BAPI_GOODSMVT_CREATE Not working for Multiple materials
Hi,
I am using BAPI_GOODSMVT_CREATE to post materials (same as t-code MB1A).
I am populating Serial no for the materials having serialized profile it works fine if there is only one serialized profile material in the MRS.
But if there is two materials having serialized profile and I populate serial no for both the material then both the materials go into error.
will the BAPI work only for one material having serialized profile ??
If we can post more then one material with serialized profile then How ?
Regards
Bikas
what error you are getting..? and are you able to post them separately .
Similar Messages
-
EXIT_SAPLV50E_001 User Exit is not working for multiple plants case
Hi,
I have to update foreign trade data in Invoice during invoice creation using VF11. For that, I have written code in EXIT_SAPLV50E_001 and updated segal value. This functionality is working fine, if I have a single plant in an invoice. But customer has scenario where they can have multipl plants in an invoice.
For multiple plants in an invoice, this EXIT_SAPLV50E_001 is not called.
I am unable to find another better place where in I could place my code. Please help. Remember, case in multiple plants.
Will be rewarded.
Regards
ArpitHi Arpit,
Please use below mentioned user exit in T-code VF11
he following user exits are available for tcode VF11
Exit Name Description
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
J_3RSINV Customer enhancement: Pricing
or You can use BADI
BADI_SD_SALES_BASIC
BADI_SD_TO_FM
BADI_SD_BILLING
Regards,
Thangam.P -
Calculation formula userexit not working for multiple condition types
Hi,
we have a problem in the CRM ISA-B2B scenario where the custom user exit is only working for single condition type.
but we need it for multiple condition types .
the value of the subtotal is not being retrieved for multiple conditions. at a time only one condition value is being retrieved and shown in the webshop - shopping basket.
for ex:
we have scenario 1 where Y001 -Freight condition type is applicable for one customer.and Y002 is applicable for another customer.
when we are trying to show the subtotal condition value in the webshop by using a single custom user exit in the pricing procedure it is only working for either of the above 2 customers depending on the VMC cache status.
is there any problem if use the single user exit for both condition types?
and if it needs to be differentiated how exactly we can do that with the same logic in the java class.
Thanks in advance,
PSR.Hi Arshi,
below is the code:
public class ZValFormula_ZZWI1 extends ValueFormulaAdapter {
private static String zzwi = "ZZWI1";
private static char zzwiC = '@';
private static UserexitLogger userexitlogger = new UserexitLogger(
ZValFormula_ZZWI1.class);
public BigDecimal overwriteConditionValue(IPricingItemUserExit item,
IPricingConditionUserExit condition) {
ICurrencyValue val = condition.getConditionValue();
userexitlogger.writeLogDebug( "value saved for " + zzwi + " (" + zzwiC + ") = "
+ val.getValueAsString());
item.setSubtotal( zzwiC, val.getValue());
return val.getValue();
hope this would give more idea to look at the problem.
Thanks,
PSR -
Automatic MRP could not work for several materials
Dear Expert,
I have problem here in running MRP. Some of the materials were not automatically running MRP. While when I tried to run it manually using MD01 it works.
May be u can give me some idea why? When I tried to check the setting, i found in the table all the materials with complete status KCVDLSBGZXA are not automatically running MRP.
Is it because of that complete status setting? if yes where could i found that setting ?
Thanks
PaulinePaulin,
MRP relevant changes can be new procrument proposel, changes done in MRP view of material, changes in qunatity for re-order planning relevant materials etc.
MRP will not done untill and unless you have entry of materials in planning files.
i am not agree with you on the point that auto MRP is running for the material for which there is no planning file entry.
another things is please , provide details of material master like MRP type etc for the material for which planning file entry is there but MRP is not considering it.
another question is , what result you are expecting after MRP run ....? i mean how you come to a conclusion that MRP is not run for few of the materils but its done sucessfully for other materials ......?
please check it again and reply.
Regards -
3.4: keyword auto-completion not working for multiple levels
Auto-completion does not work with higher level keywords, which used to work in LR 3.3 (IIRC).
Example:
I enter in the "Click here to add keywords" field:
"He" then LR tries to complete the keyword by showing keywords starting with "He". Fine.
But this is a keyword which does not exist so far, so I enter "Heldenplatz > W" because I want to have sorted it under Wien. If I'm not mistaken, LR 3.3 showed after entering the "W" a list of existing keywords starting with W (auto-completion for the one level higher tag). This is not the case anymore. I have to enter "Heldenplatz > Wien" completely, which makes it slow and error-prone.
Am I mistaken or can you reproduce it?
CheersGaryRowe wrote:
How can it be, after all this time, that they still do not have effective regression testing in place ? Any sane development team (who wants to remain sane ;-) builds this as a priority ... unless they aren't given the resources?
I think (don't remember though) that this never worked, so regression testing would not have helped.
What is really to worry, that features aren't consequently and completely implemented (and tested). With a new option in Lightroom 3, Adobe has offered support for keywords with spaces. It seems that this feature as neither been thoroughly analysed or implemented. Thus, we face the currently inconsequent support of it:
keyword completion only works with the first entered word, but when you enter a complete keyword hierarchy using the ">" letters
filtering seems to have problems too -
HT2486 Smart Group not working for Multiple 'Not a Member of' Options
I am trying to go through my contacts and assign everyone to a group. I want to create a smart group whose criteria is "not in Group 1" AND 'Not in Group 2'.
This does not work. It simply gives me all the contacts.
Also, is there anyone to see a contact and know to which groups they belong. When I can't remember who someone is, it is helpful if I know what group.I have a different conclusion : for me, it works since 10.9 where it has never worked before (and I just checked it still works with 10.9.1) !
I did not modified my groups, they simply started to work properly with 10.9. -
ECR/ECO Workflow not working for multiple Objects
Hello all,
We have implemented ECR/ECO workflow by customizing the SAP standard one. We are facing a problem when entering multiple ECO objects such as mutiple Documents, materials, BOMs etc. When we create the ECR, two parralel workflow start (one for ECM and other for ECO) and depending on how many ECO objects we have included, multiple instances of ECO workflows will trigger (I think this is the standard behaviour as well but not sure)
In our workflow, we have a wait step in ECO workflow that waits until ECM has been converted into ECO (ECOP status) and starts the ECO workflow. Also, we have created a Wait step in ECM workflow and that waits until the ECO workflows have reached the CONFIRMATED Step when the processing of the objects are finished.
When we enter one object, both workflows start and ECO waits until ECM has been converted into ECO and then start the processing the Objects. when the ECO workflow is done (Status confirmated), it switches back to ECM workflow and then goes on with Close/Release steps of the Objects/ECO etc.
But, when we have multiple ECO objects, both start well as ECR converts to ECO and the ECO starts and then work items are processed but then stops just before the CONRIMATED steps even though all objects are changed/maintained properly and ECO workflows are completed. As a result, the control doesn't refer back to ECM and we never get the ECO close and Release step work items.
I have checked SWETYPV, SWEL, business objects ECM and ECO but nothing gives a result..
Any help would be appreciated..
ThanksCan you please update on what is the status in the workflow log. You can check this from SWIA tcode.
If it is in process step please check for ST22 dump if any.
Thanks
Arghadip -
LookUpSet is Not working for multiple columns in SSRS 2008 R2
Hi Friends,
I have a problem when i use more than one LookUpSet in SSRS to display more than one value based on Day Number & other fields..Please find the below details and please suggest me a solution for this.
Crystal :
Day1 Day2
Period 4 Arts,Maths Arts,Maths
For this in SSRS i am using LookUpSet as below based on StaffID,PeriodNumber & DayNumber like this:
= (IIF(Fields!DayNumber.Value=1,Join(LookupSet(Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!ClassCode.Value
, "TIMSTF5"), "," ),""))
which is displaying correct in SSRS,But when i use the same expression to display Day 2 classes it is returning empty even though i have values on Day 2.Please have a look at the SSRS output below:
Day1 Day2
Period 4 Arts,Maths
Day 2 Expression is :
= (IIF(Fields!DayNumber.Value=2,Join(LookupSet(Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!ClassCode.Value
, "TIMSTF5"), "," ),""))
I am not sure why it is not liking to use more than LookUpSet in the same report,Please suggest me with a work around for this.
Thanks in advance,
Sam.Hi Guys,
I have sorted out the problem.Solution for the above problem is use Max before the expression like below, since it has multiple days and periods in the Dataset.
= Max((IIF(Fields!DayNumber.Value=2,Join(LookupSet(Fields!StaffID.Value & Fields!PeriodNumber.Value & ields!DayNumber.Value
, Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!ClassCode.Value
, "TIMSTF5"), "," + vbcrlf),"")))
Thanks,
Sam -
Workflow not working for multiple line items
Hi gurus,
we are working on ECN/ECO workflow.
Once ECN is created in CC01, our workflow triggers.
we are calling subflow from main WF for enhancing the materials of the Engineering change number(ECN).
Subflow will take the material to different departments for enhancing the views like,
Purchasing views by purchasing dept,
quality views by quality dept,
sales views by sales dept,
etc.
This whole process is working fine, if there is single material number in ECN.
But, if there are 2 material numbers, the control is not returning back to MAIN WF from Subflow.
do we need any config/setup to make it work. (we are using block while calling subflow).
Any help will be of gr8 use.
rgrds.
santosh.Can you please update on what is the status in the workflow log. You can check this from SWIA tcode.
If it is in process step please check for ST22 dump if any.
Thanks
Arghadip -
BAPI_SALESORDER_CREATEFROMDAT2 - not working for multiple BOM
Hi -
I am using BAPI_SALESORDER_CREATEFROMDAT2 function module to create sales order with multiple material. If more than one BOM materials are passed to the FM,this FM is giving error and not creating sales order. I have to pass multiple BOM to the FM and it should create sales order and expand the BOM to its components also.
Can anybody help on this.
An example will be good.
thanks
pls help
Edited by: sanchari g on May 13, 2009 11:05 AMHi Sanchari,
Try the following logic:
LOOP AT it_salesheader INTO wa_salesheader.
CLEAR wa_order_header_in.
CLEAR wa_order_header_inx.
CLEAR wa_order_partners.
CLEAR wa_bapicond.
CLEAR wa_bapicondx.
REFRESH it_order_items_in.
REFRESH it_order_items_inx.
REFRESH it_order_partners.
REFRESH it_order_schedules_in.
REFRESH it_order_schedules_inx.
REFRESH it_bapicond.
REFRESH it_bapicondx.
wa_order_header_in-doc_type = wa_salesheader-auart.
wa_order_header_in-sales_org = wa_salesheader-vkorg.
wa_order_header_in-distr_chan = wa_salesheader-vtweg.
wa_order_header_in-division = '00'.
wa_order_header_in-purch_no_c = wa_salesheader-bstnk.
wa_order_header_in-purch_date = wa_salesheader-bstdk.
wa_order_header_in-ref_1 = wa_salesheader-vbeln.
wa_order_header_in-price_date = wa_salesheader-prsdt.
LOOP AT it_salesitem INTO wa_salesitem WHERE vbeln = wa_salesheader-vbeln.
wa_order_items_in-itm_number = posnr_temp.
wa_order_items_in-material = wa_salesitem-matnr.
wa_order_items_in-plant = wa_salesitem-werks.
wa_order_items_in-target_qty = wa_salesitem-kwmeng.
wa_order_items_in-ref_doc = wa_salesitem-vbeln.
wa_order_items_in-ref_doc_it = wa_salesitem-posnr.
wa_order_items_in-ref_1_s = wa_salesitem-vbeln1.
wa_order_items_in-poitm_no_s = wa_salesitem-posnn.
APPEND wa_order_items_in TO it_order_items_in.
ENDLOOP. "loop for line item which contains all BOMs.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = wa_order_header_in
order_header_inx = wa_order_header_inx
testrun = testrun
IMPORTING
salesdocument = v_salesdocument
TABLES
return = it_return
order_items_in = it_order_items_in
order_items_inx = it_order_items_inx
order_partners = it_order_partners
order_schedules_in = it_order_schedules_in
order_schedules_inx = it_order_schedules_inx
order_conditions_in = it_bapicond.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDLOOP. "loop for the header data.
Hope it helps.
Regards,
Arnab. -
Variable Substitution not working for multiple files
Hi,
Have a scenario in which we are using Interface Collection with multiple files as output.
The naming of the files is derived from a payload field as follows.
payload:MT_OrdersAck,1,Order,1,File_Header,1,StoreNo,1
When the first file is generated this works fine, but fails for the rest of the files.
I guess this is because of the hardcoding 1 in
payload:MT_OrdersAck,1,Order,1,File_Header,1,StoreNo,1
how do we get around this problem?
Any Ideas?Hi, I suppose you are using Mapping-Based Message Split, right? Do the following files look the same like the first file with respect to File_Header?
Make sure that the payload structure (payload:MT_OrdersAck,1,Order,1,File_Header,1,StoreNo,1) is equal in all files and that first occurrence of StoreNo always has a value in all the files.
Regards, Martin -
Firefox 5.0 not Working for Multiple Users Sharing the Laptop
Hello All,
I upgraded Firefox from 3.15 to 5.0 using my user ID (admin) in Vista Business SP1. The same copy of Firefox 3.15 also used to work fine under my son's user id. The new install of 5.0 works fine under my user id but immediately freezes under my son's id. I reinstalled 5.0 in the same location under my son's user id but no change.
I can get Firefox 5.0 to work under my son's login by running it as administrator but then only my bookmarks, etc. load. None of his profile or bookmarks are present.
Any ideas on how to fix this?
Thanks...
NeilGoogle needs to update the Google Toolbar program for Firefox 5.0.
The Google Toolbar '''7.1.20110512W''' version does work pretty good in Firefox 5.0 by using the Compatibility Reporter extension. But not every feature works 100%.<br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html
Google Labs has been working on a GTB 8 version, but it looks like it isn't made for Firefox - just for Internet Explorer. <br />
http://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588#toolbar_info <br />
So, maybe Google isn't going to be supporting Firefox any longer. That might be a move to force Google Toolbar users over to Google Chrome, which I believe has all those features built-in. -
Bdc session is not working for multiple records
Hello Experts
we have written abdc for f-27 using the session method.it is working fine for one record but if we supply mulite records it
is giving the error, like bseg-wbter( ie amount which comes in the second screen) is not found in screen 1.
ie the first screen.The bdc is working fine for one record in notepad.after completing the first record it goes to
second record and in the first screen itself it says amount field not found in screen 1. But
actually this field comes in second screen.
my flat file is like this..
10.10.2008 DA 9641 10.10.2008 1 IND TEST 31 10001 320.21 10.10.2008 01 120021 345.94
10.10.2008 DA 9641 10.10.2008 1 IND TEST 31 10001 560.22 10.10.2008 01 120021 231.94please kindly see my program..
LOOP AT itab.
REFRESH itabbdc.
PERFORM bdc_dynpro USING 'SAPMF05A' '0100' 'X'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RF05A-NEWKO'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'BKPF-BLDAT' itab-bldat.
PERFORM bdc_field USING 'BKPF-BLART' itab-blart.
PERFORM bdc_field USING 'BKPF-BUKRS' itab-bukrs.
PERFORM bdc_field USING 'BKPF-BUDAT' itab-budat.
PERFORM bdc_field USING 'BKPF-MONAT' itab-monat.
PERFORM bdc_field USING 'BKPF-WAERS' litab-waers.
PERFORM bdc_field USING 'BKPF-XBLNR' itab-xblnr.
PERFORM bdc_field USING 'FS006-DOCID' itab-docid.
PERFORM bdc_field USING 'RF05A-NEWBS' itab-newbs.
PERFORM bdc_field USING 'RF05A-NEWKO' itab-newko.
PERFORM bdc_dynpro USING 'SAPMF05A' '0302' 'X'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RF05A-NEWKO'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'BSEG-WRBTR' itab-wrbtr.
PERFORM bdc_field USING 'BSEG-ZFBDT' itab-zfbdt.
PERFORM bdc_field USING 'RF05A-NEWBS' itab-newbs2.
PERFORM bdc_field USING 'RF05A-NEWKO' itab-newko2.
PERFORM bdc_dynpro USING 'SAPMF05A' '0301' 'X'.
PERFORM bdc_field USING 'BDC_CURSOR' 'BSEG-WRBTR'.
PERFORM bdc_field USING 'BDC_OKCODE' '=BU'.
PERFORM bdc_field USING 'BSEG-WRBTR' itab-wrbtr2.
PERFORM bdc_load USING 'F-27' itabbdc.
ENDLOOP.
*& Form open_session
text
--> p1 text
<-- p2 text
FORM session_start .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = 'F-27DA'
keep = 'X'
user = sy-uname.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "session_start
FORM bdc_load USING tcode TYPE sytcode
bdcdata LIKE itabbdc.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = tcode
TABLES
dynprotab = itabbdc.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
Search spec not working for Multiple Business Object in Siebel
Hi,
In Siebel Applicaiton Specified Search spec in Administration - BI Reports->Standard Templates-> integtion Object. the Specified Search spec is not returning particular record. It's seems returning all records. below we are using search spec as [Row Id] = [Quote.BillingaccountId].
for testing purpose specified how code value : [Row Id]='1-wXR8'(some BillingaccountId in our application from Quote Object).
Does anybody worked on Searchspec for MultipleBusienssObjects and is the search spec syntax is correct.
Thanks
-ChakriHi Ravi..
thanks for replay. with SR you provided getting no search results. If you have already can you please email me at [email protected]
And also mention format as IO1.Field1=IO2.Field2. Need to give IO.fieldname i.e Integration Object Name .Field name or IC.Fieldname.. Can you please correct.
Thanks
-Chakri -
ADI not working for multiple records
Hi,
We currently have an issue with ADI. The ADI we have produces an MS Word letter based on a custom view and custom integrator.
On the person form, when I query for an employee and the resultset is 1 our ADI is working fine and the letter/word document is generated.
When the query returns more than one employee, the Web ADI errors. It does not download any records into the excel file and then when it tries to open the word document it asks for Header Record Delimiters?
In the excel document I get a Run-Time error '5922' Method 'Run' of object '_Application' failed.
Is there a setting that only restricts ADI to return one row from this form?
Any help would be greatly appreciated.
Many thanks
MartinHi,
We currently have an issue with ADI. The ADI we have produces an MS Word letter based on a custom view and custom integrator.
On the person form, when I query for an employee and the resultset is 1 our ADI is working fine and the letter/word document is generated.
When the query returns more than one employee, the Web ADI errors. It does not download any records into the excel file and then when it tries to open the word document it asks for Header Record Delimiters?
In the excel document I get a Run-Time error '5922' Method 'Run' of object '_Application' failed.
Is there a setting that only restricts ADI to return one row from this form?
Any help would be greatly appreciated.
Many thanks
Martin
Maybe you are looking for
-
Relative Path for Attach menu forms or icon file
How should i able to provide relative path while attaching Forms,menu or icon files in the Form application. So that it can be easily portable Thanx in advance Upendra
-
MacBook Pro battery ran low and computer shut down , after charging battery I tried to start up and I got an Apple on a gray screen with spinning wheel that went to a panic call out screen and that's as far as it will go. I've tried start up with com
-
Hi, I need some clarification on the below issue. User generated a payment run (APP) for a Vendor invoice however the bank confirmed due to technical error in their side the payment was not generated successfully,so the user has reversed the payment
-
Embedding Flash with a holding page to start
I have an embedded .flv file on my webpage with a controllable skin. This is not started automatically. I want to add a holding image on the flash player to be displayed when the page opens and then when the user chooses to play the video they then v
-
does anyone know the website where i can sign the service agreement for iphone 4? i just called apple and they said its a hold on my account until i can get it signed the guy was giving me the address but he was talking to fast even after i asked him