BAPI or FM to load the source list i.e t-code ME01

Hi all,
is there any BAPI or FM to load the source list i.e t-code ME01
Thanks

Hi,
Please check these FM.
ME_MAINTAIN_SOURCE_LIST
ME_POST_SOURCE_LIST    
ME_GENERATE_SOURCE_LIST
Regards,
Ferry Lianto

Similar Messages

  • I cannot download photos from my digital camera to Iphoto (version '09). I have been able to successfully do this up to 4 days ago but not yesterday. My camera/device is recognized in the Source List but photos won't download for me to import to library.

    I cannot download photos from my digital camera (via a cable) to Iphoto (version '09). I have been able to do this successfully up til 4 days ago but not yesterday (Dec. 25th). My camera/device is recognized in the Source List, but when it tries to download the photos, all I get are the words "Loading Photos" in the area where the thumbnail pictures usually display. The little "gear" symbol next to the words but it just goes round and round. Nothing ever downloads, and instead of showing me how many pictures there are to import it just says "No photos". So therefore I cannot import the photos to my library since they won't even download.
    I was getting an error message a few days ago that my Iphoto library was getting full, so I emptied my trash in both Iphoto and on my computer. I had this same problem back in October and emptying the trash and getting rid of some photos did help (can I really be using that much storage space for the pictures?). But it didn't help this time.
    Any suggestions as to what to do to solve the problem? I would try taking the SD card out and inserting that into the slot on the computer to see if I could load pictures that way; but the last time I did that, they wouldn't load. Not sure if I lost pics from the disc or not.
    Thank you,
    Novice50

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • Photos tab is not selectable in the source list iPod nano

    Dear all,
    Could you please help me out? I want to import photos on my iPod nano (3rd generation). I want to do this by dragging a folder to the iPod in the sources list in iTunes, but I do not succeed.
    The 'photos' tab does not appear when I collapse the 'iPod' in the source list in iTunes. What is wrong?
    Thank you for your answer (in advance.)

    *I want to do this by dragging a folder to the iPod in the sources list in iTunes, but I do not succeed.*
    You can't add photos the same way as you add music, you have to choose the folder in the photos tab.
    The 'photos' tab does not appear when I collapse the 'iPod' in the source list in iTunes. What is wrong?
    The photos tab isn't in the source list, it's one of the preference tabs that appear in the main window when you click on the iPod icon in the source list.
    Here's a simple "How To" on downloading photos from a folder on your hard disk to an iPod:
    1 Create a folder on your hard drive to hold the photos you want on your iPod. Call it iPod Photos for example
    2 Drag the photos you want from your usual picture folder into the folder you just created
    2 Open iTunes, select your iPod in the iTunes Source list.
    3 Click the Photos tab and select “Synch photos from.”
    4 Choose “Choose Folder” from the pop-up menu and select the iPod photos folder you created.
    On a small device like the 2GB Nano I would tend to leave the "Include Full Resolution photos" box unchecked as these will take up a lot of space on the iPod and are only useful if you want to copy photos from one computer to another. iTunes will add "optimised", small TV quality versions of the photos to the iPod for you to view.
    iTunes will add "optimised", small TV quality versions of the photos to the iPod for you to view. if you want to include full size photos so you can move them from one computer to another check the "Include Full Resolution photos" box. When you want to change the photos on the iPod you simply add or remove the photos you want from your iPod Photos folder and sync the iPod.
    You can also have a look at the tutorial: iTunes 7 Windows - Loading Photos onto iPod

  • My ipod touch is not showing up on the source list

    My iPod Touch is not showing up on the source list. I have tried to restore the ipod, i have uninstalled, reinstalled, and used the repair option in the control panel to no avail. I am currently useing the latest version of Windows 8 on an Asus VivoBook. What can i do to fix the problem?

    Hello dbar2530,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Best of luck,
    Mario

  • My ipod was sst up/registered using my mac computer. Unfortunately, it was plugged into a pc and all my songs, pics, etc were erased. Now when i plug it into my mac to sync it, my ipod doesn't even show up in the source list. I can't restore it. Any ideas

    My ipod nano 4th generation was set up/registered using my mac computer. Unfortunately it was plugged into a pc and all my files, (song, pics, etc) were erased. When I plugged my ipod into my mac to sync it again, it wouldn't even appear in the source list. I can't even click on it to restore it. It's simply not there. Any ideas on how I can get it to appear in my source list and sync it again using my mac? Suggestions would be greatly appreciated! Thank you!
    Steve

    Which OS & iTunes versions do you have?

  • How to delete an item in the Source List?

    LimeWire arbitrarily entered an item in the source list of iTunes entitled "Buck's LimeWire Tunes". The item is a blue box with a musical note on it. How may I eliminate this box and the files associated with it?

    item is a blue box with a musical note on it. How may
    I eliminate this box and the files associated with it?
    Uninstall Limewire.

  • How do I get rid of the calendars in the source list?

    I don't want Iphoto automatically organizing my photos by year, and I don't want to see the last four years depicted as calendar icons in the source list, and I don't want an item called "early photos' in my source list. How do I get rid of these unwanted items/features?
    Many of the photos I'm importing have, over the years, been edited and their original photo dates are no longer valid in GetInfo, so iphoto's automated feature causes chaos upon importing.

    Hello autochthon,
    The side bar which contains some of iPhoto's built in organizational tools like "Last Import" "Last 12 Months" "Early Photos" is part of the iPhoto program and cannot be removed.
    The items you mention appear under the sub-category "Recent". You can click on the disclosure triangle to hide those features from view.
    By default iPhoto arranges all images in a chronological fashion, however you can sort your photos in your events in a variety of other ways: http://docs.info.apple.com/article.html?path=iPhoto/8.0/en/6291.html.
    For those that don't like any of the sorting options available, putting images into Albums is often a good route to go. Once you put your pictures in an album you can then drag them into whatever order meets your needs within that Album.
    Hope that helps.

  • After updating my iPhone 4 to iOS 5, I can see it in iTunes in the source list, but after selecting it, there is no summary or anything to configure my sync options. I just see 'iPhone' written. What can I do to fix this?

    I just updated my iPhone and my iPad to iOS 5.
    Restoring the backup just worked fine as well as syncing the music and videos, but my Apps weren't synced at all.
    With my iPhone I got it done, after I installed some of my apps using the cloud and suddenly the all were installed during the next sync with my iTunes. All the stored data of my apps were on the iPhone, so I didn't loose anything.
    But with my iPad, this didn't work as well. I seem to have to install all apps by my self from the cloud.
    But my major problem is, that when I connect my devices to my Mac Book Air, they are shown in the source list, but except for showing 'iPhone' or 'iPad' I see nothing. I can't configure any sync options, so I am not able to do change or do anything.
    When updated to iOS 5 I used to restore the backup from before updating my iPhone/iPad in iTunes.
    Thanks for your help.
    Best regards,
    Rene
    Germany

    You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera, particularly before any update or restore.
    You should also be syncing your contacts to your computer regularly.  They hsould be in whatever program/service that you have selected to sync.
    If you have failed to do this, then they are very likely gone.
    You can try restoring from backup.

  • What are the disadvantages of maintaining the source list?

    Hi,
    I understand that once source list is activated for plant in customizations, it has to be maintained for all the materials which are extended for the said plant, Is it true? Can I maintain only for selected materials?
    I also understand if it is maintained for material then, we can not create PO for other source for which it has not be maintained in source list.
    Thanks in advance,
    Satish

    hi
    There are no disadvantages if you maintain source list. Infact it helps lot of other functionalities other than purchasing. if you make source liost mandatory then it it required that for that particular material you need to have sourcelist  in Txn ME01.  You can have  list of vendors who are approved and put all of them in the source list for the material.  Yes you can always have independent sourcelist for a single material. Unless until you make it mandatory in customising there is no problem in PO creation. If you have made it mandatory  and you wish to create a PO for a new vendor who is not there in Source list then it is not possible to create a PO. However you can add the new vendor in the source list and go on creating the PO.
    Regards

  • How to select the vendor from the source list in the PO(me21n) screen ??

    Hi
    How to select the vendor from the source list in the PO(me21n) screen.
    Is there any Sources of Supply tab in the PO just like we have in the PR.
    I don't want a PO raised from a PR which has got the Vendor assigned to it already.
    Or the SAP doesnot provide the option of Source list/Assign source/Sources of Supply .....in the PO.
    Kindly reply

    There is not any facility available for Source Determination in PO. Only you can select the line item and click Menu Environment > Source List and view the list of sources available for the material but you can not chooss and assign. If you wan to assign the vendor then change the vendor already entered in PO and put the desired vendor.

  • How to restore iPod when it doesn't appear in the Source List?

    About 6 months ago I stupidly wiped my iPod Nano (5th Gen) and reformatted it as fat32. I assumed that when I formatted it back to Mac OS Journaled it would work normally as an iPod again but it doesn't. When it is plugged into my Mac running 10.5.8, it appears on the desktop/mac harddrive (without its individualised nano icon) and it fails to appear in the source list in iTunes (10.2.2).
    I have tried everything I know how to do, including the steps outlined in this support document:
    http://support.apple.com/kb/TS1410
    I need to restore the iPod to factory settings, but need a way to do this not through iTunes seeing as the iPod is not recognised. Specifically, in the following support document I cannot complete step 4:
    http://support.apple.com/kb/HT1339
    One last thing I have tried is duplicating the files (including hidden ones) from a 5th gen nano that does appear in my source list, and placing those files into my apparently invisible nano but this has not made any difference.
    Does anyone have any suggestions? I have basically been left with a bricked paperweight (due mostly to my own stupidity!) but would love to be able to use it again.
    Thanks for any help offered

    Hello kismet_kracker,
    What happens if you place the iPod into Disk Mode with it still connected to your Mac?  Does it then show up in Finder as a mounted drive?  Here are instructions for putting your iPod into Disk Mode.
    http://support.apple.com/kb/ht1363
    B-rock

  • How do i sync all my iphone 5g photos and contacts to my new windows computer.  I have followed instructions but the following instructions don't seem to exist!!!In iTunes, in the source list, under Devices, click the entry for your iPhone or iPod touch.

    How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply.  In the source list click devices (so far so good) then click the entry for your iphone or ipod.  that doesn't exist. HELP asap

    hayley7070 wrote:
    How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply
    What instructions?
    In the source list click devices (so far so good) then click the entry for your iphone or ipod.  that doesn't exist. HELP asap
    You don't import photos from the iPhone to your computer using iTunes.
    See this -> iOS: Importing personal photos and videos from iOS devices to your computer
    Note this only applies to photos taken with the iPhone. Any photos you previously added to your iPhone using iTunes should be copied from old computer to new computer.

  • In the source list contract Number is  not showing up.

    On 10.11.2010
    we added this Material 2211583 to contract 4600000149.
    When we do display source list it is still not showing up.
    Contract  4600000149  Validity Start  04.02.2008   Validity End    31.12.2009
    We have changed validity End date for Contract to 31.12.2010;even then it is not showing up in source list
    Is there any possibility to get Contract number in the source list
    Thanks in advance
    SAP MM

    what did you do to get the contract into the source list for this item?
    it does not create a source list item by itself, only because you entered the item in a contract.
    You can either create the source list entry from the contract via menu. or you have to enter the contract manually  in ME01 or you generate the source list with ME05

  • BDC for ME01 to delete vendors in the source list

    Hi ABAP'ers,
                         I am trying to write a BDC program to delete a particular vendor from ME01 TCODE. My program runs well till deletion after i delete a record it is showing a pop up to confirm and on clicking yes the vendor is deleted. But the source list is not getting saved, or in other words the BDC flow stops after deletion, though i have handled save ok code in my BDC internal table. is there a solution for this.
    thanx $ regrds
    thrinath k

    Run in mode 'E' and fix whatever you have missed on your BDC.

  • System not checking the source list while creating Scheduling Aggrement

    Dear Gurus,
    when i create a PO for a material(XYZ) which is not having a vendor(100) in the source list the system throws me a error message sayin that the vendor(100) is not maintained i the Source list.
    but the same is not happenin when i create a Scheduling aggrement.
    Can you please advice me which setting i am missin here?
    Thanks...
    Kumar

    Hi,
    Are you trying to create the Scheduimg agreement for the same plant as that of the Purchase order?
    As "Source list mandatoty" check box is in the plant specific view of Material master,it is possible that it is not ticked in case both the plants are different.
    Please check & advise.
    Thanks & regards,
    Kaveri

Maybe you are looking for