BAPI to update Routing operations

Hi
I want to update inspection characterstics in routing operations,
can you plz suggest any BAPI to update.
Regards,
kranti

Hi Dhirendra,
  I want to update Char.number,Material Insp characterstics,method and sampling Procedure.
as u mentioned in that BAPI,    BAPI_QPMK_SAVEREPLICA,i have found,Material Insp characterstics,method these two parameters,
so how can i uplopad Characterstic no and sampling procedure?
Regards,
Kranti

Similar Messages

  • Bapi to change Routing Operations

    Hi Gurus,
    Could you please tell me whether this Bapi Can be used to do Mass Change for an operation.
    I have found this Bapi : /SAPMP/BAPI_ROUTING_PROCESS
    But it is throwing exception Routing Entry is missing.
    I have filled only operations table and the importing parameters.
    Do I have to fill any other table.
    Please help me in the same.
    Best Regards,
    Navin Fernandes.

    NAVIN FERNANDES wrote:
    Hi Amber,
    >
    > I have created an LSMW and filled respective values with mapping but it giving me error saying
    > ****************************************************************************
    > "Data Transfer of Routings via Direct Input
    >
    >     Error_di_exp         From    To      Obj   Index       Plnnr
    >
    > E    1     1                             M     0000000001
    >
    > E                           1     1      M     0000000001
    >
    > C\ 045 V
    >    You cannot edit the task list object with activity type V
    > *******************************************************************************
    > Could you please help me in the same.
    > I want to change the standard values in the operation.
    >
    > Best Regards,
    > Navin Fernandes.
    this looks to be a functional error. Can you check again with your functional consultant.

  • Routing Operation item field update in configurable material

    Hi All
    Material is a configurable material ,which is having a selection options in a sales order and based on the selection options there is characteristics BOM quantity gets updated based on the formulae.
    If you go to routing and double click on the operation to see the details , you will see the unit of measure conversion with the header and Operation fields. I want BOM quantity should get updated in the operation field (UMREN).
    I was using the Reference characteristics with PLPOD table and UMREN field to update the value in the UMREN field. And i created a procedure with a logic and is assigned to configuration profile and the Routing operation.
    Process is MTO process, Production order is generated when the sales order is created. i checked in production order after creating a sales order, UMREN field is not updated and dont know what where i am doing mistake and i also checked in the Routing Master Data there also its not updating.
    Above mentioned is not an requirement but to calculate the costs accurately, we have to approach this way.
    Please suggest.
    Thanks,
    Quantum

    hi all,
    this problem is solved...its was a simple thing...go to extra in operation tab of routing, then go to references and there is an option of unlock....
    and bingo...the problem is solved.
    best regards,
    Maulin

  • Need to select all equipments (PRT) for a plan (routing) operation (PLPO)

    hi,
    I need to select all assigned equipments (PRT) for a plan (routing) operation (PLPO).
    Can anybody tell me the database table relation or is there a function module or a BAPI or something like this !?
    Thanks
    Olaf
    Edited by: Olaf Krüger on Feb 20, 2008 12:03 PM:  BADI to BAPI

    I suppose you have every PLPO needed (else look at function module WOSTS_TASKLIST_READ_FROM_DB)
    Then read
    PLMZ Allocation of bill of material items to operations
    STPO BOM item
    SELECT * FROM plmz INTO TABLE t_plmz
        FOR ALL ENTRIES IN t_plpo
        WHERE plnty = t_plpo-plnty
          AND plnnr = t_plpo-plnnr
          AND plnkn = t_plpo-plnkn.
      SELECT * FROM stpo INTO TABLE t_stpo
        FOR ALL ENTRIES IN t_plmz
        WHERE stlty = t_plmz-stlty
          AND stlnr = t_plmz-stlnr
          AND stlkn = t_plmz-stlkn.
    Regards

  • Bapi to update order header user status

    Hi
    Please suggest any FM or BAPI to update header user status or if no user status exist then it will add the User status at header level.
    Thanks
    Aditya

    Hi Aditya,
       Object key is nothing but the Order number.
       If you are changing the header level data the Object key is ordernumber. Example: 000300001487
       IF you want to change the Components or Partners or  Operations then we have to specify the line item number along with order number.
      Example : if line item 0020 needs to be changed then Object key = 0003000014870020.
      Hope this may be useful.
      Regards,
      Sravanthi

  • I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

    I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • I have recently updated the operating system on my iPad. Now my alarm is silent and my FaceTime doesn't ring aloud when a call comes in. How do I fix this please?

    I have recently updated the operating system on my iPad. Now my alarm is silent and my FaceTime doesn't ring aloud when a call comes in. How do I fix this please?

    Do you see a half moon icon in the upper right corner of the screen? If so, you have Do Not Disturb enabled. Settings>Do Not Disturb. Turn it off.
    Or do you have system sounds muted?
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center. Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    About the iPad Side Switch - Apple Support

  • BAPI to update a single characteristic in IE02

    Hi,
          I am trying to update a single characteristic in IE02.I am able to do that with the BAPI "BAPI_OBJCL_CHANGE",but this BAPI is updating only 1 characteristic and is initializing all the remaining characteristcs.
          Any pointers on this is highly appreciable.
    Navin

    Hi,
    the documentation of the bapi says:
    Caution
    This BAPI only changes the parameters of an existing assignment (or creates a whole new assignment), but it does not delete the assignment to a class and replace it with an assignment to another class. If you want to reassign an object, the old assignments must be read with BAPI_OBJCL_GETCLASSES and deleted with BAPI_OBJCL_DELETE, then the new assignments must be created with BAPI_OBJCL_CREATE.
    The information transferred by this BAPI replaces all old information. An empty field means "delete entry!", not "no change".
    This BAPI does not change the database. To change the database, call BAPI BapiService.TransactionCommit afterwards.
    You can only use this BAPI for objects that are not classes!
    This BAPI only processes assigned values for classification - not for configuration
    so i guess you have to pass all information you do not want to lose.
    i´ve  found this as well:
    http://www.sapfans.com/forums/viewtopic.php?t=125320
    Best regards.
    Edited by: Pablo Casamayor on Jan 2, 2009 7:08 PM

  • I updated my operating system to Maverick. How can I get the ability to double tap my mouse to enlarge the page back?

    I updated my operating system to Maverick 10.9.4. How do I get the ability to double tap my mouse so the page will enlarge back?

    Thank you so very much! I have got 1 Masters online and am working on #2. Yet I am so very computer illiterate. I was able to fix it in less than a minute. Again, thank you.

  • BAPI for updating Maintain Duration in Transportation and Delivery scheduling

    Hi all,
    Iam looking for a BAPI to update the Duration Times in Transportation and Delivery scheduling. I reluctant to use recording on SM30 Table maintenance T code and use it in LSMW. Is there a BAPI or Standard i/p Program to load these details. I have more than 200000 records to input.
    A list of all BAPI's in Transportation Management module would be great as well.
    Regards,
    Avi

    Hi,
    @praveen: I tried the solution provided by you and it worked for me in this context. But it seems this BADI gets triggered every time the delivery is getting saved. So for my test purposes, I'm triggering this BADI in a program, but in actual scenario, the BADI would be called on every sy-ucomm = 'SICH_T' i.e. SAVE. hence, I can't separate my piece of code using this condition.
    I'm trying to call my FM(update module in collective run mode) inside this BADI in backgrnd task as a separate unit but this doesn't seem to work.
    Any more suggestions?
    Thanks
    Ashish

  • BAPI to Update the OA/PO with the new partners from vendor masters

    Hello All,
    We got a requirement to update the Contract or purchase order with new partners from vendor  master.
    In brief the partner information of a  PO when created with reference to a contract  will be reflected from the contract but not from Vendor Master partners .So when the vendor master got changed after the creation of the Contract the partner information in the PO is not in synchronous with Vendor Master partnes.
    Hence please help us with any BAPI to update the PO partners with Vendor masters .
    Regards
    Kalyani

    MAP2e_lfa1_to_bapivendor_04
    MAP2e_lfa1_to_bapivendor_05
    will be helpful

  • Need name of a function module or BAPI to update the Tax Classification val

    Hi Guru's
    Need name of a function module or BAPI to update the Tax Classification value for Material master.
    Thanks in advance.

    Hi
    U can try to use BAPI_MATERIAL_SAVEREPLICA
    Max

  • Photoshop Elements 11 will not allow me to open files after I updated my operating system

    I recently updated my operating system with the latest upates. Now, I when I got into Elements and I try to open a file, the window where you normally click the file disappears before I can click anything.  Then I have to force quit because everything is grayed out and I can't click anything.  I have contacted adobe support but they said it is most likely a mac problem becuase the program works fine when I log into another user account. They said to contact Macsupport to check the permission for Adobe products on the current user acount.  Also, some people suggested to turn off the active corners, but that didn't work.  Anyone else have a suggestion?

    Sarah
    I am having the same issue and all since I updated to the Maverick OS (well it seems that way anyway).  I am currently going through the process of repairing permissions, removing other pieces of 'non standard' software on the Mac, uninstalling Elements 11, doing a safe boot and then a download of the package again and trying a completley new install.  If this doesn't work it will be a fresh user account and start again.
    There were some very helpful hints from folks about remmoving other unnecessary software which did help stablise other issues but I still cannot get Element to work.
    You could have alook at these links to see if anything helps with your issues - the last one seems most relevant;
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-errors-freezes-install -photoshop.html
    https://discussions.apple.com/message/23903833#23903833
    http://feedback.photoshop.com/photoshop_family/topics/photoshop_elements_11_fail ing_on_imac_after_upgrading_to_os_x_mavericks
    Good luck and let me know how you get on.
    G

  • When i go to type in pages, nothing shows?  I recently had an authorized apple technician replace my hard drive and update my operating system to MAC OS X 10.6.8 .  Are they related. I Have Pages 08' 3.0.1

    When I go to type in Pages, nothing shows.  I am able to open up and click on word processing template etc. I have a fairly old IMac and just updated my operating to OSX 10.6.8.  I'm wondering if the upgrade affected Pages - have  Pages 08 version 3.0.1.  tried restarting but did not work. 

    Thanks for your help.  I downloaded the update from the link, however, this did not automatically update my Pages.  Is there something else that I have to do? I located the download in Finder and clicked on it.  When I clicked on the update, A dialogue box appeared saying "Alert - An eligible Pages application was not found in the location /Applications. What does this indicate?

  • I'm trying to update my operating system from mac OS X 10.5.8  where do I go first?, I'm trying to update my operating system from mac OS X 10.5.8  where do I go first?

    How do I go about updating my operating system from the mac os x 10.5.8 to mountain lion?? 

    Click here and read all three steps to the bottom.
    (83996)

Maybe you are looking for