BAPI Required for MRN9 Data

Dear all,
I want to import MRN9 Data into my ABAP Program.
is there any BAPI function available.
or i have to create a zcopy of it and use export import function.
Regards,
Gaurav

I have resolved the issue by making copy of the MRN9m program and exporting data fro Use

Similar Messages

BAPI/FM for uploadng DATA in CS40

Hi
Any BAPI/FM for uploadng DATA Thru CS40 T code
Regards
Rasheed

try this
BAPI for filling variant configuration in an equipment

Requirements for master data template

HI,
Please let me know the basic requirements for master data template. What all the infotype to be involved in collecting master data template.
Thanks and regards,
Aylwin

Hi Alwyn,
If you dealing with india payroll definately Yes subject to you business process again.
Even though it is indian payroll some item may not applicable
For exmple other income resourece will be if you go to manufaturing industries you may face problem even though they got some they don't want reveal it to the employee.
in such that infotype is not required as per your business process.
Some states like UP there is no profession tax. Genrally we say profession tax need to be configure you need that master data.
If such case that might be wrong for that you need to give all the info
use PA30 t code go in side check what are the mandatory fields and take them as master data fields and put it in template.
If your client is able to give other field you can very well add them no harm in it.
But make sure you filled mandatory fields
That is the reason i was asking you to tell which coutry payroll you using
Best Regards

Master Data Required for 2LIS_02_HDR Data Source Installation

Hi All,
We are trying to install 2LIS_02_HDR DataSource through BC for our purchasing implementation . Can you suggest what all the Master Data required for this Data Source.
Regards,
Aditya

Hi ,
Please see this link.
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
In the same page you can find all details.
Hope this helps.
Thanks
CK

Are there requirements for deterministic data messaging for distributed LabVIEW applications across an Ethernet/IP network?

Our company, RTI, just entered the Alliance program at NI recently. We are curious if power users of LabVIEW have requirements for running distributed, networked multiple LabVIEW applications in a real-time, deterministic manner? We are not attempting to make this a sales call, but if we should move forward with development of VI's that would allow distributed LabVIEW applications. We have already scoped out the effort but would desire guidance on VI layout, descriptions and ways to give a "LabVIEW" experience and not a disjointed VI that looks unprofessional. We are not sure if demand exists for this requirement. We would like to talk with
and investigate what LabVIEW users want. We have attached a brochure on this real-time data messaging technology for your review. Maybe there is no need and we apologize for taking up NI Developer Zone bandwidth and your valuable time. We look forward to your responses.
Attachments:
NDDSProductBrief3-022.pdf ‏299 KB

We are developing applications which have a distributed layout. E. g. we have 2 or more test places which have no user interface and 1 place where all configuration and monitoring and data storage takes place. We use TCP/IP for the inter computer communication. For this purpose we have developed a library which has a similar interface and usage as the queue VIs from LV 6.0.2. We support automatic reconnect on TCP/IP level and an acknowledged transfer so the application programmer can choose to do some temporary storage on the local machine if the server part is not running for sometime. We have not seen any market for that so we do not plan to sell it.
From a lecture at the NI VIP days in Munich in 2001 personal from Siemens A&D stated to
get a real time like behaviour over ethernet with TCP/IP you have to take care that the load will not exceed 30% of the bandwidth.
For more information you can contact me at [email protected]
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

BAPI required for incoming vendor invoice (without PO)

Hi,
Which BAPI can be used to post a "vendor invoice" ie.like a utility bill where there is no PO or GR ?
The few BAPI's that I have searched and obtained is:
1. BAPI_INCOMINGINVOICE_CREATE
2. BAPI_ACC_INVOICE_RECEIPT_POST
Our exact requirement is to have a BAPI which can take the following fields as input:
GL Account
Cost Center
WBS element
Material No
Customer
Tax Code
Trade Partner
Customer group
And give the following data as response
Verification number in SAP
Payment status
Vendor master data
Kindly help me to find the correct BAPI.
Greatly appreciate your help.
Thanks,
John

Hi,
When we use BAPI_ACC_INVOICE_RECEIPT_POST for posting an invoice without a PO, we are facing major issues.
We have to input vendor account number and the amount. This should be entered in 'ACCOUNTPAYABLE'.
Even though there is the field 'VENDOR_NO' for entering the vendor number, there is no field for entering the amount !!.
Kindly help me to identify where I should input vendor amount as input (either in 'ACCOUNTPAYABLE' or elsewhere).
Also, I am entering GL account number in field 'GL_ACCOUNT' in the segment 'ACCOUNTGL'. But there is not field to enter the amount.
Kindly help me to identify where I should input GL account amount as input (either in 'ACCOUNTGL' or elsewhere).
Thanks,
John

BAPI /BDC for contract data VA41

hi all,
We have a requirement. We have Contract data in legacy system, and need to migrate that into SAP (VA41). Should i use BAPI or BDC for this.
If i have to use BAPI, Please let me know the BAPI name.
Regards,
Kavitha

Hi Kavitha,
May be this thread provides you some help.
Have a look.
Link:[Thread|Re: Creating Contracts using BAPI_CONTRACT_CREATEFROMDATA;
Have a best day ahead.

FMS required for Posting Date + 4 week excluding weekends

Hi,
I have a UDFas U_FRDWDT in which I want that if the Sales Order posting date is 15/12/2010 then this udf should automatically update + 4 weeks EXCLUDING Fridays and Saturdays which is there in the 4 weeks hence the result should be e.g 27/01/2010 which is excluding Fridays and Saturdays.The requirement is as such that Friday and Saturday are holidays for the company and the client wants to have this field updated on + 4 weeks basis but it should not consider Friday and Saturday as its holiday.
Also note in SAP base setup Holiday Master Weekend is set from Friday to Saturday. Will this help in any way of updating the field or through formated search.
Kindly advise what best solution can be given
Regards,
Soni

Hi Gordon,
I used this formatted search and seeing some discripencies as if lets asume the Sales Order Posting Date is 15/12/2010 then 4 weeks should come in the udf means excluding friday and saturday and the date which is coming as per fms is 12/01/2011 but i guess the fms should show 25/01/2010 which is 4 weeks ( no of days 30 ) excluding friday and saturday. I think your fms is just brining 22 working days and then its showing 12/01/2010.
I want the fms to consider friday and saturday as holiday and then give me 4 weeks.
I hope i am clear to my requirement and able to make you understand.
Regards,
Soni

Error in BAPI 'BAPI_PPMSRVAPS_SAVEMULTI_30A' for PPM data change

Dear All,
I have a assignment to upload variable cost against Plan number for a particular product and location in PPM master data.
I have used a bapi 'BAPI_PPMSRVAPS_SAVEMULTI_30A' to update cost in SCM 5.0 version.It works fine,but if i use same bapi in SCM 4.0 it doesn't work and throw following error:
1.Plan number is already exit.
2.Plan couldn't found.
but all entries are maintained in master data leaving cost that i have
to upload.
I have to update cost only in SCM 4.0.
Please help.
Thanks
Mohit Khandelwal

Hi,
Refer:
* BAPI to change the PR details
    CALL FUNCTION 'BAPI_REQUISITION_CHANGE'
      EXPORTING
        number                = v_banfn            "<--PR Number
      TABLES
        requisition_items_old = it_old_detail      "<--pass in old PR details
        requisition_items_new = it_new_detail      "<--pass in new PR details
        return                = it_return_change. "<--return table
*   "read for error message while changing details for PR
    READ TABLE it_return_change INTO wa_return_change WITH KEY type = 'E'.
    IF sy-subrc = 0.
      "check for ERROR
    ENDIF.
Hope this helps you.
Regards,
Tarun

To Understand requirement for master data

Hi Experts,
i am given a requirement to create a master data   and was asked to do below
Extraction from r/3 for the new object ZCPAR
Similar to ZNTORD (get key & text from 0COORDER)
Restricted to Order type Z040 only
and
Based on value of ZCPAR_ZCFAM and ZCPAR_ZCTYN
     update attribute ZCFAM_ZCTYN
How do we do that please guide .
Thanks In Advance,
Nitya.

Hi Nitya,
Just create a char infoobject ZCPAR with required Datatype & length. In the IO properties screen, you will find a tab Master data attribute/text. Just make sure that the check box "Attribute" is checked/ticked.
Loading is same as loading any other BW DS. Just create a Infopackage & load to DS. create a Transformation from DS to MD IO ZCPAR & load the data using DTP.
Similar to ZNTORD (get key & text from 0COORDER) Restricted to Order type Z040 only
Similar to 1st point. Make sure both Attribute & text is checked. You can restrict for Order type either is Infopackage or you can write a small field routine in transformation like
IF Order type EQ Z040.
Result = 'XYZ'.
ENDIF.
Based on value of ZCPAR_ZCFAM and ZCPAR_ZCTYN update attribute ZCFAM_ZCTYN
Simple field level routine for ZCFAM_ZCTYN.
IF ZCPAR_ZCFAM EQ 'XYZ' and ZCPAR_ZCTYN EQ 'XYZ'.
RESULT = 'XYZ'.
ENDIF.
Note : Replace 'XYZ' with suitable values
Hope its clear & helpful!
Regards,
Pavan
Edited by: PavanRaj_S on Dec 26, 2011 2:45 PM

BAPI Required for Plant to Plant Transfer using HUMO

Hi
I need to tansfer many materials from plant to plant it will be more than 5 lakshs line items.
All these materials are Handling Unit managed materials and need to use WM transaction HUMO to transfer this materials.
Is there any BAPI available to process this transaction?
Please let me know if anyone faced the same situation.
Thanks

Hi There,
Couple of options here
VLMOVE is the standard transaction for moving HU (Although these are at the IM level this means that the WM activity is ignored, so no WM requirement is created)
HU_CREATE_GOODS_MOVEMENT
GN_DELIVERY_CREATE if you want to create a delivery to instigate the movement
I think you may have an issue at the warehouse level with these though
Cheers
Steve

BAPI required for VF02

Dear All,
Required
BAPI for Release to accounting (VF02),
BAPI for Shipment Cost delete
BAPI for Shipment Doc delete
REgards
Ranjit

Ranjit,
VF02-BAPI_CO_DOC_GET_ACT_POSTINGS
SHIPMENT -BAPI_SHIPMENT_CREATE
SHIPMENT COST-BAPI_SHIPMENT_COST_ESTIMATE
But Please Check from Ur ABAPer before using these..
<REMOVED>
Regds
MM

CAT2 - Help required for changing data

The requirement I have is, if the data is entered for a particular activity type in CAT2, and if it exceeds the default hours alloted for that week, the extra hours need to be split into different activity types.
Say, this is the data entered: (Max of 35 Hrs per week as per IT0007) (Click on the link below to see sample data!)
[http://img32.picoodle.com/img/img32/5/12/21/f_datam_9dfadb2.jpg]
(The value for Thu is 5 and not 6 in the initial entry.)
The data has to remain exact until it reaches 35 hours and then the extra hours need to be split and entered in a different activity type. (BU is also counted as regular working hours and value for BU is to remain same)
I tried using the user-exit CATS0002 but since the user exit gets only the value of a single cell at a time, I am not able to process the data for my requirement. and this user exit is triggered only for the cells where the value is changed... if the data is already entered and the user changes some cell, I don't get the whole data entered and hence, I can't modify the already existing data on the timesheet.
Has anyone coded for a similar scenario? Your help will be really appreciated.
P.S: I am working on ECC 6.0

Hi Nazim,
There is an user-exit for validating the whole time sheet (I think it is nr. 6, but I am not sure), in this one you could check all the hours, but I am not sure if it will suffice for your requirement.
Regards,
Martin

Data Not coming Properly for 0HR_PA_OS_1 Data Source?

Hi Experts,
I am trying to load data to 0PAOS_C01 using 0HR_PA_OS_1 data source. For field 0POS_OCCVAC key figure i am not getting any data from Data Source.
I checked in RSA3 for 0HR_PA_OS_1 data source and in that it is not populating data for filed OCC_VAC_PERC field. I checked with HR functional team and they mentioned its a BI issue.
Kindly tell me how can i populate values for the particular field. FYI i am getting correct data for other fields.
Please help me.
Thanks

The possible reasons
1.Your user id might not be having the proper authorization to pull the HR data.This you can confirm with your basis guy,if you are unable to find what are the authorization roles required for HR data, for the time being you can take SAP_ALL authorization in development box and try to pull.
OR
2.Try to pull from BW side,you may be able to see the data there because this uses the background user id used in RFC connection ( provided if your background user id having proper authorization ).

Input needed for writing data back into BW/ECC data

Hello Everyone,
Can anyone please let me know an example or process you have used for writing data back into BW (DSO/Cubes) or ECC systems.
We do not have integrated planning in our current system configuration currently.
So, any sample code for using any of the BAPI/RFC for writing data would be appreciated.
Also, I am trying to find out if there is any way to schedule the models developed in VC 7.1 in background to automate certain type of data processing which goes across multiple systems.
Any help would be appreciated.
Thanks.

Hello,
Can anyone please help me out on this one....
I am aware of few BAPI's such as RSDRI_ODSO_INSERT_RFC but I am not aware of what action has to be used to transfer the data from the table within VC to this BAPI and how to define the parameters as the one's available for the BAPI I mentioned do not fit into the data I have in the table within VC.
The following are the columns I have in the table within VC,
1. GL Account
2. Credit Amount
3. Debit Amount
4. Sales Amount
I have defined the DSO with the same where G/L Account is the keyfield and the rest being data fields.
Any help would be really appreciated.
Thanks.

BAPI Required for MRN9 Data

Similar Messages

Maybe you are looking for