BAPI to remove leading zeros from the serial number

Hi All ,
plz can anybody suggest me the alternative BAPI for 'BAPI_SERVNOT_MODIFY_DATA ',whose function is to delete the leading zeros,from the serial number.
Thanks.

Perhaps instead of using a BAPI you can code it like this.
DATA:serial(10) TYPE n VALUE '0000340078',
pos TYPE i VALUE 1.
START-OF-SELECTION.
  WHILE pos <= 10 AND serial+pos(1) = 0.
    pos = pos + 1.
  ENDWHILE.
  REPLACE ALL OCCURRENCES OF '0' IN serial(pos) WITH space.
  WRITE serial.

Similar Messages

  • Remove leading Zeros from the mapped context node(Table)

    HI,
    I have he following requirement:
    In the Leave approval application , in the Approver worklist we have the coloumn to display the resuqester's Perner.
    The perner starts with leading zeros. We have to remove these leading zeros.
    I have refer the following threads:
    Removing leading zeros in a column
    How to remove leading zeroes of string
    and wiki document:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/remove%252bleading%252band%252btrailing%252bzeros%252bfrom%252ba%252bstring
    but I am not able to create the calculated attribute in the Mapped Node( NWDS is not allowing indicating it is not allowed for mapped nodes.)
    Any pointer how I can remove leading Zeros from existing column?
    If I create the calculated attribute outside the mapped node then it is taking only the first value of the mapped node.
    Please note we do not want to modify the RFC.
    _vishal

    Hi,
    Thanks for inputs,
    Now I created a test application where the original structure is as follows in the View Controller:
    1) Context -> Z_Portal_Test_Input (mapped Node/folder) -> IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
    note: this attribute Eid has the values (01, 02,03,04,05)
    2)Context -> Z_Portal_Test_Input (mapped Node/folder) -> Output(mapped Node/folder) ->IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
    Now as per your suggestion I created another node like this
    Context -> Z_Portal_Test_Input (mapped Node/folder) ->testnode(value node) ->testValue(value attribute)
    testnode cardinality is 1..1 and singlton = false
    In the Layout
    The tablecell editor  of one coloumn is mapped to text     Z_Portal_Test_Input.testnode.testvalue
    It is expected that this will show the values like(1,2,3,4,5) but it is showing value(1,1,1,1,1)
    The code of get method is:
      public java.lang.String getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement element)
        //@@begin getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement)
          String  msg =wdContext.nodeZ_Portal_Test_Input().nodeOutput().nodeIt_Itab().currentIt_ItabElement().getEid();
            return removeLeadingZeroes(msg);
        //@@end
    the functon removeLeadingZeroes(msg) is implemented as per the wiki link.
    What wrong I am doing/ missing....
    _vishal

  • How to remove leading zeros from the screen?

    Hello friends,
    I am working on dialog programming.
    I have a field with is NUMC 13. so when value is populated, It removes the leading zeros.
    How can I display the my value with leading zeros on the screen painter?

    Call SE51, layout, double-click on field, attributes, tab Program, check Leading zeros.
    Regards,
    Raymond

  • Removing Leading zeros from query output.

    Hello Experts,
    Is it possible to remove leading zeros from the query output for a particular column?
    I have a characteristics 'Reference Document' which has values like '000001386'. The users just need '1386' to be displayed and have asked us to remove the leading zeros.
    Is there something that can be done for this at a query level? I can't modify the underlying InfoProvider because this requirement is just for one set of users, the other users need the document nmber in the original format.
    Thanks
    Arvind

    Hi,
    you can use ALPHA conversion option in the definition of that particular characteristic.
    Try this code  in a routine.,in query designer;
    data a(9) value '000001386'.
    SHIFT a LEFT DELETING LEADING '0'.
    write:/ a.
    Output will be : 1386
    Or use this method also
    data a(9) value '000001386'.
    Call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
    Exporting
    input = a
    Importing
    output = a.
    write a.
    output:
    1386
    Regards
    CSM Reddy

  • How to remove leading zero from Material Number

    Hello Everyone,
    I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
    Is there any setting in query desinger to handle this issure or in the backend.
    Need your inputs.
    Thanks,
    Lasya.

    Hi
    you can use the function Module
    CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
    to test this go to SE37  --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
    >display -
    > F8
    in the input give 000000456
    and execute
    the out put will be 456
    for getting Zeros you can use
    CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
    Santosh
    Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
    Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM

  • How to remove leading zeros from a string

    Hi,
    I have a situation here where i need to remove the leading  zeros from the incoming data.
    i.e if 0009 then it should be taken as 9
       if 0230  it should be taken as 230
    Regards,
    Ashish

    Hi ,
    Write UDF to parse data .
                    String dataVal="0230";
              int parseVal = Integer.parseInt(dataVal);
              System.out.println("parseVal is "+parseVal);
    result.addValue(parseVal); or return parseVal;
    Nanda

  • How to remove Leading zeros from MATNR "at Database Level"

    Hi,
    When we create a material in MM01 , we can either create material as Internal Material No. or External Material No. (By Explicitly entering a material No.)
    Our requirement is that: When we create an Internal Material , there should NOT be any Leading Zeros in MATNR.
    and for External Material No.  , Leading Zeros Should be there.  (In Database)
    1) Now , we can create the No. Range for material in such a way that it will allow only AlphaNumeric entries for Internal Material , and Only Numeric Entries for External Material No.
    This should slove the Purpose.
    But According to the Client's requirement , Material No can be Numeric OR Alphanumeric for Internal As well as External Material No.
    2) We can Add or Remove leading zeros from MATNR at application level.  i.e.  we can find some BADI / Enhancement where we will Use the Conversion FM (CONVERSION_EXIT_MATN1_OUTPUT or  CONVERSION_EXIT_ALPHA_OUTPUT) and remove Leading Zeros from MATNR. But these changes will NOT reflect at Database Level , Because in MATNR Domain , there is a conversion Routine  , That will Add Leading Zeros in MATNR While saving in the Database.
    3) While Displaying the Material In SE11 , we can also set the "Display Format" as With leading Zeros OR Without Leading Zeros.
    But we dont want to Just "Display" material with OR Without Leading Zeros.  we want to actually create materials in that way.
    What can we do , so that at Database Level our changes are Reflected.
    Thanks and Regards,
    Anand Gore
    Edited by: anandgore on May 18, 2011 3:47 PM

    That will Add Leading Zeros in MATNR While saving in the Database.
    That is because you have it configured that way.  You can configure the storage as you desire.  The default is the behavior you are describing.  You, or your functional analyst, need to review the documentation on the MM config settings for material master number storage.
    Never use CONVERSION_EXIT_ALPHA_OUTPUT for material conversion.  Also keep in mind that the MATN1 functions have their own BADI for extended formatting...

  • Removing leading zeros from a string value

    Hi All,
    i have a Requirement like , i need remove leading zeros from a string value,
    like , 00Raj00Shekar==>Raj00shekar,
    how can i do this ?
    if it is only with the custom functions ,where can add the fuction in Jdeveloper and SOA Middle ware?
    Thanks in Advance,
    Raj

    Hi Raj,
    you can use below function to get the desired output in xsl.
    <xsl:value-of select='translate(oraext:left-trim(translate(<inpString>,"0"," "))," ","0")'/>
    HTH,
    Regards,
    Vikas Manchanda

  • Conversion routine to remove leading zeros from nonnumeric values.

    Hi,
    Can anybody tell me any conversion routine while can remove leading zeros from a character value.
    Eg : 
    input : asdfe
            output : 0000asdfe and vice versa
    I tried with Alpha conversion routine but that is useful only with numeric values.
    Please help.
    Regards,
    Deepti Jain.

    Hi,
    See the following program, and the same logic you can apply in Transfer Rules/Transformations. Take ABAPer help.
    REPORT  ZALPHA_INPUT.
    DATA: ZI(18) TYPE C,
          ZO(12) TYPE C.
    DATA: ZS(12) TYPE C,
          ZR(18) TYPE C.
          ZI = '000000099999889925'.
          ZS = '099999889925'.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT         = ZI
       IMPORTING
         OUTPUT        = ZO.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
        EXPORTING
          INPUT         = ZS
       IMPORTING
         OUTPUT        =  ZR  .
    Write:/   ZI.
    Write:/   ZO.
    Write:/   ZS.
    Write:/   ZR.
    Thanks
    Reddy

  • Remove Leading zeros from column

    How can I remove leading zeros from a column?
    The data looks like *00-04-071*
    The output should display 4071

    user10876532 wrote:
    How can I remove leading zeros from a column?
    The data looks like *00-04-071*
    The output should display 4071try
    select to_number(replace('00-04-071','-','')) from dual

  • How to remove leading zeros from variable

    hi,
       how to remove leading zeros from variable like it_vbap-matnr.
    value in it_vbap-matnr is 000000000000000358
    i want to remove leading zeros so that it become 358
    regards
    deepak

    You can use Function Module <b>'CONVERSION_EXIT_MATN1_OUTPUT'</b>
    This Function Module will eliminate leading Zeros.
    For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
    I think u will not get leading Zeros into utr Internal table when u read from VBAP.
    Bcoz MATNR in VBAP itself have Conversion routine.
    If u r getting leading zeros,U can use following Logic.
    tables:
      vbap.
    data:
       t_vbap like standard table of vbap.
    select matnr
    from vbap
    into corresponding fields of table t_vbap.
    loop at t_vbap into vbap.
      CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
          EXPORTING
            INPUT         =  vbap-matnr
          IMPORTING
            OUTPUT        =  vbap-matnr
      modify t_vbap from vbap transporting matnr.
    endloop.
    Hope this will work.....

  • How to remove leading zeros for an item number within quickviewer

    how to remove leading zeros for an item number within quickviewer. Pls help

    ask your abap guy to do  it. not portal guys business.

  • Remove preceding zeroes from an integer number

    How can i remove preceding zeroes from and integer number.
    Please help...

    what are you talking about? How can an int not have preceding zeros?

  • Can anyone tell me what generation my ipod classic is from the serial number?

    can anyone tell me what generation my ipod classic is from the serial number?

    Append the last three characters of it to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    (117289)

  • Remove the leading Zero from the Query output in SAP BW ?

    Hi
    Experts,
    Vendor Number loaded  as   (0000010076) from R/3 to SAP BW.
    How to remove  Prefix  of Zero for  the Vendor Number(0000010076)  from Quey outpt.
    Regards.
    ASIT

    Hi,
    Please check out this thread.
    Remove leading zeros
    Also check if there is any conversion routine used for that particular infoobject.
    If ALPHA conversion is selected for your infoobject then it will automatically take away the leading zeros at query level.
    Regards,
    AL
    Edited by: AL1112 on Sep 16, 2011 9:15 AM

Maybe you are looking for

  • OAS 4.0.8 and JCORBA does not work

    Hi I want to deploy a corba object on OAS 4.0.8 using JDeveloper 3.0. First i don't find that "automatic tool" that is supposed to be in JDeveloper 3.0 to deploy on OAS. Secondly if i do it by hand i get a compiler error from OAS 4.0.8 that i cannot

  • Incorrect syntax errors in sql server function. Please help.

    This is my sql server function: create function dbo.CleanTheStringAdv (@theString nvar char(500), @CleanMode as int)  returns nvarchar(500)   begin   --define variables declare @strAlphaNumeric nvarchar(500)   declare @i int declare @strChar nvarchar

  • HT1725 Can you re-download a song that you have already paid for??

    I just downloaded a song but when I play it back it stops half way through. I dont know if the internet cut out at that point, but is there any way to get the song back when its already been downloaded??Itunes wont allow you to buy the same song agai

  • Trying to outline a rectange.

    Hi, I have some very simple code that draws a filled rectangle. I would like to outline this rectangle, but can't figure out how. import java.awt.*; import javax.swing.*; import java.awt.geom.*; public class Rectangle extends JFrame{      public Rect

  • Cannot find the new columns I added to a list a week ago

    Hi, I'm using VS2012. I added a couple of new columns to an existing list over a week ago.  Using C# code, I was able to connect to the site and got the list.  Able to update the columns until I got to the new column4,  and then I got exception error