BAPI_SALESORDER_CREATEFROMDAT2 ...not updating quantity of all line items

Hi All,
I'm using BAPI_SALESORDER_CREATEFROMDAT2 to create a sales order where order type is having multiple line items.
All the fields are being updated in SAP correctly . But quantity field is updated only for first line item. For all other items, all fields are being updated except quantity. I checked in Debugging and all the values for all line items are coming correct.
Pls suggest me.
Thanks in advance..
Rudresh
Mumbai

Hi Rudresh
Please check if you are passing Schedule lines for the same.
Itz better if you pass item number for ORDER_ITEMS_IN. Use the same as reference for ORDER_ITEMS_INX, ORDER_SCHEDULES_IN, ORDER_SCHEDULES_INX, ORDER_CONDITIONS_IN, ORDER_CONDITIONS_INX.
Kind Regards
Eswar

Similar Messages

Invoice text(SGTXT) is not updating in payment proposal line items

Hi,
While doing payment proposal in F110, invoice text is not updating in payment proposal line items, which is available in ‘BSIK’ table.
Please find the attached screen shot. Please give me suggestions How to resolve this issue.

Hi,
The other line item accounts are revaluation accounts. So when there is no exchange rate, the amounts are zero.
Ezhil.

Originating document number not updated for one invoice line item

Hi,
We have a invoice document number in which the originating document number is not updated for one of the line items ,this is order related down payment invoice .May be this is due to system inconsistency so is there any SAP note to overcome this problem.
Best Regards,
Rohit

Dear All,
I found out the problem for not updated in F-04. "While create the receipt document in GL master Open item management maintained box was not checked". It can be found in BSIS table - OI Management'.
Is there any other way to clear this document.
Thanks...

Can it not possible that i can retrive it for all line items in a single qu

I have to make report for my application in which I am facing a following problem:
In the application there are multiple suppliers and each supplier having multiple line items and each item having multipale events. each evant having three status GREEN,RED and BLUE.
When a user select 'all suppliers' to show the the status time span for a supplier (i.e. for a supplier how many parts and upto how much time parts are in blue, red and green status)
to show the cumulative status time span I have to find out a event for each line item which is having nearest lower entry time from the lower part of the given time span.for this i have write following query
SELECT * FROM parts_events
WHERE vendorid = ? AND partid = ?
AND visible = 'visible' AND active = 1
AND entrytime = (SELECT MAX(entrytime) as
entrytime from parts_events
WHERE vendorid = ?
AND partid = ?
AND entrytime < ?
AND visible = 'visible'
AND active = 1)
the problem is that i have to fire this query for each line item, can it not possible that i can retrive it for all line items in a single query?

maybe if you can post some sample data and output will help us analyze more youre requirement.

CK51N updates SO cost estimate but not the status of SO line item

Hi All,
Ours is a MTO scenario with Sales Order costing. When we execute the Order BOM cost estimate in CK51N the cost estmate is updated in tne sales order line item but the status of the Sales Order line item remains "to be costed". Please advise is there any config setting for the status update of Sales Order line item when the ck51N is executed.
When i do the Sales Order costing in VA02 --> Extras --> Costing. The staus of the Sales Order Line item gets updated automatically.
Regards,
Rajeswari shankar.

Hi,
In general for MTO Scenarios, you would do the sales order costing from VA02 only.Once you get the cost,then in the left corner,there is a symbol for markup the price,by clicking on which you would mark and release the price.

Profit Center is not getting captured in Vendor line item from MIRO.

Dear Friends,
Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
Looking forward for your kind cooperation in this matter
Thanks & Regards,
Naveen Kumar.

Hello Naveen,
I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
- 826357 Profit Center Accounting and new general ledger in
I hope this helps. If not, please provide an example of your requirement.
Thanks and regards,
Suresh Jayanthi.

Restrict system from doing re-confirmation of all line items in SO

Hello SDNs,
When we change the quantity of one line item, system is going for re-confirmation of all line items.
when there are multiple line items, it is having perfomance problem. Now we want to change this to go for re-confirmation of only the changed line item. Please suggest me how to move ahead.
Regards
Hari

Hi,
what you are willing to implement is not a supported functionality in the current Yard management.
If this is not yet the case, I would encourage you to open a SAP Customer message so that your question gets checked and analysed at development support.
BR
Alain

Open status of Credit Memo after rejecting all line items

Dear Gurus
I am facing a problem. In my company we are using 2 credit memo types. One is CR and other ZCR (Copy of CR). I have tried both but both have same problem. I have also tried creating credit memos with reference to billing document, sales document and without reference also but the issue is same.
Problem is this we create credit memo with VA01 and post it with VF01. After posting if we cancel its posting with VF11 and reject the line items in VA02 the status of credit memo remain open. Cancellation documents are ok and completed but only credit memo in VA02 remain open even after rejecting all line items.
I have checked incomplete log of sales document type (CR and ZCR) in VOV8 and item types (G2N) in VOV7. All fields which are defined in incompletion log are there in document header and item.
Following is the copy paste data of Header Status tab
Overall status       Open
Rejection status     Everything rejected
Credit status        Not performed
Bill.stat.order-rel. Not invoiced
Overall blkd status Not blocked
Header data     Complete                   Item data       All items complete
Header dlv.data Complete                 Item deliv.data All items complete
Header bill.dat Complete                   Item bill.data All items complete
please help.

dear sir
if you mean to say to check Reason for rejection's settings in OVAG i have checked it and all rejection reasons are being in use in all other sales documents too. They are working fine in all other sales document. Issue is only in these two credit memos types.
Assigned by the System (Internal)
Delivery date too late
Poor quality
Too expensive
Competitor better
Guarantee
Unreasonable request
Cust.to receive replacement
Transaction is being checked
These are reasons and Stat column is empty for all. Other 3 columns have no tick in any reason.

Provision that MRP is not be considered for specific line item of Sales Ord

Is their any provision that MRP is not be considered for specific line item of Sales Order in MRP run? (Ex: Planned order is also generated for free/ADC sample quantity entered in Sales order)

Dear
Go to Sales and distribution--> Sales --> Sales Documents -->Schedule Lines --> Assign schedule line categories.
Choose the item category (eg. TAN) which is coming in the sales order and enter CN - No. Mat. Planning in the the manual schedule line category (MSL Ca) for MRP type PD.
This will enable you to choose while creating sales order in the Tab procurement column SL Ca.
Choose CN - No mat.planning for the schedule items which you don;t want MRP.
Regards
Soundar

ME21N - new field added and same value posted to it for all line items

hi all
i have added new field under item level in me21n screen.
data for new filed fetched from tables with values entered in header level material number.
For one record, it is ok
but for multiple records, same value is fetched for all line items
i have written coding in screen exit for 0111
and function exits EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
how to solve
pl help
regards
senthil

MODULE STATUS_0111 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
if sy-tcode eq 'ME23N' or sy-tcode eq 'ME23'.
    LOOP at SCREEN.
      if screen-group1 ne 'PCS'.
        screen-input = 0.
        MODIFY SCREEN.
      endif.
    ENDLOOP.
ENDIF.
TYPES : BEGIN OF ty_cabn1,
         atnam TYPE cabn-atnam,
       end of ty_cabn1.
DATA : itab_cabn1 TYPE STANDARD TABLE OF ty_cabn1 INITIAL SIZE 0,
         wa_cabn1 TYPE ty_cabn1.
TYPES : BEGIN OF ty_cawn1,
    atinn TYPE cawn-atinn,
    atzhl TYPE cawn-atzhl,
    atwrt TYPE cawn-atwrt,
    end of ty_cawn1.
DATA : itab_cawn1 TYPE STANDARD TABLE OF ty_cawn1 INITIAL SIZE 0,
         wa_cawn1 TYPE ty_cawn1.
TYPES : BEGIN OF ty_cawnt1,
   pcs TYPE cawnt-atwtb,
    atinn TYPE cawnt-atinn,
    atzhl TYPE cawnt-atzhl,
    atwtb TYPE cawnt-atwtb,
      end of ty_cawnt1.
DATA : itab_cawnt1 TYPE TABLE OF ty_cawnt1,
         wa_cawnt1 TYPE ty_cawnt1.
TYPES : BEGIN OF ty_pcs1,
pcs TYPE cawnt-atwtb,
atwrt TYPE cawn-atwrt,
atwtb TYPE cawnt-atwtb,
    end of ty_pcs1.
DATA : itab_pcs3 TYPE TABLE OF ty_pcs1,
         itab_pcs4 TYPE TABLE OF ty_pcs1,
         wa_pcs1 TYPE ty_pcs1.
TYPES : BEGIN OF ty_pcsn,
matnr TYPE ausp-objek,
ebelp TYPE dynpread-stepl,
atwrt TYPE cawn-atwrt,
atwtb TYPE cawnt-atwtb,
END OF ty_pcsn.
DATA : itab_pcsn TYPE TABLE OF ty_pcsn,
         wa_pcsn TYPE ty_pcsn.
TYPES : BEGIN OF ty_ausp1,
     objek TYPE ausp-objek,
     atinn TYPE ausp-atinn,
     atwrt TYPE ausp-atwrt,
   END OF ty_ausp1.
DATA : itab_ausp1 TYPE STANDARD TABLE OF ty_ausp1 INITIAL SIZE 0,
         wa_ausp1   TYPE ty_ausp1.
DATA : param_name1(35) TYPE c.
DATA: progname1      TYPE sy-repid,
        dynnum1        TYPE sy-dynnr,
        dynpro_values1 TYPE TABLE OF dynpread,
        dynpro_values2 TYPE TABLE OF dynpread,
        field_value1   LIKE LINE OF dynpro_values1,
        ematn1         TYPE mara-matnr.
if sy-tcode ne 'ME23N' and sy-tcode ne 'ME23'. "psk
    clear : itab_cabn1,itab_cawn1,itab_cawnt1,itab_pcs3,itab_pcs4,itab_pcsn,itab_ausp1.
    clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
    if sy-uname eq 'IBM_ABAP'.
      param_name1 = '000000001'.
    else.
      param_name1 = '000000013'.
    endif.
    SELECT atnam
    FROM cabn
    INTO CORRESPONDING FIELDS OF TABLE itab_cabn1
    WHERE atinn = param_name1.
    select *
    FROM cawn
    into CORRESPONDING FIELDS OF TABLE itab_cawn1
    WHERE atinn = param_name1.
    if itab_cawn1[] is NOT INITIAL.
      SELECT atinn atzhl atwtb
      FROM cawnt
      INTo CORRESPONDING FIELDS OF TABLE itab_cawnt1
      FOR ALL ENTRIES IN itab_cawn1
      WHERE atinn = itab_cawn1-atinn
      AND atzhl = itab_cawn1-atzhl.
    endif.
    if itab_cawnt1[] is NOT INITIAL.
      sort itab_cawnt1 by atinn atzhl.
      loop at itab_cawnt1 INTO wa_cawnt1.
        READ TABLE itab_cawn1 INTO wa_cawn1 with key atinn = wa_cawnt1-atinn
                                                     atzhl = wa_cawnt1-atzhl BINARY SEARCH.
        if sy-subrc eq 0.
       CONCATENATE wa_cawn-atwrt '->' wa_cawnt-atwtb INTO wa_cawnt-pcs.
       MODIFY itab_cawnt FROM wa_cawnt TRANSPORTING pcs.
       wa_pcs-pcs = wa_cawnt-pcs.
          wa_pcs1-atwrt = wa_cawn1-atwrt.
          wa_pcs1-atwtb = wa_cawnt1-atwtb.
          append wa_pcs1 to itab_pcs3.
        ENDIF.
        CLEAR : wa_cawnt1,wa_cawn1, wa_pcs1.
      ENDLOOP.
    ENDIF.
    CLEAR: dynpro_values1, field_value1.
dynpro_values-FIELDNAME = 'MEPO1211-EMATN'.
APPEND dynpro_values.
    field_value1-fieldname = 'MEPO1211-ematn'.
    APPEND field_value1 TO dynpro_values1.
    progname1 = 'SAPLMEGUI'.
    dynnum1 = '1211'.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME                               = progname1
        DYNUMB                               = dynnum1
TRANSLATE_TO_UPPER                   = ' '
     REQUEST                                = 'A'
PERFORM_CONVERSION_EXITS             = ' '
PERFORM_INPUT_CONVERSION             = ' '
DETERMINE_LOOP_INDEX                 = ' '
START_SEARCH_IN_CURRENT_SCREEN       = ' '
START_SEARCH_IN_MAIN_SCREEN          = ' '
START_SEARCH_IN_STACKED_SCREEN       = ' '
START_SEARCH_ON_SCR_STACKPOS         = ' '
SEARCH_OWN_SUBSCREENS_FIRST          = ' '
SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
      TABLES
        DYNPFIELDS                           = dynpro_values1
   EXCEPTIONS
     INVALID_ABAPWORKAREA                 = 1
     INVALID_DYNPROFIELD                  = 2
     INVALID_DYNPRONAME                   = 3
     INVALID_DYNPRONUMMER                 = 4
     INVALID_REQUEST                      = 5
     NO_FIELDDESCRIPTION                  = 6
     INVALID_PARAMETER                    = 7
     UNDEFIND_ERROR                       = 8
     DOUBLE_CONVERSION                    = 9
     STEPL_NOT_FOUND                      = 10
     OTHERS                               = 11
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
READ TABLE dynpro_values1 INTO field_value1 with KEY fieldname = 'MEPO1211-EMATN'.
    LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
      clear ematn1.
      if sy-subrc eq 0.
        ematn1 = field_value1-fieldvalue.
      endif.
      if ematn1 is not INITIAL.
        clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = ematn1
          IMPORTING
            OUTPUT = ematn1.
        select *
        FROM ausp
        INTO CORRESPONDING FIELDS OF TABLE itab_ausp1
        WHERE objek = ematn1
        and atinn = param_name1.
        CLEAR itab_pcs4.
        if itab_ausp1[] is not INITIAL.
          sort itab_ausp1 by atinn atwrt.
          sort itab_cawn1 by atinn.
          READ TABLE itab_ausp1 INTO wa_ausp1 INDEX 1.
          loop at itab_cawn1 INTO wa_cawn1 WHERE atinn = wa_ausp1-atinn AND atwrt = wa_ausp1-atwrt.
            READ TABLE itab_cawnt1 INTO wa_cawnt1 WITH KEY atinn = wa_cawn1-atinn
                                                            atzhl = wa_cawn1-atzhl.
            if sy-subrc eq 0.
              wa_pcs1-atwrt = wa_cawn1-atwrt.
              wa_pcs1-atwtb = wa_cawnt1-atwtb.
              append wa_pcs1 to itab_pcs4.
              wa_pcsn-matnr = wa_ausp1-objek.
              wa_pcsn-ebelp = field_value1-stepl.
              wa_pcsn-atwrt = wa_cawn1-atwrt.
              wa_pcsn-atwtb = wa_cawnt1-atwtb.
              APPEND wa_pcsn to itab_pcsn.
            ENDIF.
            clear : wa_ausp1,wa_cawn1,wa_cawnt1.
          ENDLOOP.
        ENDIF.
       clear wa_pcs1.
       read TABLE itab_pcs4 into wa_pcs1 index 1.
       if sy-subrc eq 0.
         EKPO_CI-ZPCS = wa_pcs1-atwrt.
       endif.
      ENDIF.
    ENDLOOP.
    CLEAR: field_value1.
    LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
      clear wa_pcsn.
      if field_value1-fieldvalue is not INITIAL.
        read TABLE itab_pcsn INTO wa_pcsn with key matnr = field_value1-fieldvalue
                                                    ebelp = field_value1-stepl.
        if sy-subrc eq 0.
          clear EKPO_CI-ZPCS.
*EKPO_CI-ZPCS = wa_pcs1-atwrt.
          EKPO_CI-ZPCS = wa_pcsn-atwrt.
        endif.
      endif.
    ENDLOOP.
   CLEAR: field_value1, dynpro_values1.
   progname1 = 'SAPLXM06'.
   dynnum1   = '0111'.
   field_value1-fieldname = 'EKPO_CI-ZPCS'.
   APPEND field_value1 TO dynpro_values1.
   if ematn1 is not INITIAL.
     clear wa_pcs1.
     read TABLE itab_pcs4 into wa_pcs1 index 1.
     if sy-subrc eq 0.
       EKPO_CI-ZPCS = wa_pcs1-atwrt.
     endif.
   ENDIF.
endif.
ENDMODULE.                 " STATUS_0111 OUTPUT
Function exits:
^^^^^^^^^^^^^^^^^
EXIT_SAPMM06E_016
^^^^^^^^^^^^^^^^^
INCLUDE ZXM06U41 .
DATA XFISTL LIKE EKPO-FISTL.
TABLES: ADRC, T001W.
DATA: PLANT LIKE T001W-WERKS.
SELECT SINGLE * FROM T001W WHERE WERKS = I_EKPO-WERKS.
SELECT SINGLE * FROM ADRC WHERE ADDRNUMBER = T001W-ADRNR.
XFISTL = ADRC-SORT2.
SET PARAMETER ID 'FIS' FIELD XFISTL.
* Added For PCS 12.11.2010
DATA : fs_ekpo type EKPO_CI.
if sy-tcode = 'ME22N' or sy-tcode = 'ME23N'.
*  if tekpo-zpcs is INITIAL.
*    message e000(zmm) with 'PCS Type should be chosen'.
*  endif.
  loop at tekpo.
    if ( tekpo-ebeln eq i_ekpo-ebeln and tekpo-ebelp eq i_ekpo-ebelp ).
      ekpo_ci-zpcs = tekpo-zpcs.
    endif.
  ENDLOOP.
endif.
^^^^^^^^^^^^^^^^^
EXIT_SAPMM06E_018
^^^^^^^^^^^^^^^^^
INCLUDE ZXM06U40 .
E_CI_EKPO-ZPCS = EKPO_CI-ZPCS.
E_CI_UPDATE = 'X'.

The vendor code is not coming against some Assignment line items with the

Hi All,
While executing t.code FBL3N,the vendor code is not coming against some Assignment line items with the GL A/C4607000, some line items it is coming.
The GL A/c 4607000 is GR/IR clearing a/c.
Please let us know why this situation is happeing at the time of FBL3N.
Thanks
Ram

HI,
By activating the special fields you can the vendor number, but use the new reprot called "FAGLL03 - Display/Change Items (New) ".
First go to SPRO> Financial Accounting (New)> General Ledger Accounting (New)--> Master Data > G/L Accounts>Line Items --> Define Special Fields for Line Item Display
Click on New Entries -
Table - BSEG - Field - LIFNR
Save. Now execute the report - FAGLL03 - Display/Change Items (New)
Give the gl account number and execute.
After getting the line items list from menu select --Settings --> Special Fields --> Click on New Entries --> Enter Table BSEG, Field Name LIFNR.
After this come back and execute again. It will give you the vendor number.
Thanks & Regards,
Shashi Kanth.

Material Quantity difference document line item for HU

Dear Experts,
When I try to clear differences in LI21, i get the error message as above.
Error Message : 'Material Quantity difference document line item for HU'
Any idea why this error occurs?
Regards,
Shetty

Hello Shetty,
It may be due to some stock inconsistency. You may try iin case of a non HU managed storage location HU to run LX23 and it can fix discrepancy overwrting MM-IM with LE-WM data. But if it is a HU managed then you can run HUDIFF transaction but only to see if there is stock differences not to fix anything, usually SAP Support (Development Support) does that job.
Have a nice day !!

Changing line item delivery address in shopping cart need to reflect same in all line items

Hi All,
Need help on below,
I have a requirement that when we change the shopping cart line item delivery address same needs to reflect all line items.
Suppose a shopping cart having 3 line items 1, 2 and 3. if i change the delivery address of line item 1, the same needs to reflect the line item 2 and 3 as well.
In my case if we change the 1's delivery address, after processing its genrating the IDOC on line item wise not in the header wise. And same having the different delivery address.
Thanks in advance.
regards:
Ramesh

Hello Ramesh,
we can do this changes in BBP_DOC_CHANGE_BADI . Create a Implementation for the above BADI and Inside that Implementation BADI method just call the function module BBP_PD_SC_GETDETAIL for SC item details by passing the Header GUID.
Once you get the Partner table(E_PARTNER) details.. Keeping a loop on SC item(E_ITEM) and change address number(ADDR_NO) in Partner table when Partner function eq X( X is an partner function values which you define in SPRO.).
pseudo logic:
CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
    EXPORTING
      i_guid    = l_guid
    TABLES
      e_item    = lt_item
      e_partner = lt_partner.
* Check for all the line items if vendor is assigned
LOOP AT lt_item INTO lwa_item.
    READ TABLE lt_partner INTO lwa_partner
                      WITH KEY partner_fct = '00000019'
                               del_ind     = space
                               p_guid      = lwa_item-guid.
    IF sy-subrc eq 0 .
   * modification of address number logic here in partner table
    ENDIF.
ENDLOOP.
All the best.
Regards,
Sankarbabu

Required all line item on a single Invoice

Dear Guru's,
My user required all line item (e.g :10)on a single invoice,currently he is getting 4 line item on a single page,he is getting his invoice on 3 pages instead of 1 page.
Pls provide us the solution asap.
Thanks In advance.
VJ

Dear VJ
Sorry not clearly explained. Assuming that in a delivery you have 4 line items and you want one invoice for this. Presently, for u, line item wise one invoice is creating.
If my understanding is correct, go to VTFL, select the delivery type and billing type and choose the item category. There for the field Data VBRK/VBRP maintain routine 007. Of course, you can also maintain 003 or 006, but at a later date, if you want club multiple deliveries to one invoice, then these two routines will not work.
thanks
G. Lakshmipathi

RCV transaction processor not updating quantity delivered for requisitions

We are converting PO receiving transactions using PO details for each transaction. Each PO is having requisition(s) attached to it. Open interface program is not updating quantity delivered for requisitions attached to it but transactions get created successfully.
However, from iprocurement if we receive the items for requisitions it is updating the quantity delivered column.
Are we missing something??

Hi,
If you enter the receipt manually in Forms (not in iProcurement) referencing the Purchase Order, is it than behaving the same as the converted receipts?
Regards,
Marcel

BAPI_SALESORDER_CREATEFROMDAT2 ...not updating quantity of all line items

Similar Messages

Maybe you are looking for