BAPI_USER_GET_DETAIL - Last Logon Date not available

From R3 I want to check the last logon Date (USR02-TRDAT) of a user in an outside system such as EBP or BW. BAPI_USER_GET_DETAIL seemed like a good choice but TRDAT is not passed to the BAPI. Last Logon Time is (LTIME) but not Last logon date (TRDAT). How can this be easily done.
Thanks,
-don.

the problem with this is that it makes a call for each user. If you have 100k users it becomes a very inefficient process.
If you build something in the backend to collect the details a useble format....1) it is custom, and 2) you need to deply in each backend and 3) maintain it in each backend.
not a good solution.
If anyone has better idea please shout. Again....this RFC call does the job.....but it is like empting a pool full of water with a teaspoon, does the job but very inefficiently.
DenisO

Similar Messages

Last Logon date and Logon time not updating in table USR02

Hi,
Please help us on this. After customer successfully logged in the webshop, we are checking the table USR02 in CRM system and the Logon date and Logon time is not updated. Because of this, the customer will be locked after certain number of days. When we check it in ECC system, customer's last logon date and time is updated. Can you tell us what could be causing this? Any advise what we need to check? Thanks in advance!
Regards,
Mike

Hi
1. Please check if the USAPPLREF table in ECC has the correct mapping done between the LOGON User and the Sold-to party (Customer)
2. Please check the validity of those user in SU01 user data.
3. Please check the USERS data from the USERADMIN Link (if it is configured in your scenario through XCM settings for USERS)
Hope this will help.
Regards

PowerShell Active Directory: Get last logon date of a deleted user

So, my first post in this noble community. I've been lurking here and I've been getting some good information. Hopefully, you guys can help me in this concern which may be simple to some but I couldn't seem to get around it.
Is it possible to get the last logon date of a DELETED user in Active Directory?
I can get the available properties of deleted users using the following:
Get-ADObject -Filter {samaccountname -eq <account_name> -and ObjectClass -eq "user"} -IncludeDeletedObjects -Properties *
But the last logon date is not one of the properties available from Get-ADObject. Get-ADUser has the last logon property, but it does not have data on deleted users. Is there anyway this can be achieved? Perhaps convert an ADObject to an ADUser?
Any information would be much appreciated. Thank you.

Thanks everyone for your response. It looks like jrv is leading me to the right path, but I'm still having issues. I'm trying to get the lastlogon time by querying all the DCs in our domain, but every query returns a null lastlogon time for all the deleted
users I tried:
$DomainControllers = ((Get-ADForest).Domains | %{ Get-ADDomainController -Filter * -Server $_ }).Name
foreach ($DC in $DomainControllers)
 $dn=(Get-ADObject -Filter {samaccountname -eq <user_account>} -includedeletedobjects -server $DC).DistinguishedName
 $user=[adsi]"LDAP://$dn"
 $user.LastLogon
It always returns null. Morever, simply executing [adsi]"LDAP://$dn" from each DC gives the following error:
format-default : The following exception occurred while retrieving member
"distinguishedName": "There is no such object on the server.
 + CategoryInfo : NotSpecified: (:) [format-default], ExtendedType
 SystemException
 + FullyQualifiedErrorId : CatchFromBaseGetMember,Microsoft.PowerShell.Comm
 ands.FormatDefaultCommand
It's a bit surprising to me though, since $user=[adsi]"LDAP://$dn" does return a value for $user (instead of null whenever an error is encountered) of type System.DirectoryServices.DirectoryEntry but it has no members.
Anyone know what I'm missing?

Is there a system table or V$ view that will show a user's last logon date?

Is there a system table or V$ view that will show a user's last logon date?
I'm using Oracle 9.2.0.7

sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Tue Aug 31 12:44:42 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: / as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> desc user$
Name                            Null?    Type
USER#                            NOT NULL NUMBER
NAME                            NOT NULL VARCHAR2(30)
TYPE#                            NOT NULL NUMBER
PASSWORD                             VARCHAR2(30)
DATATS#                       NOT NULL NUMBER
TEMPTS#                       NOT NULL NUMBER
CTIME                            NOT NULL DATE
PTIME                                  DATE
EXPTIME                             DATE
LTIME                                  DATE
RESOURCE$                       NOT NULL NUMBER
AUDIT$                              VARCHAR2(38)
DEFROLE                       NOT NULL NUMBER
DEFGRP#                             NUMBER
DEFGRP_SEQ#                             NUMBER
ASTATUS                       NOT NULL NUMBER
LCOUNT                        NOT NULL NUMBER
DEFSCHCLASS                             VARCHAR2(30)
EXT_USERNAME                             VARCHAR2(4000)
SPARE1                              NUMBER
SPARE2                              NUMBER
SPARE3                              NUMBER
SPARE4                              VARCHAR2(1000)
SPARE5                              VARCHAR2(1000)
SPARE6                              DATE

Last Logon Date for Deleted Users

Hi,
How can I checked to see last logon date for a deleted user-SAP ECC 6.0?
-Wes

> ... chekcing USR02 the TRDAT field has been reset.
In lower releases you could easily have made a big mistake doing that.
In all releases the security audit log (SM20) is the correct tool for this, but you cannot retro-fit it.
If the SM20 log is not activated for logon events, then there are several other ways of reconstructing parts of the information but they are all incomplete and a big effort.
Cheers,
Julius

I bought Married to Jonas season pass and the newest episode that aired last night is not available. Normally the episodes are available the next day. This one is not even on the Married to Jonas download page. Will it be available and when?

Normally the episodes are available to download the day after airing date. But this time, the episode that aired last night is not available to download. I'm just wondering if that episode for Married to Jonas will be available in a later date or not. I did purchase the season pass.

I created a support incident Saturday or Sunday.
Their first response by email asked
"... include your purchase's order number in your reply. You can find your order numbers on your email receipts and in your Purchase History. If you need to review your Purchase History, follow the steps in this article: http://support.apple.com/kb/HT2727 ...."
They made it sound like it was my problem they would help me figure out. They already had my Apple ID so I don't know why they couldn't find the info. My luck they sent the email at 7:30 last night. The person working on my case only works Sunday - Thursday 4:30 - 11:30 pm so it will be tonight before they get my response. Nobody else can work on the problem? Come on Apple!
I mentioned this thread so they may or may not look here also.
Still very unimpressed with Apple TV process quality and the huge customer support hole. It's like they're completely unprepared for mistakes. Everybody and every company makes mistakes.

Last logon date

Hi,
I am working on EP 7.0 SPS 13.
We have LDAP & UME as data source.
Is there any way to get last logon date for all users?
UME method for getting last logon details is deprecated.
What is alternative way?
I need to get list of all users who have not logged on to portal for last 30 days.
Is there any way to achieve this?
Regards,
Apurva

Hi Michael,
Thanks for the link.
Our requirement is that if user is not active for say 30 days his userid should be locked and after say 60 days it should be deleted.
In order to determine inactive users we need information about logon details for user ids. Portal Activity Report - Details of users who logged on does not consider reporting period and hence is of no use.
Is there any operation in this web service which can provide us this information?
Regards,
Apurva

Search for User by last logon date no longer works after upgrading to SPS18

We used to be able to Search by last logon date under User Administration as a quick way to find out who logged on for a particular date. It worked well, but only for a single date range. We were on EP 6.0 SPS13 at the time. Since we have upgraded to SPS18, it no longer works. All we get back now is no user found no matter what date we enter.
Has anyone else experienced this problem? I've been searching and haven't found anything. I wanted to try and get more information before I create an OSS message.
Thank you,
Kathy

it's since SP16, to be correct: http://help.sap.com/saphelp_nw04/helpdata/en/43/bc6b9202454dece10000000a422035/frameset.htm
kr, achim

Today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet

today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet
but card was charged full amount and i havent gotten anything else been checking for update all day and got nothing i did order iphone 6 plus at 3:01am and everything went through and i was finsihed at 3:06am

chriss2633,
I know how exciting it is to have all the information on the new phone. I did send you a Direct Message. Can you please respond back to that message? Looking forward to hearing back from you.
KevinR_VZW
Follow us on Twitter @VZWSupport

"Expected Ship Date: Not available at this time." Please help.

I ordered an iphone 6 plus gold at 12:01 AM PST. My email confirmation says "Deliver By: 09/19/2014". However, when I go to check the status of my order it says: "Expected Ship Date: Not available at this time." Please help. Thanks!
Please PM with details if possible. Thanks in advance!
Subject was edited by: Verizon Moderator

Hello JFull14. Making sure that your order is still on track is very important. By chance, has there been an update to your order status screen? http://vz.to/Ulymw6
If not, I have sent you a DM so we may help look into this.
NicandroN_VZW
Follow us on twitter @VZWSupport

DB USER Last Logon Date

Hi All,
How to find a Database USER last logon date on 10g? by script.
Thanks,

You need to enable auditing to view history in audit files. In v$session you can see only connected sessions.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1830073957439
http://www.dba-oracle.com/art_builder_sec_audit.htm

"Mobile Data Not Available", Nokia 700

Hey all,
I have a bare bones pay-as-you-go plan. All I get are free unlimited texts and free unlimited calls (within the country). I get no data and, frankly, I don't care for data. I do get annoyed that every so often while playing Angry Birds or using Nokia Maps or any of a number of other applications I will get the "Mobile Data Not Available" notice. How can I disable this notice? It is tiring and I KNOW I don't have Mobile Data. Duh! Thanks in advance for any help.

Hello TheRooster, the games are provided with some advertising option. This is Because the games are provided for free. If you buy the full version of the games then this won't occur.
Nokia C7

Query users, access level and last logon date

Hello, Does anybody know how to query Essbase to look up users accesslevel and last logon date? Rey Fiesta

It can be done using the API. Access level is a little complicated because it can be by individual or group they belong to and it of course is different by application/database

Script to pull out last logon date

Hello,
I have a list of user that I would like to pull out last logon date from AD.
This is the script I am using at the moment but it produces blanks and I don't know what the blanks mean.
Import-Module ActiveDirectory
#This script requires PowerShell AD Module
Import-csv "c:\scripts\samaccountname.csv" |
foreach-object {get-aduser $_.samaccountname -Properties lastlogondate} |
select name,Lastlogondate |
Export-csv c:\scripts\LastLogon.csv -NoTypeInformation
Please can you help?
Kind Regards, PenDraKon

If you want an accurate lastLogon date, you have to check across domain controllers.
Here's an advanced function I created a while ago for this.
Function Get-LastLogon {
<#
.SYNOPSIS
Returns LastLogon information
.DESCRIPTION
Queries the LastLogin information for a user across domain controllers and returns the highest (latest) value
.EXAMPLE
Get-LastLogon User
.EXAMPLE
Get-LastLogon -Identity User
.EXAMPLE
Get-ADUser User | Get-LastLogon
.EXAMPLE
Get-LastLogon User1, User2
.PARAMETER users
List of users - pipeline can be used
#>
[CmdletBinding()]
param
[Parameter(Position= 0,
Mandatory=$True,
ValueFromPipeline=$True,
HelpMessage='What user would you like to find the last logon for?')]
$identity
Begin {}
Process {
Foreach ($account in $identity) {
$dateStamp = $null
$domainController =$null
Get-ADDomainController -Filter * | Foreach {
$dc = $_.HostName
$lastLogon = (Get-ADUser $account -Properties LastLogon -server $dc | Select-Object Name,@{n='LastLogon';e={[DateTime]::FromFileTime($_.LastLogon)}}).Lastlogon
If ($dateStamp -le $lastlogon)
$dateStamp = $lastlogon
$domainController = $dc
} # End of ForEach
$properties = @{
Name=$account;
LastLogon=$dateStamp;
DomainController=$domainController}
New-Object -TypeName PSObject -Prop $properties
} # End of ForEach
} # End of Process
End {}
} # End of Function
You can then run...
Import-CSV ".\samaccountname.csv" | % {Get-LastLogon $_.samaccountname}
or...
Import-CSV ".\samaccountname.csv" | % {Get-LastLogon $_.samaccountname} | Export-CSV ".\report.csv" -noType

Data Not Available. Statspack data is not available for this database insta

Hi,
while trying to configure the 9i db on grid control I installed the statspack data while configuring it. But now when I try to see the historical data as part of the performace tab for the 9i db it complains as below
Data Not Available. Statspack data is not available for this database instance. Make sure that Statspack is installed on the target instance.
Please shed some of your inputs.
thanks in advance
PK

Hi,
I think it is not installed.
Using 1097660794 for database Id
Using 1 for instance number
, stats$database_instance di
ERROR at line 9:
ORA-00942: table or view does not exist
I did exactly as it said while configuring the db. but seems like something is wrong. Can you please advise me on how can I install it in commandline.
Thanks
PK

BAPI_USER_GET_DETAIL - Last Logon Date not available

Similar Messages

Maybe you are looking for