BAPI_MATERIAL_SAVEDATA -extnd purch view -Er:'No plant specific data exist'

Hi, i am trying to extend the purcahsing view from a template material  for a new material using BAPI BAPI_MATERIAL_SAVEDATA. Both these material belong to the same plant and the template material has a purcahsing view defined.
But after the extention process, when i open the purchaisng view for the new material in MM03 , i get the message "No plant specific data exists".
what can be the reson for this. ?
please advice.
Thanks in advance.
-Shyam.

Are you passing your plant number in your file ?.It seems you are not passing plant data ,Check your data.

Similar Messages

  • How to restrict change to plant specific data in MM01 and MM02 transaction.

    Hi Experts,
    The requirements is to restrict the plant specific data change in one system. As of now we have 2 different system lets say sys-1 and sys-2. our requirement is if at all any of the users are trying to change/create the material in Sys-1 they should be only able to update basic information and parts regional information/global informations only in sys-1.
    Do we have any option in customizing?
    If not then what would be the way to achieve this?
    Please help.
    Thanks!!!!
    Rajesh.

    Hi,
    Please refer the below link it may help you..............
    Authorization object for label Data view in mm02

  • Plant specific ordering unit

    Hi experts,
    Is it possible to use plant specific ordering unit?
    I am unable to maintain. Request provide any clue.
    warm regards
    marias

    Hello friends!!
    The ordering unit maintained in purchasing view is not plant specific.... It is MARA table entry only!
    My requirement, when attempting PO for plant 1000,  default OUn should be KG, i case of plant 1100, it should be Ton.
    How to achieve the OUn specific to plant?
    Hope my query is clear.
    warm regards
    marias

  • Plant specific conditions in Vender Master record.

    Hi,
    I hv to maintain the plant specific data in Vendor, to do that when I go to Extras --> Alternative data, it shows in grey , and not able to enter the plant specific conditions,
    Now what to do ? How can I be able to enter plant specific data in vendor master.
    Regards
    BM
    Edited by: Biswajit Moitra on Apr 7, 2009 11:36 AM

    Hi,
    This could be because: Company code for which the Pur Org is assigned be different than the plant`s company code. And you are trying to change vendor by  XK02 for the incorrect "PurOrg/Company code" combination.
    you can try to assgin the plant you intend enter in vendor master to Pur Org in spro and then you`ll have the Alternative data field editable.
    rgds,
    Ganesh....

  • Plant specific vendor data

    Hi,
    In vendor master is it possible to maintain plant specific data for a vendor below the company code & Purchasing Org level?
    Ajay

    Hi,
    In addition to the data that is valid for a purchasing organization, you can maintain certain purchasing data or partner roles on a plant-specific or vendor-sub range-specific basis (for example, terms of payment or Inco terms that differ from those applicable to the purchasing organization as a whole).
    It is not possible to create all purchasing data in the vendor master record as different data. Certain data, such as the Subsequent Settlement indicator, can only be maintained at the purchasing organization level. However, there is certain important data that can only be created at plant level
    The data retention levels that are provided below the purchasing organization are defined in Customizing for the account group. The relevant setting is merely a default value. If no organizational levels below the purchasing organization are provided as data retention levels for purchasing, you can nevertheless create different data for other plants or vendor subranges in the vendor master record via Extrasu2192Add. Purchasing Data.
    regards,

  • Idocs for transferring Plant specific dasta

    Hi PP gurus,
    What is the transaction for transferring plant specific data through idoc.
    Regards,
    Pramod

    Hi Sriram,
    When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system
    Is it custom  segments .
    Regards,
    Madhu.

  • How to view execution history for any date in oracle SQL developer tool ?

    hi, i want to view some executed queries(2 months before) in oracle SQL Developer. if i press F8 it shows execution history for only last 30 days. is there any option(query) or something to view execution history for specific date ? i want to see some queries, which is executed before 2 months in my oracle SQL developer tool. Pls help me out.

    sb92075 wrote:
    943838 wrote:
    hi, i want to view some executed queries(2 months before) in oracle SQL Developer. if i press F8 it shows execution history for only last 30 days. is there any option(query) or something to view execution history for specific date ? i want to see some queries, which is executed before 2 months in my oracle SQL developer tool. Pls help me out.it will never occurWhy not? Are you a member of the product team that develops SQL Developer?
    To the OP, there is a forum for SQL Developer
    SQL Developer
    And there's also a sticky on the forum for product enhancement requests
    "Feature Requests, Extensions and General Collateral "
    Cheers,

  • Creation of Plant Specific Views while creating or changing the Material

    Hi,
    When saving a material (MM01/MM02), based on data in custom table, I have to extend the material for different plants and plant specific views such as
    1.     Purchasing
    2.     Foreign Trade Import
    3.     MRP1
    4.     MRP2
    5.     MRP3
    6.     Forecasting
    7.     Parts F&P Data (custom view)
    8.     Accounting 1
    How can I achieve this? Is there any FM or BAPI that can be used to extend material for a plant and its specific views?
    Also please suggest me the user exit or BADI which has to be used to achieve this functionality?
    Best Regards,
    Kumar

    We can use the BAPI, BAPI_MATERIAL_SAVEDATA to extend material to different views.

  • Material Master - Purchase order Text view as plant specific

    Is there any provision in standard SAP to make Material Master u2013 Purchase order Text view as plant specific.
    Example: Material Master u2013 Sales text view is sales org & Distribution channel specific and the sales text is unique of each of the sales org and distribution channel combination.
    i.e, if we change sales text for a sales org and distribution channel combination, it will not affect the sales text of another sales org and distribution channel combination.
    Similarly, can we make the Purchase order Text view as plant specific? How to achieve this?
    As of now, if we change the text for one plant, it will be affected to all other plants also.

    Hi Pankaj, thanks for the reply.
    The solution you have given is applicable if the info record PO text is used only in Purchase order?
    Moreover, we are not using plant specific info records.
    We want to use material master PO text for some other custom transactions.
    Please give your inputs.
    Thank you.

  • PLant specific status

    Hi all,
    How can we configure new plant specific statuses in the system.
    How can the plant specific ststuses can be made mandatory to be filled during material master creation.
    Is it possible to automatically populate a status(For eg ZM) at th time of creating a material.
    PLease help me.
    Karthick P

    Hi
    You can define the Plant specific status in OMS4 as suggested by Mr Vivek and also the settings are global but if you assign the same plant specific material status key in BD1 then for that material it will active on client level and if you assign in MRP1 view then it will active for specific plant only.Also you can do mandatory from T code OMS9> Field sele group 51 and maintain MARC-MMSTA as required entry for your material type wise.
    Correct me if am wrong.
    Regards
    Anupam Sharma

  • Plant Specific and X-Plant Material Status

    Hi,
    Could anyone please answer the following:
    1.What is the TCode to configure Plant Specific Material Status?
    2.Would there be any conflict if both X-Plant Material Status and Plant Specific Material Status can be configured together? My client would like to Stop Manufacturing in one plant and keep others unblocked.
    Thank you,
    Sam

    hi
    1.What is the TCode to configure Plant Specific Material Status?
    t code is OMS4 ,block the production tabs in the indicator
    2.Would there be any conflict if both X-Plant Material Status and Plant Specific Material Status can be configured together? My client would like to Stop Manufacturing in one plant and keep others unblocked.
    *if u want plant specific block then do not use this indicator in basic data 1 view ,use it in purchasing view *
    select the material in mm02 with plant and store then in pur view material plant status give this indicator
    regards
    kunal
    award if useful

  • Plant specific  configuration

    Hello friends;
    I want to delete material entered in the field "configurable material" under "plant- specific configuration" tab in mrp3 view. There is no any requirement for material.
    Please help me.

    Hi Kiran,
    You cant delete that.
    You need to create new material coz it is not editable.
    Only option is from debug mode delete thows entries , but i suggest you not to do that coz it can currpt database.
    Regards,
    Vishal

  • Old Number in Plant Specific Table- MARC

    Hi Experts,
    I understand that Old material number is at client level in Material master. Our client has 21 plants and each plant has its own legacy system. Hence they have different Old material numbers plantwise. This Oldmaterialnumber is to be tracked in the system, till cutover phase, since initial stock upload will be done based only on this. Is there any field in Purchasing or anyother Plant specific views, to populate this data. Ifany of you have come across this scenario, please let us know. We wish to avoid developments on this front.
    Thanks,
    Tushar/S. Satish

    classification is standard.
    you can create a class old material number
    and characteristic for each plant e.g. oldmatplant1234; oldmatplant 2345;
    so you finally have 21 characteristics in your class
    and you then enter the old material number to its corresponding characteristic.
    search via classification is a standard feature embedded into material search.

  • LSMW & Oil-specific data View

    Hi experts!
    This time I'm doing an LSMW for materials that have the Oil-specific data View. My LSMW is using the Bapi BAPI_MATERIAL_SAVEDATA and I can't find the corresponding fields for: UoM Group, Conv. Group, Excise duty group and Oil content. Is there any other BAPI that I should use ?? Or do I have to do my LMSW using a batch input ?
    I've seen every field of every structure of the Bapi I'm using, but no luck!
    Thanks in advance for your answers.
    Dev

    Hello,
    The technical names are:
    UoM Group = MARC-UOMGR
    Conversion Group = MARC-UMRSL
    Excise duty tax group for material = MARC-OITAXGRP
    Oil Content = MARC-OIOILCON.
    I found these fields in the MARC table, but when i look for them in the BAPI tables, I just can't find them. So I wonder If I have to make a batch input instead of using this BAPI ?
    Thanks in advance.
    Dev.

  • Plant Specific Screen Selection Customization

    Hi friends,
    I have a question, I've made a change in the related customization step.
    IMG-> Logistics-General u2013> Material master -> Field Selection -> Define Plant specific field selection and plant specific screen selection
    I deleted one of the status in the field of "maintenance status and "KDEVALBPQSZXCFG" strign became "KDVALBPQSZXCFG"
    (In the line for a specific plant, not all plants)
    The status was "E" and I would like to learn the effect to that change.
    First I expected the system not to allow me to create purchasing view of a material in MM01.
    It allowed indeed. Also it didn't asked me to enter an organizational unit like plant.
    Meanly, I created a material's purchasing view without entering any plant.
    Then I reversed the customization and added "E" to where it belonged before and the string became again  "KDEVALBPQSZXCFG". I tried to create a material again. However the system again didn't asked me any plant.
    How can I bring back the old settings? Should'nt this reverse customization normally bring back it?
    Thanks for your help in advance.
    Best regards,
    Yusuf Gezer

    Hi Sudhi,
    yes I am able to make changes through MM02 for this view, purchasing.
    By the way I think I just found the solution.
    I don't know but somehow during the customization, a check box became active, I realized it while creating a material.
    And it remained as checked even if I made the reverse customization.
    The explanation for the check box: "It is an indicator that causes the data you have entered to be valid for all material master records from this date onwards; the window for entering organizational levels and profiles is redisplayed only on request."
    This lies on the organizational level screen, I saw it when I manually selected that screen.
    It seems there is no problem now.
    Thank you for your interest.
    Best regards,
    Yusuf Gezer

Maybe you are looking for