant and storage location and quantity.
Receiving plat
MB1B --> movement tyoe- 305
         Enter the receiving plant and storage location. The material and quantity received.
The above process can be replicated using the TCode MIGO
Step 1 : Remove from Storage -- Other --Movement Type 303 Enter the From and Destination plant in the Transfer posting tab.
Step 2: Place in Storage -- Other/ Material Document (generated at the time of issue) movement tyoe- 305
            Enter the material and quantity received.
          Placement in Storage is only made in the unrestricted stock.
Possible reasons for carrying out the a stock transfer in two steps are:
a) The plants are located at quite a distance from each other and the goods are in transit for a prolonged period of time;
b) there is one employee responsible at each plant, and each can only post movements for his/her own plant.
hope you understand.
regards,
bijoy kumar

Movement types for Stock in transit

Hi,
I want to know how to find out stock in transit for a particular plant using movement types.

Hi,
TCode to see stock in Transit MB5T
Movement Types 351 & 641
regards,

What movement to use for stock in transit w/o STO reference

Hi,
Is there a movement for carrying out stock in transit to receiving plant w/o reference to STO.
The STO process is not wanted.
User does the movement to complete the transaction
Thanks

I found it.
Use movement 303/305

Report for stock in transit datewise

I need stock in transit datewise. Is there any report possible for that ? Which table and fields should I refer. please revert.
Regs,
Appie

Hi,
T.Code: MB5T can be used for Report for stock in transit, but date wise u can't get here. U have to develop areport or by querry u can develop a report.
U can get date (MKPF-BUDAT) wise details by giving movement type in MSEG table u get all the details in the tables.
Regards,
Chinna

Stock in transit for a particular date

Hi all,
How to find the stock in transit for a particular date.
In MB5T date option is not available.
Is there any other way or i need to gofor Z development.
Kindly help me in this regard.
Regards
KK

Try MB5TD. Please also check OSS notes 1120843, 1268193, 925384.
Edited by: Csaba Szommer on May 22, 2009 8:28 AM

Delivery without reference for stock transfer within the same plant 311

Dear all,
I need to create a delivery without reference for stock transfer within the same plant, movement 311, i.e. just from 1 storage location to another storage location.
I tried to use VL01NO with delivery type UL.
Now my question is how can I assign a receiving plant for a customer?
I can't do the MIGO or MB1B document because I need the delivery document (packing list, forms, Texts,...).
It's possible this option???
Thank you very much.

Hi,
What is the item category you are assigning while doing VL01NO? Check the schedule line category for that item category assignment. That Schedule line category has an option for one step GI. There you can assign 311 or create a separate item category and schedule line category and in that SC assign 311.
Thanks
Krish.

STO. How to create the stock in transit if the plant has been block.

Problem with STO. How to clear the stock in transit if the plant has been block.

The command builder takes a Select SQL and automatically creates a Insert, Update, and Delete SQL commands. The database could have Insert priviledge and not Updates and Delete priviledges. But I don't think this is causing the problem. I suspect
the Orcacle Client handled an exception that wasn't returned to you code and the client is in an invalid state. You may need call a new constructor for the client. I would check the Control Panel : Adminsitrative Tools : Event Viewer to see if
there were any error messages created when you ran the application.
jdweng

How to make an account assignment for stock in transit inside obyc

hi experts,
i am sure i dont know as to what transaction type shoudl i use to allow postings to stock in transit account. please help me with step by step processes involved in it.
best regards
sayeed

It is not possible to define default Acct Assgmt cat for particular plants in STO. Instead you can make it default at client level (irrespective of doc type) for particular users.
For doing so you need to just maintain user parameter KNT with value equal to your Acct Assigmt cat. You can maintain user parameter in SU01/SU3. This means whenever this particular user run the transaction which includes act. assigmt cat will have default act assigmt cat.
Hope it might help you somewhat.
Cheers,
Parag Mahajan

Valuation of stock in transit for a given period

How can I find the valuation type for the stock in transit at a given period?
I have 6000 units in transit to plant 2222 and I want to find out its valuation. I believe I either need to know the plant of origin and batch or the destination plant and batch, but I do not know how to get this information.
Thank you

Hi,
Check MB5T transaction to find out the total stock in transit.
In order to find out the same period wise, check MB51 Report using the mov.types 641 & 101. By reconciling the same you can findout which are all pending.
Thanks & Regards,

Function module For Stock In transit

Hi All,
Withing a report development, i should have to include Stock In transit invoice numbers for selected plant and date.
Is their have a function module,which cab be use to get Stock In transit invoice numbers.(same to MSCI output)
Regards
Praveen

Hi
try the below function module:
MB_ADD_TRANSFER_QUANTITY ********
Hope it helps...

How to implement issuing stock in-transit for stock transport orders

Hello,
We are using stock transport orders in SAP. At the moment the supplying plant does a post goods issue for the delivery, the stock in-transit is "owned" by the receiving plant. Our Finance department wants this to be changed in such a way that the stock will be owned by the issuing plant until it has been received by the reciving plant.
It seems there is a possibility to do that, but I can not figure out what exactly needs to be done. Can someone explain to me the steps that need to be taken to implement this?
Thanks,
Ed

Try MB5TD. Please also check OSS notes 1120843, 1268193, 925384.
Edited by: Csaba Szommer on May 22, 2009 8:28 AM

Excise invoice for Stock Transfer from Mfg. Plant to excisable Depot

Hi Experts,
Which tcode (j1iin or j1is) should be used for creating excise invoice in mfg. plant for transfer the goods to exciseable depot and why.
And if we procure the material in mfg. plant and transferring the procured material to excisable depot then how can we map or assign incoming excise invoice to outgoing excise invoice so that same duty can be transferred.
Thanks in advance and points on satisfying answers.
Kuldeep Dahiya
Edited by: Kuldeep Dahiya on Jul 4, 2008 4:41 PM

Hi There
we will be using J1IIN for the transfer for the simple reason that you cannot move the goods from the manuefacturing plant without paying the excise duty.
regarding your second query I am unable to understand your exact requirement but as per my understanding you will do the good receipt and CENVAT will be credited and outgoing or stock transfer will happen as the regular process afterwards by debiting the excise duty from the CENVAT account
Hope this will help
Manu Seth

BAPI for stock in transit for each plant

Similar Messages

Maybe you are looking for