BAPI_POSRVAPS_SAVEMULTI3 and orders from vendor

Hi,
I have some code which updates an SNP order using BAPI_POSRVAPS_SAVEMULTI3. It seems to work ok for normal STRs
(where I specify both RECEIPTS and REQUIRMENTS tables), however I have run into a problem when it needs to change an order from a Vendor rather than a Terminal. As far as I can see from the documentation, I do not need to specify a REQUIREMENTS table for proc_type '0' - however if I only specify the RECEIPTS order it seems to end up deleting the SNP order instead of changing it...?!?
Is there an example anywhere of how to use BAPI_POSRVAPS_SAVEMULTI3 with vendor orders ?
Thanks
Ian

No - trying it with proc_type zero and it isn't working. Do I need to be
specifying anything other 1 line for the destination plant in the RECEIPTS table ?

Similar Messages

Replication of quotation and order from CRM to ECC

Hi experts,
We are trying to replicate a quotation and order created in CRM to ECC. We have maintained the same transaction types and item categories in both ECC and CRM. Is there anything else that is required to be done for proper replication??
Now while trying to replicate, we are getting this error: "Partners from account group 0005 are not permitted for partner function BP (Notification E VPD 000)"
How to solve this??
Please Guide.
Regards
Aakshi Suri

We maintained Partners from account group 0005 for partner function BP. Now we are again getting these errors:
u2022     Account Assigment Object Successfully Assigned to Item 0000000010 (Notification S C( 312)
u2022     SALES_HEADER_IN has been processed successfully (Notification S V4 233)
u2022     The sales document is not yet complete: Edit data (Notification W V1 555)
u2022     Sales document 0005000080 was not changed (Notification E V4 219)
u2022     Status "Obsolete status" of material 101123900 does not allow external procurement (Notification E ME 053)
u2022     Error in SALES_ITEM_IN 000010 (Notification E V4 248)
Is there any place where we can check the notifications??
Kindly help us in resolving this error.
Regards
Aakshi

RESET Apple password to install updates and order from Apple Store

need to know HOW to reset my APPLE password so that I can UPDATE Flashplay to reset my APPLE password so that I can UPDATE Flashplayer, order from Apple Store and other things. Keeps asking me for "old password". I don't remember. Help?R

Not sure which password you mean. This is for the admin password for the computer. Then is instruction for your Apple ID and password.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac
Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

Cancel Apple iPhone 4 order, and order from AT&T Website?

Do you think it will ship quicker if I order from the AT&T site? because it says 7-10 days estimation. Any concerns! Thanks!

I Just spoke to an AT&T advisor online, and they told me if I order today, it will be delivered by Friday because they offer FREE Overnight Shipping!
Im gonna try it, and update on results! Becuase I really dont want to wait till mid July...

Partners are not automatically flowing in to UB Purchase Orders from Vendor

Hi Gurus,
We have an issue where in even though we have maintained the partners in vendor master, the same is not flowing in to Purchase Orders with UB document type Purchase Orders. User has to select the partners manually from the drop down. This is not the case with NB document type Purchase Orders.
Please advise as soon possible.
Thanks,
Shashidhar

Hi There
Seems you have not assigned the Partner schemas to document types,,
SPRO-Materials Management-Purchasing-Partner Determination-Partner Settings in Purchasing Documents-Assign Partner Schemas to Document Types
Check overthere,,
Thanks
Senthil

Intercompany Text-Based Standard Purchase Order from Production Order

We have a business scenario where a material is made in a plant and then another plant performs a service on that material. The customer wants the purchase requisition that is created from the production order from the producing plant to apply a vendor that is an intercompany vendor.
The issue is, these purchase orders are text based purchase orders. This process works perfectly when there is a material master.
Scenario:
Plant X = Production Order to make Material A
Plant X = Production Order creates a purchase requisition in Plant X; Intercompany Vendor is assigned
Buyer = Creates the purchase order from the purchase requisition
Error Message: SAP issues an error message that this vendor cannot be used.
We are looking for a way to create a text based purchase order (that represents a service) and assign to a intercompany vendor.

The exact error message we receive is:
Diagnosis
You are entering an ordering transaction involving a vendor to whom a plant has been assigned. Normally, materials would be supplied by one plant to another in such a transaction.
This process involves a delivery and billing document in the SD system. The PO for this appears directly in the delivery due list of the issuing plant (vendor) and therefore does not need to be transmitted.
However, items without a material master record cannot appear in the delivery due list.
Procedure
Items without a material master record can only be ordered from vendors without a plant assignment.
The point is if we create a vendor without a plant assignment, how can the inter-company posting be accommodated.

PR: Procurement w/o material from vendor with plant assignment not defined

Hi,
Getting the error message: 06806 - Procurement w/o material from vendor with plant assignment not defined
while creating the PR with account assingment (P- project) & without material no. instead entering the short text in the PR.
this issue (Error message) is getting to only one user.
question-1: Is it possible to set the Error messages to the user specific. Because other users are able to create the PR with the above inputs, but the one user is not able to create instead getting the above E- Msg.
question-2: Is it possible to set the messages to Plant specific instead quesiton -1 or both
Or else, please let me know how to deactivate the above E-msg to the specific user.
Please do the needful asap.
Regards,
Sapsrin

Hi,
As you noticed, note 856962 has changed the system behaviour
when you are working with procurement w/o material from vendor with
plant assignment.
Items without a material master record can only be ordered from vendors
without a plant assignment.
This note will stop your users from creating service purchase orders
for a vendor who has a Plant assigned in the vendor master, issuing
the error message 06 806.
you can check the below code:-
LMEPOF23
IF ekpo-ematn IS INITIAL AND
      ( aktyp EQ hin OR ekko-reswk NE oekko-reswk OR      "856962
     ( aktyp EQ hin OR NOT ekko-reswk IS INITIAL OR        "856962
        ekko-bsakz NE oekko-bsakz OR
        gf_extended_check NE space ).
    PERFORM enaco_2(sapfmmex) USING '06' '806'.
regards,
Lalita

Distinguishing PIR related planned orders from Customer related.

Dear all, what could be the best way how to distinguish planned orders generated basing on PIR from ones generated from real Customer Orders. The main idea behind is to make sure that orders generated for real customer orders are processed with first priority and orders from PIR with second. Thank you. Regards,Andrey.

Hi ,
System will not always create one plan order for one demand. If lot sizing procedure is WB-Weekly lot size , it wll generate one plan order for customer orde r& PIR falling in same week. Hence , there is no flag or field which will help identify which Plan order is feeding what demand /how much qty of demand.
You should look at altering Planning strategy. If you implement Make-To-order strategy(20, 50, 59 ) , system will create Planning segment(Blue color seperator in MD04 screen)
System will ignore lot sizing procedure & always create one plan order for one demand.
Alternatively , you can implement SAP-SCM which has pegging reports & priority based processing.
Hope it helps,
Jatin

GR and IR from different vendor??

hi experts
Can anybody give some idea to how to go about the below scenario.
I have to create 1 PO to x vendor for 100/ea quantity.
X vendor he 'll distribute the same some 50 vendors and advised to send materials and invoice to me with ref to 1 PO.
So, i 'll be doing GR and IR from 50 different vendors lik per vendor 2 quantity . ( Like third party).
By keeping reference of 1 PO , i have to do GR and IR for 50 different vendor .
Any suggestion and solution in SAP.
Thanks
SAP-MM

Hi,
U can acheive this via Partner Function.
There U can give the ordering Address(OA) and Good Supplier(GS) as different vender
and PI(invoice Party) as one vender.
Suppose you get material from different vender and Invoice from other vender.
Hope Help U !
Regards,
Pardeep Malik

How to reverse from quality and change the vendor account.

I had made GR, but posted wrong entries, instead of doing one vendor account & i had made in other vendors account, this lot is passed by quality also that means it UD is also done.
how to reverse from quality and change the vendor account.
Thanks and Regards

hi Raj,
Reversing Stock Postings Locate the document in its SAP Library structure
   1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
   2. In the field for the movement type, enter
   3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
Note
You can copy the purchase order number from the inspection lot.
   4. Choose Enter to display the selection screen for the purchase order items.
   5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
   6. Save the goods receipt and exit the Materials Management component.
   7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
   8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
   9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.

Two materials ordered separately from vendor to be used as single material

Hi All,
Suppose there are two materials say A and B which are ordered separately from vendor and then placed in storage location as two diffrent stock materials.
But while issuing the goods, these two materials A and B need to be combined as different material C and has to be issued against.
Please let me know if there is any possibility of such scenario.
Regards

Hi,
Two materials A and B which are ordered separately must be created with same material type(say ROH) & a different material C must be created with a separate material type HALB.Now can keep /create BOM for material C where you can mixing combination of materials A and B.
You can issue now material C after mixing of materials A and B.( after receiving to warehouse).Just get help from PP consultant.
Regards,
Biju K

Ordered 15" Macbook Pro Retina from AAFES/backordered from vendor

Just wanted to kow if anyone has had this or similar issue ordering from the AAFES (Army Air Force Exchange Service) online store. Follows is my situation and the frustration I am currently experiencing. If anyone can give my some feedback or insight, I would appreciate it because I am getting nowhere with AAFES and I am at my wit's end. Who exactly is the "vendor" for AAFES and why would a Macbook Pro be on backorder for over a month?
I ordered the 15" MBP w/Retina display, Intel Core i7, 2.6GHz, 512GB on 26 October and was given an estimated ship date of 2 November. I also ordered an external drive and Apple Care. The first issue was that the external drive I ordered was no longer available from Apple and I never received any word from AAFES until I contacted them when the "estimated" ship date had come and gone. Then, after extensive email traffic to and from service reps with AAFES, I finally was informed that the MBP was backordered until 26 November. Long story short, after the "estimated" ship date has changed three times, I am now being told that the MBP is backordered until 3 December. I am a deployed US Soldier in Afghanistan and in addition to the inconvenience of not having a working computer to commuicate back home and the fact that the shipment of anything with lithium batteries has been banned, I have had to do business with AAFES knowing that they are notorious for horrendous customer service, but they are the only company that can get me a computer that is close to what I want here to an APO address. To date, AAFES has had my 2700+ dollars for over a month and I can get no clear answer to when I will receive my MBP or if the backorder date will continue to move further into December. Does ANYONE know who their "vendor" is and a way to know why this item is backordered?

Hey there Ian.S,
It sounds like you would like to know now to transfer your data from one MacBook to another. You can indeed use a Time Machine backup to transfer the data, and there are a couple of other options as well when using the Migration Assistant. This article will help you determine the best option for you, and walk you through the process:
OS X: How to migrate data from another Mac using Mavericks
http://support.apple.com/kb/HT5872
Thank you for using Apple Support Communities.
Take care,
Sterling

Production order with components consumed from vendor consignment stock

Hi expert,
I have a production order with components and some of the components should be consumed from vendor consignment stock.
When the order is created/released : is there a possibility to have those components created with "special stock indicator" = 3 (consignement stock) by default?
Thanks,
P.

Dear Pete,
In my understanding it's not possible to populate this value as 3 - consignment stock in the component overview.This has to be
done manually.
Check in this way,by indicating a value in any of the material master field(for eg ABC indicator in MRP1 view) and if there's some
value,then while saving the system populates for all those materials with this value as 3 by using some user exit or BADI.
I'm not sure,it's only an idea,check and revert
Regards
Mangalraj.S

A MacBook Air was reported stolen From a room at my hotel that belong to a guest. I request a apple Id and password from the guest in order to track it though iCloud, when I login into the account the MacBook was not their, however I saw other device. A f

A MacBook Air was reported stolen
From a room at my hotel that belong to a guest. I request a apple Id and password from the guest in order to track it though iCloud, when I login into the account the MacBook was not their, however I saw other device. A few days has past then the MacBook appear. How does that happened, please explain?

For a stolen Macbook to appear in iCloud - the person who stole it must turn it on.
You can't track something that's turned off.

Replication of BP and Sales order from CRM to R/3

Hello everyone,
I have a peculiar condition in my hands.The requirement is to replicate 10 business partners from crm to R/3 ,then the next 4 Business partners need not be replicated and then the next three replicated..How do we do this kind of replication....
One thing more regarding the replication of sales order.When we save a sales order in CRM,is it automatically replicated to R/3 or do we need to release it manually??
If yes,then if we do not want to replicate the sales order from crm to R/3,then what will we do?
Consider that all the middleware settings are configured and working fine..
Puneet

Hi Bokhal,
Please consider my answer from your recent thread dealing with apparently the same issue :
Hi Bhokal,
For filters in uploads please consider below:
For Filtering the BP-upload, use the Administration Console
(tx. SMOEAC) in the corresponding subscription of the "All Business
Partners (MESG)" publication assigned to the R/3 site.
Some publications (and the replication objects they are based on) are
delivered as type "Simple bulk" which does not give you the opportunity
to assign criteria values for filtering.
You might have to re-create the publication. To do that:
1) First delete the subscriptions "All Business Partners (MESG)" and its
publications & the replication object.
2) Recreate the replication object as type "Simple intelligent".
3) Afterwards you can create a new publication via wizard of type
"Simple intelligent (msg)" assigned to the BDOC-Type BUPA_MAIN. Then,
you will be able to select some "filter criteria".
The reason for deleting the "old" publication is, that you
are not allowed to assign a BDOC-Type to more than one publication.
4) But please keep in mind that there is no realignment supported. So
you should only use fields for filtering, which cannot be changed
afterwards.
This is the "simple" solution for filtering on fields. This
will not provide complex filter criteria.
If you need this, you shall create a filter function in R/3- and/or
CRM-Inbound and -outbound.
If you want to keep the control about the upload trigger, you can add an
additional module in transaction CRMC_BUT_CALL_FU, position > 200000.
BUPA_MWX_BDOC_BPS_FILL_CENTRAL. Within this new module, you can delete
all partners within the complex structure that you don't want to upload.
Hoping that above will be helpful.
Best regards
Christophe Sturzel

BAPI_POSRVAPS_SAVEMULTI3 and orders from vendor

Similar Messages

Maybe you are looking for