BAPI_VENDOR_CREATE can we cal from NON-SAP

Hi All,
BAPI_VENDOR_CREATE can we call this bapi from nons sap system.
Thanks,
Kiran

Hi,
Yes i think so since it is a RFC enabled FM you should be able to...
REgards,
Himanshu

Similar Messages

How Can we get the data from Non-SAP to SAP in WebDynpro

Hi,
I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
Help out with the steps for getting the data or procedure.
Regards,
Mutyapu

You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
Regards,
Nithya

SSO from non-SAP application to EP system

Hi all,
Is it possible to configure the Single sign-on from non-SAP application to SAP Enterprise portal?
My requirement is
I have a link to "Enterprise Portal" in my company's website home page. If I click on the link, it should directs to EP portal with out asking for logon.
Please suggest, is it possible??
Regards,
Sujoy

Hi Sujoy,
SSO implementation to non-browser applications i.e non-SAP systems is possible in 3 ways which are listed .Can find useful info in the below links.
http://help.sap.com/saphelp_nw70/helpdata/EN/12/9f244183bb8639e10000000a1550b0/frameset.htm
among the non-browser applciation if it is an MS dotnet system then the below article will give a clear understanding of SSO implementation.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f05ae0f0-bf93-2b10-ed9e-a7320c012841
Regards
Supraja

SSO from Non-SAP portal to EP

Hi.
We need SSO from Non-SAP portal to EP.
The Non-SAP Portal has publish Form-based authentification.
I mean userid&password set to URL.
Then the EP can generate SAP Logon ticket to backend system?
regards,

How to Enable Single Sign-on with Non-SAP Web Application
I have very good material coollected for the same implement this.
http://help.sap.com/saphelp_nw04/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7b5ba90-0201-0010-4dbc-8f999dcd2798
Cheers!!
SJ.

Uploading data from non sap system to sap system

hi to all experts,
my requirement is to upload data into the sap system from non sap system . the data is in a flat file ,but the problem is that in the flat file all the field lengths and fields are not in order or same as sap system. How to upload the data into sap system ....

hi,
the data is in a flat file,but the problem is that in the flat file all the field lengths and fields are not in order or same as sap system.
If the data is in excel sheet use this FM.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      FILENAME                      = P_FILE
      I_BEGIN_COL                   = 1
      I_BEGIN_ROW                   = 1
      I_END_COL                     = 17
      I_END_ROW                     = 3000
    TABLES
      INTERN                        = itab
EXCEPTIONS
INCONSISTENT_PARAMETERS       = 1
UPLOAD_OLE                    = 2
OTHERS                        = 3
It will read the data from excel sheet column wise and then store it in ITAB. you can change the order after reading the file.
In case of Text file use FM GUI_UPLOAD.
You can change the order of the fileds after reading it from file, but the length and all you have to make compatible to SAP standard fields.
Regards,
Sachin

Open Data Set Error while trying to read file from non SAP server

Hi all,
is it possible to read data from non-SAP application Sever?
I'm using OPEN DATASET p_filin FOR INPUT IN LEGACY TEXT MODE CODE PAGE '1504',
Where p_filin is other Windows server.Our applicition server is under Unix.Is it a problem?
I make test to read file from SAP application server and it was ok.So how to call other server?
Thanks!

Hi,
Yes it is possible to read data from a non SAP server through the statement OPEN DATASET.
The important thing to check is that the SAP Server got enough access to the non SAP server so it can perform a reading/writing process depending on your needs.
You should contact your network administrator and BASIS to help you check the permissions. This can be pretty tricky, specially if the servers are in different domains.
Regards,
Gilberto Li

Receiving IDocs from non-SAP system ...

Hello guys,
I have problem with implementing IDoc-XI-IDoc scenario. The sender system is a subsystem (non-SAP system) sending IDocs but XI is not able to receive them. I thing the IDoc metadata can not be found.
Logical system name of the sender is IF6020DEV. I registered the system in SLD. In Integration Directory I imported the Bussines System IF6020DEV to my scenario and I created communication channel of type Sender IDoc Adapter in it.
In IDX2 I created new port called IF6020DEV and I copied needed metadata into the port. But it doesn't work. Probably I don't do it right because I'm beginner with SAP XI.
Could you give me any advice how to configure XI for receiving IDocs from non-SAP system?
Thank you in advance!
Regards
Zbynek

Thank you very much. The issue described in refered discussion is almost same issue what I'm solving. Unfortunetally the described solution dosn't work for me.
The sender system still returns following error. I know you probably won't understand it because you don't know the subsystem, but maybe you could get some idea what is wrong.
05/29/09 16:09:19.482 idoup2 Logon...
05/29/09 16:09:19.482 idoup2 RfcOpenEx (TRACE=1 CLIENT=110 USER=xxxxxx LANG=D LCHECK=1 GWHOST=xxxxxx GWSERV=3361 ASHOST=xxxxxxx SYSNR=61 PASSWD=<password>)
05/29/09 16:09:19.529 idoup2 Logon RfcOpenEx result=1
05/29/09 16:09:19.607 idoup2 Call to (IDOC_INBOUND_ASYNCHRONOUS) failed (3)
05/29/09 16:09:19.607 idoup2 Handle=1
05/29/09 16:09:19.607 idoup2 key............:
05/29/09 16:09:19.607 idoup2 status.........:
05/29/09 16:09:19.607 idoup2 message........:IDoc-Adapter Eingang: Der Absenderport ist initial
05/29/09 16:09:19.607 idoup2 internal status:
05/29/09 16:09:19.607 idoup2 idoc_upload failed with rc=(3), try(2)
05/29/09 16:09:20.607 idoup2 key............:IDoc-Adapter Eingang: Der Absend
05/29/09 16:09:20.607 idoup2 status.........:EXCEPTION SYSTEM_FAILURE RAISED
05/29/09 16:09:20.607 idoup2 message........:IDoc-Adapter Eingang: Der Absenderport ist initial
05/29/09 16:09:20.607 idoup2 internal status:
05/29/09 16:09:20.607 idoup2 idoc_upload failed with rc=(18), try(1)
05/29/09 16:09:21.607 idoup2 Logoff...

Call rfc sender adapter from non-sap systems

Hi,
is ist possible to connect to an rfc sender adapter from non-sap systems? I want to use the the RFC-Connector from http://rfcconnector.com, but in the client connect options there is no way to specify the program id.
Best regards,
Daniel

hi,
you don't need to use RFC type T (with program ID) - you can use whole connection string - just like in the example:
http://www.rfcconnector.com/documentation/examples/client/#functioncall
so just specify: host system number etc.
it should work like that - but let me know as I don't know this RFC connector
Regards,
Michal Krawczyk

Invoice posting for the PO from Non-SAP system

Dear Friends,
I have one requirement like from Non-SAP system PO details will be accessed from SAP and after certain calculations Invoice will be posted for the same PO back to SAP.
Everything needs to be done in Non-SAP system by accessing SAP system.
There are some BAPI which can be used for the purpose, but I am not able to get the correct BAPIs to get the PO details and Posting the Invoice for PO.
Please anybody can help me out with the BAPI details.
Thanks in Advance.

Hi,
Use following BAPIs
BAPI_PO_GETDETAIL - To get Purchase Order details
BAPI_INCOMINGINVOICE_CREATE - For Incoming Invoice
Regards
Vinod

Stop generation of Inbound IDOC from Non - SAP

Hi Experts,
I have a requirement to update data base PA0105 for Email. The Email is coming for external system (Non SAP), which contains 1 employee in 1 IDoc. If SAP has valid email and same has been passed for external system to SAP via Inbound IDoc, it should not update PA0105. Hence, I am deleting the IDOC segments in Exit "ZXHALU07", before RBDAPP01 is getting called. As per the requirement its working fine.
Question: Is there any way to stop generating the IDOC. If the email ID were same, then IDoc should not generate in SAP. Please provide your valuable reply. Thanks.
Regards,
Ganesh R K.

Hi All,
Scenario:
Need to Create Inbound IDOC in SAP system and receive it from Non Sap system.
Problem:
IDOC is successfully dispatched from Non Sap system(Sender Side) but, it is not received to SAP system(Receiver Side).
At receiver side(in SAP system) all configuration settings are fine (RFC destination is tested with no errors, partner profile are given with the inbound parameters, function module is successfully tested with no errors, distribution model is created etc).
In receiving system(SAP) no IDOCs are generated in We02 after sending the IDOC from Non Sap side.
Can any one please suggest me the reason for the above mentioned problem?
Thank you,
Swetha.C

Triggering SAP workflow from non-SAP system

I am trying to use WF-XML to trigger a workflow in SAP from non-SAP system.
I have already created a workflow template in SAP and want to test the scenario if this will be really hit by the incoming xml message.
Questions:
1. How the data from incoming xml is tranferred to workflow container element? IF system does it, how is done? If not how to address it?
2. Do we have some tool here, to simulate this situation - to create a test xml incoming message with SAP and really see if that triggers the desired workflow template. Pupose is testing the scenario first in SAP and then going to the other system to test the real interface.
This is somewhat similar that we see in incoming IDoc. In Idoc we can simulate the incoming IDoc structure and test.
Is any one here who can guide on this?
Thanks in advance.
Rgds.

Hi,
You don't need a triggering event. In the xml it says which workflow should be started. You don't need a class to fill the container. The service does this.
I think there is a way to generate an example xml but I don't know exactly how. In the <a href="http://help.sap.com/saphelp_nw70/helpdata/en/54/de9e3887d6174fe10000009b38f842/frameset.htm">SAPHelp</a> there are some examples of the documents. Check also the entry above it about the creation of a WF_XML document. In the first and third example it shows a container element and its value (QUESTION).
Try to get a copy of the book "Practical workflow for SAP" by Alan Rickayzen. It has got a part about this.
Also check this link from the SAPHelp:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e8/ea8d380be34e6ce10000009b38f842/frameset.htm">Call Tab Page</a>
Regards,
Martin

Data load into SAP ECC from Non SAP system

Hi Experts,
I am very new to BODS and I have want to load historical data from non SAP source system into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
Regards,
Monil

Hi
In order to load into SAP you have the following options
1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
Customer Master - DEBMAS
Article Master - ARTMAS
Material Master - MATMAS
Vendor Master - CREMAS
Purchase Info Records (PIR) - INFREC
The list is endless.........
In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
Do let me know if you need more info on any specific queries or issues you may encounter.
kind regards
Raghu

BAPI for calling Z transaction From NON-SAP system

hi all, am new to BAPI i want to know that can we call any standard or Z transaction from NON-SAP system using BAPI if yes then plz let me know how.???
thanx...

BAPI's are not used for calling transactions. They have the same result though, a business partner for example kan be created, and maintained via the GUI, but it can also be done via a BAPI. These BAPI's are created for calling them from (non-) SAP systems since they are remote enabled. However, this means that the calling application / party will have to 'build' some sort of application themselves in order to call these BAPI's from 'outside' of the SAP system.
The calling application will have to have access to the system, which can be maintained in the remote destination transaction SM59.
But enough of this, there are lots and lots of posts on SDN about BAPI's, remote destination etc.

File Transfer from non-SAP System.

Hi Experts,
We have the requirement to copy/transfer file from non-SAP system to SAP system file server. Can we use these FMs FTP_CONNECT, FTP_COMMAND and FTP_DISCONNECT?
or can we also use SXPG_COMMAND_EXECUTE?
Thanks,
Edson

Hi Varma,
Thanks. I'm looking at the FTP_COMMAND FM. If I got it right the 'command' parameter here should be the OS level commands? Example would be cp <file path from source> <file folder of destination> for unix. ?
Thanks again,
Edson

What ATP category to use when loading from non SAP system

Hi Experts,
We are sourcing transactional data from SAP R/3 and using CIF to transfer these data to APO.
Now we have new sets of material locations where we are going to source transcational data from non-SAP system. We are going to extract file from non-SAP system and load it to APO. My question is, do I need to create new categories (non SAP categories) for all these transactional data (sales order, production order, purchase order, etc...) Or can I just use existing SAP categories that are getting populated when data are coming from R/3 through CIF.
If its possible, can I use RLCDELETE to delete previously posted transactional data? because we are planning to do full refresh and reload everyday.
Appreciate your help. Thanks
Regards,
Mylene

Hi My lene,
If i undersood your question correctly, you are trying to upload transaction data into APO system using file interface.
You can use custom or standard ATP categories to upload any type of transaction data and deletion of those orders also possible for both the ATP categories using RLCDLETE report (except salesorder and fixed planned orders, they can be deleted by SDORDER_DEL & DELETE_PP_OREDER reports respectively).
Custome categoires will be used in case additional data needs to get stored in APO system along with the standard transaction data coming from ECC system . For example, salesorders coming from ECC and uploaded from file.
If the transaction data coming from only one source system then it is better to use standard categories.
Hope this answers your question.
Thanks & Regards,
Jagadeesh

BAPI_VENDOR_CREATE can we cal from NON-SAP

Similar Messages

Maybe you are looking for