BAPI for table CRMM_BUT_FRG0081
Hello
Anybody knows bapi to create record in table CRMM_BUT_FRG0081?
Regards
Radek
Hi,
You can also use FM's:
CRMH_BUPR_DI_FRG0081 and BUS_CONTROL_MAIN_DI in sequence.
Example:
CALL FUNCTION 'CRMH_BUPR_DI_FRG0081'
TABLES
it_frg0081_di = it_frg0081_di "Input data after validating
et_data = ct_data. "Output
CALL FUNCTION 'BUS_CONTROL_MAIN_DI'
EXPORTING
i_objap = gc_objap_bupr "Value - BUPR
i_xupdtask = gc_x
i_xcommit = space
i_xbapi = gc_x
i_xtest = iv_testrun
TABLES
t_data = ct_data "Input - received from
"previous step
t_message = lt_message.
This method is Direct Input method, so the incoming data should be validated cautiously.
regards,
arul jothi a.
Similar Messages
-
Hello Friends,
I have a problem where I have to update some entries in the table DFKKCOLL. Does anybody know if there's a BAPI for updating this table? It's regarding Closing dunning cases....
any input would be appreciated..
best regards BaljinderHi,
Try to use Function module FKK_DB_DFKKCOLL_SELECT.
ISU_DUNNING_DEACT_INSTPL_0350 & ISU_DUNNING_PRINT_REMIND_0350
Regards -
BAPI for changing delivery date and delivery time fields in LIKP table
Hi All,
Is there any BAPI or function module to change the delivery date and delivery time in LIKP table ?
Please tell me experts if exists.
Thank you,
Raghu.try these:
BAPI/FM to update LIKP and VTTK tables
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bapi-for-changing-sales-headertable-likp-662800 -
BAPI FOR Deleting a Schedule Line Item from EKES and EKET tables
Dear All,
I would like to for deleting one of the line item from EKES (Po Confirmation ) and the respective line item from the EKET(PO Schedule Line Item Table).
Assume that am allowing the user to select the lineitem from zprogram screen and collecting the PO and Its LIne Item details in an internal table.
Can i Use
<b>BAPI_PO_Change</b> , if so , can anybody tell me the steps to follow to use this bapi for deleting the PO lineItems, since i m going to try BAPI for First time.
pls help me out
Message was edited by: Raja K.PHi raja ,
loop at iekko1.
w_index = sy-tabix.
item-po_item = itemx-po_item = iekko1-ebelp.
item-quantity = iekko1-mng01.
itemx-quantity = iekko1-mng01.
if iekko1-wamng = iekko1-wemng.
itemx-no_more_gr = item-no_more_gr = 'X'.
else.
itemx-no_more_gr = item-no_more_gr = ''.
endif.
append item.
append itemx.
clear return[].
call function 'BAPI_PO_CHANGE'
exporting
purchaseorder = iekko1-ebeln
tables
return = return
poitem = item
poitemx = itemx.
if return[] is initial.
commit work and wait.
call function 'DEQUEUE_ALL'.
search for deletion fields which u have to mark 'X'.
before calling this BAPi u have to lock the PO by using ENQUEUE.
<b>
FU BAPI_PO_CHANGE
Text
Change purchase order
Functionality
Function module BAPI_PO_CHANGE enables you to change purchase orders. The Change method uses the technology behind the online transaction ME22N.
Alternatively, the IDoc type PORDCH1 is available. The data from this IDoc populates the interface parameters of the function module BAPI_PO_CHANGE.
Functionality in Detail
Authorization
When you create (activity 02) an Enjoy purchase order, the following authorization objects are checked:
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
Controlling adoption of field values via X bar
For most tables, you can use your own parameters in the associated X bar (e.g. PoItemX) to determine whether fields are to be set initial, values inserted via the interface, or default values adopted from Customizing or master records, etc. (for example, it is not mandatory to adopt the material group from an underlying requisition - you can change it with the BAPI).
Transfer
Purchase order number
The PurchaseOrder field uniquely identifies a purchase order. This field must be populated in order to carry out the Change method.
Header data
The header data of the Enjoy purchase order is transferred in table PoHeader.
Item data
The item data of the Enjoy purchase order is stored in the tables PoItem (general item data). Changes regarding quantity and delivery date are to be made in the table PoSchedule.
Use the table PoAccount to change the account assignment information.
Services and limits
Changes to existing items cannot be carried out with the Change method. It is only possible to create new items.
Conditions
Conditions are transferred in the table PoCond; header conditions in the table PoCondHeader. A new price determination process can be initiated via the parameter CALCTYPE in the table PoItem.
Vendor and delivery address
The vendor address in the table PoAddrVendor and the delivery address in the table PoAddrDelivery can only be replaced by another address number that already exists in the system (table ADRC). Changes to address details can only be made using the method BAPI_ADDRESSORG_CHANGE.
Partner roles
You can change all partners except the partner role "vendor" via the table PoPartner.
Export/import data
Export/import data can be specified per item in the table PoExpImpItem. Foreign trade data can only be transferred as default data for new items. Changes to the export/import data of existing items are not possible.
Texts
Header and item texts can be transferred in the tables PoTextHeader and PoTextItem. Texts for services are imported in the table PoServicesText. Texts can only be replaced completely.
Version Management
You can make use of the Version Management facility via the table AllVersions.
Return
If the PO was changed successfully, the header and item tables are populated with the information from the PO.
Return messages
Messages are returned in the parameter Return. This also contains information as to whether interface data has been wrongly or probably wrongly (heuristical interface check) populated. If a PO has been successfully created, the PO number is also placed in the return table with the appropriate message.
Restrictions
With this function module, it is not possible to:
Create subcontracting components (you can only use existing ones)
Create configurations (you can only use existing ones)
Change message records (table NAST) and additional message data (this data can only be determined via the message determination facility (Customizing))
Attach documents to the purchase order
Change foreign trade data
Change service data
Change or reexplode BOMs
A firewall prevents the manipulation of data that is not changeable in Purchasing according to the business logic of the purchase order (e.g. PO number, vendor, etc.).
PO items with an invoicing plan cannot be created or changed using the BAPIs
In this connection, please refer to current information in Note 197958.
To change addresses with numbers from Business Address Services (cantral address management), please use the function module BAPI_ADDRESSORG_CHANGE.
To change variant configurations, please use the function module BAPI_UI_CHANGE. More information is available in the BAPI Explorer under the Logistics General node.
In the case of changes that are to be made via the BAPI_PO_CHANGE, a firewall first checks whether the relevant fields are changeable. This approach follows that of the online transaction. Here it is not possible to change the vendor or the document type, for example.
Example
Example of changes made to a purchase order with:
1. Change in header data
2. Change in item
3. Change in delivery schedule
4. Change in account assignment
5. Change in conditions
6. Change in partners
Parameter: PURCHASEORDER 4500049596
Parameter: POHEADER
PMNTTRMS = 0002
PUR_GROUP = 002
Parameter: POHEADERX
PMNTTRMS = X
PUR_GROUP = X
Parameter: POITEM
PO_ITEM = 00001
CONF_CTRL = 0001
Parameter: POITEMX
PO_ITEM = 00001
PO_ITEMX = X
CONF_CTRL = X
Parameter: POSCHEDULE
PO_ITEM = 00001
SCHED_LINE = 0001
QUANTITY = 10.000
PO_ITEM = 00001
SCHED_LINE = 0003
DELETE_IND = X
Parameter: POSCHEDULEX
PO_ITEM = 00001
SCHED_LINE = 0001
PO_ITEMX = X
SCHED_LINEX = X
QUANTITY = X
PO_ITEM = 00001
SCHED_LINE = 0003
PO_ITEMX = X
SCHED_LINEX = X
DELETE_IND = X
Parameter: POACCOUNT
PO_ITEM = 00001
SERIAL_NO = 01
GL_ACCOUNT = 0000400020
Parameter: POACCOUNTX
PO_ITEM = 00001
SERIAL_NO = 01
PO_ITEMX = X
SERIAL_NOX = X
GL_ACCOUNT = X
Parameter: POCOND
ITM_NUMBER = 000001
COND_TYPE = RA02
COND_VALUE = 2.110000000
CURRENCY = %
CHANGE_ID = U
Parameter: POCONDX
ITM_NUMBER = 000001
COND_ST_NO = 001
ITM_NUMBERX = X
COND_ST_NOX = X
COND_TYPE = X
COND_VALUE = X
CURRENCY = X
CHANGE_ID = X
Parameter: POPARTNER
PARTNERDESC = GS
LANGU = EN
BUSPARTNO = 0000001000
Help in the Case of Problems
1. Note 197958 lists answers to frequently asked questions (FAQs). (Note 499626 contains answers to FAQs relating to External Services Management.)
2. If you have detected an error in the function of a BAPI, kindly create a reproducible example in the test data directory in the Function Builder (transaction code SE37). Note 375886 tells you how to do this.
3. If the problem persists, please create a Customer Problem Message for the componente MM-PUR-PO-BAPI, and document the reproducible example where necessary.
Customer Enhancements
The following user exits (function modules) are available for the BAPI BAPI_PO_CREATE1:
EXIT_SAPL2012_001 (at start of BAPI)
EXIT_SAPL2012_003 (at end of BAPI)
The following user exits (function modules) are available for the BAPI BAPI BAPI_PO_CHANGE:
EXIT_SAPL2012_002 (at start of BAPI)
EXIT_SAPL2012_004 (at end of BAPI)
These exits belong to the enhancement SAPL2012 (see also transaction codes SMOD and CMOD).
There is also the option of populating customer-specific fields for header, item, or account assignment data via the parameter EXTENSIONIN.
Further Information
1. Note 197958 contains up-to-date information on the purchase order BAPIs.
2. If you test the BAPIs BAPI_PO_CREATE1 or BAPI_PO_CHANGE in the Function Builder (transaction code SE37), no database updates will be carried out. If you need this function, please take a look at Note 420646.
3. The BAPI BAPI_PO_GETDETAIL serves to read the details of a purchase order. The BAPI cannot read all details (e.g. conditions). However, you can use the BAPI BAPI_PO_CHANGE for this purpose if only the document number is populated and the initiator has change authorizations for purchase orders.
4. Frequently used BAPIs for purchase orders are BAPI_PO_CREATE, BAPI_PO_CREATE1, BAPI_PO_CHANGE, BAPI_PO_GETDETAIL, BAPI_PO_GETITEMS, BAPI_PO_GETITEMSREL, and BAPI_PO_GETRELINFO.
5. For more information on purchase orders, refer to the SAP library (under MM Purchasing -> Purchase Orders) or the Help for the Enjoy Purchase Order, or choose the path Tools -> ABAP Workbench -> Overview -> BAPI Explorer from the SAP menu.
Parameters
PURCHASEORDER
POHEADER
POHEADERX
POADDRVENDOR
TESTRUN
MEMORY_UNCOMPLETE
MEMORY_COMPLETE
POEXPIMPHEADER
POEXPIMPHEADERX
VERSIONS
NO_MESSAGING
NO_MESSAGE_REQ
NO_AUTHORITY
NO_PRICE_FROM_PO
EXPHEADER
EXPPOEXPIMPHEADER
RETURN
POITEM
POITEMX
POADDRDELIVERY
POSCHEDULE
POSCHEDULEX
POACCOUNT
POACCOUNTPROFITSEGMENT
POACCOUNTX
POCONDHEADER
POCONDHEADERX
POCOND
POCONDX
POLIMITS
POCONTRACTLIMITS
POSERVICES
POSRVACCESSVALUES
POSERVICESTEXT
EXTENSIONIN
EXTENSIONOUT
POEXPIMPITEM
POEXPIMPITEMX
POTEXTHEADER
POTEXTITEM
ALLVERSIONS
POPARTNER
Exceptions
Function Group
2012
</b>
regards
prabhu
Message was edited by: Prabhu Peram -
BAPI for Purchase Order Confirmation and update EKES table
Hi all,
I have a requirement to update the PO confirmation soon after successful creation of PO in an IDOC.
I have used BAPI_PO_CHANGE function module which didnt serve the purpose as it cannot update confirmations.
I tried using ME_CONFIRMATION_UPDATE where I was able to add a confirmation entry in EKES table but that is not being reflected in ME23N transaction when I display the PO.
Please help me out on this.
Thanks & Regards
PavanNB: Never use a standard update FM (check attributes of ME_CONFIRMATION_UPDATE) its often only a SQL statement collector without any check, logging of changes or database consistency, if you perform a where-used you should find it is never called alone but with a bunch of other update FM after checks and other update preparation.
Get back to the BAPI and table parameter POCONFIRMATION, also use BAPI_PO_GETDETAIL1 to get current data for the call of BAPI_PO_CHANGE.
Regards,
Raymond
PS: If it is not in 197958 - BAPIs for purchase orders: Missing functions, you should be able to do it -
Need a bapi or table for GL Report
Hi experts,
I need a bapi or table for generating report period balance for GL accounts. i found one bapi BAPI_GL_GETGLACCPERIODBALANCES which is closer to my requirement. But i want to get the balances for cost center and particular material. As Cost center and product ranges are in my selection fields.
Can anyone tell me table or BAPI?SAP standard infoset query provides a report STDCOST for this.
May be this will suit your requirement. It will give material wise costing.
hope this helps.
reward if helpful. -
BAPI for creating variant table
Hi,
Cu61 and Cu60 are two transactions in SAP (comes under Variant Configuration) to create a variant table and fill its contents respectively.
Now, I am trying to create a transaction in SAP such that on the screen it takes the name of the variant table to be created and an excel file as input from the user and thus create a variant table and fill its contents in the background. Now, ofcourse I have to do this through ABAP coding. I know how to upload the excel file into the internal table but I am not able to figure out that how should i create the variant table and transfer the contents of that internal table to the variant table? That is, how should i transfer the contents to the variant table?
I have been able to find out the tables involved in the process viz, CUVTAB, CUVTAB_FLD, CUVTAB_VALC.
Does there exist any BAPI for doing the same?
Please Help.Hi Reema,
Thanks for replying but this is not what I am looking for. I do not want to create a cluster table rather I want to create a variant table (it is a table used in variant configuration to store the combinations of a material whose characteristics can take varying values at the time of configuration). A table that we create through the transaction Cu61 and populate its contents through the transaction Cu60.
However, I still tried your suggestion but it did not result in what I want.
My problem still exists. -
Hey SAP Experts,
Is there any BAPI for the purchase data in KONV table?
Could anyone provide this?
Ample points will be rewarded.Hello Prathibha,
Take a look at function module KONV_UPDATE to see if it can help you.
Depending on the value that you indicate in PI_UPDKZ, it allows you to make INSERT's, MODIFY's and DELETE's on table KONV. The values you can indicate on table parameter PI_T_KONV.
Kind regards,
Bruno -
Need standard BAPI and Table for PO order
Hi all,
is there any standard bapi for vendors last purchase order (based on document type).
thanks in advance.
Edited by: Dhanush on Oct 21, 2008 1:25 AMok i cleared.i prepare report like this..
types : begin of ty_ekko,
ebeln type ekko-ebeln,
lifnr type ekko-lifnr,
bedat type ekko-bedat,
bsart type ekko-bsart,
*ernam TYPE ekko-ernam,
*pincr TYPE ekko-pincr,
*lponr TYPE ekko-lponr,
end of ty_ekko.
TYPES :BEGIN OF ty_ekpo,
ebeln TYPE ekpo-ebeln,
matnr TYPE ekpo-matnr,
ebelp TYPE ekpo-ebelp,
werks TYPE ekpo-werks,
END OF ty_ekpo.
data: maxdt TYPE ekko-ebeln.
data : it_ekko type table of ty_ekko,
it_ekpo TYPE TABLE OF ty_ekpo,
wa_ekko type ty_ekko,
wa_ekpo type ty_ekpo.
parameters : lifnr like ekko-lifnr .
SELECT MAX( ebeln ) INTO maxdt FROM ekko WHERE lifnr = lifnr .
*select ebeln lifnr bedat bsart into table it_ekko from ekko where lifnr = lifnr AND bsart = bsart.
*select matnr ebelp werks into wa_ekko1 from ekpo where matnr = matnr AND bsart = bsart.
select ebeln lifnr bedat bsart into wa_ekko from ekko WHERE lifnr = lifnr AND ebeln = maxdt.
ENDSELECT.
select ebeln matnr ebelp werks from ekpo into TABLE it_ekpo where ebeln = wa_ekko-ebeln. .
write: / 'Vendor', 10 'Purchasing Doc' , 30 'Document type', 45 'Documentdate' , 65 'Material', 79 'Item number', 94 'plant'.
ULINE.
loop at it_ekpo into wa_ekpo.
write : / wa_ekko-lifnr,
10 wa_ekko-ebeln,
30 wa_ekko-bsart,
45 wa_ekko-bedat,
65 wa_ekpo-matnr,
79 wa_ekpo-ebelp,
94 wa_ekpo-werks.
endloop.
Edited by: Dhanush on Oct 22, 2008 3:23 AM -
BAPI for COSS and COSP Table to Create and Update
Hi,
Is there a BAPI for COSS and COSP for creating and/or updating these tables?
Thankshi ,
u dont have any bapis for updatign specific tables
bapis are generally used for updating a transaction i mean number of tables
where is the use of the tables u can search bapis in transaction bapi
and where are the tables used i guess in fi/co so u can search under them
regards
afzal -
Easy Question:Select many rows from a table and execute BAPI for these rows
Hi Experts,
I have created one WD project. The WD project fetches some records of backend using BAPI and displays in a table. I have to select some rows from the table and then execute BAPI for selected rows.
How I can select multiple records from the table and then execute another BAPI for selected rows.
Regards,
GaryHi,
In the Node which you binded to the table create one more attribute of type boolean.
For example your node is as below:
//Table Node
TableNode
> Att1
> Att2
> isSelected(boolean) - Newly created attribute for this requirement.
//Result Node contains the elements selected in TableNode
ResultNode
>Att1
>Att2
Now in the table create one more Column with Checkbox as tablecell editor. Now bind this boolean attribute to that check box.
Now in the code you can get the selected rows by user as below:
for(int i=0;i<TableNode().size();i++)
if(wdContext.nodeTableNode().getTableNodeElementAt(i).getIsSelected()==true)
IPrivateTestView.IResultNode element=wdContext.createResultNodeElement();
element.setAtt1(wdContext.nodeTableNode().getTableNodeElementAt(i).getAtt1());
element.setAtt2(wdContext.nodeTableNode().getTableNodeElementAt(i).getAtt2());
wdContext.nodeResultNode().addElement(element);
Regards,
Charan -
BAPI for displaying and updating table KOTG001?
Please suggest what BAPIs to use.
Henninghi ,
u dont have any bapis for updatign specific tables
bapis are generally used for updating a transaction i mean number of tables
where is the use of the tables u can search bapis in transaction bapi
and where are the tables used i guess in fi/co so u can search under them
regards
afzal -
Alter a BAPI Result Table, how to get into the display "loop" ?
Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank -
Hi!
Can anyone let me know where to find the bapi for open po and how to use it in my report program.
Thanks in advance.
Note: Mr Anji Reddy vangala has answered me for which iam very much thankful to him, but i need to know about the concerned bapi.
Regards,
Parwez.Hi,
Refer the sample code below which creats PO using BAPI_PO_CREATE1.
Hope this helps your querry.
*& Report YDM_PO_CREATE *
REPORT ydm_po_create.
*-- Input File Declaration
TYPES: BEGIN OF ty_input_file,
column1 TYPE char50,
column2 TYPE char50,
column3 TYPE char50,
column4 TYPE char50,
column5 TYPE char50,
column6 TYPE char50,
column7 TYPE char50,
column8 TYPE char50,
column9 TYPE char50,
column10 TYPE char50,
column11 TYPE char50,
column12 TYPE char50,
column13 TYPE char50,
column14 TYPE char50,
column15 TYPE char50,
column16 TYPE char50,
column17 TYPE char50,
column18 TYPE char50,
END OF ty_input_file.
DATA: i_input_file TYPE STANDARD TABLE OF ty_input_file,
wa_input_file TYPE ty_input_file.
CONSTANTS: c_path TYPE char20 VALUE 'C:\',
c_mask TYPE char9 VALUE ',*.*,*.*.',
c_mode TYPE char1 VALUE 'O',
c_filetype TYPE char10 VALUE 'ASC',
c_x TYPE char01 VALUE 'X'.
PARAMETERS : p_fname LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
*-- Browse Presentation Server
PERFORM f4_presentation_file.
START-OF-SELECTION..
*-- Read presentation server file
PERFORM f1003_upload_file.
IF NOT i_input_file[] IS INITIAL.
PERFORM split_data.
ENDIF.
*& Form f4_presentation_file
*& F4 Help for presentation server
FORM f4_presentation_file .
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = c_path
mask = c_mask
mode = c_mode
title = text-001
IMPORTING
filename = p_fname
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_presentation_file
*& Form f1003_upload_file
*& Upload File
FORM f1003_upload_file .
DATA: lcl_filename TYPE string.
lcl_filename = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lcl_filename
filetype = c_filetype
has_field_separator = c_x
TABLES
data_tab = i_input_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
ENDFORM. " f1003_upload_file
*& Form split_data
Collect data for creating Purchase Order
FORM split_data .
DATA: i_poitem TYPE STANDARD TABLE OF bapimepoitem,
i_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
i_poitem_sch TYPE STANDARD TABLE OF bapimeposchedule,
i_poitem_schx TYPE STANDARD TABLE OF bapimeposchedulx,
i_acct_*** TYPE STANDARD TABLE OF bapimepoaccount,
i_acct_assx TYPE STANDARD TABLE OF bapimepoaccountx,
i_services TYPE STANDARD TABLE OF bapiesllc ,
i_srvacc TYPE STANDARD TABLE OF bapiesklc,
i_return TYPE STANDARD TABLE OF bapiret2,
wa_header TYPE bapimepoheader,
wa_headerx TYPE bapimepoheaderx,
wa_poitem TYPE bapimepoitem,
wa_poitemx TYPE bapimepoitemx,
wa_poitem_sch TYPE bapimeposchedule,
wa_poitem_schx TYPE bapimeposchedulx,
wa_acct_*** TYPE bapimepoaccount,
wa_acct_assx TYPE bapimepoaccountx,
wa_services TYPE bapiesllc,
wa_srvacc TYPE bapiesklc,
wa_return TYPE bapiret2,
ws_po TYPE bapimepoheader-po_number.
break gbpra8.
wa_services-pckg_no = 10.
wa_services-line_no = 1.
wa_services-outl_no = '0'.
wa_services-outl_ind = c_x.
wa_services-subpckg_no = 20.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 10.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 01.
wa_srvacc-serial_no = 01.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
LOOP AT i_input_file INTO wa_input_file.
IF wa_input_file-column2 EQ 'HD'.
wa_header-doc_type = wa_input_file-column3.
wa_header-creat_date = sy-datum.
wa_header-created_by = sy-uname.
wa_header-vendor = wa_input_file-column4.
PERFORM conversion_output USING wa_header-vendor
CHANGING wa_header-vendor.
wa_header-comp_code = 'DE03'.
wa_header-purch_org = 'DE03'.
wa_header-pur_group = 'DE1'.
wa_header-vper_start = wa_input_file-column9.
wa_header-vper_end = wa_input_file-column10.
wa_headerx-comp_code = c_x.
wa_headerx-doc_type = c_x.
wa_headerx-creat_date = c_x.
wa_headerx-created_by = c_x.
wa_headerx-vendor = c_x.
wa_headerx-purch_org = c_x.
wa_headerx-pur_group = c_x.
wa_headerx-vper_start = c_x.
wa_headerx-vper_end = c_x.
ENDIF.
IF wa_input_file-column2 EQ 'IT'.
wa_poitem-po_item = wa_input_file-column3.
wa_poitem-short_text = wa_input_file-column6.
wa_poitem-plant = wa_input_file-column8.
wa_poitem-quantity = '1'.
wa_poitem-tax_code = 'V0'.
wa_poitem-item_cat = 'D'.
wa_poitem-acctasscat = 'K'.
wa_poitem-matl_group = wa_input_file-column7.
wa_poitem-pckg_no = '10'.
APPEND wa_poitem TO i_poitem .
wa_poitemx-po_item = wa_input_file-column3.
wa_poitemx-po_itemx = c_x.
wa_poitemx-short_text = c_x.
wa_poitemx-plant = c_x.
wa_poitemx-quantity = c_x.
wa_poitemx-tax_code = c_x.
wa_poitemx-item_cat = c_x.
wa_poitemx-acctasscat = c_x.
wa_poitemx-matl_group = c_x.
wa_poitemx-pckg_no = c_x.
APPEND wa_poitemx TO i_poitemx.
wa_poitem_sch-po_item = wa_input_file-column3.
wa_poitem_sch-delivery_date = sy-datum.
APPEND wa_poitem_sch TO i_poitem_sch.
wa_poitem_schx-po_item = wa_input_file-column3.
wa_poitem_schx-po_itemx = c_x.
wa_poitem_schx-delivery_date = c_x.
APPEND wa_poitem_schx TO i_poitem_schx.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 01.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 02.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 01.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 02.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_services-pckg_no = 20.
wa_services-line_no = 2.
wa_services-service = wa_input_file-column9.
wa_services-quantity = '100'.
wa_services-gr_price = '100'.
wa_services-userf1_txt = wa_input_file-column13.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 20.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 02.
wa_srvacc-serial_no = 02.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_header
poheaderx = wa_headerx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
NO_AUTHORITY =
NO_PRICE_FROM_PO =
IMPORTING
exppurchaseorder = ws_po
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
return = i_return
poitem = i_poitem
poitemx = i_poitemx
POADDRDELIVERY =
poschedule = i_poitem_sch
poschedulex = i_poitem_schx
poaccount = i_acct_***
POACCOUNTPROFITSEGMENT =
poaccountx = i_acct_assx
POCONDHEADER =
POCONDHEADERX =
POCOND =
POCONDX =
POLIMITS =
POCONTRACTLIMITS =
poservices = i_services
posrvaccessvalues = i_srvacc
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
break gbpra8.
LOOP AT i_return INTO wa_return.
ENDLOOP.
ENDFORM. " split_data
*& Form conversion_output
Conversion exit input
FORM conversion_output USING p_ip
CHANGING p_op.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_ip
IMPORTING
output = p_op.
ENDFORM. " conversion_output
<b>Reward points if this helps.
Manish</b> -
PS: BAPI For Planned Progress and Actual Progress
Dear All,
Is there any BAPI available for Planned Progress and Actual Progress for PS Project.
Regards,
SohailHi,
Try using this report s_alr_87013532.
Also for planned and actual progress the table is rpsqt. Could not find any bapi for the progress
Regards
Hiren K.Chitalia
Maybe you are looking for
-
I need a query to get all the values of taxes from the year 2008
I have 2 tables in oracle 10.2.0.1 sm_coaster_bills( id_coaster_bills number, (pk) id_coaster number, (fk from table sm_coasters) period varchar2(6), (JANMAR or APRJUN or JULSEP or OCTDEC (months of trimenster)) year varchar2(4), (year when the bill
-
MPD: ERROR: problems opening audio device
Since a day, maybe a little more, mpd is troubling me. When I use mpc, I get the error ERROR: problems opening audio device This is my mpd.conf # An example configuration file for MPD # See the mpd.conf man page for a more detailed description of eac
-
Followed the wiki and started daemon, used the fuser commands to check that nothing was using sound first and restarted daemon after closing all apps but no sound. Here is my /etc/asound.conf: # Use Pulseaudio by default pcm.pulse { type pulse ctl.pu
-
Premiere Pro CS6 effects problem
Guys, I installed Premiere Pro CS6 with creative cloud , but all my effects are gone. In the effect bin there is not a single effect. How can i get them??? I have a new Macbook pro... Regards Martin
-
I have a user account which I believe is corrupt. Is there a way of recreating this account so I do not lose any existing mail? The mail is served from an XServe and is IMAPed.