BAPI_GOODSMVT_CREATE Problem with movement 161

Hi Gurus,
I have a problem with BAPI_GOODSMVT_CREATE and movement type 161. We used to put 161 as the movement type when referencing a PO with "Returns Item" marked. Movement was properly posted. But now I am facing the following issue, when trying to post 161 I have the message "No goods receipt possible for purchase order 4200000084 ...", If I use movement type 101 system will assume 161 and everything is OK, but I don't understand why I could use 161 before and now I can´t, this is happening with all my POs with "Returns Item" marked.
I understand that I can just use 101, the problem is that this will require a change in a non-SAP system... that is why we prefer still using 161.
Any help will be highly appreciatted.
Thanks!

Hi,
Check this link;
Re: BAPI_GOODSMVT_CREATE for movement type 161
Regards

Similar Messages

Problem with movies imported from iPad3

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

I have a Macbook OSX Version 10.6.8 and I have problem with Movie application 7.1.4 (585) when I try to open it a statement said "MIssing Quicktime Components, re install from Movie Installer" my operation system is snow leopard. Help please!

I have problem with the Movie application 7.1.4 (585) when I try to open it a statement indicate that there are some "MIssing Quicktime components, re-intall from movie installer" . How can I fix thi problem. Please help.

Acrobat Support

Video problem with movies that previously played okay

I transfer movies on and off my Touch to open up space. I previously copied a dvd using toast Titanium 8 to my touch which played fine. I then deleted it to make space. When I tried to transfer the movie back to the Touch a few days later it wouldn't copy, giving me the message "the video is not the right format..." etc.
Why would it copy over one time and not another.
Any help would be appreciated. I seem to find this to be a recurring problem with some files, even though they have been converted to iPod compatible files with Toast, which are the .mp4 variety. Same thing has happened occasionaly with iSquint.
Cheers
mrjazz

Probably because the iTunes file has an embedded Digital Rights Management certificate which prevents unauthorised publishing of copyright music to web sites such as Youtube.

Problem with move tool? (Win 7)

On Photoshop CS4 , everytime I select the move tool and decide to move an object among a layer , it moves the object off screen , making it difficult to bring it back to the canvas to move . I know it isn't jumping layers , because only the object inside of one layer i moved , but ... am I the only one that has this problem ? How do I fix it ?
It doesn't only have this problem with the move tool , but with the text tool , marquee tools , and the brush tool , as well . The text tool would jump off screen , the marquee tool would position the marquee somewhere other than where I clicked it to be , and the brush tool would sometimes jump out of the brush outline . Can someone help ?

Standard questions:
Have you updated to version 11.0.1?
Have you updated your video drivers?
Is you video card compatible? See http://www.adobe.com/go/kb405711
Have you tried turning off OpenGL in preferences?
If the answer to all is yes, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

XDCAM-EX problem with .MOV files on Premiere CS6

Hello!
I've been working in a video project on Premiere CS5 with video files .MOV from a JVC camera and from a Sony XDCAM EX. I've installed the Premiere CS6 TRIAL. The project has been converted: I get to watch and edit the .MOV files from the JVC Cam, BUT I can't load the media .MOV from XDCAM EX, It says the codec is missing or unavailable... I got the same problem with some .DV files working before on CS5...
I looked for the codec info and I found this one: MediaCoreQTCodecRulesCS6.xml
It shouldn't be working?
Why if all the files were working with Premiere CS5, They are not with Premiere CS6, being this one the latest version of the software? Is it due to be a trial version of the software?
I would really appreciate your help on this issue!
Have a good day!
Zoila

Officially you need FCP installed to work with XDCAM EX Movs. Are you on a mac or PC?
However, this is an update for quicktime on macs that gives you the XDCAM EX codec:
http://support.apple.com/kb/DL1396
Not sure if there's an equivalent for PCs.

Photoshop CS5 - Image resize problem with move tool

Hi People
Here's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I didn't have this problem with CS4 and I've only recently upgraded. I work around this problem by using the proper Free Transform tool (ctrl+t) but it would be nice to know why the hell this happens. It seems to me to be more of a graphical glitch than a software preference but I thought I'd check just-in-case.
Specs:
Photoshop CS5 V12.1 x64
PC
Intel Xeon W3505 @2.53GHz
Nvidia Quadro FX580
12 GB RAM

ace591 wrote:
Hi People
Here's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I also read you you tried updating your video dirvers and your syste crashed and you had to roll back. Make sure you have downloaded the latest correct drivers. If that does not work try turning off Open GL in photoshops preferences.
On my old XP 32 bit system CS5 movet tool with transform dialog does not fail like on your system. I can move the handles time and time again without commiting the transform. The only way to have Photoshop revert the transform back to the original state is to press the ESC key to cancel the uncommitted transform.

Problems with .mov file

Hello All
I need some help. Let me explain from the beginning. I recored some footage on HDV - transfered to my Macbook Pro and have no problem with that. Can open with QT and edit with FCP. I need to send part of the RAW footage to a friend of mine and he has only a PC with XP on it.
I use XP with bootcamp on my MBP. When I try to open the raw footage on my XP with QT it wont open - all I see is a white screen with no video on it.
What it happening and what should I do ? I need to open the .mov file and can not convert it another format because I am talking about 100gb on video, maybe more and its on several files.
Please, any help will be appreciated

The HDV codec will only play back on Macs with FCP installed. Even if you have another Mac, if FCP is not installed on it, that mac won't see the HDV .mov. The HDV codec that is used only comes with FCP.
You cannot capture HDV on FCP for use on another editing system. If your friend with the PC needs to edit that footage, you will have to give them the tape.
Shane

Problem with .MOV

Hi everyone,
I'm having an issue with .mov files in After Effects. Here is my system:
Windows 7 64 bits
Sabertooth X58
Intel i7 920 @2.67GHz
Nvidia GTX 640
12 GB Corsair DDR3
Adobe CS6
The problem: Some .MOV files I play in After Effect look corrupted:
When I play them, it they make my computer bug until it freezes or shows a Bluescreen. But the files aren't corrupted as they play without problem on VLC (independant from Quicktime). The problem also happens in Premiere and even Quicktime (Quicktime version: 7.7.4 (1680.86)). I can work without problem with some .MOV so I checked the codec of the different files. "Apple PNG" and "Apple Photo JPEG" are making my system crashing. But I can play, work with or export "avc1" without any trouble.
The other day I actually noticed a similar problem in Nuke. I worked with another .mov file (avc1) without any issue but once I tried to render it to a .MOV file (Apple PNG), the rendered files had the same kind of corrupted-looking (lines and sometimes green screen). When I export it in a normal png-sequence there was no problem.
Already tried but didn't solve:
- updating to last graphic drivers
- reinstall Quicktime
- reinstall an older version of Quicktime
- updating DirectX (I already had last version)
- try with or without CUDA in After Effects
- try to load the .mov from another harddisk
- set Quicktime to "Safe mode (gdi)" (doesn't help for After Effects)
- try to convert the file to a png sequence in Quicktime (crashed after rendering a few frames)
Has anyone an idea?
Thanks in advance!
Sakat
#update 1:
- Tried to convert a ".mp4" file to an ".mov Apple PNG". Then I convert it again to a ".mp4" with Wondershare Video Converter (the errors do not happen with that software). I can be play without problem on VLC that last ".mp4".
- Tried to play an ".avi" file in Quicktime: system crash.
- Tried to preview an ".mov Apple PNG" in half resolution in AE: system crash.
- Tried to export a ".mov Apple PNG" to an ".AVI" and an ".mp4 H264": It exported but the files aren't playable in any soft (including VLC and Wondershare Video Converter). I did the same process to a ".mov Apple PNG", it freeze Windows.
Message was edited by: Sakat

Today I tried to uninstall all Apple softwares, clean the register with CCleaner, delete Apple folders in Appdata (local, locallow, roaming), Flash the bios of my motherboard, reboot and then only reinstall the last version of Quicktime. And I tested all the advanced settings in Quicktime: safe mode (GDI), Directdraw acceleration, Direct3D acceleration. No result... I could play a "avc1 .mov" in Quicktime. That's all.
Last month I formated and reinstalled Windows. Before formatting I had no problem with these files. I didn't change anything in the hardware. So there must be something missing/corrupt in some codecs used by Quicktime or the way Quicktime renders these codecs.
I searched but couldn't get any result for a link to download a Windows version of ApplePNG codec...
Is there anyone who has an idea because I'm really getting stuck..

Data loading problem with Movement types

Hi Friends,
I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
Problem is Movement Types for some documents missing.
But i checked in rsa3 that time showing correctly.
i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
please give me solution for this how to loading the data with movement types.
i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
Thanks & Regards,
Guna.
Edited by: gunasekhar raya on May 8, 2008 9:40 AM

Hi,
we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
this field populated with data all the ACC. Doc . number.
Only 50000295 to 50000615 in this range we are not getting the movement types values.
we didn't write any routines in transfer and update rules level.
just we mapped to BWART field 0MOVETYPE info object.
we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
Please give mesolution for this. i need to solve this very urgently.
i am witing for your reply.
Thanks,
Guna.

Problems with mov. files

I have a JVC Everio camcorder. I have been messing with it for weeks now with little luck. When you save files it is a moi. or mov. file.
The only program i want to watch the vidoes on is Quicktime. I am recording sports videos and want to use the scroll bar so i can look for errors in technique.
I have downloaded dozens of fixes and none of them work.
I can watch the clips in any viewer except quicktime. I have used power director, VLC Player, Windows Media Player, power cinema, and nero but none of them do what i want them to.
I can change the file name. I have changed the name to avi, mpeg, mpg, and everytime i try to open it in quicktime i get the message (quictime will not open it because it is not a file quicktime understands) well what does it understand? I bought quicktime pro because that was supposed to work well it doesnt.
Please help

I am also having problems playing .mov files. My problem is that I just bought a Canon camera that shoots 720p video and when I save it to my computer and try to open it in quicktime, it plays but the picture hangs up. I have a Dell monitor that plays HD videos that i've downloaded from the internet all the time. The sound is fine but the picture lags and nothing i've tried seems to work. I have quicktime 7.6 and I want to know what I can get to make my computer play 720p files.Can you help please?

Problems with movie clips in time line-program keeps quiting

Not sure if I love this new iMovie version. I have imported many clips with my Sony Digital Hi 8. No problem with past versions. Everything went good until trying to put the clips into the time line. Everytime I try working with the time line and the imported movie clips the program quits...every time. Is this normal. Its getting pretty frusterating.
Thanks for any help.
Shane

I feel your pain in that the same things are happening to us. My wife is trying to edit many video clips imported from a Panasonic PV - GS39. iMovie crashes constantly when trying to work with this particular project. I have successfully edited a project that consisted of mainly still pics with only a few short video clips thrown in. I've tried many of the suggestions from this discussion group (QT plugs, trashing prefs, etc...) with no success. I'll keep trying for a solution though.

Sound problems with movie

I just purchased the movie "Overboard" in HD. The movie video plays ok, but the sound keeps going in and out.
I don't understand why this is happening. My music plays ok and I'm not having any other sound problems with my
computer. I am running Itunes on a Windows 8.1 desktop computer (Gateway).
I couldn't figure out how to re-download it or repair it.
If anyone can help, I'd appreciate it!
Thanks!

Hi Larry James,
If you are having video playback issues in iTunes on your Windows machine, you may find the following articles helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
- Brenden

HT1390 Report problem with movie rental

I rented the movie "Hunger Games". After the download had completely finished I wanted to watch the movie in iTunes and had trouble, the sound was on and off, the picture sometimes blurry and interrupted.
How can I report a problem in movie rentals?

Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Problem with move of iTunes music to external hard drive

My hard drive was getting full and I bought a new external drive and moved iTunes to it carefully following directions on ilounge and Apple support.
1. I first hit consolidate library and only moved the iTunes music file (as per the iLounge directions), then went to Preferences and changed the location of the music file to the external drive.
2. Itunes did not find the paths on the external drive.
3. I then tried to follow the Apple directions and here is when this went wrong. By hitting create new folder and consolidate music again, the whole music folder copied again to the eHD resulting in 10k duplicates.
4. However, this time the songs all worked, so now I had a duplicate problem. By checking these discussions I found an easy way to get rid of the duplicates by sorting by Date (meaning move date- the second time I copied the music file the move dates in all the songs was yesterday, and this was the link where all the songs worked.
5. I thought all was well after checking the music played and even testing remote on my phone, turning off the computer, restarting and confirming iTunes launched fine. Instead of following excellent advice many of you have posted on waiting a few days to check everything works before deleting the old music folder, as my internal HD was completely full I deleted it opening up 100GB of space.
6. Of course, I did not check everything- my playlists were all gone. The iTunes Library files are now both on the EHD and on the iHD but I cannot recreate the playlists. I suspect the playlists were all linked to the original music files copied the first time with the broken paths.
7. At this point is there any advice to recovering the playlists- I have them on an ipod and iphone. Worst case I will need to manually the Playlists.
8. Learning from my mistakes, NEVER, delete the original music folder till you are sure everythng works and even then wait a few days so you will have an opportunity to properly check everything.
9. Finally, I am at a loss to understand why the iLounge instructions did not work for me- only copying the music files to the eHD, leaving the Library files on the iHD, and changing Preferences to the new music file location.
thanks

kneedragger101 wrote:
Note this is an iTunes Library that was on a PC
you might want to read these articles: one and two.
why not move your media files using _*Home Sharing*_ ?

BAPI_GOODSMVT_CREATE Problem with movement 161

Similar Messages

Maybe you are looking for