Bapi with external number range

i am using bapi_goodsmvt_create.i want to assign external number range.how it possible?

It depends on whether you have a service master or not.
1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
Makes sense?
A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
Regards,
Ravi
Message was edited by: Ravikumar Allampallam

Similar Messages

  • Sd invoices posting with External number range

    Hi,
    i am a fico consultant and dont know the proceedure that how to post SD invoice thorugh Sales orders with external number  range?
    while posting it is giving error like use internal number range.how to over come this.help me
    Thanks
    Prathima

    Good Afternoon Prathima.
    Use tcode OBA7
    Look for Doc type RV Billing Doc trn.
    This doc is generally used for posting Billing doc to accounting.
    Here you would find Number range as external.
    Reason: As per standard, the Accounting doc number is similar to your the Billing account.So, that there would not be any difference in numbers of both, therefore for accounting doc - Billing doc trnsfer (RV) the number range is Internal number but the Billing doc type will havre internal number range.
    And as you are FI consultant, I don't feel I need to explain why or purpose these numbers should be similar from accounting point of view.
    Hope it solved your query. Kindly reward.
    Take care. JP.

  • Purchase Order (PO) Inbound with external number range

    We need to create a interface for Purchase order Inbound.
    The PO will be created in 3rd party system, and the information is sent thro IDoc(Orders05). How do we create a PO in SAP with the same PO number as in 3rd party system.
    We have allowed PO with external number range.
    I couldnt find a Segment or field where the PO number can be mapped in the IDOC.
    Points will be offered for useful informations.
    Thanks,
    Sivaraman

    Hi Sivaraman,
    could you tell me how you solved it. I have the
    same problem and didn't find the solution yet.
    Thanks a lot!
    Horst

  • Creation of HU in auto mode with external number range

    Dear Experts,
             I'm stucking in a scenario related to HUM
    There are two handling units -
    1. Bag
    2. Pallet
    through T code HU02 , it's possible to create an HU and assign it internal generated number.
    But as per our requirement , we want to assign the external number to the HU (which is barcode number of bag or pallet)
    Can you pls let me know the process of assigning External number range to HU.
    Also we want to create the HU automatically after GR in production (MIGO,101) , instead of manually via HU02.
    Pls explin the process of creation of HU automatically also...
    Thanks in advance..

    Check with FM BAPI_HU_PACK.For packing an item into HU.
    For external number range you need configure external number range
    SPRO>Logistics - General>Handling Unit Management>Basics>Technical Basics-->Define Number Ranges for Handling Units.
    After GR  for production you need to confighre internal number range for perticular packing material type then system will automatically pack and place in HU location.
    Please find some FM info
    =========================
    HU_BASIC_BAPIS                 Basic BAPIs for HUs                     
    BAPI_HU_CHANGE_HEADER          Change Handling Unit Header Data        
    BAPI_HU_CREATE                 Create Handling Unit with Items         
    BAPI_HU_DELETE                 BAPI for Deleting Handling Units        
    BAPI_HU_DISPLAY_HISTORY        Displays HU History                     
    BAPI_HU_GETLIST                Read Handling Units from the Database   
    BAPI_HU_GET_LIST_MSG           Select Handling Unit Output             
    BAPI_HU_PACK                   BAPI for Packing an Item into an HU     
    BAPI_HU_PROCESS_MSG            HU Output Processing                    
    BAPI_HU_PROCESS_MSG_DIRECT     Select and Process Handling-Unit Outputs
    BAPI_HU_REPACK                 Repack HUs and HU Items                 
    BAPI_HU_UNPACK                 BAPI for Unpacking an Item from an HU   
    BOR_HU_DISPLAY                 Display an HU in Dialog Mode            
    ===================================

  • Root org. unit with External number range

    Hi all,
    I have a unique requirement.
    We need to create a root org. unit. I used PP0CE to do the same. But it would generate org. unit numbers internally i.e. system generated.
    We would like to assign an external number range to the root org. unit created.
    In case I try to create it using PP01, we have to provide a relationship to other org. unit while creating root org. unit in PP01.
    It would be great if someone can tell me the solution for this issue.
    Regards,
    Bharat

    Hi Bharat,
    You can maintain number range even for org units, as follows:
    Here
    01 - plan version
    A, C, O, P etc are object types
    after selecting the respective ie 01O IN Ex ,
    now click on maintain number range where you can clearly specify the number range either internal or external.
    Then u can start with TC PPOCE
    Thanks
    Sai

  • Serial number with external number range.

    Dear all
    pl how to configure the logice for serial number like gbrx123xeao120001here gbr is prefix code which is fixed x is model sufix,e is yaer of mfg 0001 is serialnumber. so now tell me how to generate the aboce said serial number when production order creation.
    pl tell me all config and related settings .
    thanks and regards
    Baswaraj

    Hi ,
    Please mainatain the external number range  for serial number management as
    from 01 to  999999999....... and AAAA.....to  ZZZZZZZZ.....
    While  doing goods movment you can use    user exit to  define serial number as per the customized calculations .
    Also you can create  seperate Zprogram  for goods movement  there  u can calculate for  Serial number and  pass it  to  goods movement BAPI  as  per your requirement .
    Hope this information helpful .
    Best regards ,
    Chithaanantham

  • Packing instructions - problem with external number range

    Hi Gurus:
    I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
    The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
    I appreciate your valuable input
    Tamas

    For further records:
    we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

  • Post depreciation with external number range assignement

    HI
    When i am running Depreciation  run AFAB, i am getting error"created doucment number range with internal assignement. 
    Currently the number range assigned for documents is external.
    Why this error is coming... please provide solution without changing number range to internal..
    Thanks and regards
    Ramarao.p

    HI
    see the SAP document .....
    Specify Document Type for Posting of Depreciation
    In this processing step you determine the document type for each company code for posting depreciation.
    Standard settings
    SAP supplies document type AF for depreciation posting.
    Requirements
    You must have defined the document number ranges.
    Activities
    1. Check the standard document type AF. If needed, define your own document type.
    2. Specify the document type for depreciation posting. The document type you select must meet the following conditions:
    It must be a document type for batch input.
    It must be defined with external document number assignment
    So please provide the solution ...with out changing internal number range...
    Thanks and regards
    Ramarao.p

  • Hi i want to ceate customer through bapi with external no range not implici

    hi i want to create customer through bapi which facilitates to enter customer code(our own defined not the sequentially next no.)
    i have gone through F.M BAPI_CUSTOMER_CREATEFROMDATA1 BUT NOT ABLE TO UNDERSTAND HOW TO INPUT PARAMETER FOR CUSTOMER_CODE.
    PLEASE GUIDE ME IF ANY ONE AWARE ABOUT THAT.
    THANKS
    Moderator message: please don't use all caps from now on.
    Edited by: Thomas Zloch on Aug 4, 2010 6:12 PM

    If the iTunes database files are on that drive, launch iTunes with the Shift key(Windows) or Option key(Mac OS X) held down, select Choose Library, and navigate to it. The computer may need to be authorized to play protected content, and if the library contains rented movies, those won't play.
    If not, import the content to an iTunes library.
    (100371)

  • External Number range for Production Order with additional logic

    Hi gurus,
    My requirement is -
    I have two products - for my Local and Export
    I have made two Order type for local and Export - say LOCL and EXPO
    My LOCL order no will start with L and EXPO with E
    I can do this with external number range set for each order type..
    Now my question is -
    My client wants Production Order in this fashion -
    L20111------
    L is local, 2011 is year, 1 is jan (1 to 9 - Jan to Sept, A - Oct, B- Nov, C - Dec) followed by a serial number
    How can we address this in SAP?
    Any clues?
    Thanks for your suggestion in advance.
    Regards,
    Srinivas

    Hai,
    You need to use User exit for this.  kindly contact your ABAP team.

  • How to assign numbers in external number range?

    Dear experts,
    Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
    So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
    Thanks in advance.
    Regards,
    Haris
    Edited by: harissahlan on Oct 19, 2011 5:44 AM

    With external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.

  • Depreciation external  number range

    Hi,
    I am having one doubt:
    the depreciation posting always happens with external document number range If the external no range tick is not clicked then the system should take the internal number range.
    But if the check is not ticked then the system is not taking internal number range although it is asking for the number range to be external.
    I just want to ask is there any other setting which defines that depreciation should be posted with external number range.
    Regards,
    Meenakshi

    In earlier version i.e prior to ecc 6.0 the asset depreciation document type number range was external. There is no special settings required , since it is standard procedure.
    However from ECC 6.00 you need not define the document type to be external.

  • EBP Invoice Use External Number Range is Possible?

    Hi Experts,
    I try to send SUS Invoice to EBP, but I found it seems impossible to create EBP Invoice with external number range. I have set external number range and assign to Invoice Transaction Type in SPRO. But it seems doesn't work.
    Is EBP invoice use external number range possible? Many thanks

    Hello Sudhir,
    This topic has been discussed many times at SDN forum, please search at SDN forum before you post your question !!
    Anyway i have included the below links for your easy referrence.
    [External number range for billing document (Invoices)|Re: External number range for billing document (Invoices)]
    [Billing document number range   |Re: Billing document number range]
    Regards,
    Sarthak

  • How to create a Sales Order with external number using BAPI

    Hi People,
    I am wonderning how to create Sales order using external number range by BAPI (SALESORDER_CREATEFROMDAT202).
    I tried search but could not succeed in finding the solution.
    Please share if anyone has some info.
    Thanks in advance.
    Regards,
    Praveen

    As per my understanding, the BAPI
    SALESORDER_CREATEFROMDAT202
    mentioned by you, is not BAPI. In fact, that is basic IDoc Type.  For processing an Inbound IDoc, we use FM IDOC_INPUT_ORDERS.
    If you want to create sales order other than IDoc, refer FM BAPI_SALESORDER_CREATEFROMDAT2. There you can provide external sales order no in SALESDOCUMENTIN. In addition to that check whether your sales doc type is relevant for external number range or not. If yes. then make sure you are providing external number according to the number range maintained.
    If you still have any concerns, please revert back.
    Thanks, JP

  • External number Range with leading zeros for Handling Units

    Hi Experts
        My requirement is to use the External number for the Handling Units provided by vendor.That number starts with 2digits"00"+18  for Example:00123456789123456789
      I am Using HU_VEKP Object for no range and maintaining
    External No Range From 00000000000900000000 to 00000000000999999999.
    But When i am giving Number 00000000000900000001 its only taking
    900000001.
    Kindly suggest me the right way to take leading zeros.
    Rewards for answer sure if it works.
    rajesh

    Hi Laksmipathi
                          I am maintaining the number range for External number range coz its vendor supplied HU.
               But the prefix zeros has meaning for identifying the Handling unit Functionality.In realtime IF prefix contains Say "0000" it refers to carton
    If prefix contains say "0010" it refers to pallet.
               So i need to satisfy there requirement.For example If it is for material number we can maintain In OMSL by check box of leading zeros.
                But i am not able to find any setting for this Handling units.U can check this object HU_VEKP in SNRO tcode where i am maintaining Number range.
    Thanks give suggestion
    RajeshS

Maybe you are looking for

  • Executing a java class in Integrator

    I have to execute a java class in Endeca Integrator. How must I go about doing this? Can i use the JavaExecute component? If yes, are there any examples of the syntax of this java class. The document states that the transformation attributes must imp

  • Incentives calculation in BEX

    Hi, Requirement as follows TARGET SALE SALE RETD NET SALE %OF ACHIEVEMENT RATE OF INCENTIVE Sale is a restricted Keyfigure which is defined as follows 0DOC_CATEG(Sales document category) restricted to Debit memo 0NETVAL_INV(Net value of billing item)

  • Where'd my MPEG-2 go?

    I recently updated to Tiger and had some issues that required me to re-install FCP 4. I then went to the apple site and upgraded to 4.5 which is what I had been using. Now, when I try to export I no longer have a MPEG-2 option. I tried exporting usin

  • Hiding some level of grouping when the custom field is empty at Project Center

    Hi: I group some custom fields at the Project Center (portfolio/programs/subprograms), but some on this are empty (see the image). I want to eliminate this fields (subprograms; subprogramas in the image), but next level (the projects) must continue t

  • Dear folks regarding ship to party

    While putting multiple ship-to party in a sales order at Header Data: following error message is coming. "Partner function WE can only occur 1 times in procedure