BAPI for transaction F-30

Hi All,
Is there a BAPI that I can use for transaction F-30?
Thanks,
Jim

I am not sure which BAPI would work, but the FM POSTING_INTERFACE_CLEARING should do the trick since it simulates FB05, which is really the same as F-30.
The input parameter is very much the same as FM 'POSTING_INTERFACE_DOCUMENT', which you could find much information on in SDN, and also the FM has good documentation in SAP.
Goodluck

Similar Messages

BAPI for transaction F-44

Does anybody know if there is a BAPI for transaction F-44 ?

hi,
look here
Re: BAPI for transaction F-03
A.

BAPI for Transaction ME51N?

How to devlop Purchase Requisition BAPI for Transaction ME51N?

Hi vamshi,
We have BAPI
BAPI_REQUISITION_CREATE
BAPI_PR_CREATE
BAPI_REQUISITION_CHANGE
BAPI_PR_CHANGE
Please check this link
FOR CREATING:
http://www.erpgenie.com/abap/bapi/example.htm
http://www.****************/Tutorials/BAPI/CustomBAPICreation2/page1.htm
Best regards,
raam

BAPI for transaction F-03

Does anybody know if there is a BAPI for transaction F-03 ?

hi,
use report rfbobl00 for trx FB05
Re: BAPI for F-30
A.
Message was edited by: Andreas Mann

BAPI for Transaction VA01?

How to Develope an interface program to upload the sales order data from legacy system to SAP using BAPI for Transaction VA01.Explain me clearly?

VA01:
BAPI_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
steps for bapi creation
STEP 1 - Define a structures for the BAPI
In this step a structures for the parameters and tables of the function module used for the BAPI are defined.
Use Data type -> Structure
Define the following structures:
ZBAPI_ORDER_STATUS_IMPORT which contains the following fields:
ORDERID Order number (Keyfield)
SPRAS Language
ExcludeInactive - Checkbox - Exclude inactive status
ZBAPISTAT:
STEP 2 - Write Function Module
Important notes:
Each BAPI must have its own function group.
Under the attributes tab remember to select Processing Type Remote Enabled module, otherwise the function module cannot be invoked via RFC and used as a BAPI
Import/Export parameters can only be BY VALUE for an RFC enabled function module
We are only creating one BAPI in this example, but you can create related BAPIs in the same function pool, so they will be able to share global data.
Code
Notes:
The subroutine SET_RETURN_MESSAGE is a standard routine used for BAPIs that use the BAPIRETURN structure
In form Z_BAPI_GET_ORDER_SYSTEM_STATUS there is a test IF 1 = 2. If the test is true a message is displayed. The condition will obviously never be true, and we will never want to display a message in a BAPI. The reason why it is included is, that it create a reference for the message, so that the WHERE USED functionality can be used for the message. This is the SAP standard way to handle it, copied from the Company Code GetList BAPI.
INCLUDE LZBAPISTATUSUXX
THIS FILE IS GENERATED BY THE FUNCTION LIBRARY.             *
NEVER CHANGE IT MANUALLY, PLEASE!                           *
INCLUDE LZBAPISTATUSU02.
                    "Z_BAPI_GET_ORDER_SYSTEM_STATUS
INCLUDE LZBAPISTATUSTOP - Global data
FUNCTION-POOL ZBAPISTATUS.                  "MESSAGE-ID Z3
Types:
begin of Type_tj02t,
    istat like tj02t-istat,
    txt04 like tj02t-txt04,
    txt30 like tj02t-txt30,
end of type_tj02t.
DATA:
Declarations for TABLE parameter
T_BAPISTAT like ZBAPISTAT occurs 0,
G_BAPISTAT like ZBAPISTAT,
Table for object texts
t_tj02t    type type_tj02t occurs 0,
g_tj02t    type type_tj02t.
Structure for return messages
DATA:
BEGIN OF MESSAGE,
    MSGTY LIKE SY-MSGTY,
    MSGID LIKE SY-MSGID,
    MSGNO LIKE SY-MSGNO,
    MSGV1 LIKE SY-MSGV1,
    MSGV2 LIKE SY-MSGV2,
    MSGV3 LIKE SY-MSGV3,
    MSGV4 LIKE SY-MSGV4,
END OF MESSAGE.
INCLUDE LZBAPISTATUSF01 - Subroutines
***INCLUDE LZBAPISTATUSF01 .
*&      Form SET_RETURN_MESSAGE
This routine is used for setting the BAPI return message.
The routine is a standard routine for BAPIs that handles the message
structure for the BAPIRETURN structure. It has been copied from the
BAPI Company Code Getlist
     -->P_MESSAGE text
     <--P_RETURN text
form SET_RETURN_MESSAGE USING    VALUE(P_MESSAGE)   LIKE MESSAGE
                        CHANGING P_RETURN LIKE BAPIRETURN.
CHECK NOT MESSAGE IS INITIAL.
CALL FUNCTION 'BALW_BAPIRETURN_GET'
       EXPORTING
            TYPE       = P_MESSAGE-MSGTY
            CL         = P_MESSAGE-MSGID
            NUMBER     = P_MESSAGE-MSGNO
            PAR1       = P_MESSAGE-MSGV1
            PAR2       = P_MESSAGE-MSGV2
            PAR3       = P_MESSAGE-MSGV3
            PAR4       = P_MESSAGE-MSGV4
         LOG_NO     = ' '
         LOG_MSG_NO = ' '
       IMPORTING
            BAPIRETURN = P_RETURN
       EXCEPTIONS
            OTHERS     = 1.
endform.                    " SET_RETURN_MESSAGE
FUNCTION Z_BAPI_GET_ORDER_STATUS
FUNCTION z_bapi_get_order_system_status.
""Local interface:
*" IMPORTING
*"     VALUE(I_AUFNR) TYPE AUFNR
*"     VALUE(I_SPRAS) TYPE SPRAS DEFAULT SY-LANGU
*"     VALUE(I_EXCLUDEINACTIVE) TYPE CHAR1 OPTIONAL
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRETURN
*" TABLES
*"      T_BAPISTAT STRUCTURE ZBAPISTAT
DATA:
   l_aufnr LIKE afko-aufnr,
   l_objnr LIKE jest-objnr.
Check if order exists
SELECT SINGLE aufnr
    FROM afko
    INTO l_aufnr
    WHERE aufnr = BAPI_ORDER_STATUS_IMPORT-orderid.
IF sy-subrc NE 0.
    CLEAR message.
    message-msgty = 'E'.
    message-msgid = 'Z3'.
    message-msgno = '000'.
    message-msgv1 = BAPI_ORDER_STATUS_IMPORT-orderid.
    PERFORM set_return_message USING    message
                               CHANGING return.
    IF 1 = 2.
    The only reason to include this statement, that will obviously
    never execute, is that it will create a referecence so that you
    can find out where a particular message is being used. This
    functionality is used by the BAPIs programmed by SAP
      MESSAGE e000(z3).
    ENDIF.
ENDIF.
CHECK return IS INITIAL.
Read order status
CONCATENATE 'OR' BAPI_ORDER_STATUS_IMPORT-orderid INTO l_objnr.
IF BAPI_ORDER_STATUS_IMPORT-i_excludeinactive = 'X'.
    SELECT objnr stat inact
      FROM jest
      INTO TABLE t_bapistat
      WHERE objnr = l_objnr AND
            inact 'X'.
ELSE.
    SELECT objnr stat inact
      FROM jest
      INTO TABLE t_bapistat
      WHERE objnr = l_objnr.
ENDIF.
IF sy-subrc 0.
No object status found
    CLEAR message.
    message-msgty = 'E'.
    message-msgid = 'Z3'.
    message-msgno = '001'.
    message-msgv1 = BAPI_ORDER_STATUS_IMPORT-orderid.
    PERFORM set_return_message USING    message
                               CHANGING return.
    IF 1 = 2.
      MESSAGE e001(z3).
    ENDIF.
ENDIF.
CHECK return IS INITIAL.
Read order status texts
SELECT istat txt04 txt30
    FROM tj02t
    INTO TABLE t_tj02t
    FOR ALL ENTRIES IN t_bapistat
    WHERE istat = t_bapistat-stat AND
          spras = BAPI_ORDER_STATUS_IMPORT-i_spras.
SORT t_tj02t BY istat.
LOOP AT t_bapistat INTO g_bapistat.
    READ TABLE t_tj02t
      WITH KEY istat = g_bapistat-stat BINARY SEARCH
     INTO g_tj02t.
    IF sy-subrc = 0.
      MOVE:
        g_tj02t-txt04 TO g_bapistat-txt04,
        g_tj02t-txt30 TO g_bapistat-txt30.
      MODIFY t_bapistat FROM g_bapistat TRANSPORTING txt04 txt30.
    ENDIF.
ENDLOOP.
ENDFUNCTION.
OBJNR like JEST-OBJNR
STAT like JEST-STAT
INACT like JEST-INACT
TXT04 like TJ02T-TXT04
TXT30 likeTJ02T-TXT30
Important note:
You will have to define a structure for every parameter in the BAPI. You cannot use the same structures used in existing applications because BAPI structures are frozen when BAPIs are released and then there are restrictions on changing them.
STEP 3 - Create the API Method Using the BAPI WIZARD
The BAPI wizard is used toTo expose the remote function module as a BAPI. The wizard will generate some additional code, so the function module is a valid method of the BOR. This allows the BAPi to be called as a workflow method in addition to be called by an outside program.
Note: Each function module corresponds to a method in the BOR
Go to the Business Object Builder SWO1.
You can either create the new Object type as a subtype of an existing business object or create a new business object from scratch. In this example it would be obvious to create the Object type as a subtype of BUS2005 Production order. However, to illustrate how to create a new Object type from scratch, we will do this.
In the Object/Interface type field write the name of the new Business Object: ZORDERSTAT. Press enter and fill in the additional fields necessary to create the object type.
Supertype: Not relevant because we are creating our object from scratch
Program. This is the name of the program where the wizard generates code for the Object type, NOT the function module we created earlier. The program name must not be the name of an existing program.
Press enter and create the new business object. Note that when you create the business object a standard interface, an attribute ObjectType and the methods ExistenceCheck and Display are automatically generated. These cannot be changed !
The next step is to add the Z_BAPI_GET_ORDER_STATUS method to the business object. Select Utilities -> API methods -> Add method and write the name of the function module in the dialog box. Next the dialog ox show below will be shown. This is the start screen of the BAPI wizard. Proceed with wizard by pressing the button.
After you have finished the wizard, you will notice that the ZGetOrderStatus has been added to the business object:
You can double-click on the method to see its properties. To use the business object you must change the Object type status to Implemented. Use menu Edit->Change releases status->Object type->To implemented. No you can test the object (Press F8).
Note that the BAPI wizard has added a wrapper class for the function module so it can be sued as method in the business object. Choose menu Goto->Program to display the program:
          Implementation of object type ZORDERSTAT           *****
INCLUDE <OBJECT>.
BEGIN_DATA OBJECT. " Do not change.. DATA is generated
only private members may be inserted into structure private
DATA:
" begin of private,
"   to declare private attributes remove comments and
"   insert private attributes here ...
" end of private,
      KEY LIKE SWOTOBJID-OBJKEY.
END_DATA OBJECT. " Do not change.. DATA is generated
BEGIN_METHOD ZGETORDERSTATUS CHANGING CONTAINER.
DATA:
      BAPIORDERSTATUSIMPORT LIKE ZBAPI_ORDER_STATUS_IMPORT,
      RETURN LIKE BAPIRETURN,
      TBAPISTAT LIKE ZBAPISTAT OCCURS 0.
SWC_GET_ELEMENT CONTAINER 'BapiOrderStatusImport'
       BAPIORDERSTATUSIMPORT.
SWC_GET_TABLE CONTAINER 'TBapistat' TBAPISTAT.
CALL FUNCTION 'Z_BAPI_GET_ORDER_STATUS'
    EXPORTING
      BAPI_ORDER_STATUS_IMPORT = BAPIORDERSTATUSIMPORT
    IMPORTING
      RETURN = RETURN
    TABLES
      T_BAPISTAT = TBAPISTAT
    EXCEPTIONS
      OTHERS = 01.
CASE SY-SUBRC.
    WHEN 0.            " OK
    WHEN OTHERS.       " to be implemented
ENDCASE.
SWC_SET_ELEMENT CONTAINER 'Return' RETURN.
SWC_SET_TABLE CONTAINER 'TBapistat' TBAPISTAT.
END_METHOD.
STEP 4 - Final stepsWhen the Business object has been checked and the documentation created, the following steps must be carried out:
Release the BAPI function module (in the Function Builder).
Release the business object type (in the BOR ObjectType -> Change release status to -> Implemented ).
Release the BAPI as a method in the BOR (Release the methods you has created - Set the cursor on the method then
Edit -> Change release status -> Object type component -> To released )
For potential write BAPIs: Release the IDoc and its segments
You can now display the BAPI in the BAPI Explorer:
for detailed expalnation
http://www.erpgenie.com/abap/bapi/example.htm
do reward if helpful

IDOC/ BAPI for transaction FB60

Hi Experts,
Can anybody tell me IDOC/ BAPI for transaction FB60 for document type (KR = Original Invoice).
Thanks

Hi Venkata,
Please refer below code, this works similar to FB60.
REPORT z_bapi_test.
*REPORT acc_bapi_test_document .
SELECTION-SCREEN BEGIN OF BLOCK bl01 .
PARAMETERS:
check_l RADIOBUTTON GROUP rb1,
check_a DEFAULT 'X' RADIOBUTTON GROUP rb1,
post RADIOBUTTON GROUP rb1.
SELECTION-SCREEN ULINE.
PARAMETERS:
rev_c RADIOBUTTON GROUP rb1,
rev_p RADIOBUTTON GROUP rb1.
SELECTION-SCREEN ULINE.
PARAMETERS:
ref_key LIKE bapiache01-obj_key DEFAULT 'TEST000001BAPICALL',
dest LIKE bdi_logsys-logsys DEFAULT ' '.
SELECTION-SCREEN END OF BLOCK bl01 .
DATA:
gd_documentheader LIKE bapiache09,
gd_customercpd LIKE bapiacpa09,
gd_fica_hd LIKE bapiaccahd,
it_accountreceivable LIKE TABLE OF bapiacar09 WITH HEADER LINE,
it_accountgl LIKE TABLE OF bapiacgl09 WITH HEADER LINE,
it_accounttax LIKE TABLE OF bapiactx09 WITH HEADER LINE,
it_criteria LIKE TABLE OF bapiackec9 WITH HEADER LINE,
it_valuefield LIKE TABLE OF bapiackev9 WITH HEADER LINE,
it_currencyamount LIKE TABLE OF bapiaccr09 WITH HEADER LINE,
it_return LIKE TABLE OF bapiret2 WITH HEADER LINE,
it_receivers LIKE TABLE OF bdi_logsys WITH HEADER LINE,
it_fica_it LIKE TABLE OF bapiaccait WITH HEADER LINE,
it_accountpayable LIKE TABLE OF bapiacap09 WITH HEADER LINE,
it_paymentcard LIKE TABLE OF bapiacpc09 WITH HEADER LINE,
it_ext LIKE TABLE OF bapiacextc WITH HEADER LINE.
it_re LIKE TABLE OF bapiacre09 WITH HEADER LINE,
it_ext2 LIKE TABLE OF bapiparex WITH HEADER LINE.
PERFORM fill_internal_tables.
IF check_l = 'X'.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
DESTINATION dest
EXPORTING
documentheader = gd_documentheader
customercpd = gd_customercpd
contractheader = gd_fica_hd
TABLES
accountgl = it_accountgl
accountreceivable = it_accountreceivable
accountpayable = it_accountpayable
accounttax = it_accounttax
currencyamount = it_currencyamount
criteria = it_criteria
valuefield = it_valuefield
extension1 = it_ext
return = it_return
paymentcard = it_paymentcard
contractitem = it_fica_it.
extension2 = it_ext2
realestate = it_re.
WRITE: / 'Result of check lines:'. "#EC NOTEXT
PERFORM show_messages.
ENDIF.
IF check_a = 'X'.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
DESTINATION dest
EXPORTING
documentheader = gd_documentheader
customercpd = gd_customercpd
contractheader = gd_fica_hd
TABLES
accountgl = it_accountgl
accountreceivable = it_accountreceivable
accountpayable = it_accountpayable
accounttax = it_accounttax
currencyamount = it_currencyamount
criteria = it_criteria
valuefield = it_valuefield
extension1 = it_ext
return = it_return
paymentcard = it_paymentcard
contractitem = it_fica_it.
extension2 = it_ext2
realestate = it_re.
WRITE: / 'Result of check all:'. "#EC NOTEXT
PERFORM show_messages.
ENDIF.
IF post = 'X'.
DATA: l_type LIKE gd_documentheader-obj_type,
l_key LIKE gd_documentheader-obj_key,
l_sys LIKE gd_documentheader-obj_sys.
IF dest = space OR
dest = gd_documentheader-obj_sys.
post synchron
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader = gd_documentheader
customercpd = gd_customercpd
contractheader = gd_fica_hd
IMPORTING
obj_type = l_type
obj_key = l_key
obj_sys = l_sys
TABLES
accountgl = it_accountgl
accountreceivable = it_accountreceivable
accountpayable = it_accountpayable
accounttax = it_accounttax
currencyamount = it_currencyamount
criteria = it_criteria
valuefield = it_valuefield
extension1 = it_ext
return = it_return
paymentcard = it_paymentcard
contractitem = it_fica_it.
extension2 = it_ext2
realestate = it_re.
WRITE: / 'Result of post:'. "#EC NOTEXT
PERFORM show_messages.
ELSE.
create Idoc
it_receivers-logsys = dest.
APPEND it_receivers.
CALL FUNCTION 'ALE_ACC_DOCUMENT_POST'
EXPORTING
documentheader = gd_documentheader
customercpd = gd_customercpd
contractheader = gd_fica_hd
TABLES
accountgl = it_accountgl
accountreceivable = it_accountreceivable
accountpayable = it_accountpayable
accounttax = it_accounttax
currencyamount = it_currencyamount
criteria = it_criteria
valuefield = it_valuefield
extension1 = it_ext
paymentcard = it_paymentcard
contractitem = it_fica_it
extension2 = it_ext2
realestate = it_re
receivers = it_receivers
COMMUNICATION_DOCUMENTS* APPLICATION_OBJECTS EXCEPTIONS
error_creating_idocs = 1
OTHERS = 2 .
IF sy-subrc = 0.
WRITE: / 'IDoc created'. "#EC NOTEXT
ELSE.
WRITE: sy-msgid.
ENDIF.
ENDIF.
ENDIF.
IF rev_p = 'X' OR rev_c = 'X'.
DATA: rev LIKE bapiacrev,
rev_key LIKE ref_key.
rev_key = ref_key.
rev_key(1) = 'R'.
rev-obj_type = gd_documentheader-obj_type.
rev-obj_key = rev_key.
rev-obj_sys = gd_documentheader-obj_sys.
rev-obj_key_r = ref_key.
IF rev_c IS INITIAL.
IF dest = space OR
dest = gd_documentheader-obj_sys.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_REV_POST'
EXPORTING
reversal = rev
bus_act = gd_documentheader-bus_act
TABLES
return = it_return.
ELSE.
it_receivers-logsys = dest.
APPEND it_receivers.
CALL FUNCTION 'ALE_ACC_DOCUMENT_REV_POST'
EXPORTING
reversal = rev
busact = gd_documentheader-bus_act
OBJ_TYPE = 'BUS6035'
SERIAL_ID = '0'
TABLES
receivers = it_receivers
COMMUNICATION_DOCUMENTS* APPLICATION_OBJECTS EXCEPTIONS
error_creating_idocs = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
WRITE: / 'IDoc created'. "#EC NOTEXT
ENDIF.
ENDIF.
ELSE.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_REV_CHECK'
EXPORTING
reversal = rev
bus_act = gd_documentheader-bus_act
TABLES
return = it_return.
ENDIF.
WRITE: / 'Result of Reversal Posting:'. "#EC NOTEXT
PERFORM show_messages.
ENDIF.
COMMIT WORK.
Kindly close if it helps you.
Regards
Abhii...

FM or BAPI for transaction F871

Hello!
There are any Function Module or BAPI for transaction F871?
Thanks a lot!

Hi,
Upon looking at FMFI package I only found the FM for change which is FI_PSO_FMPSO_CHANGE.. you can check the rest of the FM's below
FI_PSO_FMPSO_AGENTS
FI_PSO_FMPSO_CHANGE
FI_PSO_FMPSO_DISPLAY
FI_PSO_FMPSO_DOC_CHECK
FI_PSO_FMPSO_EVENT_00002213
FI_PSO_FMPSO_EVENT_00002214
FI_PSO_FMPSO_EVENT_00002216_E
FI_PSO_FMPSO_EVENT_00002218
FI_PSO_FMPSO_FIPP_DOC_DELETED
FI_PSO_FMPSO_FIPP_EVENT
FI_PSO_FMPSO_FIPP_PSOWF_UPDATE
FI_PSO_FMPSO_GROUP_DETERMINE
FI_PSO_FMPSO_HEADER_CHG_CHECK
FI_PSO_FMPSO_LIST_DISPLAY
FI_PSO_FMPSO_LOT_DELETE_CHECK
FI_PSO_FMPSO_POST_ALL
FI_PSO_FMPSO_RELEASE
FI_PSO_FMPSO_ROLE_DETERMINE
FI_PSO_FMPSO_WF_CHECK
FI_PSO_FMPSO_WF_DETERMINE
FI_PSO_FMPSO_WF_DISPLAY
FI_PSO_FMPSO_WF_EVENT
FI_PSO_FMPSO_WF_EVENT_CREATE
FI_PSO_FMPSO_WF_EVENT_REFRESH
FI_PSO_FMPSO_WF_EVENT_REFRESH
FI_PSO_FMPSO_WF_MAIN
Regards,
Leonard Chomi

Any BAPI for Transaction VF01??

Hi Experts ,
Is there any Bapi for transaction VF01.
If it is then plz. do help me to use that one with coding .
Regards,
Rahul

Hi,
Check this sample code of creating the billing document using the bapi BAPI_BILLINGDOC_CREATEMULTIPLE.
DATA: t_success TYPE STANDARD TABLE OF bapivbrksuccess WITH HEADER LINE.
DATA: t_billing TYPE STANDARD TABLE OF bapivbrk WITH HEADER LINE.
DATA: t_return TYPE STANDARD TABLE OF bapireturn1 WITH HEADER LINE.
t_billing-salesorg = vbak-vkorg.
t_billing-DISTR_CHAN = vbak-vtweg.
t_billing-DIVISION = vbak-spart.
t_billing-DOC_TYPE = vbak-auart.
t_billing-ref_doc = vbak-vbeln.
t_billing-ref_item = vbap-posnr.
t_billing-doc_number = vbak-vbeln.
t_billing-ITM_NUMBER = vbap-posnr.
t_billing-ordbilltyp = 'BILLING TYPE'.
t_billing-price_date = sy-datum.
t_billing-ref_doc_ca = vbak-vbtyp.
t_billing-sold_to = vbak-kunnr.
t_billing-material = vbap-matnr.
t_billing-plant = vbap-werks.
APPEND t_billing.
CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
TABLES
billingdatain = t_billing
return = t_return
success = t_success.
commit work.
<b>Reward points</b>
Regards

FM/BAPI for transaction PPOSE

Hello,
Is there any fm/bapi for transaction PPOSE?
thank you!

Hi,
You dont have single FM or BAPI to meet this requirement.
you need to use RH_STRUC_GET and HR_READ_INFOTYPE to get the details
Thanks
Bala Duvvuri

BAPI for transaction MI10

Hi Gurus,
Can you please tell me if there is any BAPI for transaction MI10(post document,count and difference: initial screen).
Is there any standard IDOC type for inventory management or any message type associated with inventory management IDoc.
Thanks

Hi,
check with below BAPIs
BAPI_MATPHYSINV_CHANGECOUNT Change count for particular items of a phys. inv. doc.
BAPI_MATPHYSINV_COUNT Enter count for particular items of a phys. inv. doc.
BAPI_MATPHYSINV_CREATE Create physical inventory document
BAPI_MATPHYSINV_CREATE_MULT Create physical inventory document
BAPI_MATPHYSINV_GETDETAIL Read items for a physical inventory document
BAPI_MATPHYSINV_GETITEMS Read list of physical inventory documents with items
BAPI_MATPHYSINV_GETLIST Read list of phys. inv. documents
BAPI_MATPHYSINV_POSTDIFF Post differences for certain items in a phys. inv. document
Thanks,
Asit Purbey.

Bapi for transaction FOB1

Hi everyone,
Is there a BAPI for transaction FOB1 ? I allready looked into some lists of BAPI's, but i'm not sure what to be looking for...
Thanks in advance...
Nuno

Anyone ? Isn't this possible ? Do i have to do it with batch? If so, if i put the batch running in background, how can i caught the number of the documents created to print them on screen ?

BAPI for Transaction Codes FMV1 and FMZ1

hi,
is there any bapi for transaction codes FMV1 and FMZ1?!
please advice!
thanks JE

HI,
For FMZ1
use this
FMFR_CREATE_FROM_DATA
FMFR_CHANGE_FROM_DATA
FMFR_CHANGE_COMPLETION_FLAG
Regards
Hiren K.Chitalia

Bapi for transaction va21

hi!
is there any bapi for transaction va21 creating qoutation?
regards
yifat

Hi Yifat,
There are two BAPI's to create Quotation.
BAPI_QUOTATION_CREATEFROMDATA
This BAPI has been released.
BAPI_QUOTATION_CREATEFROMDATA2
This BAPI has not been released yet.
There is small problem when you use these two BAPI's they dont update the document flow (i.e) these BAPI's will allow you to create 'n' number quotations for a single Inquiry, which according to business is not allowed.
You can do an alternate method, which you can use a BDC to create a Quotation and the updation part for that Quotation can be done with a BAPI 'BAPI_CUSTOMERQUOTATION_CHANGE'.
Hope this might be useful.
Regards,
Tushar
Reward points if found useful.

BAPI for transaction CS08

Is there a BAPI for transaction CS08 (BOM - change plant assignment)?

Try CSAP_MAT_BOM_MAINTAIN
or
CSAP_MAT_BOM_OPEN
CSAP_BOM_ITEM_MAINTAIN
CSAP_MAT_BOM_CLOSE
Edited by: ksd on Nov 27, 2009 9:48 AM

How to implement bapi for transaction code f-02 for multiple line items

Hi All,
I am having one requirement to of implementing bapi for tcode f-02.
I have identified the name of the badi e.i. BAPI_ACC_GL_POSTING_POST.
but i dont have any idea how implement it.
i have multiple line items for one header.
Please help me in this.
Regards,
Shoaib.

HI
In recording once u save, the recording comings out the transaction.
If u want the pop-up to display before save. Then in recording also
after entering all data and before Save press enter or do check.Try
this way after that save the transaction.
Regards,
Raghu.

Validation for BAPI for transaction FV70 and FV75

Hi all,
Can any1 tell me Validation BAPIs for T-Codes FV70 and FV75.
Please bear the following points
1. The BAPI should NOT create Parked Customer Invoices, they should just validate that the data to create the customer invoice.
2. The Transaction are used for CUSTOMER invoices NOt Vendor.
3. I've searched SDN and I got the follwing BAPIs
              a. BAPI_INCOMINGINVOICE_PARK
              b. MRM_INVOICE_PARK
              c. MRM_PARKED_INVOICE_ACCDATA
But they are all for Vendor Invoices and CREATE parking invoices, Both the things I do not want.
If someone knows the name of the BAPI please forward to me at the earliest.
Cheers
Abhishek

BAPI-step by step procedure
http://www.sapgenie.com/abap/bapi/example.htm
list of all BAPI's
http://www.planetsap.com/LIST_ALL_BAPIs.htm

BAPI for transaction F-30

Similar Messages

Maybe you are looking for