BAPI_PO_CREATE1 keep prompting address error

Hi Experts,
I called the BAPI_PO_CREATE1 to create PO, but it keep prompting for the error msg : Address doesn't exist T001W1001.
I have checked plant 1001 is existed in table T001W, as well as ADRC address table corresponding the the address number in T001W.
Is there any other reason why BAPII keep prompting for this address error while the address data seems fine?
Any help is greatly appreciated.
Thanks.

adas

Similar Messages

HT4623 i've trouble in installing the new ios 7 on my ipad.. tried several times, keep prompting an error occurred during download. even i tried to recover my ipad, still can't work.. i'm wondering anyone able to counter that problems?

i tried to install via ipad itself, via itunes, even tried to restore the original setting, but still failed... i had no other ways, therefore i'm seeking for assistance..

Hello, PriestessJeanann.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing issues with mail. The usual fix would be to delete the email account in question and add this account via the preset AOL option. I would also recommend checking with your email provider for security procedures such as two-step verification as this could cause this issue.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Cheers,
Jason H.

Address error. CrystalEnterprise.Smtp: SMTP_E_MAILBOX_UNAVAILABLE_2(550)

Hi,
Due to problems with the Report Server, I had to reinstall the Crystal Reports Server XI. I had copied previous job description into word before reinstalling. When I was rescheduling reports I keep getting address errors.
I noticed that the description is different compared to the previous installation. In the previous installation, I had the description "Mail the instance to 'xxx#xxx.com.au', 'bbb#xxx.com.au' with a subject of '%SI_NAME%'.
In the new installation, the description is "Mail the instance to "[xxx#xxx.com.au, bbb#xxx.com.au]" with a subject of '%SI_NAME%'. It seems that the new installation added square brackets around the emails I entered, which was "xxx#xxx.com.au; bbb#xxx.com.au" (without quotes).
How can I get Crystal reports server to recognise the email properly?
PS: the at symbol is replaced with "#" due to limitations of adding email addresses.
regards
Frank Neo

Hi Kyle,
I would suggest testing on the Job Server machine by using telnet to see if you can email externally from the command prompt. Below is a link of how to use mailman:
http://www.yuki-onna.co.uk/email/smtp.html
Are you able to schedule the report externally without an attachment? I would also suggest speaking to your Exchange Server administrator. There may be logs or restrictions for outgoing emails set on the mail server.
Regards,
Wallie

I am trying to change my Apple ID. Try to do this I keep getting an error message saying 'This email address is designated as your rescue email address and cannot be used as your Apple ID or Primary email address. Please choose another.' The email address

I am trying to change my Apple ID. Try to do this I keep getting an error message saying ‘This email address is designated as your rescue email address and cannot be used as your Apple ID or Primary email address. Please choose another.’ The email address that I want to use did use to be my recovery email but I have changed it, so that address is no lonegr associated with my account. I do not understand why I cannot use it as my Apple ID now. Can anyone help?

Contact iTunes customer support for assistance.

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

How can I edit iCal server addresses in Mountain Lion? I keep getting an error with regards to my google calendar and I understand that the way to fix the problem is adjust the server address, but I cannot access it because the preferences are restrictive

How can I edit iCal server addresses in Mountain Lion?
I keep getting an error message with my google calendar, and I heard that if I delete the extra slash at the end of the address the problem will be fixed. But the iCal account preferences take me to system preferences > accounts every time I want to edit the account.
Does anyone know where I can edit the server address?

You should ask in the iCloud forum, this is for iMacs. https://discussions.apple.com/community/icloud/icloud_on_my_mac

My outlook keeps showing an error message and prompting to close, what do I do?, my outlook keeps showing an error message and prompting to close, what do I do?

my outlook keeps showing an error message and prompting to close, what do I do?

http://www.microsoft.com/mac/support
for support for Microsoft products.

I have an ipad 2, 16GB 3G WiFi, black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?

I have an ipad 2, 16GB 3G WiFi, worked perfectly, but now black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore from recovery mode, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?
I have tried multiple laptops with both units, re-installed Itunes, same error message on one of the units but ok on the other. Thinking I have a defective Ipad 2, any ideas on what to do is greatly appreciated.

Tried Google? iPad error 1600

I keep getting a error message "address is not recognized be server"?

I keep getting a error message "address is not recognized be server"?

To download/install an app directly to the iPod you need available storage equal to about three times the file download size. Syncing the app to the iPod requires a lot less. Thus you either have to free up more storage or sync the app from your computer.

Just recently on my IPad I can't update my App. I keep getting the error message "invalid Address" what is going on?

Just recently on my IPad I can’t update my App. I keep getting the error message “invalid Address” what is going on?

There are a number of threads about this - it looks like Apple recently updated their address validation. Some people have recorded success by :
ensuring that their iTunes account address is exactly the same as appears on their credit card bill
putting something in the second line of the address (including just copying the first line)
expanding abbreviations e.g. St to Street, Ave to Avenue etc (or conversely abbreviating)
putting apartment or suite number on the second address line

Just recently on my IPad I can't update my App. I keep getting the error message "invalid Address"

Just recently on my IPad I can’t update my App. I keep getting the error message “invalid Address”

There are a number of threads about this - it looks like Apple recently updated their address validation. Some people have recorded success by :
ensuring that their iTunes account address is exactly the same as appears on their credit card bill
putting something in the second line of the address (including just copying the first line)
expanding abbreviations e.g. St to Street, Ave to Avenue etc (or conversely abbreviating)
putting apartment or suite number on the second address line

Holding down "shift" during startup causes an "address error" with a prompt

while booting from a dedicated OS 9.2.2 drive,...
holding down "shift" during startup causes an "address error" with a prompt to restart holding the shift button,...
an ideas,....?
it otherwise starts up fine normally,....
with spacebar depressed everything good too,.... into extensions manager...
but booting with extensions off causes that address error crash just before desktop is to appear,...
hmmm,.... ideas,....?
thanx

Well, address error means it's getting an odd addy somehow, and if it's with Extensions off, then maybe a PRAM or NVRAM reset would cure it...
Have you done a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238

Why do I keep getting Java Script address error messages?

I just installed FF on my Macbook, and am constantly getting java script address error messages popping up.

Does the below article help resolve the messages?
* [[Warning Unresponsive script - What it means and how to fix it]] < Click to see article

The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message

Hello,
Please help me figure this out. I'm very unhappy at the moment. I'm fustrated and don't have any idea how to revert to the original version before the update was done on iMovie 10. I NEVER hated APPLE until NOW!! I love APPLE products and apps so please help me stay in that mindset. So I worked on some movie projects when I got my macbook pro 6 months ago. I update reguarly. I saw the update prompt and honestly, I did not think I would have ANY issuess with opening my previous files that I created only a few months ago with this updated version.The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message and the iMovie app closes. Last night I saw the file and tried to open it but no luck. Error message came up again. I reboot and turned off my laptop for the evening and tried again just now but nothing!! I need that video. My job depends on it! I worked so hard on this wedding video and now it's lost and won't open. I work another job and don't have much time. I really don't want to start all over again. Please help me. Thanks so much for your assistance.
Fustrated APPLE customer
Jolly A. Rupp

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

Firefox keeps prompting me for password with the popup

Firefox at my work computer keeps prompting for password with the popup message "The proxy moz-proxy://proxy:9119 is requesting a username and password. The site says: "moz-proxy://proxy:9119"" This happens too often,even If i provide the username and password I get the next popup with same message.
Its very annoying, I am not finding web better because of this, I goggled and figured about the config settings of - network.automatic-ntlm-auth.allow-proxies and the other one not working.
I guess I am missing the PAC URL or something which I remember like solved the problem sometime back but not in same domain though.
Can someone help ?
Can the good community help ?

Quitting Calendar Agent is not working for me. I still get the following errors.
About 50 of these: 8/13/12 10:19:28.210 AM CalendarAgent[12480]: Unexpected EOF, returning last token as fallback
Then about 10 of these:
8/13/12 10:19:31.193 AM CalendarAgent[12480]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fb603b9d990 {AccountName=, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fb603f5a4b0 [0x7fff79a05190]>{type = immutable dict, count = 10,
entries =>
    0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7fb6038d0650 [0x7fff79a05190]>{contents = "nosniff"}
    1 : Case Insensitive Key: Content-Type = <CFString 0x7fb603bd3930 [0x7fff79a05190]>{contents = "text/html; charset=UTF-8"}
    2 : Case Insensitive Key: Server = <CFString 0x7fb603b1c400 [0x7fff79a05190]>{contents = "GSE"}
    3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff792226b8 [0x7fff79a05190]>{contents = "Identity"}
    6 : Case Insensitive Key: Date = <CFString 0x7fb603bf6300 [0x7fff79a05190]>{contents = "Mon, 13 Aug 2012 14:19:31 GMT"}
    7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7fb603869680 [0x7fff79a05190]>{contents = "SAMEORIGIN"}
    8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7fb603b01740 [0x7fff79a05190]>{contents = "1; mode=block"}
    9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fb603bcf200 [0x7fff79a05190]>{contents = "BASIC realm="Google CalDAV""}
    11 : Case Insensitive Key: Cache-Control = <CFString 0x7fb603b08d50 [0x7fff79a05190]>{contents = "private, max-age=0"}
    12 : Case Insensitive Key: Expires = <CFString 0x7fb603bf8a20 [0x7fff79a05190]>{contents = "Mon, 13 Aug 2012 14:19:31 GMT"}

BAPI_PO_CREATE1 keep prompting address error

Similar Messages

Maybe you are looking for