BAPI or RFM for either HRP1007 Table or BAPI/RFM to see the vacant position
Hi all
i need BAPI/RFM to display the list of vacant positions .I knoe HRP1007 Table. but my requirement is BAPI/ RFM.
Plz help me
Thanks in advance.
Hema
Hello
Please check if the FM 'RHPH_GET_VACANT_POSITIONS' suits your requirement.
Regards
Ranganath
Similar Messages
-
Table name where I can see the Secondary bit map Index for Cube Loads in BI
Hello Friends I want to know the table name where I can see the Secondary bit map Index that gets created with each request that get loaded to Cube so each 1 request will be multiplied by 7 dimension and 7x1 = 7 local secondary bit map index will be created where is that table which show me that .
Under Oracle every uncompressed request corresponds to one partition in the
F facttable of the corresponding infocube. This partition also brings along
a full set of secondary local bitmap index partitions.
If you have a cube with 10 uncompressd requests and 10 dimensions (every
dimension brings with it a local bitmap index) you have 100 partitions for
the table itself and 10 x 10 index partitions which makes a total of
100 database objects. where is that table in BI WHICH STORE THIS INFORMATION
Also if I have E Table with no entries for future 2009 dentries will that be an issue with blank partition ion E Fact table if yes please suggest how to resolve this issueHi Soniya
Information about BI objects is stored in the RSD* tables. For example:
Infocubes: RSDCUBE / RSDCUBET
Aggregates: RSDDAGGR_V / RSDDAGGRT
You can see information on abap dictionary object as well in transactions SE11 / SE14. You will have to know the real table name of the cube, should be something like /BIC/F* for the uncompressed and /BIC/E* for the compressed table.
Best regards, Michael -
I bought Ebey NEW Boxed (NEVER OPENED) 16GB Black Iphone 5 Virgin Mobile (USA) NO CONTRACT, want to use it in Europe, particularly in Ukraine, but for some reason now my phone does not see the Ukrainian GSM sim card. Please help to solve this problem.
Return it and get your money back. Virgin does not offer official unlocking, thus there's no way to get the phone officially unlocked for you to use it.
Sorry, but you wasted your money. -
I work with lots of rar and zip archives, and often times i need to view the contents with out extraction, and/or just extract a single file out of a larger archive. Some archives can be upper of 5gb, extracting the entire archive for 1 10meg file gets tedious.
I've tried unrarX and the unarchiaver both just instantly start extraction and don't allow me to see the contents of the file.
WinRar on PC is what i'm trying to emulate, with no success so far.
Any suggestions?http://macitbetter.com/
http://www.eigenlogik.com/entropy/
Can't find any free ones that will allow peeking. -
My Lightroom 5 stopped working & I was forced to upgrade to Lightroom 6. I paid the $9.99/ month fee for Lightroom 6 & Photoshop. I'm not seeing my Photoshop yet
If you have Windows, type Photoshop in the Start menu search box. It should show up.
If it does not, you have to download and install it. -
Hey Gurus
I want to know weder der is a BAPI available for VA05 ,
Need to transfer SO Date , SO , SO type (but dat should be company specific) and PO no .
and whether this would have to relate with the company code ,since different company code must be having same customers .
Looking for an early reply
Regards
Edited by: Chaitanya kamble on Jul 31, 2009 7:56 AMHI,
Try to use this BAPI. BAPI_SALESORDER_CREATEFROMDAT1
Regards,
John Victor -
What is the table name where i can see the REQ SID and normal REQ
HI,
When i load the data into the psa the system will generate a req
REQ_*********
and when i load the data into the IC and after activation it will give req SID.
Now there is an infoobject 0tctrequid for which otctreqsid is an attribute i want to maintain it.
I am using a remote cube on getting data from PSA generated DS.
NOw i want to populate the query based on request sid not on req lyk req_****
when i make otctcreqsid as a navigation attribut eof otctrequid and activate it and then trying to activate the remote cube then its giving eror lyk
Higher-level InfoObject 0TCTREQUID__0TCTSYSID for InfoObject 0TCTREQUID__0TCTREQSID is not contained and
Higher-level InfoObject 0TCTREQUID__0TCTSYSID for InfoObject 0TCTREQUID__0TCTSOURSYS is not contained
its urgent plz help me
thanks in advance
K Janardhan KUmarHi,
All those characters are the attributes of 0tctrequid.some are navigational and some display.
It is there for me as a option in the remote cube and multiprovider.
when i select them and and tried to reactivate the above sspecified problem is coming.
I already checked the M table and saw nly Data Request (GUID) is available not the value ata Request (SID). now h to update this M table i mean the 0tctrequid object with the attribute values? any source?
Thanks a lot
K Janardhan KUmar -
There are some iOS apps appear in the file sharing list of my iPad that does not appear in my iPhone file sharing list. Why is that and why iBook App does not show on the sharing list of my iPad?
The apps which show on the file sharing section on your iPad when connected to your computer's iTunes, you have exactly the same apps installed on your iPhone - they are not separate iPad and iPhone apps that you have installed on your iPad/iPhone, and only the iPad version supports file sharing ?
For iBooks, that won't show, it doesn't support file sharing. You can add ibooks / epubs / PDFs to your computer's iTunes library (the iBooks app if you are using a Mac with OS X Mavericks on it) via File > Add To Library, and you sync them to a device via its Books tab :
If you want to copy them off the device to your computer's iTunes (to the iBooks app on Mavericks) then File > Devices > Transfer Purchases will copy them over (that will copy PDFs and epubs from the iBooks app on your device, not just ibooks). -
I can't use Markup for Mail in Yosemite and I can't see the extension of it.
I tried to use the Markup feature and I can't, also I tried to enable the extension of it but it doesn't appear.
Thanks- I know that it's for attachments. Doesn't work on my machine. Not interested in re-installing. If anyone else has a fix, I'd be interested, otherwise, I guess I'll just wait for an update.
-
I am using Windows 7 & Fire fox 6.0
I also have this problem, if the problem has been resolved, please email me
-
How to create object class for a z table
Hi All,
I have a z table and I want to register the changes of fields should be logged to CDHDR and CDPOS table.
Is this possible?
If yes how can I creat an object class for a z table. I have already checked the change document option in z data element.
Please help.
Regards,
Jeetu
Moderator message: standard functionality, please search for available information/documentation before asking.
locked by: Thomas Zloch on Oct 6, 2010 6:16 PMTcode SCDO. You'll need to create a change document for you Z table and then use the FM created to record the changed data.
-
Hai friends,
Is there any BAPI or FM for tcode J1ID
thanks in advance,
Regards
Janani.SHi Janani,
Please follow the following steps to find BAPI or FM for a particular transaction
Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
Find out the package of the transaction.
Start Va01 go to system --> status.
Double click on transaction
Package is VA
Open this package in SE80
Open business engineering-->Business object types
Find the BO which sounds the most appropriate
I would suggest BUS2032 Sales Order
Double click.
Open methods.
Find the released method with from data or something similar in the name
, Createfromdat2
Position the cursor in it and click the program button
Scroll down to find the bapi used in this method
For finding FM's and programs use the below steps:
Start va01 go to system-->status
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order
createfromdat2
Regards,
Manish -
Creating index for standard SAP tables
Hi!
What are the advantages and disadvantages of creating addtional indexes for tables with massive amount of data (BSEG, BKPF, COEP, etc...).
If I create a new index it supposed to make the table access faster, for the cost of hard disk space.
Am I right?
Thank you
TamáHi,
Primary and secondary indexes
Index: Technical key of a database table.
Primary index: The primary index contains the key fields of the table and a pointer to the non-key fields of the table. The primary index is created automatically when the table is created in the database.
Secondary index: Additional indexes could be created considering the most frequently accessed dimensions of the table.
Structure of an Index
An index can be used to speed up the selection of data records from a table.
An index can be considered to be a copy of a database table reduced to certain fields. The data is stored in sorted form in this copy. This sorting permits fast access to the records of the table (for example using a binary search). Not all of the fields of the table are contained in the index. The index also contains a pointer from the index entry to the corresponding table entry to permit all the field contents to be read.
When creating indexes, please note that:
An index can only be used up to the last specified field in the selection! The fields which are specified in the WHERE clause for a large number of selections should be in the first position.
Only those fields whose values significantly restrict the amount of data are meaningful in an index.
When you change a data record of a table, you must adjust the index sorting. Tables whose contents are frequently changed therefore should not have too many indexes.
Make sure that the indexes on a table are as disjunctive as possible.
(That is they should contain as few fields in common as possible. If two indexes on a table have a large number of common fields, this could make it more difficult for the optimizer to choose the most selective index.)
Accessing tables using Indexes
The database optimizer decides which index on the table should be used by the database to access data records.
You must distinguish between the primary index and secondary indexes of a table. The primary index contains the key fields of the table. The primary index is automatically created in the database when the table is activated. If a large table is frequently accessed such that it is not possible to apply primary index sorting, you should create secondary indexes for the table.
The indexes on a table have a three-character index ID. '0' is reserved for the primary index. Customers can create their own indexes on SAP tables; their IDs must begin with Y or Z.
If the index fields have key function, i.e. they already uniquely identify each record of the table, an index can be called a unique index. This ensures that there are no duplicate index fields in the database.
When you define a secondary index in the ABAP Dictionary, you can specify whether it should be created on the database when it is activated. Some indexes only result in a gain in performance for certain database systems. You can therefore specify a list of database systems when you define an index. The index is then only created on the specified database systems when activated
Thanks and Regards
Arun Joseph -
Hello Friends,
The background is I am working as conversion manager and we move the data from oracle to SQL Server using SSMA and then we will apply the conversion logic and then move the data to system test ,UAT and Production.
Scenario:
Moving the 80 Million records from Conversion database to System Test database (Just for one transaction table) taking too long. Both the databases are in the same server.
Questions are…
What is best option?
IF we use the SSIS it’s very slow and taking 17 hours (some time it use to stuck and won’t allow us to do any process).
I am using my own script (Stored procedure) and it’s taking only 1 hour 40 Min. I would like know is there any better process to speed up and why the SSIS is taking too long.
When we move the data using SSIS do they commit inside after particular count? (or) is the Microsoft is committing all the records together after writing into Transaction Log
Thanks
Karthikeyan Jothihttp://www.dfarber.com/computer-consulting-blog.aspx?filterby=Copy%20hundreds%20of%20millions%20records%20in%20ms%20sql
Processing
hundreds of millions records can be done in less than an hour.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
SOST - transmission requests- How to see the log in a table
We see the messages and the log in SOST for a background job.
We want to see the log contents in a related table.
We checked table SOOD but can not see the log details.
Is there any way to see / extract log details by giving the user ID , created date and job name?
Regards,Hi
If you are using the Extending classic, you can see the output details in the SOST. suppose if you want to check whether the PO send to vendor or not viea email.
BR
Satish
Maybe you are looking for
-
Need to deny access to file manager for the user
Hi I need to be able to deny access to the file manager, as I dont want my client deleting files. however, for some reason I have to allow him access to this as he needs to be able to upload files through InContext Editor (he needs to link pages to d
-
Download for SQL Server machine running Windows Server 2008 Enterprise SP2
I am confused what 11g product to download and how to configure for the above server. I just need for SQL Server 2008 to be able to communicate with some Oracle databases. I don't need to manage the Oracle database, nor do I need to create one. I jus
-
How can I import an iMovieHD (5.0.2) file into 10.0.3?
Have an edited iMovieHD (5.0.2) on my PowerePC G4, OS X 10.4.11, that I'd like to migrate/import to iMovie 10.0.3 (Mavericks OS X 10.9.2); can this be done, and if so, how?
-
Will this hard-drive work in a MacBook?
Will this hard-drive work in a MacBook? http://www.lambda-tek.com/componentshop/index.pl?prodID=1075517 Thanks, Steve.
-
"Inadmissible movement type-acceptance at vendor set for PO item"
Hi, Can any body tell me how I could solve message in MIGO"Inadmissible movement type-acceptance at vendor set for PO item" Regards, Anil