BAPI to export features of Exceptions and Jump query from BW system to othe

Is there any BAPI is available to export features of Exceptions and Jump query from BW system to other SAP or Non SAP system, whereas won't  need to re-define Exceptions and Jump Query. I mean directly export features of Exceptions and Jump query from BW system to other system.
Thanks,
Rohan

Thanks for quick response.
I am working on Hyperion, they are using essbase, and Integration connector to connet BW directly and takes data from BW System.They have features to define Exceptions(Traffic Light) and Jump query in the Hyperion side. But now they want to import directly features of Exceptions(Traffic light) and Jump query from BW System(using BAPI) instead of defining Exceptions and Jump Query in the Hyperion side.
Please help me on this.
Thanks,
Rohan

Similar Messages

  • Upload and Download Query From one System to another  ?

    Hi Everybody ,
    I am working in an Upgradation Project ( From 4.6C  to ECC 6 ).
    It seems Queries cannot be coppied from 4.6 C  to  ECC 6 .
    Can anybody tell me how to Download the Queries from 4.6C  and  Upload to ECC 6  with detail steps.
    Thanks in Advance .
    Regards.
    Srikanta

    Hi,
    1.     Executed the program RSAQR3TR with ' Export ' option  for user group,Queries & info sets .It will store all the entries as Data cluster into one TR ( source system ).
    2. Now move this TR to new System
    3. And again execute the program RSAQR3TR with Import option by providing the TR (source System ).
    now it will store all the objects into new TR . ( target system ).
    you need to re-run the program with option ' Copy Standard Area -> Global Area' after import.
    Please check the results with 'test ' option before moving the queries.
    Even , you can try with Download/Upload options with RSAQR3TR.
    Hope this will help you.
    Regards.
    Ravi Sankar.Z
    Edited by: Ravi Sankara. Z on Mar 25, 2009 12:39 PM

  • Problem of running the jump query from the result line

    Dear expert,
    I have a problem when running a jump query from the result line. Apparently, the values of the caracteristics haven't been sent to the jump target.  However, the configuration in RSBBS seems to be good as the jump works well from the other lines.
    Does anyone have some ideas on that?
    Thanks in advance!

    Hi,
    If you are supposed to bring across characteristic values to your target, then you will not be able to jump from the result line. The configuration expects that the values of the characteristic marked as being used in the jump are filled with unique values. When you use the result line as a source for your jump, the values in the result line will most likely be based on the sum of multiple characteristic values.
    Hth,
    -Jacob

  • Export or transport all the RFC destination from one system to another syst

    Hi
    Is there any method to Export or transport all the RFC destination from one system to another system

    Hi,
    the information is stored in table rfcdes.But there are also some other RFC*-tables which have some relations. Nevertheless the RFC-connectons will possibly not work anymore  in the new system(depending on the release your systems are), as the passwords are stored in the Sec store with system-dependent keys.
    b.rgds, Bernhard

  • How is goods receipt and invoice sent from backend system to SRM system?

    Hi friends
    How is goods receipt and invoice sent from backend system to SRM system?
    Thanks
    regards
    Krishna

    Hi Khan
    BBP_GET_STATUS_2 and Clean_recrec_Up are background jobs to sync ecc and ebp.
    BBPIV and MBGMCR are used to send goods receipt and invoice from srm to backend system
    So we dont require any special idocs to send goods receipt and invoice from ecc to ebp.Are all handled by BBP_Get_status_2
    Regards
    Krishna

  • Exporting Java Add in and Importing to Standalone Java system

    Hi,
    I have a requirement to export Java system which is  ABAP+JAVA  and build a new standalone Java system through import.  Is it possible, if so please provide any documents or links.
    Thanks
    Shiv

    Hi Shiv,
    I've never heard that it's possible, but you could install a new Java system and import the self devloped components of your java software there (e.g. in SLD you can export a software component and then import it somewhere else). For database tables you might use an export- import function of your database, but I'm not sure about that.
    Regards
    Cornelia

  • Exporting and Importing mail from older system

    I just upgraded my Hard Drive and OS. Was using Tiger and now Leopard. I can still access my old hard drive. How do I export my mailbox files and import them into my new sys?
    thx

    first of all, you can use Migration Assistant (it's in /Applications/Utilities) to migrate your whole old setup, not just Mail. if you only want Mail, quit Mail and copy the entire directory homedirectory/Library/Mail and the file homedirectory/Library/Preferences/com.apple.mail.plist to the corresponding locations on the new computer. Delete homedirectory/Library/Mail if it already exists on the new computer before doing this. when you start Mail it will be exactly as it was on the old computer.

  • Authorization issue for Jump query from Summary to Detail

    Hello Gurus,
    I am facing an interesting issue in Jump query authorization.
    I have a query on a summary cube which has Company code as a authorization relevant object .From this query I launch a query on detail cube.This details cube has company code and customer as authorization relevant objects.Customer is present in free characteristic for this query.Summary cube doesnt have the customer object at all.
                     When the user drillsdown on the Customer level in the details query he get the authorization error.After this if he just refreshes the query it works fine .
                       Can anybody please suggest any innovative workaround for this issue.
    Gautam

    Hello Gurus,
    I am facing an interesting issue in Jump query authorization.
    I have a query on a summary cube which has Company code as a authorization relevant object .From this query I launch a query on detail cube.This details cube has company code and customer as authorization relevant objects.Customer is present in free characteristic for this query.Summary cube doesnt have the customer object at all.
                     When the user drillsdown on the Customer level in the details query he get the authorization error.After this if he just refreshes the query it works fine .
                       Can anybody please suggest any innovative workaround for this issue.
    Gautam

  • Copy and Migrate query from BI 3.x to 7.0

    Hello Experts,
    We are going through the upgrade right now.
    We have BI 3.x server and we are upgrading it to BI 7.0.
    Now we have nearly 3200 queries, we want to copy those queries from BI 3.x to BI 7.0, and then we want to save it in BI 7.0.
    So we will be able to keep the back up in BI 3.x.
    As i have told you, we have lots of queries, so practically it is not phisible to go to BI 7.0 browser, open each query and save as with some different name.
    Is there any other way for this?
    Thanks,
    Hetal

    You can open and edit queries from SAP BW 3.x with the BEx Query Designer from SAP NetWeaver 7.0, as required. However, as soon as you save a query, it is stored as an SAP NetWeaver 7.0 query. Queries from SAP BW 3.x and SAP NetWeaver 7.0 are stored in the same tables. Only the version information is adjusted as required.
    Once you process and save queries with the BEx Query Designer from SAP NetWeaver 7.0, you can no longer open them with the BEx Query Designer from SAP BW 3.x. The queries are still displayed in the open dialog for the BEx Query Designer from SAP BW 3.x, but cannot be selected.
    The reusable components of a query (structures, restricted and calculated key figures, variables) are also saved in the new version; this can result in dependencies to other queries. Likewise, these dependent queries can also only be opened with the BEx Query Designer from SAP NetWeaver 7.0. For information about eliminating these dependencies, see SAP Note 884629, which provides details about restoring temporarily stored queries
    I am not sure but I heard that basis persons Can do migrate all queries from BW3.5 version to BI 7.0 at a time.Consult those persons you may get some idea
    Refer the below link for more.
    http://help.sap.com/saphelp_nw70/helpdata/EN/44/05b8d847bc6037e10000000a1553f6/frameset.htm

  • I exported jpg, tif, psd, and dng files from Lightroom but Aperture does not see them except for dng during import

    How do I import jpg, tif, psd files exported from Lightroom 3 into Aperture 3.2?  I had no problems before...seems like since I installed Lion, they do not show up in the import folder.

    How are you trying to import them (again) ?  If you're importing through the Import Window and have RAW only set then that's all you'll get.
    Also what's an Import Folder? Not sure how Lightroom fits into this. If you share your workflow with us we might be able to help.
    regards

  • BAPI's for creating of Project and WBS elements in SAP system.

    Hi Guys,
                 I was able to use a Wrapper FM for creating the
    We have a FM which combines 5 different BAPIs
    FM/Wrapper: "Z_LEED_PROJ_WBSELEMT_CREATE"
    1)      BAPI_PS_INITIALIZATION
    2)      BAPI_BUS2001_CREATE
    3)      BAPI_BUS2054_CREATE_MULTI
    4)      BAPI_PS_PRECOMMIT
    5)      BAPI_TRANSACTION_COMMIT
    Requirement: To automate the process of creation of Project and WBSE(Tasks) and create an entries in the PS tables based on the user inputs from the user interface in Visual Composer.
    Basically user should be able to create the Projects and WBSE.
    Issue: We were able to create the Project with the FM (BAPI_BUS2001_CREATE) but having the issue with the creation of WBSE(Tasks), the user will be entering the inputs for Project Definition, Project Profile and WBSE which are to be created in the UI.
    The problem is we are not able to create the WBS elements using  BAPI     BAPI_BUS2054_CREATE_MULTI .i will send u the code below .Can anybody correct
       CLEAR it_return.
      CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
        EXPORTING
          I_PROJECT_DEFINITION = i_project_definition-project_definition
        TABLES
          IT_WBS_ELEMENT = it_wbs_element
          ET_RETURN = it_return.
      APPEND LINES OF it_return[] TO et_return[].
    Thanks,
    Gopi.

    Hi Ramiro,
                   This is the entire FM code which is below.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(I_PROJECT_DEFINITION) LIKE  BAPI_BUS2001_NEW STRUCTURE
    *"        BAPI_BUS2001_NEW
    *"  TABLES
    *"      IT_WBS_ELEMENT STRUCTURE  BAPI_BUS2054_NEW
    *"      ET_RETURN STRUCTURE  BAPIRET2 OPTIONAL
    *"      EXTENSIONIN STRUCTURE  BAPIPAREX OPTIONAL
    *"      EXTENSIONOUT STRUCTURE  BAPIPAREX OPTIONAL
      DATA: it_return LIKE STANDARD TABLE OF BAPIRET2 WITH HEADER LINE,
            v_error TYPE boolean VALUE IS INITIAL.
      CLEAR: et_return, it_return.
      CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
    Do checks for creating project definition
      CALL FUNCTION 'BAPI_BUS2001_CREATE'
        EXPORTING
          I_PROJECT_DEFINITION = i_project_definition
        TABLES
          ET_RETURN = it_return.
      APPEND LINES OF it_return[] TO et_return[].
      LOOP AT it_return.
        IF it_return-type CA 'EAX'.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          v_error = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
      IF v_error = 'X'.
        EXIT.
      ENDIF.
    Do checks for creating WBS elements
      CLEAR it_return.
      CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
        EXPORTING
          I_PROJECT_DEFINITION = i_project_definition-project_definition
        TABLES
          IT_WBS_ELEMENT = it_wbs_element
          ET_RETURN = it_return.
       APPEND LINES OF it_return[] TO et_return[].
      LOOP AT it_return.
        IF it_return-type CA 'EAX'.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          v_error = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
      IF v_error = 'X'.
        EXIT.
      ENDIF.
      CALL FUNCTION 'BAPI_PS_PRECOMMIT'
        TABLES
          ET_RETURN = it_return.
       APPEND LINES OF it_return[] TO et_return[].
      LOOP AT it_return.
        IF it_return-type CA 'EAX'.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          v_error = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
      IF v_error = 'X'.
        EXIT.
      ENDIF.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          WAIT = 'X'.
    ENDFUNCTION.
      can u please look at the code and let me know the changes?
    Thanks,
    Gopi.

  • Trying to install features for PowerPivot and Reporting Services from SQL Server 2012 with SP2, but no access to key?

    Hi,
    I had installed SQL Server 2012 PowerPivot on WFE and App Server. This is test farm with 1 WFE and 1 APP and 1 SQL Server.
    However, we had a heap of issues with Windows Claims Authentication and PowerPivot - issues were raised with "unable to make a connection to EntityDataSource" . Now we uninstalled the PowerPivot and Reporting Services features and wanted to install
    with the SQL Server 2012 with SP2. Originally SP2 was installed seperately and we had read there had been issues.
    Anyway on trying to install the features again using the SQL Server 2012 with SP2 iso I get 
    Could not open key UNKNOWN\Components
    I don't want to start deleting or changing permissions as quite dodgey. What is this key for anyway and how do I resolve my issue.
    Thanks.
    John.

    Hi John,
    Did you meet the error message during the process of configuring the PowerPivot for SharePoint?
    If yes, I suppose that the existing features or components have not been uninstalled completely.
    I recommend to delete the two keys left when uninstalling the PowerPivot and please make a copy of the registry keys before you delete the two keys:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\ServiceProxies\Microsoft.AnalysisServices.Sharepoint.Integration.MidTierServiceProxy
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\ServiceProxies\Microsoft.AnalysisServices.Sharepoint.Integration.MidTierServicea
    Please check the steps in the link below to see if there anything wrong when you uninstalling the PowerPivot and then re-install it to see how it works:
    https://technet.microsoft.com/en-us/library/ff487866(v=sql.110).aspx
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • How to Export data to memory and Import data from memory?

    hi
    I have the follwoing some code of program.
    The data is not filled from memory. I have to find what is the wrong in code.
    REPORT ZIFT_TEST1..
    SELECT-OPTIONS : so_budat FOR bkpf-budat,
                     sd_saknr FOR ska1-saknr.
      EXPORT so_budat TO MEMORY ID 'ZBUDAT'.
      EXPORT sd_saknr TO MEMORY ID 'ZSAKNR'.
      SUBMIT ZIFT_TEST2 AND RETURN.
    REPORT ZIFT_TEST2..
    SELECT-OPTIONS so_budat FOR bsis-budat NO DATABASE SELECTION.
    SELECT-OPTIONS: SD_SAKNR    FOR  SKA1-SAKNR MATCHCODE OBJECT SAKO.
      import so_budat = so_budat from memory id 'ZBUDAT'.
      import sd_saknr from memory id 'ZSAKNR'.
    Regards
    Iftikhar Ali
    Islamabad.

    Program1----
    REPORT demo_program_rep3 NO STANDARD PAGE HEADING.
    DATA: number TYPE i,
    itab TYPE TABLE OF i.
    SET PF-STATUS 'MYBACK'.
    DO 5 TIMES.
    number = sy-index.
    APPEND number TO itab.
    WRITE / number.
    ENDDO.
    TOP-OF-PAGE.
    WRITE 'Report 2'.
    ULINE.
    AT USER-COMMAND.
    CASE sy-ucomm.
    WHEN 'MBCK'.
    EXPORT itab TO MEMORY ID 'HK'.
    LEAVE.
    ENDCASE.
    Program2----
    REPORT demo_programm_leave NO STANDARD PAGE HEADING.
    DATA: itab TYPE TABLE OF i,
    num TYPE i.
    SUBMIT demo_program_rep3 AND RETURN.
    IMPORT itab FROM MEMORY ID 'HK'.
    LOOP AT itab INTO num.
    WRITE / num.
    ENDLOOP.
    TOP-OF-PAGE.
    WRITE 'Report 1'.
    ULINE.
    end of program 2----
    Now you copy this programs with same name as i mentioned and execute demo_programm_leave Program.you will understnad clearly.
    Notes::: A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
    An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
    Every program you start runs in an internal session.
    To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
    If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
    To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.

  • Exception and Error Handling from SRDemo giving duplicate errors.

    Hi ,
    I used code from SRDemo for Exception Handling and its giving me issue that all the error are get duplicate for every exception .
    I have debug it because of reportErrors(final PageLifecycleContext ctx) invoked twice with same Exception in it .
    Its get duplicated in UI .
    Thanks in advance.

    A small update. I tried again by upgrading the PCO version to 15.0 But still the same.
    I did the following 2 test cases:
    Unplug the UTP cable to the PLC and write data via PCO query
    Disable the agent instance and write data via PCO query
    In both cases the PCO Query returned the following output:
    Success: 1
    LastErrorMessage: <empty>
    The only information that I get is in the results but it is not a good practice to interpret this because I don't know all the possible messages.
    Result for Case 1:
    <?xml version="1.0" encoding="UTF-8"?><Rowsets CachedTime="" DateCreated="2015-03-26T14:13:18" EndDate="2015-03-26T14:13:12" StartDate="2015-03-26T13:13:12" Version="14.0 SP5 Patch 12 (1-okt-2014)">
        <Messages>
            <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/ProductDescription: Unspecified error</Message>
            <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/ProductDescription: Operation failed</Message>
        </Messages>
    </Rowsets>
    Result for Case 2:
    <?xml version="1.0" encoding="UTF-8"?><Rowsets CachedTime="" DateCreated="2015-03-26T12:11:37" EndDate="2015-03-26T12:11:35" StartDate="2015-03-26T11:11:35" Version="14.0 SP5 Patch 12 (1-okt-2014)">
        <Messages>
            <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/OrderQuantityTarget: java.net.ConnectException: Connection refused: connect</Message>
            <Message>PoederMagazijn/ATS PLC/M1 Order Dispatch/OrderQuantityConfirmed: java.net.ConnectException: Connection refused: connect</Message>
        </Messages>
    </Rowsets>
    Please advice. I cannot provide any transaction integrity at this time. I would assume this to be one of the base principles of PCO.

  • Loading transaction data to CRM and SAP/R3 from legacy system

    Where can I find information about expected timing to load orders from a legacy system to CRM and SAP R/3? Does anyone know how long it would take to do the update in CRM using RFC's and BAPI's and then load to SAP/R3 if the order had an average of 3.2 line items per order and there were 50.7 million orders? It is assumed we would run multiple loads concurrently. So I guess a better question is how long does it normally take to load one order with 3.2 line items onto CRM and also SAP R/3?
    Any advise would be greatly appreciated. Thank you.

    Hi Qutubuddin,
    Can you please let me know how you achieved moving data from non sap system to r3 using webdynpro java?
    thanks
    sunil

Maybe you are looking for