BAPI to assign budget to a WBS element.

hi,
I need to find BAPI to assign budget to a WBS element in a project.
The transaction to do this is CJ30.
Its imp...
Please help..
Thanks & Regards
Shabari

Look at BAPI_RESERVATION_CREATE1
rgd
Frédéric
(next time search the BAPI with transaction BAPI or in ifr.sap.com)

Similar Messages

  • Step By step Procedure to control Pm orders Budget by using Wbs element

    HI,
    we need step by step procedure to control PM orders Budget By using WBS  Element, step by step means
    1. how to create wbs element
    2 how to assign budget to wbs element
    3 how to control this budget through orders
    Regards
    Ganesh

    Hi,
    Please verify this link:
    http://www.sap-img.com/ps006.htm
    Regards
    Keerthi

  • Assigning GL accounts to WBS elements

    Hi,
    Where can we assign GL accounts to WBS elements in Config or in the system ( TX )?
    issue is that when an expense is booked it is accepting any GL account while booking the expenses.
    Kindly help
    Thanks,
    Tanya

    Hi Tanya,
    I think, you want to ensure that you need to allow only specific GL codes to be posted to WBS. If yes, then this can be achieved by using validation functionaliy (t code OPSI). In validation you can specify a set of cost elements, which are allowed for postings to WBS.
    Normally all GL codes, which have been created as cost element in controlling can be posted to WBS.
    Award points, if useful.
    Regards
    Rakesh Pawaskar
    Message was edited by:
            Rakesh Pawaskar

  • How to find Annual Budget for a WBS element ?

    Hi All ,
    Is there any way by which i can find the annual budget for a WBS element ?
    I have been working on this for a long time , but couldnt get the answer .
    So getting back to this place .
    Thanks in advance .
    Regards,
    Ambar .

    Hi,
    This link may help you.
    how to get the budget amt and commited amt and available amt?
    Regards,
    Shamma

  • BAPI for Production order creation against wbs element

    dear all,
    I am using BAPI (BAPI_PRODORD_CREATE) for Production order creation against wbs element.I am putting following input paramters in this
    material no,
    order type
    plant
    qty
    basic start dt & end dt
    wbs
    But during GRN it is not taking the account assignment as project stock i.e. its picking movement type 101 but it should be 101Q.
    For this what changes are required.
    regards
    ravi arora

    Hi,
    2 options i can think of:
    1. Create a BDC program by recording co10
    2. Create a planned order with order type PR using BAPI_PLANNEDORDER_CREATE, specify the WBS element & other details. Now use BAPI_PRODORD_CREATE_FROM_PLORD to create a production order with reference to the planned order created earlier.
    I believe option 2 should meet your need. Check & revert.
    Regards,
    Vivek

  • Function modules or BAPI for posting plan costs for WBS Element

    Hi all,
    Does anyone know, whether there exists a function module or BAPI for posting plan costs to a WBS Element? K_COSTS_PLAN_PS does not work, because RKP1 is not allowed.
    Greetings

    check
    BAPI_COSTACTPLN_POSTACTINPUT   Activity Input Planning: Posting                
    BAPI_COSTACTPLN_POSTACTOUTPUT  Activity/Price Planning: Posting                
    BAPI_COSTACTPLN_POSTKEYFIGURE  Stat. Key Figure Planning: Postings             
    BAPI_COSTACTPLN_POSTPRIMCOST   Primary Cost Planning: Postings                 
    BAPI_PDTRANSCO_POSTPRIMCOST    Transfer of Planning Data: Post Primary Costs   
    K40C                           CO Actual Postings, Manual                      
    BAPI_ACC_PRIMARY_COSTS_POST    Accounting: Post Primary Costs                  
    BAPI_COPAACTUALS_POSTCOSTDATA  BAPI Operating Concern: Post Costing-Based Actua
    BAPI_PRIM_COST_CHECK_AND_POST  Primary Costs: Formal Parameter Check           
    S@meer

  • Assign Multiple equipments to WBS element

    Hi all,
    Can anybody tell me how to assign mutilple equipment to single WBS elements. As far as i know we can assign only one equipment to WBS element.
    My requirements is to assign more than one equipment to particular WBS elements. How should i do?
    Please help me
    Thanks

    Hi to the best of my knowledge you can not assign more than one equipment to a WBS in standard SAP
    It would all depend on how you structure your project in the past I have seen
    Project with first level WBS and then folliowing on from there you can have multiple WBS elements below this one for each equipment. This would then allow for reporting etc at both levels of the WBS.
    If you can supply a little more information I will try and help further.
    Jim

  • Assign activity type  to WBS element  without network

    Hi There,
    I have a customer business scenario where I have to assign activites to WBS element  without network.
    can any one help me on that..
    Thanks,
    Paritosh

    Hi Thomas,
    Thanks for your information. I have created customer Project with one network and multiple WBS.
    But another issue related to project RBB & DIP profile. I have a scenario it like quantity should be updated from DIP profile in quotation and billing price should take from sales condition record.
    After booking activity base cost directly from KB21N and it is showing in line item. Still when I am trying to run transaction with DP82 to update sales base price system is giving me a message "No expenditure item found" although in WBS level showing all the cost/quantity.
    Can any one tell why I am getting message and how to correct it?
    Paritosh

  • Extension structure for a bapi to create project definition and wbs element

    Hi,
    is there a bapi that have an extension structure for custom fields, that can be used to create a project with wbs elements.
    thanks for your help.

    i yhink BAPI_PROJECT_MAINTAIN  dont have extension structure, so i cant use it because i have custom fields.
    BAPI_BUS2054_CREATE_MULTI seems meet my requirement because it has extension structure,

  • Bapi  to simulate transaction mb1b with WBS ELEMENT

    Hello people, I need a Bapi which  simulates transaction 'MB1B' with Reservation and using a wbs element.
    Any idea?¿
    Thks.

    Look at BAPI_RESERVATION_CREATE1
    rgd
    Frédéric
    (next time search the BAPI with transaction BAPI or in ifr.sap.com)

  • Re: Budget table for wbs element

    Is there any table that stores  WBS elements budgets?

    Thank You very much for you quick replies....I am awarding the  points.....I have nt checked the tables yet....looks like i got the correct table names........
    One more question Can you guys tell me the table names for the Status of the WBS element....like where i can see whether a WBS element is locked or released...some thing like that.
    Thanks a lot

  • Assignment of WC in WBS element

    Hi all,
    Can we assign workcenter on WBS element

    Hello,
              1st we should be clear that what is the functionality of work center?
    Work Center is an Organisational unit that specifies where and by whom an operation is to be executed
    In SAP PS work centers used for workforce / resource / capacity planning /scheduling a work . That all is possible in activities and process.
    So we  need activity to assing work center not the WBS.
    Thanks

  • How to check distributed budget based on WBS Element in program

    Hi All,
    I need to check distributable budget value which can be viewed in IM53 transaction in my custom program
    Is there any FM or BAPI or calculation logic for this.
    Thanks.

    Hi,
    This link may help you.
    how to get the budget amt and commited amt and available amt?
    Regards,
    Shamma

  • Maintaining Budgets for WBS element.

    Hi all,
    My operating concern currency is USD while my company code currency is CAD.
    When I am assigning budgets t my WBS element using tcode CJ30, it displaying the currency as USD. However, I want it to be displayed as CAD.
    What needs to be done for this?

    Hi,
    You can enter the budget either in controlling area currency, object currency or transaction currency. You can define your WBS to be managed in CAD, and set the profile to object currency (OPS9), for example.
    Regards,
    Eli

  • Creation of Documents and assigning it to WBS Elements

    Hi all,
    I have a question regarding creation of documents.
    I am using T-code CV01N.....
    How to create the document and how to assign it to a WBS Element?
    Do we have any BAPIs or FM available for this?
    Thanks in advance....

    Hi Raj,
    Documents can be created/checkin  from WBS/activity without going to CV01N. For this, you need to have the DMS configured.
    Another way, Create document using transaction CV01N and attach manually in WBS/activity from Project Builder.
    Srinivasan Desingh

Maybe you are looking for

  • How to upgrade OIM 9.1.0.0 to OIM 9.1.0.2

    Hello Gurus, I am looking for steps to setup an OIM 9.1.0.2 env on my VM for a customer implementation. I have the OIM Training VM that has OIM 9.1.0.0. Could you please let me know what patches to download and the upgrade procedure? Thanks

  • Payments - Payments_Invoices - DiscountPercent property

    Hello experts, I'm using DI API to transport invoices, payments, credit notes, etc. from my DB to SB1. In the payments I need to do a discount to the invoice been paid, but I need to subtract the net amount not a percentage. I only see this property

  • Org.data determination is possible for product scenario

    org.data determination is possible for based on product scenario in transaction like for BP ? how can we do this? Pls guide me?  Thanking u in advance.

  • Microsoft.SystemCenter.Datawarehouse.OLAP.Base MP in MPSyncJob stuck in Pending Association

    The MP above is stuck.  All other job details show as Associated.  BatchID for MPSynch increases and the BatchID for the stuck job also increases.  All MP's have Deployment Status as "Compeleted".  Reporting functions work and cubes exist.  DW event

  • Update for microsoft 2008

    I have got microsoft office installed and recently received an up date for it. When I ran the update tho it just froze with a black and white cursor and told me I had to shut programme before it could continue but the programme was shut. Not being us