BAPI or FM for FCH6.

Hi Team,
Is there any Function module for FCH6.I want to update Company code,House bank Id,Account ID, Check Number,and Encashment Date.Please help me.
Thanks and Regards,
Shakeer

HI,
Go to package FBZ there u can find fphr function group . that is related to check management . There you can find related function modules.
list of function module in that function group are
i hope below function module will help you.
*PAYRCHECK_CHANGE_STATUS_*
other function modules :
PAYR_DISPLAY_PAYROLL_CHECK
PAYR_EXCHANGE_PAYROLL_RESULT
PAYR_INSERT
PAYR_PRINT_CHECKS Massendruck von Schecks mit Scheckmanagement
PAYR_REMIT_CHECKNUMBER_GET Ermittlung der Schecknummer zu einem 'third party remittance' Eintrag
PAYR_REPLACE_BY_MANUAL_CHECK Scheckinformation durch manuellen Scheck ersetzen
PAYR_REPRINT_CHECKS Massendruck von Schecks mit Scheckmanagement
PAYR_SELECT_FOR_PAYROLL_RESULT Lesen aller Schecks zu einem Abrechnungsergebnis
PAYR_VOID_ISSUED_CHECKS Entwerten von ausgestellten Schecks
Regards,
karthikeyan k s
Edited by: karthikeyanks on Nov 16, 2010 1:23 PM

Similar Messages

BAPI OR RFC FOR CREATION OF MASTER DATA

Hi
I want BAPI or RFC for master data creation,(Vendor,Customer,material,Service master)
Vendor(MK01)
Customer(XD01)
Material(MM01)
Service Master(AC01)
Pls Help me on this
Regards
Rajan

Hi ,
For material
BAPI_MATERIAL_SAVEDATA
For service
BAPI_SERVICE_CREATE

FBE2: BAPI or FM for Changing and Deleting Payment Advice

Hi,
I am looking for BAPI or FM for changing & deleting payment advice as we can accomplish from FBE2.
This is EC 6.0 upgrade issue for not be able to post using CALL TRANSACTION in background mode.
I tried the below FM's in the Function group FARMATCH, but all have them have the follwing code to select payment advice Header Table [AVIK].
SELECT * FROM AVIK INTO TABLE LT_AVIK WHERE (LT_WHERE) AND
                                              AVSID LIKE '09%'.    "This is not the case for my requirement
FARMATCH_CHANGE_PAYMENT_ADVICE
FARMATCH_DELETE_PAYMENT_ADVICE
I found another set of FM's REMADV_CHANGE & REMADV_DELETE but I am not sure if i can
achieve the same functionality of change and delete that we can do using FBE2.
If anyone had similar scenario, Appreicate your feedback.

Below is a sample code.
I am able to delete the details....
Take a look...:)...imp to add wait for few seconds
REPORT z.
PARAMETER: vbeln TYPE vbak-vbeln.
PARAMETERS: fplnr TYPE fplnr.
DATA: t_zfpla TYPE STANDARD TABLE OF fplavb WITH HEADER LINE.
DATA: t_zfplt TYPE STANDARD TABLE OF fpltvb WITH HEADER LINE.
DATA: t_fpla_new TYPE STANDARD TABLE OF fplavb WITH HEADER LINE.
DATA: t_fpla_old TYPE STANDARD TABLE OF fplavb WITH HEADER LINE.
DATA: t_fplt_new TYPE STANDARD TABLE OF fpltvb WITH HEADER LINE.
DATA: t_fplt_old TYPE STANDARD TABLE OF fpltvb WITH HEADER LINE.
*DATA fplnr TYPE fplnr.
IF NOT vbeln IS INITIAL.
SELECT SINGLE rplnr INTO fplnr FROM vbak WHERE vbeln = vbeln.
ENDIF.
CALL FUNCTION 'BILLING_SCHEDULE_READ'
EXPORTING
    fplnr = fplnr
TABLES
    zfpla = t_zfpla
    zfplt = t_zfplt.
LOOP AT t_zfpla.
MOVE-CORRESPONDING t_zfpla TO t_fpla_old.
t_fpla_old-updkz = 'D'.
APPEND t_fpla_old.
ENDLOOP.
LOOP AT t_zfplt.
MOVE-CORRESPONDING t_zfplt TO t_fplt_old.
t_fplt_old-updkz = 'D'.
APPEND t_fplt_old.
ENDLOOP.
BREAK-POINT.
*CALL FUNCTION 'BILLING_SCHEDULE_SAVE'
TABLES
   fpla_new = t_fpla_new
   fpla_old = t_fpla_old
   fplt_new = t_fplt_new
   fplt_old = t_fplt_old.
DATA fpltr TYPE fpltr.
CALL FUNCTION 'BILLING_SCHEDULE_MAINTAIN'
EXPORTING
I_FPLA           =
I_FPLT           =
   i_upd_fpla       = 'X'
   i_upd_fplt       = 'X'
    i_fplnr          = fplnr
IMPORTING
E_DATALOSS       =
E_UPD_FPLA       =
E_UPD_FPLT       =
   e_fplnr          = fplnr
   e_fpltr          = fpltr
TABLES
    fpla_new = t_fpla_new
    fpla_old = t_fpla_old
    fplt_new = t_fplt_new
    fplt_old = t_fplt_old.
WAIT UP TO 2 SECONDS.

BAPI or FM for Customer Edit XD02

Hi gurus,
Does anyone know if there is a BAPI or FM for updating customer master data (XD02) without resorting to BDC/LSMW processing ?.
I have tried BAPI_CUSTOMER_CHANGEFROMDATA1 but it seems nobody knows which are the mandatory fields.
I have read a lot of threads that mention two more options :
FM SD_CUSTOMER_MAINTAIN_ALL - is it valid to use ? if so, can you share with me some code example plelase...
CMD_EI_API - can you share with me some code example plelase...
Thanks a lot.
Isaac

Hi Isaac,
Isaac Huerta Segovia wrote:
FM SD_CUSTOMER_MAINTAIN_ALL - is it valid to use ? if so, can you share with me some code example plelase...
Refer Zsuzsanna Hartyani comments on the same in thread
Isaac Huerta Segovia wrote:
CMD_EI_API - can you share with me some code example plelase...
Refer Daniel Klein code example in thread

Need a bapi or table for GL Report

Hi experts,
I need a bapi or table for generating report period balance for GL accounts. i found one bapi BAPI_GL_GETGLACCPERIODBALANCES which is closer to my requirement. But i want to get the balances for cost center and particular material. As Cost center and product ranges are in my selection fields.
Can anyone tell me table or BAPI?

SAP standard infoset query provides a report STDCOST for this.
May be this will suit your requirement. It will give material wise costing.
hope this helps.
reward if helpful.

BAPI Function Module for SCM APO Tcode /SAPAPO/AC42

Hi,
I want to know the BAPI Function Modules for SCM APO Tcode /SAPAPO/AC42.
   This BAPI FM should return the column values "Remaining Prod Alloc" and "Incoming Order Quantity" when we give
   below details as inputs for the Tcode /SAPAPO/AC42
        Product Allocation Group
        Product
        Allocation Procedure
        prod Alloc step
        Product Alloc Object (Characteristics of Product Alloc Group)
        Plant (Characteristics of Product Alloc Group)
        Customer Group 5 (Characteristics of Product Alloc Group)
    Reward points if helpful.
Thanks,
Mich

Hi,
You should be able to get the information using the standard BAPI (Assuming you are using SCM5.0) BAPI_APOPAL_INSERT in the transaction BAPI.
ProductAllocationAPO.DataInsert
Interface to Import Product Allocation Data Functionality
This method is used to adopt data from OLTP systems for product allocation in the global availability check.
You can do the following using the method:
Adopt new data
You can adopt new characteristics combinations or new time series. Newly created characteristics combinations have the status Active and are therefore included in the product allocation check.
Change existing data
You can overwrite existing data if you have set the interface parameter ALLOW_UPDATE. You can set the status of existing characteristics combinations to Active if you set the interface parameter UPDATE_STATUS. If the characteristics combination does not exist, the system creates it.
The product allocation quantity is overwritten for existing time series. If you also want to change the incoming orders quantity, you must set the interface parameter UPDATE_INCOMING_ORDER_QTY. If the time series does not exist, the system creates it.
Prerequisite
To be able to use this method, you must have made all the Customizing settings for product allocation. For more information, see the Implementation Guide (IMG) for SAP APO under Global Available-to-Promise -> Product Allocation.
Regards
Vinod

BAPI Function Module for SCM APO Trans code /SAPAPO/AC42

Hi,
   Is there any BAPI Function Modules for SCM APO Tcode /SAPAPO/AC42.
   This BAPI FM should return the column values "Remaining Prod Alloc" and "Incoming Order Quantity" when we give
   below details as inputs for the Tcode /SAPAPO/AC42
        Product Allocation Group
        Product
        Allocation Procedure
        prod Alloc step
        Product Alloc Object (Characteristics of Product Alloc Group)
        Plant (Characteristics of Product Alloc Group)
        Customer Group 5 (Characteristics of Product Alloc Group)
    Reward points if helpful.
Thanks,
Mich

Hi,
You should be able to get the information using the standard BAPI (Assuming you are using SCM5.0) BAPI_APOPAL_INSERT in the transaction BAPI.
ProductAllocationAPO.DataInsert
Interface to Import Product Allocation Data Functionality
This method is used to adopt data from OLTP systems for product allocation in the global availability check.
You can do the following using the method:
Adopt new data
You can adopt new characteristics combinations or new time series. Newly created characteristics combinations have the status Active and are therefore included in the product allocation check.
Change existing data
You can overwrite existing data if you have set the interface parameter ALLOW_UPDATE. You can set the status of existing characteristics combinations to Active if you set the interface parameter UPDATE_STATUS. If the characteristics combination does not exist, the system creates it.
The product allocation quantity is overwritten for existing time series. If you also want to change the incoming orders quantity, you must set the interface parameter UPDATE_INCOMING_ORDER_QTY. If the time series does not exist, the system creates it.
Prerequisite
To be able to use this method, you must have made all the Customizing settings for product allocation. For more information, see the Implementation Guide (IMG) for SAP APO under Global Available-to-Promise -> Product Allocation.
Regards
Vinod

Bapi or FM for T.Code CJIC

Hi ,
I need a BAPI or FM For T.Code CJIC to upload the data, for this BDC is not working.
Pls do the need full.
Regards,
Kranthi

Hi Daniel,
Please try FM CO_IH_ORDER_GENER_2.
CALL FUNCTION 'CO_IH_ORDER_GENER_2'
EXPORTING
    AUART       = RIWO00-AUART
    GEWRK       = VIQMEL-ARBPL
    GEWRK_OBJTY = VIQMEL-CROBJTY
    VIQMEL_I    = VIQMEL
IMPORTING
    AUFNR       = VIQMEL-AUFNR.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

BAPI or RFC FOR T-CODE F-32

hi all,
        can any one help please..
       i am searching for a bapi or RFC for t-code f-32..please help me if any one know about this.
regards,
devi....

hi all,
        can any one help please..
       i am searching for a bapi or RFC for t-code f-32..please help me if any one know about this.
regards,
devi....

Prompt please, whether is what either BAPI or FM for deblocking pp-orders

Hello.
Prompt please, whether is what either BAPI or FM for deblocking pp-orders (STAT=I0002, it is similar to that, as for example does transaction CO02, COHV).
Im voraus danke,
Anton.

Manish:
A connection object cannot exist without an address, and has only one, so deletion is not possible. You can change the address of a CO, or you can mark them for deletion.
regards,
bill.

GTS BAPI or BDC FOR Tcode /SAPSLL/PRODUCT_02

Hello All,
I need a help to upload data's in T-code /SAPSLL/PRODUCT_02 (SAP GTS ) Custom Product maintenance, i can't do with BDC because this t-code is having GUI, So kindly guide me how we can upload the data's in this t-code, and there is no BAPI or IDOC for this t-code.
Thanks in advance.

hi
try using this FM /sapsll/product_change
cheers
s.janagar

Bapi or BDC for me12

hi,
Is there any Bapi or BDC for me12.

i think There is no BAPI but you can use ME_DIRECT_INPUT_INFORECORD. otherwise wait for another replies...
Alternatively you can use these FM's
codeME_DB_UPDATE_INFORECORDS Updating info records in database
ME_UPDATE_INFORECORD Update program for purchasing info record
ME_UPDATE_INFORECORD_COND Update price in info record during maintenance from condition transac
ME_UPDATE_INFORECORD_PD Update info records from purchasing documents
Hope this ll be helpful
Thanks & Regards
vinsee

Bapi / F.M. for creation of install base for equipment (CS, not CRM)

Hi everybody,
Do you know any bapi / F.M. for the creation of an istall base, with one equipment and several materials?
Thank you
Andrea

Hi everybody,
Do you know any bapi / F.M. for the creation of an istall base, with one equipment and several materials?
Thank you
Andrea

Is there is any BAPI/FM/LSMW for BOMBOS Interface?

I have a requirement to write a custom program to transfer BOM to BOS. This we can do through CG37, But I want to execute CG37 functionality through custom program. Could you please let me know if any one knows BAPI/FM/LSMW for this? Thanks in advance.
You can send information to [email protected]
Thanks
Srini

Dear Srinivass
Kannan is right; but why can you not use Cg37? Here you have a user interface to populate the data; and if you drill down you can see how it is designed. But you need to pay attention. The BOMBOS interface will work (according to my knowledgeI) only if you "trigger" the generation of the worklist; and this is done "different" using a different function module; I believe at the "end" 'C1L0_BOM_TRIGGER_GEN_WL is used as well. BOMBOS is not discussed often here.
E.g. check: http://www.se80.co.uk/sapfms/c/c1l0/c1l0_bom_trigger_gen_wl.htm
consolut - C1L0_BOM_TRIGGER_GEN_WL - EHS: BOMBOS - Initialisierung; Erstellung BOM-Eintrag in ESTWL (sorry I found by hazard only german klink; but there is similar link in english)
May be check as well: SAP EHS Management for Beginners; some references to threads regaridng BOMBOS are available there as well.
C.B.

BAPI or FM for tcode FMBB

Hi GUys,
does anyone know if there is an existing BAPI or FM for creating a document in transaction FMBB?
Many thanks,
Ian

Hi,
use BAPI BAPI_0050_CREATE
After calling the BAPI_0050_CREATE You have put the following :
clear ret_tab.
refresh ret_tab.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
return = ret_tab.
Then the document is posted and the number is correct.
Regards

BAPI or FM for FCH6.

Similar Messages

Maybe you are looking for