BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT

Hi all gurus,
I would like to use in a custom report a BAPI/Function Module that help me to simulate KPF6 in order to post planning costs for internal order and cost element (layout 1-401).
So the input should be:
1) Version
2) period from
3) periodo to
4) year
5) internal order n.
6) cost element n.
7) value
I found a lot of BAPI but don't know the correct one and how to use it (example how to fill the input value).
Can anyone help me on that?
Kind Regards

In additio to the previous I found the BAPI_COSTACTPLN_POSTPRIMCOST but don't know if it's the correct one and how to use it (some example fitting the my case will be very appreciated).
If the quoted BAPI is correct.
I tested it filling all fields as following:
HEADERINFO:
CO_AREA=FFCA
FISC_YEAR=2008
PERIOD_FROM=001
PERIOD_TO=012
DOC_HDR_TX='blank'
INDEXSTRUCTURE:
OBJECT_INDEX=000001
VALUE_INDEX=000004 (hope this point at Interna Order)
ATTRIB_INDEX=000000
COOBJECT:
OBJECT_INDEX=000001
ORDERID=ZO53-08IMZ
TOTVALUE:
VALUE_INDEX=000004
COST_ELEM=3224048
FIX_VALUE= 200,0000
DIST_KEY_FIX_VAL=2
The Return table is set to 0. Nothing happens.....I suspect something related to indexstructure or index is wrong..
Could anyone help me on that?
Kind Regards

Similar Messages

Internal order and Cost center

hi guys
can anyone please explain me why do we have cost centers and internal orders?
If we can track cost to cost center then why do we need internal orders?
please give some detailed explanation.
thanks

when you are posting a document and if the g/l is created as a cost element then
you have to either assign a cost center, profit center, internal order etc
so when you are posting an expense and if its for that project you assign the
internal order and when the project is finished you can settle it to a cost center.
If we can assign both internal order and cost center i dont think so but not very
sure. Best way to learn these things i would recommend is try it in test system
that way you will understand better about the whole flow and it will stick in your
mind.
Regards,
Zaid

BW Datasource for Internal Order and Budget

Hi Gurus,
I would like to ask what datasource I can use for FICO specifically for Internal Orders and Budget. I have looked at all the datasources under the CO node but i can't seem to find a datasource that has the details for the Internal Order and for the Budget.
Thanks in advance
- Kit

Hi,
Check these datasources once.
0CO_OM_OPA_8-- Orders: Budget Line Items
0CO_OM_OPA_2 --Orders: Budget
Refer this link as well.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/de43fcf6e2154bbbbcecbc63cdf287/frameset.htm
Regards
Karthik

TX CNS41 - settled cost from internal order to WBS element not displayed

Hi PS Expets,
I have a question regarding transaction CNS41 "Structure Overview" where cost settled from an internal order is not displayed in in the report for a selected project. This is in a ECC version 5.0
Settled costs from internal orders are posted with transaction type KOAO on WBS elements and when you check report RCNSTFCO you can see that the following transaction types are deselected when executing transaction CNS41:
delete t_rpsco_m where vorga = 'KOAO' "<   insert
                      or vorga = 'KOAL' "<   insert
                      or vorga = 'KOAP' "<   insert
                      or vorga = 'KOAQ' "<   insert
                      or vorga = 'KOAR'."<   insert
CALL FUNCTION 'HFPM_RPSCO_TO_RPSCO_LIS_CONV'
This is implemented according to OSS note 51971 in order to eliminate internal business volume in the project structure when executing a PS hierarchy report.
But this also eliminate the display of the cost from the internal order.
Any ideas or a work around in order to display settled cost from an internal order on a WBS element in transaction CNS41
Kind regards,
Anne

Hello Tison.
I guess you have the Project created with a BAPI in your system in background. As far as I have seen I'd try the following in ABAP to create Partners in the Project Definition: BAPI_BUS2001_PARTNER_CREATE_M or the corresponding method ProjectDefinitionPI.PartnerCreateMultiple. This should happen in background when the Project is created also.
Best regards.
Jens Schmid

Default Internal order and cost center

Hi Experts,
i am uploading one file into sap and here i am giving GL accounts cost centers and WBS elements.
once i have done with upload.when i am checking in BSEG its showing one internal order and one default cost center with internal order.
i can not understand how its finding internal order and default cost cente(which diffetrent from those cost centers i have mentioned in excel).
please help me to find.
thanks,
Vani

HI,
Thanks for your reply.
i have checked OKB9 and KA03 but there is no default assignment.
checked also OBBH and OKC9 but no subtitution and i can't post manually now.
is there any option.
Waiting for your reply.
Thanks,
Vani

Post to internal order and cost center

we want system show error message if user post to expense account 5****** with cost center and internal order together, i.e.
we can only post to cost center or internal order, but can't be both, can it be done by co validation? or do we use user exit to do it? which user exit? thanks

Hi,
is the internal order a real order or a statictical one?
Regards,
Greta

Statistical posting to Internal order and Cost center while real to PSG

Dear SAP Gurus,
There is a requirement is to post statistical posting to Cost center and IO while real posting to PA. I tested and found that I can have only either of Cost center or IO as statistical receiver. Is this standard behaviour or some error in set up.
Thanks,

Hi
I am not sure how IS-H works.. But for sure, it should allow you to enter 3 stat objects...
There would be some ABAP trick pertaining to IS-H which I am not aware of...
I can guide you a bit... During SD billing, ask abaper to put a break point and manually enter the values for cost center and IO and then post the doc.... One of these 2 will be the outcomes
a. Either it will get posted or
b. It will get over written before posting....
based on the outcome, you will have to decide your next course of action
Also, if your cost center to IO is one to one mapping (Chances would be rare), you can simply write a substitution which would always prevail
I am sorry I could not offer you a complete solution.. But, this is what comes to my mind...
Regards
Ajay M

Settling of Cost for Production Order via WBS Element

Hi Gurus,
Just would like to briefly understand, how I can make use of the WBS Element in the Production Order (Assignment tab) to use as cost settling for a production order? How do i automate the WBS Element in the production Order for a set of given parameters? Is there a config I can use to set a profile?
I have a scenario here as below:
I have various types of production orders:
PO 1 = Production A
PO 2 = Production B
PO 3 = Production C
And for each of the above, I will individually have a WBS Element.
PO1 - WBS Element A
PO2 - WBS Element B
PO3 - WBS Element C
And WBS Element A, B and C is a Level 2 WBS Element which are tied to WBS Element Z (Level 1 WBS Element), which will be settled to a project.
Appreciate your kind feedback on the above on how I can make it work in the PP Order.
Thanks.
Rgds.

Hi Manoj,
I need to understand your process in more detail.
How do you procure? Create a sales order with TAS item category to create a PReq and PO?
Very simple explanation: Resource Related billing/DIP profiles are used to accumulate costs on WBS elements and then bill the client as needed.

Costing on Internal Orders with different plan versions

Hi,
Is it possible to carry out Costing on Internal Orders using different plan versions?
I would like to carry out more than one costing on Internal Order so that I could compare different versions. Maybe there are other parameters (other than plan versions) which can be used for executing different parallel costing.
Best wishes,
Karol

Hi Karol,
In Release 3.0, the following new planning functions are available in order planning:
<b>Copy plan versions</b>
In Release 3.0, you can plan order costs for internal orders in different versions. In contrast to earlier releases, you can now
1. change versions
2. copy versions
3. Here you can select :
the planned values to be copied: annual or total values
whether the planned values in the target version are to be retained or overwritten compare versions using the information system
Planned values are not revaluated in the target version (for example, when you change the value date).
Overhead and settlements are not copied and, if required, must be repeated in the target version
Regards,
Hemachandra K S
<b>Please, donot forget to mark the answer as Helpful, Very Helpful or Problem solved.</b>

Whether OPM Costing considers Internal Orders???

Hello Girish,
Let me introduce myself. I am aditya. I am a fresher in OPM.Infact i wanted to ask Whether OPM Costing considers Internal Orders and if it is yes then ho
Please reply me ASAP.
Regards
Aditya

Yes aditya,
OPM Costing considered all (Internal Order and Sales Order too) Because OPM has sources like Purchasing and Order Management

Internal orders to WBS Element

Hi,
I,m working in a Project System implementation project, where all other modules are already in use.As per the existing process, Internal orders are created for asset accounting.Those are of statistical. All the purchase orders & costs are booked referring to the internal orders, the same cost is directly settled to Asset Under Construction or Asset.As the internal orders are created as statistical, there is no seperate settlement process & all the costs are directly settled either in AUC or in Asset as & when they are incurred(posted).
Now as we are implementing Project Systems, Internal orders are going to be replaced by WBS Elements. Customer requirement is the same process of online settlement of costs to Assets from WBS Element & he doen't want to settle seperately.
Now the issue is, 1) how the process can be mapped in SAP?
I feel creating the WBS elements as statistical, the same process can be mapped. Is it possible/
2) As one project is already in progress & some postings have been taken place against internal orders, customer wants to see all those postings on new WBS element, now how to migrate the same to respective WBS element in the new system?
Thanks
Kishore

Hi Kishore Ji,
For your question, simple answer is, you want to continue all AUC under Project Systems. So far, you have considered statistical internal orders, anyway, which is not possible for you to settle directly. So, please take that amount generate uploading document by using same account and using WBS element as debit and internal order as credit and status you release for internal orders.
WBS elements you create as statistical without selecting account assignment category.
Your problem will be solved.
Assign points without fail.
ALL THE BEST.

Reasons for not up dating the planned revenue in internal order

Dear   CO experts
What are the probable reasons for not up dating the the planned revenue in internal order . Eg : The order   value in CRM order is not flowing to the planned revenue in   internal order . The GL has been defined for the same in ECC and CRM .
What are the points to be checked if the planned revenue does not update the internal order.
Where can i find the documentation for the settings of CRM    to ECC controlling.
Regards
Raj

Hi,
Check in KOT2_OPA corresponding to your order type whether 'Revenue posting' is flagged.
With regards,
Mrinal

I am trying to find a function module or BAPI for internal order change. I

I am trying to find a function module or BAPI for internal order change. I did come across a function module ALE_INTERNALORDER_DB_CHANGE which directly updates the internal order using insert statements. Can i use this for internal order change or this is any other Function module for updating the internal order.
I dont want to use BDC as a option. Please suggest.

This is possible using the Rotator Component Widget from Infosemantics.com.au but it is only compatible with SWF output, not HTML5.
Go to this page and scroll down to the video tutorials about the Rotator Component widget:
http://www.infosemantics.com.au/adobe-captivate/youtube-video-tutorials

PLM table for Internal Order budget, Actual Cost and Actual Hrs

Dear all
In cProjects version 4.0, we have integration with existing ECC 6.0. We create Internal Order manually and assign it to cProjects.
One cProject having one Internal Order.
Resource Planning part is managed in cProjects while Actual Time keeping(CATS with reference to Internal Order), budgeting of Internal Order, Material and Service Procurement which is done against Internal Order is managed in ECC. ECC and PLM are separate systems.
We have RFCs established to transfer actual hrs, budget and actual cost data from ECC to PLM.
Which is the ABAP table in PLM where we get linking of cProject with Internal Order and also actual hrs, budget and actual cost data in PLM system?
Thanks & Regards
Ashish

actual hrs, budget and actual cost data in PLM system?
Its not there, actual hours can be found in DPR_Task but it needs to be transferred by running a report.
The planned cost etc is also calculated at runtime and passed on to Costing object in ECC (Int order/PS)
Actual hours will be in CATSDB in ECC
needless to say actual cost will also be there in ECC and not in PLM, PLM only displays at runtime based on RFC.
If you want to try, Break the RFC and try to check the Evaluation..
Niranjan

BAPI for Internal Order Release

Dear SAP GURU's
Can anybody help me from the following issue
In IM52 once we budget internal order it will automatically trigger mail for user to release internal order, so in this scenario we require BAPI for Internal order release.
KO02 - Change Internal order (Activity : Release Internal order)
Looking for Standard BAPI
Thanks and regards
Alok Dixit

Hi Alok,
I am not sure about BAPI for this function.I suggest you try this kind of function with user exit like COOPA002 using appropriate program logic.
Regards,
Ashok

BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT

Similar Messages

Maybe you are looking for