BAPI_GLX_GETDOCITEMS and no Cost Center Data

Hi,
i'm using the BAPI "BAPI_GLX_GETDOCITEMS" to extract all documents from General Ledger. This BAPI returs the structure "ITEMSLIST" which contains a field for the Cost Center. I took a look at several Documents via FB03 and there are many documents with a specified Cost Center.
When i use the BAPI to extract all documents for a specific Company Code, the Cost Center field is always empty.
Does anyone know what the problem might be and how i could fix this?
I am using Pentaho Data Integration (and it's SAP Plugin) to connect to a SAP R/3 System.
Thanks in advance!

Hi Hugo,
thanks for the answer. You were right, i am in New GL and I just checked the table "FAGLFLEXA" and there is really no Cost Center saved at any table entry.
Is there another possibility to get Cost Center Data without activating the Cost Center Scenario (FIN_CCA), perhaps extracting documents from SAP CO? I've heard, that New GL supports a real time integration of CO with FI.
Thanks a lot in advance!

Similar Messages

Mandatory fields for creation of FB60(vendor invoice),and FK01(cost center)

Hi all,
can u plz send me the mandatory fields(along with discription) for creation of FB60(vendor invoice),and FK01(cost center).
thank u,
Srinivas Reddy.

The FK01 is the transaction used to create a Vendor.
The mandatory fields are:
a. NAME1: For Name
b. SORT1: For CUIT number.
c. SORT2: For alternative CUIT number.
d. CITY1: For city.
e. STCD1: Tax Number.
f. Others depending the case.
For FB60 (Vendor invoice) the mandatory fields are:
a. ACCNT: Number of Vendor Account.
b. BLDAT: Date.
c. XBLNR: Reference Number.
d. WRBTR: Invoice Amount.
e. HKONT: G/L Account Number.
f. WRBTR: Invoice Amount. The same as d but in the item.
g.MWSKZ: Tax Type. Depending the case.
h. KOSTL: Cost Center. Depending the case but is highly probable that the field were mandatory.
i. Others. Depending the case.
I have given to you the most probably fields that are mandatory for those transactions.
Your Sincerely
Leonardo Lopez
FI Consultant

Cost center data transfer

Hi
I am searching for a progra which can send cost center data to other systms. I have got one transaction BD16(program rbdsecos)
but in this we we have to give the cost center name
but my requirement is sending data of all cost centers with a variant.
Please help me.
Regards
Manu

Hi,
Yes Controlling Area and Cost Centre Code are mandatory. Get a table dump of table CSKS for all cost centre code and enter in the selection screen using multiple selection feature. Do the same for controlling area from table TKA01 and run the report.
Hope this helps.
Regds,
Rudra

Cost center data

Hi
I am searching for a progra which can send cost center data to other systms. I have got one transaction BD16(program rbdsecos)
but in this we we have to give the cost center name
but my requirement is sending data of all cost centers with a variant.
Please help me.
Regards
Manu

Hello,
You can still make use of BD16. The 2 required fields are Controlling area and Cost center. If you need to send data for all cost centers why not just put in a "*" in the cost center field and save the variant. This should solve your issue. Let me know if not.
Regards,
I. Shekar

How to design and develop Cost center with SAP BPC 5.1 ?

Hi all,
Can any one tell me how to design and develop cost center planning (what are the steps to follow) using SAP BPC 5.1?
Thanks,
Sandy

Hi Sandeep,
1:We need to look at whether cost center planning is tied to a profit center level and/or to a company code level
2:We could have dimensions like Account(which in this case would reflect cost element),category,entity,time with additional dimension s like profit center(cost centers can have a direct mapping to profit center,usage of properties would help in here),WBS ,projects,investment position id's etc.
3:We could look at different applications like HR(pay roll related expenses),admin,capex(to bring in depreciation values) etc to bring in data to pull in data to different cost centers either directly or via script logic(usage of destination_app)
4:For those values not tied up to profit centers ,we would look at allocating/distributing the expenses to different cost elements
5:We need to decide whether we do the planning on a monthly/periodic vs yearly level where in we would look at actual values and incrementing at a certain % to fill in as the base for our planning(using category=actual/plan plus timeperiods).We could look at Top down vs botton up approach as well to segregate the planned costs
6:Consideration should be made at security level to identify/restrict different users who needs to access specific cost centers
Yes,this is just a small jist of structure,there are 100's of other considerations which would come into picture from a business requirement level.
regards
shyam

Cost center data distribution through change pointers

HI
I need to distribute cost center data through change pointers
Can anyone please tell me the steps i need to follow
please dont give links, but would be helpful if some1 can tell me step by step
and how to do testing, ie which tables i need to check to see whether my change pointers are working or not.
Thanks in advance
Regards
Manu

Hi,
Please follow the following steps.
Check if Change pointer is active Globally via BD61
Check if change pointer is active for COSMAS via BD50
Maintain required field entries for which you need the change pointer to be triggered vai BD52.
Maintain distribution model for Source and Traget System for message type COSMAS in source system
Maintain partner profile via WE20.
Then run transaction BD21 to trigger change pointer idocs.
Hope it helps.
Regds,
Rudra

COST CENTER DATA NOT populated

Hi experts,
I am facing problem with the follwing, please help me as it is urgent and points will be assigned.
I am working on BI 7, I had two extractors from R/3 0FI_GL_4 and 0FI_GL_6. Extracted data to BI system, In BI system created two DSO namely 0FIGL_O02 and ZFI_GL_6. so I had moved the data from 0FI_GL_4 to 0FIGL_O02 ( P&L accounts) and from 0FI_GL_6 to ZFI_GL_6 ( Balance sheet accounts).
So here what we did is that we had created created one more DSO ZFI_GL_7, in this DSO we had loaded the both the DSO data of 0FIGL_O02 and ZFI_GL_6.
so here comes the problem.
Balance sheet accounts would not have Cost Centre values and in turn P & L accounts would have Cost Centre data. this is true.
But i am not able to look the costcentre data for all the GL accountsin the DSO ZFI_GL_7, only some few GL accounts have the data some does not have.
In this regard please help me. and it is very much urget.
For your kind information , one more info is there please note.
Whatever the data is coming to DSO ZFI_GL_7 is copied into the another DSO ZFI_GL_8 ( HYPERION DATA LOAD) , FOR THIS WE HAD WRITTEN THE ABAP PROGRAM also.
So can anyone help.
Hi ABAP experts,
Please find the above information,
Since I had to write the ABAP program in 0FIGL_O02 in Transformations, the program is already there, but the delete statement shows like this.
"DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'."
In this case I want to allow the GL accounts data with cost centre data, so that I want to see for all GL accounts the cost center data will be populated. so Please help me what is the process to write the code.
At the same time I want to write the ABAP code at ZFI_GL_6 to restrict the GL accounts, since this accounts are already present in the DSO, so that we cannot get the duplicate data in the ZFI_GL_7 DSO.
So Please help me in this regard.
Thanks
Sekhar

Hi ABAP experts,
Please find the above information,
Since I had to write the ABAP program in 0FIGL_O02 in Transformations, the program is already there, but the delete statement shows like this.
"DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'."
In this case I want to allow the GL accounts data with cost centre data, so that I want to see for all GL accounts the cost center data will be populated. so Please help me what is the process to write the code.
At the same time I want to write the ABAP code at ZFI_GL_6 to restrict the GL accounts, since this accounts are already present in the DSO, so that we cannot get the duplicate data in the ZFI_GL_7 DSO.
So Please help me in this regard.
Thanks
Sekhar

HRP1001 subtype A011....Position to Cost center data

Hi Folks,
I am new to HR data replication from HCM to ECC. I am trying to replicate the HR Organizational data from HCM to ECC, THough I am able to replicate all the organizational data I am having issue with HRP1001 Subtype: A011 (Position to Cost Center data). I am using the IDOC type HRMD_ABA and I see all the IDOCS successfully made it to ECC with status 3; but still when I look into HRP1001 (plan version 01, Object TYpe :S; subtype:A011) I see zero entries. As there are no failed IDOCs it is difficult to understand what is stopping the entries to be populated. Please advise if any one has any suggestions or if anyone has encountered similar issue.

Kalyan,
Shouldn't the object type be S. Anyway I even tried with O but still no luck.
But I observed one thing, there are no entries in HRMDORIGIN and when I tried to run the program RHALEHRMDORIGINIT, I am getting a dump
Category               ABAP Programming Error
Runtime Errors         SYSTEM_LOAD_OF_PROGRAM_FAILED
ABAP Program           RHALEHRMDORIGINIT
Short text
    Illegal interruption of the event LOAD-OF-PROGRAM.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "RHALEHRMDORIGINIT" had to be terminated because it
     has
    come across a statement that unfortunately cannot be executed.
Error analysis
    During the flow of the event LOAD-OF-PROGRAM (event for the
    initialization of an ABAP program), a condition occurred under which
    the event was to be left early. This is not permitted as it would
    result in an inconsistent status in the ABAP program.
Trigger Location of Runtime Error
    Program                                 RHALEHRMDORIGINIT
    Module Name                             SYSTEM-EXIT
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
    1 EVENT        RHALEHRMDORIGINIT                   ???                                     0
      SYSTEM-EXIT

Distribute cost center data change pointer

HI
I need to distribute cost center data through change pointers
Can anyone please tell me the steps i need to follow
please dont give links, but would be helpful if some1 can tell me step by step
and how to do testing, ie which tables i need to check to see whether my change pointers are working or not.
Thanks in advance
Regards
Manu

Hi manu,
1) Goto transaction BD61 check if the checkbox is checked
2) Goto SM30 table V_TBDA2 click maintain enter message type and check the checkbox
3) Goto transaction BD52 enter Cost center message type
(COSTCENTER_CHANGEMULTIPLE/COSTCENTER_CREATEMULTIPLE/ any custom one) which you are using and create an entry object CMDT_CC table CMDTCC_ALL field * (all fields/ list of fields you want) .
Change pointers are created you can use this for distribution of IDocs
Regards
Hussain

Extracting cost center data from two tables

Hi Everyone,
I'm trying to extract cost center data from two different tables in SAP and pull it into one InfoObject. I'm using 0costcenter and it's already extracting data from one of the tables I need. Could someone explain how to add the second table? Thank you.

You can create a Generic Extractor , Create a view on 2 tables with proper join condition n use this to load 0COSTCENTER.

Cost Center Data in Company Code Currency

Hi All,
We have a requirement to develop a Cost Center Report with Company Code, Account Number and Amount in Company Code Curreny.
I have checked table COEP, we can get data of CCode, Account Number. But Amount will be in Object Currency/Transaction Currency / COArea Curreny and not in Company Code Currency.
Is there a way to get Cost Center data in Company Code curreny.
Please advice.
Thanks
Satish

Hi,
   In CO, you specify in the year-dependent settings for the controlling area (Transaction OKKP) whether you want to use one or more currencies (flag "All currencies", TKA00-ALLEW).
If you decided to use one currency only, all documents are only managed in CO area currency.
If you decided to use several currencies, the following three currencies are managed in CO:
    1. Controlling area currency
       The controlling area currency can be:
       - 10 company code currency (only if all company codes assigned to CO area have the same currency)
       - 20 free controlling area currency
       - 30 group currency
    2. Object currency (defined per object)
As a rule, the object currency is the company code currency. Only in one case the object currency can be freely chosen, that is, if flag "different company code currencies allowed" is not active. This flag is set automatically if CO area currency is not 10 and cross-company code accounting is set.
    3. Transaction currency (could be different in every posting).
regards
Waman

Home Cost Center Data Source

Looking for a home cost center data source. The Ideas forum claims it exists, but I cannot find it.
If it exists what is the data source called?
Would like to report based on employee's home cost center and reports they have in process or completed.
Thanks for the info, Britt

Steffen, I do not see it in that data source. Is there a trick to exposing it?
Attached are the fields I see in that data source.

Controlling Area and Responsible cost center

Hi,
is it possible to find out "Controlling Area" and "Responsible cost center"to SAP USER
Friendly regards
Alexander

I finf out :
DB Table -> CSKS

New FI GL vs Cost Center Data

Hi Gurus,
I am using 0FIGL_C10 and 0FI_GL_10 extractor for my P&L report. In New gl the extractor pulls glaccounts, profit center and cost centers into the cube. Now when i create a P&L report on figl cube and drill down by cost center and compare the same cost center and gl account in 0CCA_C11 cube i see different values?
my question is the cost center based P&L information i get in 0FIGL_C10 is it different from 0CCA_C11?
Can someone explain me the fundas??
Would be great help
Surya

Thanks for you reply. But i have to give a valid reason to my client. I understand that its Financial Accounting and Cost Center accounting but following are my questions
1) what is the purpose of having cost center information in FIGL cube/extractor? when i specifically look of a single expense account and for single cost center its different values in FIGL cube and CCA_C11 cube?
can you please explain functionally the different
for example GL account 600000 for Cost center C7000 has 100000 value in FIGL_C10 (FI_GL_10, FAGLFLEXT Table)
for the same account and same cost center the value is 569000 in CCA_C11 cube.
Since i have to explain my client that they should create reports on cost center cube if they want to see expense values can you explain the functionality difference
would be great help
Surya

Uploading of cost center data with additional fields

Hi Gurus,
I have uploaded the cost center data. now my client has given same data with additional fields data(ORT01, ORT02, TXJCD). first time I have uploaded with LSMW IDOC methos COSMAS1. but in the same idoc the extra field not available. So i have tried recording method for KS02 to upload the data. but the data is not changed. in the sence the additional fields data not loading. while uploading i getting the probelm at TXJCD. it is getting a popup window. i was not able to handle that. Is there any other Basic IDOC to upload the data with all the fields in cost center. BAPI or Direct input program? Thanks in advance

hi,
you can avoid the popup screen by using OK code.
~linganna.

BAPI_GLX_GETDOCITEMS and no Cost Center Data

Similar Messages

Maybe you are looking for