BAPI to change maintenance plan(IP02)

Is there any BAPI available to change maintenance plan(IP02).

I doubt if you have any bapi's for your purpose.

Similar Messages

BAPI for "Change Base Planning Object"

Hi
Is there any BAPI for "Change Base Planning Object" ( TC KKE2).
I need to change the Price of a Resource in the Cost Items for a Base Planning Object.
So if any one know the BAPI for this topic please let me know, and if possible send me your code also it will be really help full.
Regards

I didn't find a BAPI to do this. I had to do it by a Batch Input.

Change or Add Cycles in a Maintenance Plan (IP02)

good afternoon all,
we have an issue with a number of maintenance plans that were setup as 1 year cycles, and now we want to run them as monthly. Is there a way to either change the yearly cycle to monthly, or add a new monthly cycle?
SAP ECC6
Release 731 sp level 0007.
Thanks.

Greetings Santosh,
You are correct, the key word here is "approximately", as the Cycle Modification Factor has only two decimals of precision, you will need to input 0,08 to reflect the appropriate factor of 1/12=0,08(3) - so that will mean your cycle is 360*0,08=28,8 and not 30 days, which is why I did not propose this route. But if it's not an issue, then yes, that's another way to do this
EDIT: Which reminds me, after switching the cycle to monthly, consider if you require Time or Key Date scheduling on the Maintenance Plan scheduling parameters, as for SAP 1 Month = 30 Days with the former, but with the latter the scheduling is always for the same day of each month.

BAPI To inactive maintenance plan

Hi, i need a bapi to inactive a maintenance plan
regards
Dayana

Hi,
You can do it by using transaction code IP02,why you want BAPI to inactive the maintenance plan.
Open the maintenance plan in IP02 & go to tab maintenance plan Functions - Inactive.
Hope it will help you.
Regards,
Manish Agarwal
Dont forget to give point if useful ans.

BAPI to change maintenance plant on Equipment

Hi everyone,
Is there a BAPI which changes the maintenance plant on the equipment. I tried both
BAPI_EQMT_MODIFY and
BAPI_EQUI_CHANGE unsuccessfully.
If any of you have an idea of any BAPI which does the same or if the plant can be changed with the above BAPI's please help.
Thanks
Aneesh

Hi Aneesh,
When using BAPI_EQMT_MODIFY are you populating with BAPI_ILOA-MAINTPLANT = "Your value" as well as BAPI_ILOA_X-MAINTPLANT = 'X'
Don't forget to call BAPI_TRANSACTION_COMMIT if you have no errors in your return table as well.
Kind Regards,
Richard.
Edited by: Richvdl on Nov 30, 2010 6:08 PM

FM or BAPI to change Maintenance plant and Planning Plant for an equipment

Hi Experts,
I need to change the Maintenance plant and Planning Plant for an equipment. Is there FM or BAPI available for the same?
Thanks,
Peri.

what doesn't it do the same ? it contains planning plant and maintenance plant which you can update ??
if you expect that SAP delivers custom functions for every possible question a developer has you can better search for an other job. SAP makes generic functions and you can use them for you're own sollutions.
it is also expected that you try to work things out for you're own sollution.
you can find sample code quickly enough if you search where the function is used
like RISTEQ01
kind regards
arthur

Table name with feild Duration of Task/Frequency , Change in Duration/Frequency for maintenance plan

hi experts,
i need a table for maintenance plan which has field
1) Duration of Task/Frequency
2) Change in Duration/Frequency
below i have elaborated my requirements.
among those fields i have got the table name mpos,mpla,plpo except the above listed two feilds.
i have to create a report with these requirements.
anyone tell me in which table can i get that 6 and 7th fields.
Requirement1:
Maintenance Plan Number
Operation Code
Standard Teode(assigned to Plan)
Standard Text Key description
Cost Center
Duration of Task/Frequency
Change in Duration/Frequency
Created Date
Created By
Changed On
Changed By
Requirement 2: layout of the report should be modifiable with the existing fields.
Requirement 3: A transaction will be created to access the report.
Requirement 4: In the report, Maintenance Plan number will be hyperlinked which will divert to AMP screen (display view of maintenance Plan) once clicked on it.
Requirement 4: Report should contain all created and changed Maintenance Plan details.
Requirement 5: Initial selection parameter for the report will be only Date. Based on the entered date, records created or changed during the duration should be picked up in the report.
Requirement 6: Change in frequency will only be picked for single cycle plan. Strategic Plan will not be considered in case frequency change made in it.
Requirement 7: Change By and Created By should be the complete name instead of User ID.
regards,
priya

can anyone answer for my above question?
regards,
priya

Mass Maintenance of Maintenance Plans

http://help.sap.com/erp2005_ehp_03/helpdata/EN/a1/5959394ba2cd4ae10000000a114084/frameset.htm
Procedure
If you want to change maintenance plans with the mass maintenance function, proceed as follows:
1. Choose Logistics ®
2. Plant Maintenance ® Planned Maintenance ® Maintenance Planning ® Maintenance Plans ® Mass Maintenance for Maint. Plans ® Mass Maintenance for Maint. Plans or use the transaction code mch01 and choose Enter. The Mass Changes for Maintenance Plans screen appears.
3. Enter an appropriate variant name or your selection data in the areas of the screen called Maintenance plan selection, Maintenance item selection, Hierarchy or Work scheduling/task list data.
Note
If you want to make similar changes to data often, you can create a variant to ease data entry.
4. Choose Execute.
The Mass Maintenance: Table View screen appears.
(The Mass Maintenance: Field View dialog box appears if you choose Execute field view from the Mass Changes for Maintenance Plans screen).
5. Choose the appropriate tab page according to whether you want to make changes to the maintenance plans, maintenance cycles or the maintenance items.
6. Select the objects that you want to change.
You can select the fields that you want to change using the Select fields function.
7. You can check your changes by using the Test changes function.
8. Your changes are saved to the database when you choose Save.
9. The system displays all the changes you have made and any errors that may have occurred in a log. You can save this log if you wish.
Result
Your changes have an immediate effect on all the selected objects.
I have a need to enable this program which was delivered in one of the enhancement packs. We have thousands of maintenance plans that need to be modified.
A couple of questions:
1) how do I activate as little as possible to allow me to use this program
2) With this enhancement activated, am I going to be putting myself on a new support pack line.

hi,
I just know go to transaction SFW5 to check whether all components required for the operation of system are activated (switched on). But I do not know exactly which component is affected for this function.
Hope it helps.

Start cycle date in maintenance plan

Hello Every one,
In my project i have uploaded all the plans in production server with start cycle date. Now when i am going in change mode i cant see the start cycle date even thoug i can see the scheduling overview in plan as correct date but i m not able to see the start cycle date. Kindly help me in this.
Regards
Abhishek Sinha

Hi,
In Maintenance Plan, once you have mentioned the start of the cycle. Again it wont appear in Change Maintenance Plan, you will have to restart or reschedule the Plan.
Regards,

BAPI for changing Appropriation request

Hi,
I want the BAPI to change the plan values in Appropriation request.Help me regarding this.
Regards,
Charumathi.B

Hi,
Try this BAPI BAPI_APPREQUEST_CHANGE_MPO.

BAPI for Maintenance Plan Scheduling with EHP5

Hello.
In documentation for LOG_EAM_CI_4 mentioned that: [API functions have been developed for the scheduling of maintenance plans. These APIs provide the same functions as transaction IP10: the creation of maintenance calls or the changing of existing maintenance calls|http://help.sap.com/erp2005_ehp_05/helpdata/EN/33/46AC67364447A3BA2F4EFA65B8C014/frameset.htm].
We have activated EHP5 and all LOG_EAM_CI* business functions in our system, but still can't find this "magic" BAPI.
Does anybody know its name?
BR,
Pavel
Edited by: Pavel Nedvijaev on Nov 7, 2011 5:37 PM

Maheswaran.K thanks for your reply, but as i wrote above we have activated all LOG_EAM_CI* including LOG_EAM_CI_3.
Version of software components SAP_APPL, EA-APPL is 605 as it needed.

Work Order - Maintenance Planning plant change

Hi Gurus,
Is there any way to change the maintenance planning plant in a created work order? We are having an issue on work orders and we need to tranfer our open work orders to another plants to solved the issue. Please me let me know if this is possible to do in SAP. And let me know how to do it in SAP.
Thanks in advance,

Hi,
The start of the plan is not option as this will surely have an impact. Anyway, work around for this issue was provided and this is OK now. We will continue with the old orders untill such time they will finally be closed. No postings will be created against this old orders and if there's a need to do GR new orders will be created in new plants for the postings.
Thanks for you help,

Function module / BAPI for changing planning date (FDTAG)

Hi everyone,
Let's go for a problem.
Many FI documents have been created in our system, with a wrong planning date, these documents have to be changed and I have been trying to develop a report.
I am having a big trouble finding a function module or a BAPI which allows me to change the planning date (FDTAG field). I have been trying these function modules:
FI_ITEMS_CHANGE
FI_DOCUMENT_CHANGE
The first one works for changind data in the FI documents but it seems like it can't change the planning date, it returns an error message that informs that the FDTAG field can not be changed.
The second one is confusing, I have been unable to feed the function module with the data it needs to determine a single document.
I am trying to use BAPI_ACC_DOCUMENT_POST right now, it doesn't seems promising but you never know.
Has anyone had the same problem? I have been looking for an answer in both google and here but I can't find one, just some people with the same problem.
I will keep trying to find the solution, if I find it I will post it here.
Thanks in advance,

Hi again Max,
This worked perfectly, even better because we where already using the FDTAG field for mass changes (don't remember right now which note we implemented) so I have just used FI_ITEMS_MASS_CHANGE with no changes at all.
Thank you very much for the help.

Function (or BAPI, ...) to skip calls and release calls in maintenance plan

Hi, gurus!
We need to find a function (or BAPI, ...) in order to skip a call number in a maintenance plan.
We need a function (or BAPI, ...) to release a call in a maintenance plan, too.
We could use a call-transaction to IP10, but we guess there could be problems with scroll and with pop-up warning messages.
We also thought about using IP30 but there's a problem: if there are previous calls that are not skipped, transaction IP30 releases all those previous calls and we need to skipped them.
Thanks in advance. We really appreciate your help.
Best regards,
J Madariaga

You cannot skip a call in the middle of a list of active calls - this is standard functionality.
Can you please give more info as to why you would want to do this?
PeteA

Changing a cycle in an active maintenance plan

Hello All,
I received a request from an end user to make a change to an active maintenance plan. The plan has a 3mo cycle. The users would like to first, generate a call for March 2011 and second, to change this to a an annual cycle. I am able to use the 'Restart in Cycle' to generate a call in March, unfortunately, I am not able to figure out how to change the cycle from 3mo to 12mo. Is it possible for to change the plan cycle from 3mo to 12mo once the plan is started? The header section in IP10 is grayed out.
At the moment, it looks as though I need to create a new maintenance plan to accommodate the request.
Thanks in advance.
Anna

Mahee,
Appreciate your quick response. This was a strategy plan and I was able to make the changes as you had suggested, through the task list.
Thank you so much for your help!
-Anna
Edited by: Anna Vuong on Feb 24, 2011 10:08 PM

BAPI to change maintenance plan(IP02)

Similar Messages

Maybe you are looking for