BAPI_NETWORK_COMP_ADD: add a material with purchase type

Hi folks,
Please, how can I add a material for a network activity with Purchase Type = "Purchase requisition for network"?
When I add a material only Purchase Type = "Reservation for network" is possible. On solution can be fill out the fields Account Assignment Category and Consumption Posting, but I don't know what fields in the table BAPI_NETWORK_COMP_ADD (I_COMPONENTS_ADD) I must to use.
Thanks for any help.

Hi,
Once the activity is released the customer requirement is to add the components in the same activity at regular intervals.I can not help it.
But some way has to be there
Regards,
Nishant

Similar Messages

Serial Number creation for a material with stock type

Hi,
I am not able to create the serial number for a material which should have valuation type, plant and storage location using the function module ITOB_SERIALNO_CREATE_SINGLE.
There is no export or changing parametre for this function module for Valuation type(EQBS-LBBSA),
Plant(EQBS-B_WERK) and
Storage Location(EQBS-B_LAGER)
Can any one suggest me the BAPI or function module to create a serial number for a material with valudation type, plant and storage location rather tan going for BDC to transaction code IQ01.
(Note: We can create the serial number with valuation type manually using the transaction code "IQ01" for agiven material.)
For suitable answers would be rewarded.
Regards
Badari
Edited by: badari Narayana on Feb 10, 2008 5:20 PM

I have the solution below.
- Don't change Serial no. profile
- Goods issue all stock with mvt 201 or 261 into temporary cost object and note your text.
- Change Serial no. profile in material master
- Goods receipt all stock (You may ref. material doc.) and you need to input serial number for all materials.
Hope this solution can help you.
Edited by: Saiyaman on Dec 9, 2009 5:33 PM

Purchase Order is generated after MRP for Material with MRP Type ND

Hi Everyone,
Material type := HAWA
My material procurement type = F i.e. External Procurement.
MRP Type = ND in Production server , and VB in Quality
Lot Size = EX
Material Status :- 15 Pre-release both for Quality and production server
The Material is bulk material and bulk material indicator is set.
Purchasing View is also maintained for the same.
Planning Strat = Z5 Company specific
Special procurement key:- Z7 Company specific
I am running MD02 with following parameters.
Create Pur Req =1, PR
Create MRP List = 1, MRP List
Delivery Schedule = 3, Schedule Lines
Planning Mode = 2 Re- Explode BOM & Routing
Scheduling = 1
Issue:
After MRP run, system is generating PR, Though with MRP type ND purchase requisition should not be generated.
Observation:- Looks like there is inconsistency of material date in Quality and production server.
When I tried to run the planning , The Error message was generated"Material status is set to pre- release.
After changing the material status to 20 (Active ) , when we run the MRP , The error message is generated "Material is not planned automatically "
We havent been able to locate the root cause so far
Please guide us
Thanks in Advance,
Ayaz
Edited by: Ayaz Alam Khan on Feb 16, 2011 2:41 PM

IF the material is ND, system won't Run MRP for the material
Observation:- Looks like there is inconsistency of material date in Quality and production server.
There is no link
When I tried to run the planning , The Error message was generated"Material status is set to pre- release.After changing the material status to 20 (Active ) , when we run the MRP , The error message is generated "Material is not planned automatically "
system will read the X plant material status or plant specific material status first and then only system will read MRP type

Report on material with inspection type

Hi,
is there any report which can show which material is assigned to which inspection type.
regards
Raj

Dear Raj
1 ) Make use of QA08.
2) Give the plant and choose in the TAB Deactivate inspection Type
3) Maintain the inspection type 01 or 04 .
4) Execute
5) It will give you a list of material for which inspection types are assigned.
you can even assign inspection type in mass through this
hope this helps
Regards
Gajesh

Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

Hi,
I am working with MTO scenario.
I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
Below steps are being follow:
Scenario is MTO ( special stock subcontracting)
1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
2. RM code - 61, available stock 100 TO & batch no.0000000127
3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
5. Item Data details tabs are blank.---This is the issue / error.
Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
Please have a look on attachment for SAP screen issue.
Regards
Mohit Jaiswal

Hi Mohit ,
please check below link , you need to perform steps as given
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
also see the sales order subcontracting using the business addon
http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

Print document type Q02( technical delivery terms) with Purchase Order

Hi all
1) I have activated the QM procurement for a certain material and I have assigned the control key that makes mandatory the technical delivery terms on the material master (standard control key 0002).
2) I have created a Document Info Record Q02 to hold the Technical Delivery Terms assigning a PDF file. Document is released.
3) I have assigned the DIR to the material master (object link in the DIR).
I would like to know how to print the this DIR with Purchase Order. I am testing this scenario in IDES system and the form does not get printed.
Could anyone please advice how to get the PDF file printed with the purchase order?
Thank you

Hi Sappmqm,
There is no internal way, you would have to create an ABAP program to handle this function, where it would search the material record to pull the DIRs linked and then open them on user's screen for printing.
Additional SAP add-ons are available as 3rd party apps, can click my name and contact me for more detail if you like.
Good luck.

Creation of Material Master for a material with Material Type NLAG

Hello Sirs,
I have to create a material which will be consumed directly. I would use the
material type NLAG (Non stock material). If I create a material with this material type, will it contain an Accounting view where in I can maintain the price of the
material? If it contains an Accounting view, which type of Price control should be
used (Moving average or Standard)? Further, can we maintain an info record for
a material with material type NLAG?How the price updation happens?
Regards
Yoga

Hi Madhu,
Thanks for your reply. But, I have one more doubt. For non stock materials, we
will specify the cost centre and G/L account at the time of creation of Purchase order. Then, do we have to specify the valuation class at the time of creation of
Material Master since there is no automatic account determination?
Regards
Yoga

Link of material movement with inspection type

Hello Masters,
I have scenario where component at shop floor will be segregated for inspection. The requirement is to do result/defect recording for those parts and if required then those parts need to be scrapped. So one way of doing that can be to move those parts to either blocked stock or QI stock (ideal option) or to specific storage location so that planning can be taken care of (if material are still in unrestricted then planning will consider those part as OK part and planning may fail). And to record result/defect we require inspection lot, which can be created by using above mentioned material movement.
But problem is how to create inspection lot so that we can do result/defect recording for those materials and scrap those material.
Please note that material master will have QM setup active (inspection type 01 - Goods Receipt Insp. for Purchase Order) and hence we can move material from unrestricted stock to QI stock only through QM.
I am not sure if we should use inspection type 08 - Stock transfer inspection, as there can be many instances of material transfer within plant. And with inspection type 08 active, system will create inspection lot every time there is any material transfer.
One way can be to create new goods movement only for this kind of transfer and new inspection type and link both together. So that when ever material is transferred using that particular goods movement, system creates inspection lot as well as material will be in QI stock. But I am not sure how this is possible or not and if yes then how this can be done.
I know query was too long to read and I think I was clear enough to explain what the requirement is.
It would be great if I can get some guidance from you masters at the earliest convenience as it is bit of importance.
Thanks and regards,
Devang

Hi Devang,
I guess this is Line rejection scenario. Correct me if understanding goes wrong. You have okayed the material against 01 inspection lot and UD has been given. Now you find this material defective on shop floor.
I think the 2nd option suggested by marwadi sounds better. I suggest one more possibility, just check whether feasible.
1.     Create quality notification Q2 type through QM01. While creating you can give references of original PO and material document, which fetch vendor name and material code automatically.
2.     Record defects and all other required information in notification.
3.     After this, you find an option in action box, transfer post unrestricted - >block . Click there. This will transfer the stock from unrestricted to block.
4.     If you want planning persons should not consider this stock as OK, remove block stock from MRP stock availability check. As a result of which stock lying in block will not be considered as available stock.
5.     From block stock you can send this material back to vendor through MIGO. Otherwise you can create return delivery from notification through action box also. Check what is feasible in your case.
Here you need not create inspection lot, no need to use any user exit.
Regards,
Anand Rao

Changing material type for material with history

We needed to change the material type for an existing item with purchasing, inventory and sales history from HAWA to UNBW. We are trying to PGI the first receipt since the change, and are receiving an Account Determination error .
When I look at the material master set-up, I still see records in the MBEW table. UNBW items that are set-up that way from scratch do not have any records in this table. Is this what is driving my error?
I'm guessing that if it is not, there will be some discrepancy between the material, vendor, and capital asset order.
Any insight is appreciated.

even UNBW can have accounting views.
The problem is probably that you just changed the material type and did not change the valuation class in the accounting view accordingly. remove it, and try again.

Restriction of purchase order with valution type

Dear,
I want to restrict the valution type with the document type of purchase order type,
Can i do it?
E.g
My valution type is Fg-dom,
I want to use this valution type in stock transfer order ,
Restrict in other doc.type

Hi ,
Valuation type is defined for material.In standard setting we can't restrict a purticular val.type to a PO document type.
A material with a valuation type, can be used for any purchasing document type.
For the better understanding of users You can define a PO document type with ZDOM for domestic.
And advise them to use that document type for the material procurement with valuation type Fg-dom.
Let me know you are ok with this.
reg.
Mariappan

DMS link with Purchase order,invoices and material master

Hi, all,
Here is my ?
Can we link incoming material invoice with purchase orders for reference purpose throught DMS.
rgds,
ben

hi
you can link the objects through object link in dms.
go to tcode dc10 select the documnet type, click on define object link. click new entry and select object type as EBAN/EKPO
this way dms is link to purchase order.
thanks ,
regards,
nitin
award point if useful

221 movement type with Purchase Order Field mandatory in MIGO

Hi,
When i enter , 221/261 movement type in SAP in MIGO screen .
What is the way to make purchase order field should displayed ? in SAP
Regards,
Rajendra D. Sawant

can you please explain the business need of getting a Purchase order number for while issuing the material with 221 /261
i have also checked in OMJJ eventhough the field EBELN is available in field catalouge but by adding it in OMJJ in 221 the screen does not appear there & probably the reason is that SAP does not support the need of that field there
IF at all you want to get a PO field in Screen then first copy 221 to create a new movement type and then look for some screen exit and enhance the table of MSEG/MKPF with a custom field by appending a structre.
Edited by: Sap: IN on Oct 17, 2011 11:45 AM

Enhance purchasing datasource with movement type

Hi
I need to enhance purchasing data source with movement type ( BWART). Can you please suggest me if any standard datasource ( Purchasing ) having this info. I can see that field is present in EKBE table, but how to link EKPO and EKBE table as there are many keys in EKBE table.
Regards
Kamal

Hi
you need to check the requirement first prior to addressing this issue.
Purchasing Document will not have the Movement type field. It exists in the Inventory transaction.
Table EKBE is the History table for Purchase documents. IF you check this table carefully you will see that the Material documents against every Purchase document are stored in this table. The Movement type field in the EKBE table refers to the Material document.
So if you try to link BKART with Purchasing document # then you may have one or more than one BKART number against one Purchasing document.
If yoou need the Purchasing document with BKART then it is essential to consider all the keys in EKBE.
Cheers
Umesh

Can't create Inbound Delivery for PO with Packing type material -- HU

Hi friends,
I create a new packing material, and maintain packing material type. And then create a PO but I can't create an inbound delivery by VL31N.
The error message:
No item category exists (Table T184L EL VERP V )
Message no. VL320
Diagnosis
There is no item category available in item category determination in the delivery (table T184L) for the following entries: EL VERP V
I tried to add new item by SM30 with T184L, but still more errors. So it doesn't mean there are erros with delievery type determination.
Any help?
Thanks,
Bruce
Edited by: Bruce Hu on Jan 10, 2008 7:53 AM

Hi Anil,
Welcome to SCN for your first post. Did you check with your functional people about this.
Regards,
Madhu.

Find Material Document with Movement type 103 for material document 105

Hi experts,
In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
Regards,
Abdullah

Hi,
you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
Regards,
Chaitanya

BAPI_NETWORK_COMP_ADD: add a material with purchase type

Similar Messages

Maybe you are looking for