BAPI_INSPECTIONPLAN_CREATE..issue
Hi Experts,
I am using BAPI , BAPI_INSPECTIONPLAN_CREATE..Its creating inspection plane..THe only issue is its creating below mentioned locks.
Lock mode Table name Lock Argument
E OPR_CLASS_LOCK 796Q51999002########00000157
E OPR_CLASS_LOCK 796Q51999002########00000158
S PLKO 796Q51999002##########
E SEQ_CLASS_LOCK 796Q5199900202000000
E TSK_CLASS_LOCK 796Q5199900202
I had tried FMS...DEQUEUE_ARRAY..but still not able to clear locks..
the lock object I am passing to above fm is ENQARRAY.
Please advise
Thanks in advance
Then how do you call that BAPI? Do you just load data from somewhere and then call that BAPI? If you are pretty sure that those records are not blocked by other transaction/application/FM then I would open OSS ticket and ask SAP why it does not release locks. You can also try to use FM DEQUEUE_ALL.
Cheers
Similar Messages
-
Issue with the BAPI_INSPECTIONPLAN_CREATE
Hi,
I am using the bapi BAPI_INSPECTIONPLAN_CREATE, to create inspection plans. But it is giving an error with the message " Vendor xxxxxxxx does not exist", where the vendor exist in the system. Please let me know why it is giving the error. I did lot of debugging, but I am not able to find the exact reason.
Thanks,
Deepak.Please post your code
Regards,
Ajay -
Issue with BAPI_INSPECTIONPLAN_CREATE (new)
Hi,
I'm trying to create inspection plan using BAPI_INSPECTIONPLAN_CREATE. I'm passing the following parameters for the tables in BAPI.
Profile = 0000001
1)Task.
I. change_no
II. task_measure_unit
III. lot_size_to
IV. plant
V. description
VI. task_list_status
VII. lot_size_from
VIII. valid_from
IX. planning_work_center
X. task_list_usage
2)MATERIALTASKALLOCATION
I. material
II. change_no
III. plant
IV. valid_from
3)operation
I. change_no
II. activity
III. control_key
IV. plant
V. operation_measure_unit
VI. denominator
VII. nominator
VIII. base_quantity
IX. description
X. valid_from
XI. work_cntr
XII. insp_point_complt_flow_variant
XIII. operation_id
4)INSPCHARACTERISTIC
I. activity
II. operation_id
III. change_no
IV. inspchar
V. pmstr_char
VI. pmethod
VII. smpl_unit
VIII. smpl_quant
IX. cha_master_import_modus
X. characteristic_name
XI. sampling_procedure_ind
XII. scope_ind
XIII. confirmation_category
XIV. change_documents_req
XV. print_ind
XVI. docu_requ
XVII. valid_from
XVIII. mstr_char
XIX. method
XX. char_descr
for quantitative char, i'm sending the below additional information
I. quantitative_ind
II. meas_value_confirm_ind
III. dec_places
IV. meas_unit
V. target_val
VI. up_tol_lmt
VII. lw_tol_lmt
VIII. smpl_procedure
IX. smpl_unit
X. smpl_quant
XI. target_val_check_ind
XII. up_tol_lmt_ind
XIII. lw_tol_lmt_ind
for qualitative char, i'm sending the below additional information
I. attribute_required_ind
II. sel_set1
III. psel_set1
IV. smpl_procedure
V. smpl_unit
Vi. smpl_quant
But I'm still getting the follwing errors.
BAPI 001
CP 458 You cannot enter an activity type for standard value Mach. Dep
CPCL 203 Consistency check not successful when creating operation
CQCL 008 Inspection characteristic cannot be uniquely assigned to one operation
CQCL 026 Data import mode N does not apply to a master inspection characteristic
Please help me... Let me know if i have to give any additional information
thanks in advance
Vishnu
Edited by: Vishnu080 on Jun 30, 2009 5:00 PMDear Vishnu
Please check this link. It might help you in the program and please check for other links in this forum for the same BAPI
Link: [https://wiki.sdn.sap.com/wiki/display/Snippets/ABAPProgramtouploadQMInspectionPlanUsingBAPI]
Regards
Gajesh -
Issue with BAPI_INSPECTIONPLAN_CREATE
Hi, I'm trying to create inspection plan using BAPI_INSPECTIONPLAN_CREATE. I'm passing the following parameters for the tables in BAPI.
Profile = 0000001 .
1)TASK table. I. change_no II. task_measure_unit III. lot_size_to IV. plant V. description VI. task_list_status VII. lot_size_from VIII. valid_from IX. planning_work_center X. task_list_usage
2)MATERIALTASKALLOCATION I. material II. change_no III. plant IV. valid_from
3)OPERATION table. I. change_no II. activity III. control_key IV. plant V. operation_measure_unit VI. denominator VII. nominator VIII. base_quantity IX. description X. valid_from XI. work_cntr XII. insp_point_complt_flow_variant XIII. operation_id
4)INSPCHARACTERISTIC table. I. activity II. operation_id III. change_no IV. inspchar V. pmstr_char VI. pmethod
VII. smpl_unit VIII. smpl_quant IX. cha_master_import_modus X. characteristic_name XI. sampling_procedure_ind
XII. scope_ind XIII. confirmation_category XIV. change_documents_req XV. print_ind XVI. docu_requ
XVII. valid_from XVIII. mstr_char XIX. method XX. char_descr.
For quantitative char, i'm sending the below additional information I. quantitative_ind II. meas_value_confirm_ind III. dec_places IV. meas_unit
V. target_val VI. up_tol_lmt VII. lw_tol_lmt VIII. smpl_procedure IX. smpl_unit X. smpl_quant XI. target_val_check_ind XII. up_tol_lmt_ind XIII. lw_tol_lmt_ind.
For qualitative char, i'm sending the below additional information I. attribute_required_ind II. sel_set1 III. psel_set1 IV. smpl_procedure
V. smpl_unit Vi. smpl_quant.
But I'm still getting the follwing errors.
BAPI 001 CP 458 You cannot enter an activity type for standard value Mach. Dep
CPCL 203 Consistency check not successful when creating operation
CQCL 008 Inspection characteristic cannot be uniquely assigned to one operation
CQCL 026 Data import mode N does not apply to a master inspection characteristic.
Please help me... Let me know if i have to give any additional information thanks in advance VishnuHi,
Please check the given link, hope It will help you.
BAPI_INSPECTIONPLAN_CREATE
Thanks & Regards,
Shamma
Edited by: Shamma Firdous on Jul 1, 2009 12:18 PM
Edited by: Shamma Firdous on Jul 1, 2009 12:19 PM -
Using the bapi BAPI_INSPECTIONPLAN_CREATE
Hi ,
I am using the bapi BAPI_INSPECTIONPLAN_CREATE to create inspection plans.
Here I am facing one issue, as a part of this creation in inspection characteristics, I am not able to
handle all the control indicators.
In this control indicators under Results confirmation block I dont see fields in the BAPI to handle
radiobuttons for 1. Required Char 2. Optional Char 3. After Accep. 4 After Rejection
If anybody is familiar with this BAPI, please help me.
Thanks,
RaviHi Neha,
Sorry to say this, It does not answers my question. I am having the program created by someone else. The issue is the program is not able to populate the control indicators as specified in the file. Because the programmer has not populated those values in the BAPI, even the program you had given is not having those fields. Also I am not able to find the correct fields to populate the values into the BAPI. If you know this specific thing please help me out.
Thanks,
Ravi.
Edited by: ravi itekala on Dec 4, 2008 1:51 PM -
Problems occured when using BAPI_INSPECTIONPLAN_CREATE
hi,guys!
please help!
problems occurred when using BAPI_INSPECTIONPLAN_CREATE to create inspection plans.
problems as belows:
This inspection point completion is not possible for task list type Q;
Consistency check not successful when creating operation;
Inspection characteristic cannot be uniquely assigned to one operation.Hi Alex,
There must be some data issue.
Just try to create the Inspection plan without BAPI i.e. using the transaction for the data you have and see whats happening.
Regards,
Atish -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani -
Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampathHi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath -
HP LaserJet Enterprise 600 M602 driver issue
Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
AnatolyI am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Windows 7 displays error message when exiting +cursor issue
Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Dougfunction(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel -
Issue in Creation of Periodicals for Contracts in CRM7.0
Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
DedeepyaHi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C -
Issue in creation of plant related data at receiving server using BD10
Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05 matmas05
E1MARAM Master material general data (MARA)
Z1KLART KLART----
My extention
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT)
E1MARCM Master material C segment (MARC)
Z1AUSPM E1AUSPMDistribution of Classification:----
My extention
E1MARC1 Additional Fields for E1MARCM
E1MARDM Master material warehouse/batch segment (MARD)
E1MFHMM Master material production resource/tool (MFHM)
E1MPGDM Master material product group
E1MPOPM Master material forecast parameter
E1MPRWM Master material forecast value
E1MVEGM Master material total consumption
E1MVEUM Master material unplanned consumption
E1MKALM Master material production version
E1MARMM Master material units of measure (MARM)
E1MBEWM Master material material valuation (MBEW)
E1MLGNM Master material material data per warehouse number (MLGN)
E1MVKEM Master material sales data (MVKE)
E1MLANM Master material tax classification (MLAN)
E1MTXHM Master material long text header
E1CUCFG CU: Configuration data
E1UPSLINK Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PMCREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ? -
Issue in Creation of new Value Field in CO-PA
Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
SafiThanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi -
Dear All
I have some is my current assignment-Customer is buying some material say "A" want "B,C" as exclusive free goods
is it possible to give two free at a time in same order ?
I only know one exlusive free good can be give to one material with combination of customer ( Customer/Material)
Looking for some inputs regarding the issue.
Can you plz suggest me if there is any possiblities for BOM?
Many Thanks
Rakesh NaveenDear Rakesh,
Be informed that free goods is not currently supported in combination with material structures (e.g. product selection,
bills of material, variants with BOM explosion), see note 796926.
Determination of free goods is performed in include FV45PF0N_NATRAB_SELECTION and the check is hardcoded. You will have to modify the program to get that functionality, but be carfull that any modification won't be supported by SAP, see note 170183.
I hope it can help you.
Ruy Castro
Maybe you are looking for
-
What are the things 10.6.8 update break?
After the 10.6.8 update I am having so many issues, first, the %100 cpu usage of dock, disabled parallels, and now it is ok, then, a reboot and I am unable to login, I enter my password, it begins the login process, then logs me out, if I persist, it
-
How to create a profile set for a campaign.
HI Friends, I am working on CRM 7.0. My requirement is to create a Batch program for campaign creation and automation. i have used the class 'cl_crm_mktpl_appl_base' to copy the existing campaign . It copied the entire target groups,campaign eleme
-
I keep my iTunes folder on my C drive on my old laptop but my iTunes Media folder is on my D drive (separate physical drive). I have purchased a new laptop with a single drive, (C drive) however, I can no longer access my old laptop's C drive to tran
-
Email activity in BPEL: Would the email body support span and div elements
Whenever the body of the html contains span or div, I am receiving the compilation error: Error(283): invalid xpath expression xpath expression "string('<html> <body> <p><b><span style='font-family:"Cambria Math","serif"'>Dear </span>BBB</b><
-
Trigger workflow from web form
HI Experts, I have a requirement to trigger workflow when a web form is completed through a portal and saved.I also need to perform certain validations on the fields in the web form before triggering the workflow.The web form would then go the prope