BAPI or BDC Program For Contracts VA41,42

Hi all,
send me BDC or BAPI programs for Contracts VA41.
I fond some sample coding by searching in SDN but they looks like a single paragraph can't split that.
Thanks & regards,
Arun.

Hi,
Use BAPI BAPI_CONTRACT_CREATEFROMDATA. For coding, you don't have to search. Just read the FM documentation. Thats enough for coding.
Try to search for where used list of this BAPI. If you are lucky enough, you can get the sample code as well.
Thanks,
Vinod.

Similar Messages

  • BAPI or BDC Program For pricing VK11

    Hi All,
       Is there any standard program for pricing VK11 using batch input or send me some coding on Bapi or BDC.
    Thanks in Advance.
    Arun.
    Edited by: Arun Kumaran on Dec 24, 2009 11:40 AM

    Hi,
    You can go for BAPI "BAPI_PRICES_CONDITIONS " instead of a BDC.. you could have search in forums first for these type of questions any ways
    See the link below..
    BDC (VK11)
    regards,
    NZR

  • BAPI or FM or Standard BDC program for Production version creation (C223)

    Hi All,
    Is there BAPI or FM or Standard BDC program for Production version creation?  Please help me.
    Thanks & Regards
    Santhosh

    Hi,
    Try this FM "CO_OCM_CREATE_PROD_VERSION"
    Regards,
    Smart

  • Problem in creating a BDC program for transaction cj20n(project sytem)

    Hi all,
    I am trying to create project,WBS element ,network and activity using a BDC program,
      I am able to create to a recording for the transaction cj20n using tcode shdb but when i run the recording it doesnt run properly i am not able to create any thing.
    I get error saying that a particular field doesnt exist on the screen.
    Is possible to create a BDC program for transaction CJ20N ?
    Also is there any other alternative  apart from using a BAPI or a function module.
    Thanks,
    Nishant

    Hi,
        Check below link for BAPIs of transaction cj20n.
    [BAPI for cj20n|BAPI for CJ20N transaction]
    Thanks,
    Asit Purbey.

  • Please  Help me How write the BDC program for the MIGO inbound Delivery

    Please help me how to write bdc program for the MIGO Inbound Delivery in 4.7EE Version. Please help me.
    Not in LSMW.  Required call transaction or Session Method. Please help me.
    Mohan

    Run transaction BAPI . Select Logistics Execution/Shipping/InboundDelivery/SaveReplica.. You can use function module BAPI_INB_DELIVERY_SAVEREPLICA in your ABAP program.

  • Need to write BDC program for Transaction VA01(Sales order creation)

    Dear Friends,
    I need to write a BDC program for uploading data into sap from an excel sheet file. The data contain Material Description,Customer Name,Date of Delivery,Quantity,Unit of measure etc.
    material desc customer date of delivery quantity unit of measure
    abcdf xyz ltd 24.12.2011 2 4 gm
    The transaction is VA01.How will I find the correct fields and related tables? What are the related fields needed in the transaction VA01.
    Thanking you
    Sacheen Pukhrambam
    Moderator Message: Put some self-effort before posting your question. Thread locked.
    Edited by: Suhas Saha on Nov 25, 2011 1:25 PM

    Hello,
    You could try using a BDC with VL04 but first preference would be to see if there are any BAPI functions (search for BAPI) that can do this.
    If BUS2032 doesn't have an attribute that you want (eg shipping point) then sub-delegate to ZBUS2032 and add the attribute, it's straightforward. You just have to know how to determine the value programmatically.
    regards
    Rick Bakker
    hanabi technology

  • BDC program for inbound delivery VL31

    Dear experts,
    I have created BDC program for inbound delivery with old T_CODE VL31,but it's very inefficient.Now I must change the program for the efficiency improve.
    Could you give any idea?
    Thanks in advance,
    collysun.

    I'm sorry, but it does not seem that there is a BAPI for this (looking at transaction BAPI and business object BUS2015).
    Have you perhaps looked at the new transaction VL31N? Are there any differences that may improve the input (limit the number of BDC steps)?
    Otherwise, take a look at the way you are entering data now. Make sure there are not too many dialog steps. i.e. Make sure you enter all the data you can on a single screen, only then process the next OKCODE. Also, look at the transaction again: Perhaps you can enter items in an overview screen instead of individual items. (I have no knowledge of your situation of course; these are just some general guidelines).
    Cheers,
    Martin

  • BDC Program for posting FI document

    Hi everyone!
    Anyone out there already made a BDC program for posting FI documents with this concept:
    User will upload a spreadsheet file with the line items per row
    User will input which TCODE user will use for posting
    BDC program will then post the document using the line items in the spreadsheet file
    I need to make a BDC program with that concept but having a hard time to think of a good algorithm to make my program very flexible.
    Thanks!

    you can use batch input program RFBIBL00 to pasrk document. Please check these links for more information.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADM/CAGTFADM-FI.pdf
    http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/CAGTFADM-FI.pdf
    Have a processing routine defined for the specific Idocs that come into SAP.
    So, as and when the idocs are in, the routine triggers and you can codeappropriately in the routine for parking the idocs.
    Check these threads
    BAPI For Parking FI Document
    Post FI Parked Documents
    You can use message type INVOIC, IDoc Type INVOIC01/02 with process code INVF (FM IDOC_INPUT_INVOIC_FI) for FBV1 transaction.
    See if there are any BAPI/FMs for parking an FI document.
    1.. Use INVOIC01 IDOC with INVF process code (This works for Vendor Line Items only). I read the documentation somewhere that, this would work even if the line items are > 999
    2.. BAPI_ACC_INVOICE_RECEIPT_POST (This works for Vendor Line Items only)
    3.. BAPI_ACC_DOCUMENT_POST (Tax jurisdiction allocation not calculated properly)
    4.. BAPI_ACC_GL_POSTING_POST (No tax line items allowed for this BAPI)

  • BDC program for ME29N.

    i have created a BDC program for ME29N, it is working in process level but it is not working while executing it.
    how can i solve that? pls give me a sample code.....

    Hi,
       You can use this BAPI's instead of BDC's for your ME29N Transaction.
    1) BAPI_PO_RELEASE -- This method is to release Purchase Order.
    2) BAPI_PO_GETRELINFO -- Detailed Release Information on Purchase Order
    3) BAPI_PO_GETITEMSREL -- List Purchase Orders for Release
    Regards,
    Sudhakar Reddy.A

  • Bdc program for pre condition allocation in ct04

    dear sir
    we have created dependencies for preconditions in variant configuration.
    now we have to link these dependencies between the charecteristics and values
    can we make BDC program for uploading the data ?
    because data content is huge and takes more time.
    if so what is the procedure?
    thanking you
    srinivas

    Dear Srinivas,
    There is no standard BDC or BAPI. However, there are few standard FMs that you can use.
    CTMV_CHARACT_CHANGE - RM: Characteristics Maintenance
    CTMV_CHARACT_CHANGE_KNOWL - RM: Characteristics Maintenance
    CTMV_CHARACT_CHANGE_KNOWL_VAL - RM: Characteristics Maintenance
    CTMV_CHARACT_CHANGE_OVERWRITE - RM: Characteristics Maintenance
    CTMV_CHARACT_CHGE_KNOWL_OVWR - RM: Characteristics Maintenance
    CTMV_CHARACT_CHGE_KNOWL_VAL_OV - RM: Characteristics Maintenance
    CTMV_CHARACT_CHGE_TEXT_OV - RM: Characteristics Maintenance
    CTMV_CHARACT_DELETE_ALL_ALLOC - RM: Characteristics Maintenance
    CTMV_CHARACT_DELETE_NEUTRAL - RM: Characteristics Maintenance
    CTMV_CHARACT_DEL_TEXT_OV - RM: Characteristics Maintenance
    CTMV_CHARACT_INIT - RM: Characteristics Maintenance
    CTMV_CHARACT_RENAME - RM: Characteristics Maintenance
    CTMV_CHARACT_SAVE - RM: Characteristics Maintenance
    CTMV_CHECK_CHARACTERISTIC - RM: Characteristics Maintenance
    CTMV_CHECK_CHARACTERISTIC_OVWR - RM: Characteristics Maintenance
    You can find more:
    Go to transaction SE80 -> enter CTMV -> Expand Function Modules option.
    Application Programming Interfaces:
    CAMA_CHARACT_MAINTAIN - APIs Maintain Characteristics
    CAMA_CHARACT_SAVE - APIs Maintain Characteristics
    CAMA_CHAR_ALLOCATE_GLOB_DEP - APIs Maintain Characteristics
    CAMA_CHAR_DEL_DEP - APIs Maintain Characteristics
    CAMA_CHAR_MAINTAIN_DEP - APIs Maintain Characteristics
    CAMA_CHAR_SNGL_MAINTAIN - APIs Maintain Characteristics
    CAMA_CHAR_VAL_ALLOCAT_GLOB_DEP - APIs Maintain Characteristics
    CAMA_CHAR_VAL_DEL_DEP - APIs Maintain Characteristics
    CAMA_CHAR_VAL_MAINTAIN_DEP - APIs Maintain Characteristics
    Regards,
    Naveen.

  • BDC Program for Sales order and Enquiry

    Hi All,
    Pls can you help me.
    To create sales order and enquiry I have bapis .
    BAPI_SALESORDER_CREATEFROMDAT2
    BAPI_INQUIRY_CREATEFROMDATA2
    but i want BDC Programs for that bapis
    pls can you help me
    thanks
    mars

    Hi Krishna ,
    Please check the below links .
    [http://www.sap-basis-abap.com/abap/bapi-sample-to-upload-data-from-flat-file-to-va01.htm]
    [http://abapreports.blogspot.com/2008/06/bapi-sample-code-for.html] -- > Select and Copy from this one.

  • How to create a BDC program for given recording.

    i have to create a BDC program for uploading a file.
    currently i am using call function
      CALL FUNCTION 'F4_FILENAME'

    just check out the code below  it  is  for  updating two transactions
                           types Declaration                      *
    types: begin of t_tab1 ,
                vendor(10),
                material(18),
                pur_org(4),
                wglif(18),
          end of t_tab1.
                  Data Declaration                                 *
    data : begin of it_tab5 occurs 0,
              vendor(10),
              material(18),
             end of it_tab5.
    **DATA : BEGIN OF IT_TAB6 OCCURS 0,
             VENDOR(10),
             MATERIAL(18),
            END OF IT_TAB6.
    data: it_tab1 type standard table of t_tab1 with header line.
    data: wa_tab1 type t_tab1.
    data: wa_tab2 type t_tab1.
    data: it_tab3 like bdcdata occurs 0 with header line.
    data: it_tab4 like bdcdata occurs 0 with header line.
    data: it_tab2 type table of bdcmsgcoll with header line.
    data: d_file_name like ibipparms-path,
          d_file_name1 type string.
                       Start-of-selection                        *
    start-of-selection.
    FM for finding the flat file
      call function 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME        = SYST-CPROG
      DYNPRO_NUMBER       = SYST-DYNNR
      FIELD_NAME          = ' '
       importing
         file_name           = d_file_name.
      d_file_name1 = d_file_name.
    ******FM for uploading data from flat file into internal table
      call function 'GUI_UPLOAD'
        exporting
          filename                      = d_file_name1
         filetype                      = 'ASC'
      HAS_FIELD_SEPARATOR           = ' '
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
        tables
          data_tab                      = it_tab5
    exceptions
       file_open_error               = 1
       file_read_error               = 2
       no_batch                      = 3
       gui_refuse_filetransfer       = 4
       invalid_type                  = 5
       no_authority                  = 6
       unknown_error                 = 7
       bad_data_format               = 8
       header_not_allowed            = 9
       separator_not_allowed         = 10
       header_too_long               = 11
       unknown_dp_error              = 12
       access_denied                 = 13
       dp_out_of_memory              = 14
       disk_full                     = 15
       dp_timeout                    = 16
       others                        = 17.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
                     End-of-selection                         *
    end-of-selection.
      sort it_tab5 by vendor.
      loop at it_tab5.
        perform bdc_dynpro using 'SAPLBG00'  0101 .
        perform bdc_field using 'BDC_OKCODE' '/00' .
        perform bdc_dynpro using 'SAPLBG00'  1000 .
        perform bdc_field using 'BDC_OKCODE' '=BUCH' .
        perform bdc_field using 'BDC_SUBSCR'
        'SAPLBG00                                1101KOPF_1000'.
        perform bdc_field using 'GBGMK-GAART' '2' .
        perform bdc_field using 'GBGMK-GAERB' 'X' .
        perform bdc_field using 'BDC_SUBSCR'
          'SAPLBG00                          1103TAB_SUB_1000'.
        perform bdc_field using 'BDC_CURSOR' 'GBGMP-LSTNR(01)' .
        perform bdc_field using 'GBGMP-LSTNR(01)' it_tab5-material .
       call transaction 'BGM1' using it_tab3 mode 'E' messages into it_tab2
        refresh it_tab3.
        wa_tab1-pur_org = 'ABCP'.
        loop at it_tab2.
        endloop.
        perform bdc_dynpro using 'SAPMM06I'  0100 .
        perform bdc_field using 'BDC_CURSOR' 'EINE-EKORG' .
        perform bdc_field using 'BDC_OKCODE' '/00' .
        perform bdc_field using 'EINA-LIFNR' it_tab5-vendor .
        perform bdc_field using 'EINA-MATNR' it_tab5-material .
        perform bdc_field using 'EINE-EKORG' wa_tab1-pur_org .
        perform bdc_field using 'RM06I-NORMB' 'X' .
        perform bdc_dynpro using 'SAPMM06I'  0101 .
        perform bdc_field using 'BDC_CURSOR' 'EINA-WGLIF' .
        perform bdc_field using 'BDC_OKCODE' '=BU' .
        perform bdc_field using 'EINA-WGLIF' it_tab2-msgv1 .
        call transaction 'ME12' using it_tab3 mode 'E'.
        refresh it_tab3.
        refresh it_tab2.
      endloop.
    *&      Form  BDC_DYNPRO
         Start new screen
         -->P_FNAM  text
         -->P_FVAL  text
    form bdc_dynpro  using   program
                             dynpro.
      clear it_tab3.
      it_tab3-program  = program.
      it_tab3-dynpro   = dynpro.
      it_tab3-dynbegin = 'X'.
      append it_tab3.
    endform.                    " BDC_DYNPRO
    *&      Form  BDC_FIELD
       Insert field
         -->P_FNAM  text
         -->P_FVAL  text
    form bdc_field  using    fnam
                             fval.
      clear it_tab3.
      it_tab3-fnam = fnam.
      it_tab3-fval = fval.
      append it_tab3.
    endform.                    " BDC_FIELD
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 6:20 PM

  • What is the bdc program for vendor master?

    what is the bdc program for vendor master?

    Hi,
    Find the code here.
    And do create your text file data in the order of itab structure.
    {report ZBDC_XK01
           no standard page heading line-size 255.
    data: bdcdata like bdcdata occurs 0 with header line.
    data: begin of itab occurs 0,
    lifnr like lfa1-lifnr,
    bukrs like RF02K-bukrs,
    ekorg like RF02K-ekorg,
    ktokk like RF02K-ktokk,
    anred like lfa1-anred,
    name1 like lfa1-name1,
    sortl like lfa1-sortl,
    land1 like lfa1-land1,
    spras like lfa1-spras,
    waers like lfm1-waers,
    end of itab.
    selection-screen begin of block blk1 with frame.
      parameters: p_file like rlgrap-filename OBLIGATORY.
    selection-screen end of block blk1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      perform f4_help_p_file.
    start-of-selection.
      perform get_data.
      perform upload.
    END-OF-SELECTION.
    *&      Form  f4_help_p_file
          text
    -->  p1        text
    <--  p2        text
    form f4_help_p_file .
    data: v_file like p_file.
      CALL FUNCTION 'F4_FILENAME'
        IMPORTING
          file_name = v_file.
      CHECK sy-subrc EQ 0.
      p_file = v_file.
    endform.                    " f4_help_p_file
    *&      Form  get_data
          text
    -->  p1        text
    <--  p2        text
    form get_data .
    data: s_file type string.
      s_file = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = s_file
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
       DAT_MODE                      = 'D'
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
      tables
        data_tab                      = itab
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    stop.
    ENDIF.
    endform.                    " get_data
    *&      Form  upload
          text
    -->  p1        text
    <--  p2        text
    form upload .
    loop at itab.
    perform bdc_dynpro      using 'SAPMF02K' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RF02K-LIFNR'  itab-lifnr.
    perform bdc_field       using 'RF02K-BUKRS' '0001'.
    perform bdc_field       using 'RF02K-EKORG'  '1000'.
    perform bdc_field       using 'RF02K-KTOKK' '0001'.
    perform bdc_dynpro      using 'SAPMF02K' '0110'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-SPRAS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'LFA1-ANRED' itab-anred.
    perform bdc_field       using 'LFA1-NAME1' itab-name1.
    perform bdc_field       using 'LFA1-SORTL' itab-sortl.
    perform bdc_field       using 'LFA1-LAND1' itab-land1.
    perform bdc_field       using 'LFA1-SPRAS' itab-spras.
    perform bdc_dynpro      using 'SAPMF02K' '0120'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_dynpro      using 'SAPMF02K' '0210'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB1-AKONT'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0215'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB1-ZTERM'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0220'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB5-MAHNA'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0310'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFM1-WAERS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'LFM1-WAERS' itab-waers.
    perform bdc_dynpro      using 'SAPMF02K' '0320'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-LIFNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_dynpro      using 'SAPLSPO1' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=YES'.
    call transaction 'XK01' using bdcdata mode 'A'.
    refresh bdcdata.
    clear itab.
    endloop.
    endform.                    " upload
    *&      Form  bdc_dynpro
          text
         -->P_0126   text
         -->P_0127   text
    form bdc_dynpro  using   program dynpro.
    clear bdcdata.
      bdcdata-program  = program.
      bdcdata-dynpro   = dynpro.
      bdcdata-dynbegin = 'X'.
      append bdcdata.
    endform.                    " bdc_dynpro
    *&      Form  bdc_field
          text
         -->P_0316   text
         -->P_0317   text
    form bdc_field  using    fnam fval.
    clear bdcdata.
      bdcdata-fnam = fnam.
      bdcdata-fval = fval.
      append bdcdata.
    endform.                    " bdc_field}
    Reward points if you find it helpful
    Thanks,
    Prasanna

  • ENTRY_ACT field in BDC program for Txn. IA05

    Dear Gurus,
    I want to write BDC program for IA05 transaction.  In that, Inspection Charatertics entries, I want to add more entries (more than one page - page down).  Please guide me how to handle RQPAS-ENTRY_ACT screen field.
    Please provide the logic in writing, if possible.
    Regards,

    Hi,
    I am having same problem.
    Can you give me the code as it shows solved at your end..
    -Maharshi

  • BDC Program for table control

    Hi Friends,
    I have an issue i am stuck here,
    i have to create BDC Program for XK01 tcode,
    and my requirement is that,
    i have three users first user want only three colum and second user want four column
    and third user want five column in table control,
    so how could i achieve it,
    please hekp me out.
    Thanks
    Vikash

    Hi Vikash,
    FORM bdc_dynpro  USING  p_program p_dynpro.
    IF user-one.
    FORM bdc_field  USING  fnam1 fval.
    FORM bdc_field  USING  fnam2 fval.
    FORM bdc_field  USING  fnam3 fval.
    ELSEIF user-two.
    FORM bdc_field  USING  fnam1 fval.
    FORM bdc_field  USING  fnam2 fval.
    FORM bdc_field  USING  fnam3 fval.
    FORM bdc_field  USING  fnam4 fval.
    ELSEIF user-three.
    FORM bdc_field  USING  fnam1 fval.
    FORM bdc_field  USING  fnam2 fval.
    FORM bdc_field  USING  fnam3 fval.
    FORM bdc_field  USING  fnam4 fval.
    FORM bdc_field  USING  fnam5 fval.
    ENDIF.
    Does this make sense?
    regards,
    Archer.

Maybe you are looking for