BAPI From ORACLE Form 6 i

Hi all,
I am trying to learn BAPI.
I have created one simple BAPI for material Info, in which i am giving material Number (MATNR) as input and collecting Info like MATNR,WERKS,MBLNR,MENGE,MEINS of that material.
BAPI is working fine in SAP and i am getting correct output.
But now i want to access this from ORACLE Form 6 i.
Thanks in advance.....

Not yet answered

Similar Messages

BAPI From ORACLE

Hi all,
I am trying to learn BAPI.
I have created one simple BAPI for material Info, in which i am giving material Number (MATNR) as input and collecting Info like MATNR,WERKS,MBLNR,MENGE,MEINS of that material.
BAPI is working fine in SAP and i am getting correct output.
But now i want to access this from ORACLE Form 6 i.
Thanks in advance.....

Hi Dhwani,
what you need to do is what Oracle call "Calling External Procedures". They support a variety of differing technical ways of doing this including via a .DLL, a Java Library and Web Services.
Unfortunately I am not aware of which of these capabilities are available in Forms 6.
I found <a href="http://download-uk.oracle.com/docs/cd/B14117_01/appdev.101/b10795/adfns_ex.htm">this</a> for Oracle 10g using C or Java.
And <a href="http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html">this one</a> shows how to call a web service although it does so via a java proxy.
Cheers
Graham

Calling web service from oracle forms 10g

Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://gend:83/DesignService.svc?wsdl
The service was developed by us.
Calling the web service using JDeveloper works fine but when I complie in Oracle Forms it returns wrong number of types of arguments in call SENDHELLO.
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
xo ora_java.jobject;
rv varchar2(2000);
ex ora_java.jobject;
str varchar2(100);
BEGIN
jo := GendServiceClient.new;
rv := GendServiceClient.sendHello('Nora');
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
message(Exception_.toString(ex));
END;
Any help/ideas on this is greatly appreciated. Thanks.
Edited by: KE Nora Loera on Jun 1, 2012 1:24 PM

My primary skill is PL/SQL but the only information I found on Oracle's site to call a web service from a 10g Form was creating a jar file and importing the java class. Since I don't want to ask our corporate IT to make changes on the UNIX box for the jar files I went a different route.
I use UTL_HTTP.BEGIN_REQUEST to call a URL then load I load the data to a table as a CLOB since we have more than 4000 characters. Now I need to parse the XML and load it into a form. I have never done this so if there is a helpful site please let me know. I have looked at several sites but none do what I want.
Thanks

Calling web service from oracle forms fails with ORA_JAVA.JAVA_ERROR

Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://www.webservicex.net/CurrencyConverter.asmx?wsdl
Calling the web service using JDeveloper works fine but from Oracle Forms returns ORA_JAVA.JAVA_ERROR; Unable to call out to Java, Invalid object type for argument 1
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
rv ora_java.jobject;
ex ora_java.jobject;
outString varchar2(2000);
BEGIN
jo:= CurrencyConvertorStub.new;
--This will get the exchange rate from US Dollars to UK Sterling.
rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD');
message (float_.floatValue(RV));
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
outString := Exception_.toString(ex);
message(outString);
END;
Any help/ideas on this is greatly appreciated. Thanks.

Yes, it is the message line - so basically this call fails => rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD'); and control goes in the exception block
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
Below is the code from java stub that was generated using JDeveloper by using web services stub/skeleton and associating the WSDL
public Double ConversionRate(String FromCurrency, String ToCurrency) throws Exception
URL endpointURL = new URL(endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
String wrappingName = "ConversionRate";
String targetNamespace = "http://www.webserviceX.NET/";
Vector requestData = new Vector();
requestData.add(new Object[] {"FromCurrency", FromCurrency});
requestData.add(new Object[] {"ToCurrency", ToCurrency});
requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData));
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.setSOAPTransport(m_httpConnection);
msg.send(endpointURL, "http://www.webserviceX.NET/ConversionRate", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
Vector responseData = responseBody.getBodyEntries();
return (Double)fromElement((Element)responseData.elementAt(0), java.lang.Double.class);
}

Passing a value for date parameter from Oracle Forms to BIP

Hi
I have created a report with the following SQL query:
select
d_tables.d_seq,
to_date(d_tables.d_created) creation_date,
d_tables.d_created_by created_by,
d_tables.d_pk,
d_tables.table_name,
d_tables.comments
from
d_tables, d_applications
where
d_tables.d_ppk = d_applications.d_pk
and to_date(d_tables.d_created) >= nvl(:P_CRE_DATE_FROM, to_date(d_tables.d_created))
and to_date(d_tables.d_created) <= nvl(:P_CRE_DATE_TO, to_date(d_tables.d_created))
The parameters P_CRE_DATE_FROM and P_CRE_DATE_TO have been set up as date in BI Publisher with format dd-MMM-yyyy
The report works fine when launched in BI Publisher.
I want to call this report from Oracle Forms and I'm trying to pass the values for both the parameters. However, the report does not generate output based on values passed.
Does it have to do with datatype? Does anyone know a solution for this?
Kind regards,
Aparna

Thanks for your suggestion. I am already referring to the whitepaper and have integrated Forms with BI Publisher. The parameter passing is working fine for a varchar2 type of parameter. However, for a date type, there seems to be some problem.

How to get report in excel format instead of pdf from oracle forms.

Hi,
How to get report in excel format instead of pdf from oracle forms.
Form & Report developer 10g
report format .rdf

create a report using report builder.
call the report from form using the following procedure
DECLARE
     RO_Report_ID REPORT_OBJECT;
     Str_Report_Server_Job VARCHAR2(100);
     Str_Job_ID VARCHAR2(100);
     Str_URL VARCHAR2(100);
     PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
     IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
     END IF;
     PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
     RO_Report_ID := FIND_REPORT_OBJECT('RP2RRO');
     Add_Parameter(pl_id,'P_SUPCODE',TEXT_PARAMETER,:CONTROL.S_CODE);
Add_Parameter(pl_id,'P_INVOICE_NO',TEXT_PARAMETER,:CONTROL.IN_NO);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'INVOICE_REG_DETAILS.rep');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'SPREADSHEET');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_dbserver_frhome1');
     Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
     Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_dbserver_frhome1') + 2, LENGTH(Str_Report_Server_Job));
     Str_URL      := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_dbserver_frhome1';
     WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
     DESTROY_PARAMETER_LIST(PL_ID);
END;

Calling Report from Oracle form 11g

I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AM

Hi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers,

Calling a report from oracle form 10g

how to call a report from oracle form 10g

Please see the link:
http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf

Calling Report From Oracle Forms

Hi
I am calling this one report from oracle forms, I am using global temporary table to run that report. I am first inserting data into the temporary table through oracle form and then i am calling report in that form to view the data in that temporary table. The problem is, we can not view the data of an other session if we are using temporary table. When i call report from that form a new session get created due to which i can not see the data. Is there any method of calling report from oracle form that a same session is used to run the report?
Thanks.

As you mention Forms and Reports do not share the database session. I had the same problem and resolved it using record groups and DATA_PARAMETER to transfer data from Forms to Reports. You could also read the Note 110495.1 on Metalink to find useful information regarding this issue.
Adi

How to print BIP reports from Oracle Forms?

Hi all,
I have a question in regards to printing BIP reports from Oracle Forms... We are aiming for a server installation of BIP with integration to Oracle Forms using SSO to handle security. We use Forms built-in web.show_document to render and view the report in PDF/Excel etc... We would like to by pass the viewing and print some of these reports directly to the printer.
Any idea/suggestions how we can go about this?
Thanks in advance for your time.
Yahya

Yahya,
via HTTP it's not possible to send a report directly to the printer. You had to go via the Scheduler, which is able to do that. With the WebService API you can call a report with the Scheduler and Execute Immediate.
Regards
Rainer

How to Call a jasper report from Oracle Forms 6i.

Hi
Can anybody tel me how to Call a jasper report from ORacle Forms 6i.
Thanks & Regards
Bango

Forms 6i client/server? Use the HOST command to call the report. Since a Jasper report is just a call to a url, it will be something like:
v_url := '<your url to the report>';
host ('cmd /c start '||v_url);If it's web Forms 6i it even easier. Just use web.show_document(<url>).

Call a web services from oracle forms 10

I have to call a web services from oracle forms.
The version of the database is oracle 11gr2. the version of the forms is 10.1.2.0.2.
I allready did the proxy creation and the import class within forms.
I have 2 questions:
1.
I created the following procedure:
PROCEDURE call_WS IS
vobject1 ORA_JAVA.JOBJECT;
vobject2 ORA_JAVA.JOBJECT;
BEGIN
vobject1 := WSEvaluarReglaCondicionComerci.new();
vobject2 := WSEvaluarReglaCondicionComerci.listarValoresAtributoEvento(vobject1, 702, 2217, null, null, null);
END;
the function I calling:
FUNCTION listarValoresAtributoEvento(
obj ORA_JAVA.JOBJECT,
a0 ORA_JAVA.JOBJECT,
a1 ORA_JAVA.JOBJECT,
a2 ORA_JAVA.JOBJECT,
a3 VARCHAR2,
a4 ORA_JAVA.JOBJECT) RETURN ORA_JAVA.JOBJECT;
Note that the parameters is ORA_JAVA_JOBJECT and I need to send numbers. I understand that when I import the classes, because in the WS those parameters are defined as BigDecimal, Forms understand them as java object but when I compile it reports the error: "numero o tipo de argumento erroneo al llamar..." type error.
So the question is, how Cast the numbers to Java Object to send them.
I have read in a web page that one option is to change in the web service the type of the parameters but that is not an option.
2.
The WS returns a super big XML as answer, so how I can parse the result into an Object type?...
The object structure is:
TYPE opciones_obj AS OBJECT
(strindice VARCHAR2 (4000),
nombrecompleto VARCHAR2 (4000),
nombre VARCHAR2 (4000),
strtipodato VARCHAR2 (4000),
codigoopcion NUMBER,
floatval FLOAT,
strtipo VARCHAR2 (4000),
strval VARCHAR2 (4000));
and the tags to extract is:
COLUMNS strindice VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strIndice"]/ns2:value',
nombrecompleto VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="nombreCompleto"]/ns2:value',
nombre VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="nombre"]/ns2:value',
strtipodato VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strTipoDato"]/ns2:value',
codigoopcion NUMBER
PATH 'ns2:mapEntry[ns2:key="codigoOpcion"]/ns2:value',
floatval FLOAT
PATH 'ns2:mapEntry[ns2:key="floatVal"]/ns2:value',
strtipo VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strTipo"]/ns2:value',
strval VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strVal"]/ns2:value') x;
xquery / xmltype aparently is not an option because the xml is too big.
I will appreciate your answers.
Thanks.
Edited by: user13058213 on 26-ene-2012 16:02

i created jar file to call it from forms
Could you be a little bit less vague about what you exactly did?
Anyway; see here http://bit.ly/10VVoMR
cheers

URGENT!!! calling crystal reports from oracle forms 10g

Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thanks

hi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM

Calling Crystal Reports from Oracle Forms 10G

Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.

Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM

Calling a procedure from Oracle Forms with OUT parameter

HI,
Can anyone tell me in detail how to call a procedure with OUT parameters from Oracle Forms 6i ?
Thanks in advance.

Hello,
Just provide the out parameter in the call:
Declare
amount number; -- OUT number argument populated by the procedure
Begin
-- call the X procedure --
x( amount ) ;
End;Francois

BAPI From ORACLE Form 6 i

Similar Messages

Maybe you are looking for