BAPI PO in SAP version 40b
HI All,
Anyone know BAPI for create and change PO in SAP version 40b?
This BAPI is not available:
BAPI_PO_CREATE1
BAPI_PO_CHANGE
Can we use this function?
ME_CREATE_DOCUMENT
How about for changing?
Please advice, with the example much better
Best Regards,
Victor.
I don't think there is BAPI for PO in 4.0B Version..
ME_CREATE_DOCUMENT - will create Purchase order
Use this FM ME_UPDATE_DOCUMENT to update PO
I saw the FM and looks like both FM will create and update FM,I did not find any sample programs.
Do the where used list in SE37 and may be you get atleast one SAP standard program.
Thanks
Seshu
Similar Messages
-
BAPI for create material master (SAP version 40b)
Hi,
Anyone know BAPI for create material master for SAP version 40b?
There's no BAPI_MATERIAL_SAVEDATA.
I try to use BAPI_MATERIAL_MAINTAINDATA_RT,
but seems that BAPI only for retail.
Kindly advice!
Thanks,
Victor.Hi,
this one works pretty good.
call function 'MATERIAL_MAINTAIN_DARK'
exporting
sperrmodus = ' '
kz_prf = 'W'
max_errors = ' '
p_kz_no_warn = 'X'
kz_verw = 'X'
kz_aend = 'X'
kz_dispo = 'X'
kz_test = ' '
flag_muss_pruefen = ' '
call_mode = 'ACT'
importing
number_errors_transaction = numerror
matnr_last = last_matnr
tables
amara_ueb = i_mara "Basic Data
amakt_ueb = i_makt "Descriptions
amarc_ueb = i_marc "Plant
amard_ueb = i_mard "Storage Location
AMFHM_UEB = I_MFHM "Production Tools
amarm_ueb = i_marm "Units of Measure
AMEA1_UEB = I_MEA1 "Internal Mangagement - EANs
ambew_ueb = i_mbew "Accounting/Costing
asteu_ueb = i_steu "Tax Data
astmm_ueb = i_steumm "Tax Data
AMLGN_UEB = I_MLGN "Warehouse Data
AMLGT_UEB = I_MLGT "Storage Type Data
AMPGD_UEB = I_MPGD "Change Documents
AMPOP_UEB = I_MPOP "Forcast Parameters
AMVEG_UEB = I_MVEG "Total Consumption Data
AMVEU_UEB = I_MVEU "Unplanned Consumption Data
amvke_ueb = i_mvke "Sales Data
altx1_ueb = i_ltx1 "Sales Text
AMPRW_UEB = I_MPRW "Forcast Values
amfieldres = i_delfields
amerrdat = i_errors
exceptions
kstatus_empty = 01
tkstatus_empty = 02
t130m_error = 03
internal_error = 04
update_error = 05
too_many_errors = 06.
Otherwise try BAPI_RETAILMATERIAL_CREATE
BAPI_STANDARDMATERIAL_CREATE
<b>Reward points</b>
Regards -
Hi
This is a novice question. I want to call a BAPI in an "old" SAP version ... SAP version 4.6 . Is this possible ? .. Can someone point me in the right direction as to how I might do this ?, if indeed it is possible. I have looked at the JCo Connections but it doent seem obvious.
Thanks
DamienHi,
Yes you can call the BAPIs from the 4.6.
That doesn't different but some of the table fields are not avail that's all.
Thanks,
Lohi. -
Data types in SAP version 4.0
Hello
I have a requirement of copying a program from SAP version 4.7 to version 4.0.However String data type is not supported by version 4.0.
What are the data types in version 4.0.?
Is there any substitute of using sring data type in version 4.0 as I have to store a value
whose length can be even more than 500 characters.
Thanks and RegardsCheck the links:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/difference-between-the-sap-40b-and-sap-47-ver-567929
http://www.jt77.com/human/resources-23860.html
http://www.thespot4sap.com/Articles/SAP_Enterprise_4point7.pdf
Need advice/assistance with kernel upgrade planning
Reward if useful -
Hello
In ABAP context, what are the differences in SAP version 4.0 and 4.7.
Is there any diff in data types,FM's or other functionality?
Regards
DavinderCheck the links:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/difference-between-the-sap-40b-and-sap-47-ver-567929
http://www.jt77.com/human/resources-23860.html
http://www.thespot4sap.com/Articles/SAP_Enterprise_4point7.pdf
Need advice/assistance with kernel upgrade planning
Reward if useful -
Where to check SAP version in server
Hi,
I am new to SAP and I would like to know how can I check my SAP version in development server whether it is R/3, mySAP or Netweaver 2004s, SP stack 8 and my Enterprise portal version.
I know that it is 4.7, is it R/3?
Does it mean that if my company have installed EP and BW, SAP system will become Netweaver?
best regards,
yingHi Ying,
Thanks for the points and for more info on 4.7 architecture check the small link for a nut of Info
http://www.thespot4sap.com/Articles/SAP_4point7_Architecture.asp
a read can give u more insight on the topic
Br,
Sri
Award points for helpful answers -
Sap version what is the difference between 4.7ee and 6.0
Hi Gures
Now I am working in 4.7ee version but next month onwards in my company they r going to use 6.0
so I want to what is the canges with 4.7 to 6.0? as well can u give details about new g/l concept?http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Please use above mentioned link, you will find the delta functionalities between various SAP Versions.
Regards,
Ravi -
Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6
Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
YogeshDear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen. -
How to zip a text file and send as email attachment in SAP version 4.6c?
Hi Guru,
How to zip a text file in SAP version 4.6c which doesn't have class CL_ABAP_ZIP?
Please help.
Thanks & Regards,
AriHi,
Try this link
[http://sap.ittoolbox.com/groups/technical-functional/sap-dev/sapr3dev-zip-file-from-sap-1707099?cv=expanded]
Cheers,
Surinder -
Transfer the Pur Order Info through BAPI's between SAP R/3 Systems Using XI
How to Create a Purchase Order for the Vendor and transfer this data through BAPI's between SAP R/3 Systems Using "Exchange Infrastructure(XI)".
Please kindly let me know the procedure for creating BAPI's and how to transfer this information between SAP R/3 systems. Please kindly mention the NAVIGATION for this scenario.Hi Revathi,
If you want to do an IDOC to IDOC scenario, then the Points to be noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. You do not need a sender IDOC adapter, and no sender agreement, but a receiver IDOC adapter and a receiver agreement is needed.
IDOC -> File scenario ref:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
File -> IDOC ->
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
(It concentrates on XSLT mapping but also gives an idea about the configuration part. Do go thru that, it might help you.)
Apart from this if you need any info on how to configure your ALE, partnet profile,etc drop me a mail, I have excellent tutors that can help you in the same.
Regards,
Bhavesh -
Input Tax - difference between sap version 4.7 and version 5
Hi All
I done total customising of input tax on sap version 4.7 as well as version 5.
now I want to enter following invoice through t.code F-43:-
Raw Material Cost 50,000.00
Add:- Excise 8,000.00
Add:- E.Cess 240.00
Add:- Vat 2329.60
So we are to pay to vendor Rs. 60,569.60.
Now when use sap version 4.7 & run t.code F-43, then if I enter Rs. 60,569.60 against g.l of vendor & purchase, then system accept it.
But when I use sap version 5 & run t.code F-43, then I have to enter Rs. 60,569.60 against g.l of vendor & Rs. 50,000 against g.l of purchase, then only system accept the entry.
why so. Plz clarify
With Regards
Deepak Garg
Mob 9213784161Hi,
there are lot of changes like i observe
1, in rebates there is no advanced rebate processing in 4.7
2. there is no scale group field in condrecords of agrement in rebate agreement.
3. there are lot of new reports available in SIS
4. in sales returns process also seperate config available in 6.0
regards,
sk -
Step by step bapi to convert SAP to XML please its urgent
step by step bapi to convert SAP to XML please its urgent
full points if with full example and coding in ABAP,
Thank you,
Regards,
Jagrut Shuklayes i want to convert Catsdb table into xml format and safely in server, i.e secured place
-
SAP Version to be added in the subject line while posting a question.
Hi,
We all have been posting and answering thousands of questions on the SDN. Many times I have seen moderators asking the person who posted a question to use a correct and informative subject line.
With respect to that, I would like to suggest the moderators to add a rule in the rules of engagement asking the users to provide the SAP Version in the subject line while posting questions.
This way the person answering the question can appropriately provide information based on that version only and would save the time and effort of everyone.
Example subject line can be :
ECC 6.0 Function module xyz is not returning correct results.
I would like to know the opinion of other users too on what they think about this suggestion.
Best regards,
AdvaitIn theory - a very good idea.
In practice - hard to enforce.
On second thoght, it could be a required parameter. It might have the added benefit of dissuading questions from people who can't figure out which version they have
Rob
Edited by: Rob Burbank on Jan 16, 2009 3:56 PM -
What is user name and password for SLES10 SP1 SAP Version
Hello,
In order to install SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition , I download SLES10 SP1 Vmware SAP version from novell, when I played SLES10SP1_Test_Drive.vmx,
the suse linux enterprse server was start. It asked me to input user name and password. I input slesuser and password is novell. But it was not correct. Who knows what user name and password I need input?
any help ?
Best Regards,
GeorgeHi
I have the same issue, I tried user root and password root doesn't work I've tried couple fo "stupid" word or root user but didn't work
Looks like we both missing file "index.html" so I suppose this is bug from Novell and SAP
I will let you know if I found anything.
Peter
See this forum you question
Where to download SLES10 SP1 SAP Version? -
Hi all,
I tried to add new SAP versions (e.g. ERP2004, 2005) to the drop down list in landscape configurator in control center but they are not visible.
I added new modified xml files ( copies of R3.47.200.xml) to setup/com.sap.b1i.repository\SysType.xml folder and Patch folder too but nothing goes on.
I don't know, if it is important to change or add newer SAP Versions but I would like to do this because of better documentation.
Has anybody tried this successfully??
The workaround which is described in this posting: SAP Business One Integration Technology does not work for me.
Regards
RaykoHi all,
now it is official. I wrote an message to SAP support regarding this issue and the reply is the following:
sorry for the delay in getting back to you, I was double checking with t
he development department just to be sure of teh reply.
<b>Unfortunately ERP2004/2005 is not supported in the current release.</b>
It is very helpful to get information about inserting new entries in dropdown list of control center but they are for nothing because B1i does'nt support this SAP releases. Thanxx god I can connect to 4.6C ( which is out of maintenance) but not to the both newest releases of SAP ( ERP2004 comes up 3 years ago!!!)
Ok , 2 weeks of trying and working for nothing. It seems I have to wait nearly 2 or 3 years until our current SAP release is supported.
Thanxx Eddy for help. See you 2008
PS: on Cebit 2007 SAP sales team told me: of course ERP is supported!!
Maybe you are looking for
-
So, I'm trying to print a detail sheet that has a few client details refenced as raster images among our own details. Made a PDF using Adobe PDF. Unfortunately, when printing the PDF of this sheet, somehow the raster details get scaled down and a hug
-
Add video feedback to quiz question
There is a presentation demo on the Adobe site called 'Breeze for Rapid-training' which has a question and when answered, plays a video. I cannot seem to find any information to do this. how is it done? Thanks Michelle
-
Hieroglyphics instead of text on pages
When I open some websites in Safari some of the text looks similar to Egyptian hieroglyphics. Examples being hotmail on msn, yahoo messenger How can I cure this? Pip
-
Validating Flex2's automatic DragDrop
I have a Tree using Flex2's built-in management of drag and drop, i.e. , like this one in the docs: http://livedocs.macromedia.com/flex/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=L iveDocs_Parts&file=00000960.html How can I edit this so tha
-
Event controll: How to stop a running while loop inside a event structure
Hello, I have some problems with controlling a while loop inside a event structure (see attached VI). I habe 3 buttons ("Start Measurement, Stop Measurement, Quit Program"). When a measurement is running, it should be possible to stop the measurement