BAPI_INSPOPER_RECORDRESULTS:result does not appear in inspection lot...

Hi,
I am using BAPI_INSPOPER_RECORDRESULTS to record inspection lot result at characteristic level.
When I use this BAPI, it does not give me an error.
But the values against each characteristic does not appear  in the result field of that characteristic.These are not getting updated. system status shows INSP RREC.
I am passing the result value as  "mean-value" field in bapi charresult table..
what is the solution for this?
I am trying BDC for the same purpose in tcode QE51N. but in between there is error msg promp..so BDC is not working after that promp as it is asking for user entry for the mandetory field "Engineer's name"..
Kindly provide the solution..

Hi,
maybe QE11 is an option for recording results vai BIM.
Cheers,
S>

Similar Messages

  • Pop-up screen does not appear for inspection point- In-process inspection

    Hi,
    We havs set up inspection points( time-based) in the master recipe. In that inspection point , we have defined date,time and inspector name as 3 fields to be maintained , before the results recording can start for each characteristic.
    Even though the inepction point is assigned in the header QM data of recipe , system does not give the pop-up at all to record the date , time and inspector's name.
    Please let me know what settings might be missing to get this pop-up screen to record the inspection date,time and inspector's name.
    Regards,
    Manohar

    The Sampling procedure with free inspection points radio button is chosen. However, we are not getting the pop-up screen of QE11.
    What we are trying to get in QA32 , is when we click on "results recording" push button , we want to get QE11 screen to pop-up so that the inspector's name and date and time are recorded , before the results recording screen comes.
    Please suggest whether this is a personal setting or master data setting or config setting or some exit to be used.
    Regards,
    Manohar

  • How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
    Customized Progress Indicator - Captivate blog
    If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
    And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

  • String limit does not appear in result list

    Hello
    I have a sequence file with a sequence call "String limit test". After running the sequence from a process model, the "Limits" container does not appear in the result list of the main sequence. I have checkec the IncludeInReport flag for the Limits container, still I don't see it.
    Basically I need this information after calling the MainSequence in the client file, in order to create a report file. How to inclide the variable in the ResultList[]?
    Madottati

    Madottati,
    All the data from Step.Result will be copied to Locals.ResultList. Limits container for the step is outside Result container and hence is not copied to the ResultList. IncludeInReport flag affects only properties that are in a result list or that TestStand copies to a result list.
    http://www.ni.com/white-paper/8289/en/ contains more details about what properties gets added to the Result List.
    You can use Additional Results feature toa add Limits container to the ResultList.
    - Shashidhar

  • In attempting to burn a playlist onto a new CD, iTunes seems to burn about half the tracks then shuts down and issues an error msg. (4900) - although that msg. has rec'd a lot of attn., there does not appear to be an adequate or workable fix or suggestion

    In attempting to burn playlists onto new CD's, iTunes regularly completes half the burn, stops, ejects the CD and issues error msg. #4900.  Although there appears to have been similar problems for some time, I cannot locate any suggestions for fixing the problem.  I have installed the newest version of iTunes but that does not appear to have any effect on the problem.  Thoughts?

    I had the same problem after updating my DVD-Drive Firmware.
    Disabling the Option to burn "CD TEXT" solved my problem. Hope that helps !!

  • Error in transaction COGI does not appear when using FM BAPI_PROCORDCONF_CR

    Hi,
    I use FM BAPI_PROCORDCONF_CREATE_HDR to confirm the order but the error for goods movement does not appear in COGI but it does appear during manual confirmation in transaction COR6... can anyone help me with this? Thanks a lot!
    Rgds,
    Mark

    Hi,
    maybe QE11 is an option for recording results vai BIM.
    Cheers,
    S>

  • Convert PDF Chrome extension does not appear/install (Acrobat XI)

    When I installed Acrobat XI, the Chrome extension to convert webpages to PDF does not install or appear in Chrome. I tried repair installation from Help menu of Acrobat, it still did not resolve the question. The extension also does not appear on the extension list, in case you're wondering its deactivated.
    Any help would be appreciated
    Cheers

    I think there might be some confusion about what you are asking since I think that the Adobe Acrobat Create PDF extension is only available for Adobe Acrobat Pro XI (11) and I don't think that you will find it in the version 10 directory (although I could be mistaken since I do not have version 10).  One you update to the latest version of Adobe Acrobat Pro XI (11), and also apply the latest updates to Google Chrome, then the extension should be enabled.  I am running Google Chrome version 33 and have Adobe Acrobat Pro version 11.0.6.70 and the extension works alright for converting basic webpages.  The Adobe installation directory that contains a copy of the extension depends on your operating system and installation and whether or not you have a 64-bit machine.  For example I am running Windows 7 64-bit and I was able to find a copy of the "WCChromeExtn.crx" extension file in the directory:  "C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Browser\WCChromeExtn"
    On the other hand if you are asking how to install the "WCChromeExtn.crx" Adobe Acrobat Create PDF extension without updating Adobe Acrobat Pro, that is a much more advanced procedure.  If you have Windows 7 typically certain file types and locations that will not be indexed so you may not find what you are looking for with Windows search.  That is why someone suggested using a third party search indexer to find the extension file.  Another person suggested extracting the file from the Adobe update, and I also think that is the way to go.  However the method that was described previously is very complicated and uses a lot of unnecessary scripting for what you really need.  I propose that you download the latest update directly from Adobe and then extract the extension from the update file.  Here's how to do that in Windows:
    1. Download the latest update file from Adobe (e.g. "AcrobatUpd11006.msp")
    http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
    2. If you are interested in some background on Windows Installer files, check out these links and read about MSP files and extracting resources, otherwise go to the next step:
    http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/basics.html#installer-file-ty pes
    http://www.jsware.net/jsware/msicode.php5
    3. Rename the incremental update MSP file extension to CAB (e.g. from "AcrobatUpd11006.msp" to "AcrobatUpd11006.cab")
    4. Use an archive utility such as WinRAR, WinZip, or 7-Zip to open the CAB file and extract the "WCChromeExtn.crx" CRX extension file
    5. Drag and drop the extension CRX file onto open Google Chrome window extension page to install and configure (chrome://extensions/)
    There are some other forum topics and a blog post that deals with some installation issues with the Google Chrome extension:
    http://forums.adobe.com/thread/1332770
    http://forums.adobe.com/thread/1165998
    http://blogs.adobe.com/acrobat/tip-google-chrome-the-adobe-acrobat-create-pdf-extension/
    http://blogs.adobe.com/acrobat/tag/chrome/
    I hope that this might help you with getting the extension installed.
    I currently am having some issues with the Adobe Acrobat Create PDF extension for Google Chrome when I try to convert secure https webpages, the output of the PDF converter does not retain my logon information, and does not convert the secure webpage.  The resulting output of the converted https webpage is either a logon screen or a blank pdf with only the URL listed at the bottom.  I hope that this might get fixed with an update or if anyone else might know of a workaround or solution.  Thanks.

  • Boot system flash: does not appear on 2960 running config

    Dear friends,
    On the 2960, i have two .bin images and i am pointing to the latest one.
    However, the boot system flash: command along with the new image does not appear in the running config but it appears in the
    show boot command.
    t3a.sidradc.dmz.01#dir flash:
    Directory of flash:/
        2  -rwx        2131   Jan 3 2010 07:30:45 +03:00  private-config.text
        4  -rwx     8040418   Mar 1 1993 05:31:51 +03:00  c2960-lanbasek9-mz.122-50.SE3.bin
        5  -rwx         676   Jan 3 2010 07:28:50 +03:00  vlan.dat
        6  drwx         128   Mar 1 1993 03:02:32 +03:00  c2960-lanbasek9-mz.122-44.SE6
      546  -rwx        4120   Jan 3 2010 07:30:45 +03:00  multiple-fs
      548  -rwx        9001   Jan 3 2010 07:30:45 +03:00  config.text
    32514048 bytes total (21123072 bytes free)
    t3a.sidradc.dmz.01(config)#boot system flash:c2960-lanbasek9-mz.122-50.SE3.bin
    t3a.sidradc.dmz.01(config)#exit
    t3a.sidradc.dmz.01#wr
    Building configuration...
    [OK]
    t3a.sidradc.dmz.01#sh boot
    BOOT path-list      : flash:c2960-lanbasek9-mz.122-50.SE3.bin
    Config file         : flash:/config.text
    Private Config file : flash:/private-config.text
    Enable Break        : no
    Manual Boot         : no
    HELPER path-list    :
    Auto upgrade        : yes
    Auto upgrade path   :
    NVRAM/Config file
          buffer size:   65536
    Timeout for Config
              Download:    0 seconds
    Config Download
           via DHCP:       disabled (next boot: disabled)
    t3a.sidradc.dmz.01#sh run | inc boot
    boot-start-marker
    boot-end-marker
    Are you aware of any reasons for this?
    Thanks a lot
    Gautam

    and the other being the issue where IOS can return the prompt before it's done unpacking the files
    Ok, now what EXACTLY is the appliance and IOS version?  The only time I know of this bug is the Metro Ethernet (ME) switches and when the current appliance is upgraded FROM an IOS version 15.2(1)S.  
    But there is a "workaround" which Cisco doesn't want to publish (don't ask me why not):  Use "archive tar /x" and, optionally, delete the old IOS sub-directory.
    Personally, I wouldn't recommend anyone using the "copy the BIN file" method unless you know what you are doing or you've put extra measures in place.  The "archive /x tar" and/or "archive download-sw" was developed so that it could be automated and the operator can see the result at the end.  The "copy the BIN file" method doesn't give anyone a result whether or not the file was copied or not or was the file copied completely.  
    Regularly, I would upgrade our switches (2960/2960S, ME-3800X, 3560E/3560CG, 3750X) fleet using the "archive download-sw" method and I don't use scripts.  I just copy-and-paste the command.  So far, since 2009, I've "lost" only 6 switches when I upgraded the switch to upgrade the wrong file (another IOS bug on it's own) and I had to physically show up and upgrade using ROMmon.  Every time I would upgrade, about 900 switches (some in a stack), it would take me about 4 days.  Even though I work with three guys who's very good at almost any scripting but we've come to a unanimous conclusion NOT to use scripting.  
    Moving on, if "copy the BIN file" is still a preferred choice, I would like to know how do you go about verifying the file was copied completely?  Whenever I resort to the "copy the BIN file", I ensure the file copied is complete by verifying the MD5 hash value against the MD5 hash value found in the Cisco website.  Trust me, adding this additional "layer" of security saved me doing ROMmon upgrade so many times.  

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

    Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
    == today

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Manage Account does not appear in the options sync tab. How do I manage my account to get the recovery key?

    I cannot sync my Firefox 18 desktop with iPad or iPhone browsers. I have tried everything suggested on the Web and have tried safe mode as well. When I enter the three-line synch code, I get a sync failure. I have deleted my account and then set up a new account without success. Manage Account does not appear in the options sync tab. How do I manage my account to get the recovery key?
    I’ve spent hours on this and am considering using Chrome as my regular browser since I have no trouble syncing Chrome with apps. Help appreciated.

    You can only inspect the sync key via manage account if this device is has been setup and is connected to the sync server.
    You can find the sync account password and the sync (recovery) key in the password manager on computers where a sync account with a specific e-mail address has been set up.
    Look for:
    * chrome://weave (Mozilla Services Password)
    * chrome://weave (Mozilla Services Encryption Passphrase)
    You can look at this version of the about:synckey extension that I have modified to show the sync key in current Firefox versions (desktop and mobile).
    * http://www.freefilehosting.net/aboutsynckey-11-fnfx
    * [[/questions/942893]]

  • Instant Client on 64-bit Windows 7: Driver does not appear in System DSN

    Instant Client on 64-bit Windows 7: Driver does not appear in System DSN tab when creating a new Data source.
    What I did so far:
    I downloaded the basic and odbc zips for Window 64-bit.
    Unzipped the basic zip.
    Unzipped the odbc zip to the same directory.
    Added the dir path to the System Environment Variable called Path.
    Double-clicked on the odbc_install.exe to run it from Windows Explorer.
    Then I tried to add the driver to create a new data source but it does not appear in the list of drivers.
    From a cmd window, I navigated to the instant client directory and tried to run odbc_install again.
    I got the message: Oracle ODBC Driver with same name already exists.
    What am I missing?

    hello, I did it like that you say,but the result also is "oracle odbc driver with same name already exists". I don't kown what can I do it ,Thank you!

  • Why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?

    I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
    Any help, please?
    Dave

    Hi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
    Kind Regards
    Dave Munn
    Original message----
    From : [email protected]
    Date : 02/02/2015 - 06:45 (GMTST)
    To : [email protected]
    Subject :  why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
        why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
        created by station_two in Photoshop General Discussion - View the full discussion
    First a clarification: you are not addressing Adobe here in these user forums.  You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
    I'll give it my best shot anyway.
    Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
    Different engineering teams, also.
    From this perspective, it will be difficult to give you a direct answer to your "why?" question.
    Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
    Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are.  The least you could show is post examples from your panoramas that have gone wrong.
    I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
    The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years).  I found Elements so limited and so bad that I successfully demanded a refund from Adobe.  IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view.  I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
    Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
    Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Photo Gallery & Vimeo & YouTube Widgets does not appear

    Hello Forum,
    I created a new homepage. www.pengpalast.de - If you click on "the holycoaster s(hit) circus" at the front and then on photo, you will see, that there is no gallerx. But i created one in I Web, also a Trailer (with the embeddes function of vimeo) on the front page, directly under the links (the hole between links and facebook). Why does this happen? Is it because i have a picture for the Page background? All Vimeo, You Tube, Photo widges does not appear on my page.
    And it is a beta version.. there a lot of formation faults on the page, please don`t mention, i just wanna clearify the big ones.
    Thanks for help
    Dennis

    It appears that not all of the files are getting uploaded.  Particularly the Scripts folder. So if you're using iWeb to upload to the server change that and publish you site to a folder on your hard drive and use an FTP client like the free  Cyberduck to upload the site folder to your server.
    OT

  • "Edit in Photoshop Elements" does not appear as option in Lightroom 4.3

    After viewing this artical:
    http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html  and completing all options related to the Mac, the "Edit in Photoshop..." still does not appear as a clckable option in my Lightroom 4.3 program which has all the current updates.  Also, my Photoshop Elements 11 program also has all the current updates.
    Please note that in the interest of time, that all of the "solutions" were attempted in the above mentioned link
    Also, was on hold with Adobe Lightroom help phone support for over 1.5 hours without any agent answeing the phone.  Also Adobe automatied phone support states that Photoshop Elements is not supported free of charge and it is fee based.  How is a consumer suppose to have a problem corrected in Lightroom that stems from Elements when it is suppose to intergrate that way between the two programs but any help to try to correct the way it is suppose to work will cost you an addition fee in phone support for Elements?
    And help on fixing this issue will be apprecitated.
    Lightroom v 4.3 / Camera RAW v 7.3
    Elements v 11.0 / Camera RAW v 7.3.0.71

    Did this with Adobe support in LIVE CHAT, what a waist of time.  Although this will correct the issue, it is like a work around and not solving why EDIT IN PHOTOSHOP... is not a clickable option (greyed out) in LR.
    After the configure as suggested above, does this preclude and editing in Lighroom?
    What I want to do is:
    Edit the photo in LR except for:
    the useage the great Spot Healing Brush Tool that PSE offers, edit that part of it in PSE then SAVE the results back to LR.  Any problems or suggestions for this?
    Thanks so much

Maybe you are looking for

  • Wireless Sync (not Bluetooth or WiFi)

    I'm trying to find out if the "pushed" email/contacts feature is available on the iPhone. My Wife's Boss has it on her Treo using Version's Wireless Sync plan, and i believe Cingular/AT&T may have the same feature called Xpress mail, but i've not see

  • Author needs help with iPhone (or any smartphone)

    Hello. I am nearing the end of a YA (young adult/teen) thriller. I want one of my characters to be able to copy the information from a smartphone, (type not specified), onto a computer (type not specified). The information would include text messages

  • Question about Percent Function

    This kinda goes along with my question about the plus sign. That was answered by the fact it means there is more than can be displayed in the field with the plus sign. The problem I am having is all of the fields with the plus sign are formated to be

  • Why is Illustrator CS6 not accessing available RAM?

    Stats first... 2010 iMac quad core i5, 16 gigs RAM, OS X 10.6.8 I can only hope that there is some simple setting that I'm just not aware of. I've been trying very hard to understand why CS6 (now 64bit) is acting more sluggish than CS5. If I start an

  • HT201210 My iphone 4 is frozen during the iOS 6 installation.

    It has been frozen showing the apple and a half-complete bar for 4 hours now.  What should I do?