BAPI_SALESORDER_CREATEFROMDAT2 Field VBELV and POSNV
Hi Friends,
i want to populate the fields VBAP-VBELV and VBAP-POSNV when i create a sales order using the above BAPI. Quick response will be highly appreciated.
Regards,
RP
With those fields , fields VBAP-VGBEL and VBAP-VGPOS are getting populated but i need thse values for VBAP-VBELV AND VBAP-POSNV also same as VGBEL and VGPOS.
When i create sales order from VA01 with reference to contract the values for VBELV and VGPOS are same as contract. But when i create a sales order with
BAPI i am able to populate only VGPOS and VBELV is coming with Sales order number itself.
Ex;: contact X sales order Y.
VBAP-VGBEL
VBAP-VBELV i want as 'X". but with BAPI i am getting VBAP-VGBEL as X and VBAP-VBELV as 'Y".
I want VBAP-VBELV also as "X".
Could any ideas.
Regards,
RP
Similar Messages
-
How to get the table of value field? and can we expand the technical limits
Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!how to extend the limit of value numbers? please see the original question.
-
Hi All,
I got some output values from the legacy system with me but need to know whats the actual field name and table name to which i need to transfer these values. How can i do it, since which theres is not field name or despcription given for the data.
Is there any way i can do it.
Points will be rewarded for all useful answers.
Regards
ABif you know the transaction code you use to post the uploaded data in SAP, you just need to do BDC recording in using transation SM35. Record the whole process and create a program from the recording... and you wont even need to know the tables and field names-- almost everything will be done for you....
All you need to do is replace record data with upload data.
You can also try to look for a standard Function Module / BAPI which can do the processing for you and provide it with a table containing the upload data ...
Reward points if useful -
How to populate fields "DocEntry" and "DocNum" in UDT? Those are not UDF.
I created a UDT with document type. When I populate the data, I don't know how to populate fields "DocEntry" and "DocNum". Those are not UDF. Here is my coding. Can somebody help me out?
Dim objUserTable As SAPbobsCOM.UserTable
objUserTable = objSBOAPI.oCompany.UserTables.Item("AIT_POSTRANS")
objUserTable.UserFields.Fields.Item("DocEntry").Value ="1000"
///////////// Error here "DocEntry" is not a UDF
objUserTable.UserFields.Fields.Item("U_TrnsType").Value = "4"
objUserTable.UserFields.Fields.Item("U_CardCode").Value = objRecord.Fields.Item(0).Value
objUserTable.UserFields.Fields.Item("U_ShpBrnch").Value = objRecord.Fields.Item(1).Value.Replace("'", "")Currently versions of the SDK (SBO2005A SP01, SBO2007A, SBO2005B, SBO2007B) does not support Data Support of UDO-tabeles using the DI-API... That means that you can only add data to such tables using the GUI,,,
This is currently a huge problem and the number one DI-API Development Request. The status with SAP is that this will become part of the SDK in SAP Business One 8.8 (the next major release), but 8.8 does not yet have a shipment date (My guess is that it will be 2009 before we even see it in rampup)...
I know some people have experimented with writing direct SQL to such tables and know it can be done, but be aware that SAP does NOT support it!... Personally I've never done it for that reason althoug it would have been nice to do if some situations...
Sorry I could not give anything better... -
Flat file should have source field name and value
Hi Friends
I have a scenario of Idoc to Flat file , where in the target structure the field name and value should be present, generally only the value is available in a flat file.The target structure is as below:
for e.g RECTYPE is the Field Name and A is the value.
RECTYPE,A
DATEH,20111101
TIMEH,173125
RECTYPE,B
ORDNUM,4500054536
ORDITM,150
SUPDAT,20090218
PLNQTY,000000006
MATNR,14B300
BATCH,5697
PLANT,3026
DELIVTYPE,PO
SUPPLIER,0000023305
SUPNAME,Deutsche BP AG
SUPADRS,Erkelenzer Strasse 20
SUPCITY,Monchengladbach
SUPPOST,41179
SUPCOUN,DE
TRUCK_NBR,7589
BOND_FLG,X
STG_LOC,PLCL
LINE_ACTION,CRE
RECTYPE,B
ORDNUM,4500056721
ORDITM,10
SUPDAT,20090218
PLNQTY,000000013
MATNR,116703
BATCH,6589
PLANT,3026
DELIVTYPE,PO
SUPPLIER,0000023380
SUPNAME,DOW Belgium NV
SUPADRS,Havenlaan 7
SUPCITY,Tessenderlo
SUPPOST,3980
SUPCOUN,BE
TRUCK_NBR,7589
BOND_FLG,X
STG_LOC,PLCL
LINE_ACTION,CHG
RECTYPE,X
DATEH,20111101
TIMEH,173125
RECORDS,3Hi,
NameA.addHeaderLine
Specify whether the text file will have a header line with column names. The following values are permitted:
■ 0 u2013 No header line
■ 1 u2013 Header line with column names from the XML document
■ 2 u2013 As for 1, followed by a blank line
■ 3 u2013 Header line is stored as NameA.headerLine in the configuration and is applied
■ 4 u2013 As for 3, followed by a blank line
This specification is only permitted if exactly one structure is defined.
regards,
ganesh. -
Fields "Completed" and "Completed Date" not available in Activity WSDL
Hello All,
We dont find the fields "Completed" and "Completed Date'" in Generic / Custom WSDL provided by OnDemand
Any idea on the reasons? Any suggestions / workaround to query the above fields using Webservices?
We tried guessing the integration tags as "Completed" and "CompletedDate" but it throws error
Thanks for your help
Regards,
Venkatesan
CRMITI'm trying to WebService a large amount of activities from another system that we are converting to OnDemand. I would also like to update the completed date to match the date from the original system. I cannot find anyway to do this either.
Has anybody else?
I understand why they might not want you to update it via the UI, but via a WS it should be available. UGH !!!
Thanks ... -
Alv output to Excel with numeric fields as numeric fields only and not char
Hi,
When we download the alv output to excel format in the locat file using the toolbar button provided in the ALV, the numeric fields get converted to character format. Is there any other way or settings in ALV so that the numeric fields will be get saved as numeric fields only and not character?
Rgds,
MAdhuriany idea for above problem is welcome
-
Which table stores field names and their description?
When I go to se11; I can get information about a table; its field names and field description.
How can I access same information using an ABP Program? I have a third party tool which connects to SAP; it can pull data from any SAP Table or view. I do not know which table or view stores information displayed in SE11.
Thanks a lot.Hi zigzagdna,
The field names and their description are strored in table DD03L and DD03T.
SAP DDIC dictionary informations are generally store in DD* tables. You can search this kinds of DD* tables in SE11 using F4 search help.
With Best Regards
Julia -
Table AGR_1251: Search between a range of the field "LOW" and "HIGH
Hello Experts,
i've got a problem by searching all users who have the authority for a transaction.
The transaction was written in a parameter, called p_trans.
I've the Tables AGR_1251, AGR_AGRS and AGR_USERS.
I know what I've to do.
Here is my Join.
SELECT agru~uname
INTO CORRESPONDING FIELDS OF TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
ON agrs~agr_name = agru~agr_name
INNER JOIN usr01 as us
ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
ag12~field = 'TCD' AND
???? parameter p_trans between ag~low and ag~high????
SELECT agru~uname
APPENDING TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
ON agrs~child_agr = agru~agr_name
INNER JOIN usr01 as us
ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
ag12~field = 'TCD' AND
???? parameter p_trans between ag~low and ag~high????
SORT gt_users BY uname ASCENDING.
DELETE ADJACENT DUPLICATES FROM gt_users COMPARING uname.
Here is my question:
In my code are question marks...here i want to say, that my transaction lays between the fields LOW and HIGH.
But how can i say, that in WHERE.
I have to say... Search that agr_name, where object = s_tcode, field=tcd and where my transaction lies between.
For example: low is T and high is X and i have the transaction va21.
So i must find out, in which range lays ma transaction.
I hope somebody understands me
Thanks!
Regards,
MarcelHi Marcel,
You are mentioning it as a parameter between having low & high values. Is it a parameter or select option.
If its a parameter, then anyway it will have only single value at any point of time.
If its a select option, then you need to use
select * from
and tcode in s_tcode.
Thanks,
Best regards,
Prashant -
R12: Disable Field Quantity and Unit Price in Line Item (AR)
Hello,
Is there a setup in Oracle Receivables - Transactions where I can disable the field "Quantity" and "Unit Price" on the form for line item?
I don't have Order Management nor Inventory setup in this environment.
Note: In AP invoices, these field are disabled.
vikHello.
I don't think that is possible because the system uses those fields to calculate the Amount field, which cannot be filled in directly.
Octavio -
How to Read Idoc - Segment fields values and status messages
Hi,
I am having one requirement as i want to read the segments along with the field values and also i want to read all the status messages.
first i read the idoc data from EDIDS and segments data from EDID4 and the staus messges from T100. but still i am not getting all the status messages.
is there any other table which contains the information of IDOC segments and field values and also the status messages.
Regards,
KumarYou need to use
V_MSGNO = EDIDS-STAMNO.
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
MSG_ID = EDIDS-STAMID
MSG_NO = V_MSGNO
MSG_VAR1 = EDIDS-STAPA1
MSG_VAR2 = EDIDS-STAPA2
MSG_VAR3 = EDIDS-STAPA3
MSG_VAR4 = EDIDS-STAPA4
IMPORTING
MSG_TEXT = V_TEXT.
WRITE: / V_TEXT.
a® -
Annotation field locked and subsequent digital signatures
Hi all,
i'm testing my PAdES digital signature library in Obj-C and i encountered this kind of PDF file
http://dl.dropbox.com/u/3995257/PDF/Locked.pdf
Acrobat Reader tells that the document is locked by a signature (Signature2). As far as i know locked means that the file can't be modified but is is impossible to append a digital signature too?
I tried to sign the document with my lib and as expected the second signature invalidates the first.
http://dl.dropbox.com/u/3995257/PDF/Sign_Locked.pdf
But... i tried to sign for the third time the previous file. I would expect that the first (locked) signature would be invalid but the second and the third would be not.
http://dl.dropbox.com/u/3995257/PDF/Sign_Sign_Locked.pdf
Despite my expectations, only the last signature is avalid according to Acrobat Reader.
Does the first locked signatures invalidates the subsequents? Or more simply i can't sign a Document locked PDF?
ThanksYes, because the first is a lock – anything you do after the fact will invalidate.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 28 Sep 2011 02:11:54 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Annotation field locked and subsequent digital signatures
Annotation field locked and subsequent digital signatures
created by Luigi Cuomo<http://forums.adobe.com/people/Luigi+Cuomo> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/3942243#3942243 -
Center text in text field - vertically and horizontally
Hi to all,
I have a text field with a specific size (for example 10x10 cm) I need this size because all the fields in the report must have this minimum size and they just can grow vertically (expand).
But i need to put the text centered in the field, vertically and horizontally. just in the middle whatever the size of the box.
The parameter "Center" in justify text doesn't help. Only adjust horizontally.
Thanks in advance.
Filipe AlmeidaHello,
If you want to center vertically, you have to use an anchor .
Regards -
Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO#, Date, ect.)
When you say field, do you mean specifically a form field, such as a text field? Or is the information regular text on the page?
-
HR - dynamic selections field name and field value in the program
HI all,
I am using dynamic selections for a HR report.
I have created a view with 20 fields and added it to HR report category ___00003(All fields suppressed).
I need to check these fields in the program. But i am not able to get the field name and value in the program for dynamic selections fields.
Please let me know how to get the field names and values in the program for dynamic selections .
Thanks,
Kranthi.You have to read the itab <i>pnpdynse</i> in your Program to obtain the Dynamic Selection values. This itab has a deep structure.. you can set a break point in one of the events before <b>get pernr</b> & in the debug mode, you will able to display the itab <i>pnpdynse</i>.. you can then identify how to get the values into your code..
~Suresh
Maybe you are looking for
-
How do i sync my Ipod to my new laptop?
How do I sync my Ipod w/ my new laptop? It is apparently still registered to my now dead PC. Only some of my music shows up in the laptop library. I would like to have all my music on both the new laptop and Ipod, will not sync, even manually. How do
-
Table transformation from two different database
Hi all, I am trying to load table from one database table to another database table in ODI 10g.I have created two physical and logical topology. But when in interface design i have drag the source and target tables in the diagram window, but here it
-
I Try to purchase app but it is always saying that it is invalid post code could you please solve this problem.
-
I checked my ipod in the "My Computer", I think it still has the songs since it has still 5.6 GB that is used. But, when I operate my ipod nano 4th generation, there are 0 songs, and 0 videos. Please help.
-
I get this error when trying to start iTunes in 10.8.4 This is really anoying from a frsh install of Mountain Lion. What is going on with Apple the errors keep coming.