BAPI or Functional Module Reads Profit Segment From PR
Hello, does anybody know about BAPI or Functional module to read profit segment, created in Purchase requisition?
Or another technic to get: PAOBJNR
Here is a solution which was useful to us:
Take paobjnr form ebkn, and then: CALL FUNCTION 'RKE_CONVERT_PAOBJNR_COPADATA' and just read exported table with fields inside the profit segment
+ 1 simple select for customer description for example J
Similar Messages
-
Is there any BAPI or function module to delete entries from a table (VBAK)
Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK sales document: header data
selection fields:
VBAK-LIFSK ≠ <BLANK>
VBAK-ERNAM = userID used by e-Sales / IVE
(EP-BATCH / EAI-BATCH)
VBAK-ERDAT <= Current system Date
VBAK-ERZET <= Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
ReddyHi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
s_lifsk FOR vbak-lifsk DEFAULT '10',
s_ernam FOR vbak-ernam,
s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
s_erdat like vbak-erdat,
s_erzet like vbak-erzet.
DATA:
BEGIN OF int_final OCCURS 0,
w_vbeln TYPE vbak-vbeln,
END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
INTO TABLE int_final
WHERE lifsk EQ p_lifsk
AND ernam IN s_ernam
AND erdat IN s_erdat
AND erzet IN s_erzet.
IF sy-subrc = 0.
LOOP AT int_final.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = int_final-w_vbeln
ORDER_HEADER_IN =
order_header_inx = int_order_header_inx
SIMULATION =
BEHAVE_WHEN_ERROR = ' '
INT_NUMBER_ASSIGNMENT = ' '
LOGIC_SWITCH =
NO_STATUS_BUF_INIT = ' '
TABLES
return = int_return
ORDER_ITEM_IN =
ORDER_ITEM_INX =
PARTNERS =
PARTNERCHANGES =
PARTNERADDRESSES =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
SCHEDULE_LINES =
SCHEDULE_LINESX =
ORDER_TEXT =
ORDER_KEYS =
CONDITIONS_IN =
CONDITIONS_INX =
EXTENSIONIN =
ENDLOOP.
LOOP AT int_return.
WRITE:/ int_return-type,
int_return-id,
int_return-number,
int_return-message.
ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy -
Hi, Bapi or function module to update RBCO table from an internal table.
I have a requirement to update RBCO table from an internal table. is there any Bapi or function module or any other method other than update, modify statements.
Moderator message: Welcome to SCN!
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jul 12, 2011 12:28 PMI don't know if any FM exists for your requirement. But you may like to copy it into a custom table and modify it according to your enterprise needs.
-
BAPI or Function Module interface from XSD definition
Given an XSD file, is there any way to automatically generate a BAPI or Function Module interface from it?
BR,
Tony.Hi,
There are two approaches to create interfaces in XI
- Outside-In - interfaces definitions are stored in XI as e.g. xsd and PROXY classes/interfaces are generated in business system
- Inside-Out - interfaces are developed in business system and imported into XI e.g. IDocs, BAPIs, RFMs
So it is NOT possible to generate BAPI or FM based on XSD definition, but you can generate proxy.
Regards,
Jakub -
Diff b/w BAPI and Function Module.
What is the difference between BAPI and Function Module....
By Interface programming do we mean posting data thru BAPI,BDC....Hi Alex,
BAPI: Standard Interface in the R/3 system that allows the system to communicate with components of other business suites.
FM: These are the procedures that are defined in the Function Groups and can be called from any ABAP Program. FM allow you to encapsulate and reuse global functions int he R/3 system.
The main basic difference between BAPI and FM are
1) All BAPIs are FM but not all FMs are BAPIs
2) BAPIs are remote enabled
3) BAPIs interface will not have a changing and exceptions. They can not be used to have use dialog.
Interface programs can post data to SAP either through a BDC, BAPI, IDOC etc. It depends on the type of requirement.
Hope this solves your question.
Enjoy SAP
Rajasekhar -
Standard BAPI or Function Module for FB01posting
Hi Experts,
My requirement is as follows.
Invoice details would be sent across from Middleware to SAP and for which I have developed a Custom Remote Enabled Function Module. The Function Module needs to post the data using FB01 Transaction.
I had planned for recording a BDC for FB01 and post the data, however, we are on the verge of getting upgraded from 4.7 to ECC 6.0. To avoid problems that we might face for change of screens in ECC 6.0, I would prefer using a BAPI or Function Module for FB01 posting, if available, instead of BDC.
Data coming from Middleware are as follows.
HEADER:
BKPF-BLDAT : Document Date
BKPF-BUDAT : Posting Date
BKPF-XBLNR: Reference (Invoice#)
BKPF-BLART : Document Type
BKPF-BUKRS : Company Code
BKPF-BKTXT : DocHeader Text
BKPF-WAERS : Currency
LINE ITEM:
BSEG-LIFNR : Vendor no
BSEG-WRBTR - Total amt -Debit/Credit -Vendor
BSEG-ZUONR : Assignment field
BSEG-EMPFB : Alternative Payee
BSEG-UZAWE : Payment Method Supplement
BSEG-ZTERM : Pmt terms
BSEG-KOSTL : Costcenter
BSEG-HKONT : GL AccountNumber
BSEG-WRBTR : Amount for GL
BSEG-SGTXT : Line item text
The Vendor Line Item would be one where as GL line items could me more than one.
Can any of you suggest me a standard BAPI or Func Mod?
Points will be awarded for valuable inputs.
Thanks to all!!!!You can use RFBIBL00 program for FB01 postings. Go through the program help on how to use this program.
This program requires a file to be on application server in a certain format.
You may also refer the program RFBIBLT0 on how the file format should be.
Hope this helps.
Thanks,
SKJ -
BAPI or Function Module for F-53 and FBZ1
Hi Gurus,
I am currently executing two transactions F-53 and FBZ1. I would like to know if there are any read BAPIs or function modules that take BELNR_D(Document Number) and Company code and Fiscal Year as input and give the rest of the details I enter in these transactions like, partial payment, residual payment.
Kindly help.
Many Regards,
SagarHi, Sagar:
Nice to see your thread here
No matter what kind of transactions you are using, finally, there will be a document posted in General Ledger Accounting, which is what you want. So to read the result, you can always try function module, like FI_DOCUMENT_READ.
Hope it will help.
Best Regards, Lawrence -
BAPI or Function Module for F-22
Hi I am working on one scenario. I am clearing the document using F-30 transaction in one company code and Posting the same document in other company code using F-22. I need to know whether it posts successfully or not using F-22 before I clear the document so that I can stop this from clearing. I can not do this simply using the BDC. Here I need a BAPI or function module to have a check whether it will post successfully or not using F-22 before I clear the document using F-30.
Please help me to find the right BAPI or Function Module here.
Thanks,
Ravi.Hi Eswar,
BAPI_ACC_DOCUMENT_POST works only for 2 line postings. But we can make it work for one line by implementing BTERWBAPI01.
Here you will be passing ACCHD-GLVOR = RFST
ACCIT-BSTAT = S
ACCIT-BSCHL = 39
ACCIT-UMSKZ = F
ACCIT-ZUMSK = Z
could you please share the code that you have implemented in BTE?
please share the sample code that you have done for BAPI.Because I also have the same requirement for f-47.
Regards,
xavier.P -
Difference between bapi and function module
Can you guys tell me what are the differences in calling bapis and function modules?
I see we are calling both as the same way we call function modules. May be for bapis, we need to be careful in declaring and passing those exact structures. Can you please make it clear reg. the differences between them?
I appreciate it.
Thanks!HI,
See these links on help.sap.com
<b>For BAPI:</b>
The data entered in the Internet is transferred to the R/3 System via BAPIs (Business Application Programming Interfaces).
Data in the R/3 System is accessed via BAPIs as well.
A Good Site for BAPI's
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://help.sap.com/saphelp_erp2005/helpdata/en/7c/3ce38765ba11d395fe00a0c94260a5/frameset.htm
<b>For Function Module:</b>
The important use of functional module is it is used by Enhancements.
SAP Enhancements are used to expand the standard functionality within SAP.
Enhancements use function modules and are called from the standard SAP code.
http://help.sap.com/saphelp_erp2005/helpdata/en/41/7af4daa79e11d1950f0000e82de14a/frameset.htm
List of functional modules ( Good Site)
http://www.geocities.com/victorav15/sapr3/abapfun.html
Hope it helps!!!!
Thanks
Sudheer -
Help required in bapi or function module..
Hi,
Is there any BAPI or Function Module to get cost center description by giving cost center as input parameter? please suggest me.Thanks in advance.
Regards,
Sandy.Hi,
write a simple select query instead of FM or BAPI.
select single ltext
into lv_ltext
from cskt
where spras = sy-langu
and kokrs = lv_kokrs " put your controlling area
and kostl = lv_kostl "put your cost center
and datbi = lv_datbi. "put your valid-to date
Thanks,
Srilakshmi.
Edited by: Srilakshmi Moola Ram on Sep 17, 2009 7:19 AM -
Function module to send mail from SAP
Can any one please tell the Function module to send mail from SAP. The scenario is like this,I have a file in local system that i have to send to a particular mail address like [email protected] through a report program.
Hi shafiq,
1. There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m. -
BAPI or Function Module to Update Vendor Details
Hi Friends,
I need to update Vendor Details (Street) in my program using a BAPI or Function Module. Is there such thing available which can do my job?
Regards,
Raju...Hi,
Thanks for the Reply.
I tried to use the FM Vendor_Update... It updates the adrress field in the table LFA1. But it is not reflected in the transaction FK02.
So, Is there any thing that I have to do after the FM Vendor_Update is called so that the address field is also get reflected in address field of FK02 transaction.?
Regards,
Raju... -
dear all
is there any BAPI or function module to change Assignmnet no. (ZUONR) of T code FB02.
i want to change it in a mass.
i have tried FI_ITEMS_MASS_CHANGE but its not working...is there any way to do BDC for the same...
or we can give any condition in BDC to read any particular line item details..actually i have to double click on vendor line item and there i have to change the asignment field text.
pls help...
jigar pCheck the Post
Any BAPI for "FB02"
Code is given how to use FI_ITEMS_MASS_CHANGE .
Regards,
Abhishek -
Any Bapi or function Module to update standard table
Can u Plz let me know , is there any bapi or function module to update few fields of a standard table using an internable.
I don't know if any FM exists for your requirement. But you may like to copy it into a custom table and modify it according to your enterprise needs.
-
Is there any delivered BAPI or Functional modules available for MCHB table
Hi Experts,
I have a requirement where I have to pull inventory data from MCHB table without custom code. Is there any delivered BAPI or Functional modules available for MCHB table?
Kindly help!
Thanks
GopalHi,
Can you check using the Fun Modules
MG_BATCH_CHECK_STOCK
VB_READ_BATCH_WITHOUT_STOCK
VB_BATCH_GET_ALL_STOCKS
Regards,
Anji
Maybe you are looking for
-
Error when creating source system
Hi, Could someone help me to solve this issue :When I want to create a source system D99100 in BI , I get the following message: the test and remore connection via sm59 in BI are OK. Source system cannot use any of the proposed connection names Mess
-
New macmini - keyboard fails to pair
I just unpacked a new macmini. My old mouse will pair with it (I use a trackpad on the i7 now) but the new wireless keyboard will not pair with the macmini. I tried powering off the i7 and removing batteries from the othey keyboard and trackpad but t
-
Entire contents in cell won't print in numbers
I am working on a spreadhseet in numbers. One of my cells is text ONLY; in fact, the entire column is text only.Nevertheless, when I click out of the cell, what I see is only see the first line of the cell contents and more importantly, when I attemp
-
Why OSPF is not used in MPLS, though it is very efficient protocol
Dear all, though OSPF is a very efficient protocol, with a number of features to handle much larger networks,it is not used in MPLS. Can u plz let me know, what special features BGP posses over OSPF, for its selection in MPLS.
-
Printing differences between LR and CS2
Today I downloaded a trial of LR. I've played with it all day and am fairly happy with its organizing capabilities. However, when I printed a file from LR on an Epson R2400, on Premium Luster paper the print is close to colorless. When the exact same