'BAPI_ISUCONTRCT_CHANGEFROMDATA' what all paremetes i need to pass

Hi Experts,
In
'BAPI_ISUCONTRCT_CHANGEFROMDATA' what all paremetes i need to pass in import structure
contractdata =
contractdatax =
in contractdata i am passing vertrag what else i need to pass in this structure
, in contractdatax all parameters are size of characters 1
Thanks

That bapi doesn't have the instructions on the documentation - but look at another one to find out how to use bapis - or check with your technical team, as bapi usage is standard functionality.
regards,
bill.

Similar Messages

What All Do I Need If I Want To Upgrade My Macbook Hard Drive?

hey guys.
i've tried reading up a little but i was hoping someone (or a few people) could give me some straight up answers.
if i want to upgrade my macbook hard drive what all do i need? just the hard drive? or are there other pieces?
also.. whats a good 250GB one? i found this one on ebay: http://cgi.ebay.com/NEW-2-5-Western-Digital-250GB-SATA-Harddrive_W0QQitemZ220271 134397QQihZ012QQcategoryZ158853QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
is that one any good? i just know the name (Western Digital) and have heard good things about them...
any comments are welcome.
thanks!
beau

I got a 320GB sata 2.5" hard drive and installed it myself, its easy. I also got a caddy so I can use my old 120GB drive as a back up. Make sure u have everything backed up! Seagate and western digital drives are most popular. I asked similar q and got this answer"
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
If your backup is bootable, then boot from the external drive and use SuperDuper to clone it back to the newly installed drive.
Mac Pro 2.66 Ghz; MacBook Pro C2D 2.33 Ghz; MacBook Pro 2.16 Ghz Mac OS X (10.5.4) Intel iMac C2D 17 "; MacBook 2.0 Ghz.
And
Now, to install the hard drive, follow http://www.ifixit.com/Guide/Mac/MacBook-Core-Duo/Hard-Drive-Replacement/86/5/

What all do I need to remove my PC ?

what all do I need to delete from my PC in order to completely delete I tunes so I can re-load it and see if taht helps my problem, I think I may be missing something - thanks!

thanks for you help, but do you know by name what each copmponent is called, so I do not miss something ? I know about Itunes and quick time,bonjour, and the two "apple" applications, but am I missing something ? I tunes will not burns CDs and it says that drivers, etc are missing, and to re-install itunes and when I re-download - it still says the same thing, very frustrating to say the least -it also says cd burning software is missing, I have tried going to an earler version of itunes that I had no problems with, but then i get the error that my library is in itunes 8.1 -Thank you to anyone who can help me !

What all things I need to install for Report Services?

I just want to use Oracle 9IAS Release 2 for Reports purpose.Along with RDF reports I nee to use the report service for JSP reports also.
So just I want to know what all things I need to install from Oracle 9IAS CD?
Any suggestion.........

2ManyDogs wrote:Read the Beginners' Guide.
+1
I've used Linux for several years, but only recently installed Arch for the first time. I installed Bridge Linux, Chakra, and later ArchBang, and after getting a feel for pacman (I think it's great!) and, with Bridge and ArchBang, the Arch repos, I was convinced that I wanted to go ahead with an Arch installation. Not sure if this is an option for you or not, but I actually tried two "test" installations on a spare computer first, taking detailed notes, with tabs in my browser (on another computer) opened to the Beginners' Guide and the "official" Installation Guide. I also kept the Bridge and ArchBang installations; kinda nice to be able to take a look at them sometimes to see how things are set up there. I don't know if Arch users would recommend this type of approach, but it has worked out well here.

What cable do I need to pass pic from my pin drive to my iPad and which one to see my movies on my tv from iPad

I would like to pass pictures from an external pin drive to my iPad and want to know what cable I need . I also want to know what do I need to see a movie from iPad to my tv .

You'll need a thunderbolt adapter for your MBA that will allow you to connect to your TV through HDMI, VGA or whatever port your TV supports. The following link will help you determine which cable(s) you'll need:
http://store.apple.com/us/mac/mac-accessories/cables/cable-chooser
Good luck!

How can we interface external usb camera or usb device(storage, card reader) to Ipad 2.What all things are need(any development Kit apart from IOS sdk)

Hi,
Before going any further in my research, I want to know the views and opinions about the intent of my work I am about to start.
AIM : I am trying to interface an external uvc camera with the ipad 2 and iphone .Just like in android there is a node(in unix and linux everythign is a file)which gets created in the /dev/ directory which can be accesses by the application using the native interfaces (JNI) and finally via the android code.I am trying to develop the similair application for the ipad 2 and iphone.
Can some one plz point out :
(1) How I can interface external hardware like ( external uvc camera) or any other USB device(a card reader, a storage device, a barometer etc)
(2) I have googled about Apple's Authentication chip which can be used to interface the external h/w.Can some one point out how useful it is.Is this related to that somehow.
(3)What are the things similair to JNI, node, /dev/ in the IOS for Ipad 2 and Iphone.
I will be highly obliged ,if some one could provide me the top pointers on it.
Thanks and Rgds,
MangoApple

1.) See
External Accessory Programming Topics
Connecting to an Accessory
Monitoring Accessory-Related Events
2.) See the MFi Program

Need to pass address to BC using Contactrecord...

I am trying to load an address as a string to the Address in the ContractRecord. It will not take the string and says that it can not convert from string to the array type it wants. I have looked and try to load the array but does not work. I do not know what to do. Need to pass the record to the array so as to pass the container to BC. What am I missing? If you need any more information please ask.
Thank you,
Carlos

You can pass all parameter (rsparams-kind = 'P') and select-options (rsparams-kind = 'S') as a single internal table of type RSPARAMS. Go on appending the field names and values as rows and pass using SELECTION-TABLE parameter of SUBMIT command.
I gave appending one set of selection values for s_budat field but you can go on appending more values for s_budat and other fields.
DATA: lt_rsparams TYPE TABLE OF rsparams,
      ls_rsparams TYPE rsparams.
CLEAR ls_rsparams.
ls_rsparams-selname = 'S_BUDAT'.
ls_rsparams-kind = 'S'.
ls_rsparams-sign = 'I'.
ls_rsparams-option = 'BT'.
ls_rsparams-low = '20111001'.
ls_rsparams-high = '20111031'.
APPEND ls_rsparams TO lt_rsparams.
SUBMIT zpp_rep_hemm_perf WITH SELECTION-TABLE lt_rsparams
                  USING SELECTION-SCREEN '1000'
                  AND RETURN.

What exactly do I need to do to set up wireless?

Please forgive me if I'm in the wrong section. I am totally new to all of this. I have comcast as an internet provider. I want to be able to use wireless internet on my MacBook Pro. What all do I need? I want to know from real people b/c it seemed like in stores, people are just trying to sell me things. My house is close to 3000 square feet for what it is worth. I'm overwhelmed and not sure where to begin. Any help is greatly appreciated.

Are the 2 PCs connecting via wireless or Ethernet?
Did Comcast provide a router or just a modem?
If Comcast provided a router and your PCs are connecting via Ethernet, you can still use either the AirPort Express (AX) or AirPort Extreme base station (AEBS). The 2 PCs will connect via Ethernet to the router as they do now. Or the 2 PCs can connect wirelessly to the AX or AEBS. (Assuming that the 2 PCs have wireless ability).
If Comcast only provided a modem and the PCs are to connect wirelessly, you can still use either the AX or AEBS.
If Comcast only provided a modem and the PCs are to connect via Ethernet, the AX alone won't work for you. In that case you would either need the AEBS or another wireless router with multiple Ethernet ports.

What all sofware is required to develop a userinterface.vi to read data from a data logger and save in a file

hi,
i am working on creating a GUI.vi to read data from the datalogger and the same should be used to set the date ,time,etc.i am thinking of using VISA to read data through serial port(COM1),that interface is available.but when i tried to read data from the logger i am getting timeout error.what should i do ?i am using the example given with labview 7.0 .can any one suggest me what all things i need to do if i want to read datalogger to a file.Is there any one who workrd on this.please reply me as early as possible,
bye
vbkraju

You're welcome--I'm happy to help.
The LabVIEW <-> Serial.vi is a good example that allows for writing commands to an instrument and reading back from it using a VISA Session. One of the inputs on this VI is the Resource Name. You need to ensure that the name of your serial port is in this drop down menu, so that the program is sending and receiving data from the correct place.
The VI is setup so that you can send a command to the external device, and then receive data back. I am not sure about the Spectrum 4000, but most devices have commands that they receive to tell the device which data to send back over the serial port. The VI has a default string to write of *IDN?, which is a common command that tells the instrument to return an ident
ity string. The fact that the program is timing out for you indicates that the program never received any data from the device. Either the device is not configured to automatically send data, or the correct command is not being sent to the device. Your datalogger manual may be able to help you determine what serial commands it needs to receive to send the data out you expect.
I hope this will get you further along in your application.
John M

What All Should I Learn To Achieve These Effects?

Hi,
I would like to know what all I would need to learn and which extra plugins I would need to buy to achieve these effects (Looking mainly to do the text effects and all the in video transitions)
I already have After effects Cs4.
http://youtu.be/tIPLTiKAQTo
The reason why I am asking this in particular is because I will be doing only these kind of effects and nothing more. So I neednt waste time learning things I will probably never use.
Thank you.

Unless there's a specific reason for reducing the frame size of the original footage I always work at maximum resolution. IOW, Don't resize your 550D footage unless you can come up with a really good reason to do so.
My content is 100% for the web. I will be creating just one or two videos in 720P (For streaming via amazon S3 and cloudfront) and the rest in 480P (For youtube).
Unfortunately, there is no one size fits all solution to the problem.
I understand. My case is pure youtube and web videos. So I guess I should follow the below scenario
--> Shoot in Full HD.
-->Import the full HD to some video editing program and perform trimming as required
--> Import trimmed full HD to AE.
--> Apply the required effects (similar to the ones I showed in the video in my first post).
--> Import it in Adobe Media Encoder and Resize it to 480p or 720p as per the requirement and render.
--> Follow the above 4 procedures for the opener video (I have spotted a very good opener AE template for videohive.net)
--> Take the output videos and then stitch them together using a software like sony vegas or some video editing software and join them
--> Render the output video
Does the above procedure seem good?
A preset is something everyone using AE should know how to use and to create.
I tried some text animation presets. Worked out fine. Going to learn some more on this.
There you go.
Thanks a lot for your help.
If you like wasting a lot of time, effort and storage space you should use the workflow you propose. If you want to be more efficient, you should edit your footage BEFORE you do AE work.
How about the work flow I mentioned above?
There are all kinds of editing applications availble, Adobe makes one: Premiere Pro.
I took a look at it. It seems too costly. I think I will go with Sony Vegas

What value we need to pass as parameter in where clause in select query

Hi ALL,
I have written following query, it was executing fine and returning me all the rows with search criteria.
SELECT *
FROM
PRTY_RQST PR
JOIN BUSN_APPLC BIAP ON BIAP.BUSN_APPLC_ID = PR.BUSN_APPLC_ID
JOIN INTN_STATS INSTS ON INSTS.INTN_STATS_ID = PR.INTN_STATS_ID
JOIN INTN_PROCES_TYP INTPTY ON INTPTY.INTN_PROCES_TYP_ID = PR.INTN_PROCES_TYP_ID
LEFT JOIN RQST_TYP RQSTYP ON RQSTYP.RQST_TYP_ID = PR.RQST_TYP_ID
JOIN ADDTN_RQST_INFO ADTINF ON PR.PRTY_RQST_ID = ADTINF.PRTY_RQST_ID
JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF.ADDTN_INFO_KEY_TYP_ID = ADDKEY.ADDTN_INFO_KEY_TYP_ID
JOIN PRTY_KEY PRTKEY ON PR.PRTY_RQST_ID = PRTKEY.PRTY_RQST_ID
JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY.PRTY_KEY_TYP_ID = PRKYTP.PRTY_KEY_TYP_ID
WHERE (BIAP.BUSN_APPLC_NM = 'bpel')
AND (INTPTY.INTN_PROCES_TYP_NM = 'FulfillmentOrder')
AND (PR.UPDT_BY = 'update3')
AND (INSTS.INTN_STATS_NM = 'Submitted')
AND (PR.CHLD_RQST_IND = 'N')
AND (PR.TRACK_RQST_IND = 'Y')
AND (RQSTYP.RQST_TYP_NM = 'PensionPortfolioRebalance')
AND (RQSTYP.RQST_CLASS_NM = 'Composite')
AND (PRKYTP.PRTY_KEY_TYP_NM = 'NPIN')
AND (PRTKEY.PRTY_TYP_VAL = '101101' )
AND (ADDKEY.ADDTN_INFO_KEY_TYP_NM = 'PlanNumber')
AND (ADTINF.ADDTN_RQST_TYP_VALUE = 'TBMBUpdated');
My question here is i don't want pass the value for BIAP.BUSN_APPLC_NM, still want to get the values for remaing conditions. what value i need to pass here.
I tried Null it giving me no rows. can some one help me on this.
Thank you in advance.
Vijay

933325 wrote:
thank you,
since it is search criteria. I have to use OR instead of AND. this resolved my problem.
SELECT *
FROM
PRTY_RQST PR
JOIN BUSN_APPLC BIAP ON BIAP.BUSN_APPLC_ID = PR.BUSN_APPLC_ID
JOIN INTN_STATS INSTS ON INSTS.INTN_STATS_ID = PR.INTN_STATS_ID
JOIN INTN_PROCES_TYP INTPTY ON INTPTY.INTN_PROCES_TYP_ID = PR.INTN_PROCES_TYP_ID
LEFT JOIN RQST_TYP RQSTYP ON RQSTYP.RQST_TYP_ID = PR.RQST_TYP_ID
JOIN ADDTN_RQST_INFO ADTINF ON PR.PRTY_RQST_ID = ADTINF.PRTY_RQST_ID
JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF.ADDTN_INFO_KEY_TYP_ID = ADDKEY.ADDTN_INFO_KEY_TYP_ID
JOIN PRTY_KEY PRTKEY ON PR.PRTY_RQST_ID = PRTKEY.PRTY_RQST_ID
JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY.PRTY_KEY_TYP_ID = PRKYTP.PRTY_KEY_TYP_ID
WHERE (BIAP.BUSN_APPLC_NM = null )
OR (INTPTY.INTN_PROCES_TYP_NM = 'FulfillmentOrder')
OR (PR.UPDT_BY = 'update3')
OR (INSTS.INTN_STATS_NM = 'Submitted')
OR (PR.CHLD_RQST_IND = 'N')
OR (PR.TRACK_RQST_IND = 'Y')
OR (RQSTYP.RQST_TYP_NM = 'PensionPortfolioRebalance')
OR (RQSTYP.RQST_CLASS_NM = 'Composite')
OR (PRKYTP.PRTY_KEY_TYP_NM = 'NPIN')
OR (PRTKEY.PRTY_TYP_VAL = '101101' )
OR (ADDKEY.ADDTN_INFO_KEY_TYP_NM = 'PlanNumber')
OR (ADTINF.ADDTN_RQST_TYP_VALUE = 'TBMBUpdated');
AND (ADTINF.ADDTN_RQST_TYP_VAL_DT ='06-JUN-12 04.18.56.000000000 PM')
AND (ADTINF.ADDTN_RQST_TYP_VAL_NUM ='123123') ;
once again thank you all.But that's a completely different query than what was in the original post

TO REMOVE BLOCK WHAT I NEED TO PASS IN BDCTAB ???

Hi,
This is Biswajit. kindly help me to solve this problem.....................
The program will select all deliveries according to the selection criteria :
Sales organization (Mandatory)
Distribution channel (Mandatory)
Plant (Optional)
Delivery (Optional)
Only deliveries with delivery type Zaaa, Zbbb, Zccc, Zddd containing
a xx block have to be processed which are completely related to batch
determination.
select all items which are batch relevant and have no batch assigned.
o For each selected item select the sub-items which are assigned to a
batch and count the quantity to be delivered.
o Consider a delivery item as completely related to batch determination
when the quantity to be delivered on item-level is equal to the total
calculated quantity to be delivered on sub-item level.
Consider a delivery as completely related to batch determination when
all delivery items are completely related to batch determination.
The removal of the BA block has to be carried out using the batch-input
technique for transaction VL02N (Change delivery).
NOW IF I WANT TO CODE BDC FOR VL02N TO REMOVE BLOCK WHAT I NEED TO PASS IN BDCTAB .
PLEASE REPLY AS EARLY.
Thanks

Hello Gints99,
If the device is in recovery mode then I suggest plugging the phone into the comptuer and restoring with iTunes.
Here is an article with more information about recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
Sterling

HT204382 what software do i need to play movies on avi file . have connected a external memory disk and all the movies are in avi format.

What software do i need to install in order to be able
to play movies in .avi format.
have connected an external memory and all the entertainment
files are in .avi format.
Ansver i get : does not support

VLC is a good choice. While I don't know if it will play your files, Perian is a helper app for Quicktime which allows you to play a lot of things in the Quicktime Player.
There is also Flip4Mac which allows you to play windows media files in Quicktime.
Finally, note that the extension on a video file doesn't really tell you what you need to play it. The .avi, .mpg, etc. is only the wrapper around the actual video. The video is encoded by some means and needs to be decoded. The video inside the .avi can be encoded in one of many different schemes.
VLC, Perian, Flip4Mac, and many others, are all able to decode various flavors of encoding. Having all of those in your toolbox will help to allow you to play most of the things you'll find.

So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?

So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?

Have you performed a reset? Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo appears. Release both buttons and await restart.

My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software. I'm not sure what to do to remedy this situation.

My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software. I'm not sure what to do to remedy this situation.

This might sound like a silly question, but are you sure the iOS devices (iPhone, iPad, iPod touch etc.) are still trying to connect to the same network from your own Airport router, as the MacBook Pros are? If you tap Settings on them, is the network name next to where it says Wi-Fi, the right one?
I've got a weird feeling that either in the past couple of days, a neighbour got an Airport device and hasn't set it up yet (causing your iOS devices to try to help), or that perhaps there's an issue with your Airport router and they're noticing it and trying to help out, while for whatever reason, Airport Utility isn't opening itself on the MacBook Pros like it normally should if there's a problem.
If you open Airport Utility on one of the MacBook Pros, does it report any problems with your Airport device, and can you view/edit the settings on it?

'BAPI_ISUCONTRCT_CHANGEFROMDATA' what all paremetes i need to pass

Similar Messages

Maybe you are looking for