BAPIUSNAME Structure Problem on R/3 4.7, WAS 6.20

Hello guys,
As a part of my bachelor thesis I am consuming WS-enabled BAPIs and have encountered a problem on WAS 6.20 that has not appeared on any of the following versions of WAS:
When I try to retrieve the WSDL for BAPI_USER_GETLIST, I receive a time out error, which has not happened when invoking any other WS-enabled BAPI on the same system. And what I found, was that USERLIST table parameter of type BAPIUSNAME prevented the export of the BAPI as WS. The structure BAPIUSNAME is activated in the Dictionary.
That is why I created a structure ZBAPIUSNAME with exactly the same attributes, activated it and used it instead of BAPIUSNAME. Alas, the result was the same.
I would be very thankful, if somebody could give me a hint what is going wrong there.
Thanks.
Best wishes,
Petromil Petkov

Hi Achim,
Thanks for your reply. When I said ITS available with EP, I actually meant WAS 6.40 only. I think my words miss guided you. I do not have stand alone ITS installed in my landscape. Let me rephrase my question.
I have,
1) R/3 4.7 with WAS 6.20
2) EP 6 SP 15 with WAS 6.40(which has abap integrated ITS)
in my landscape.
I need to provide a R/3 transaction on EP using transaction iView. In order for transaction iView to work, is it possible to use the ITS integrated with WAS 6.40 to connect with R/3?
OR
I need to have a separate ITS installation and connection will be R/3 4.7 (WAS 6.20) -> ITS (stand alone) - WAS 6.40(integrated ITS) EP.
Hope I made my question clear.
Let me your response.

Similar Messages

IMac (March 2009) - Invalid Node Structure problem

Hi All
I was using my iMac as normal yesterday, when suddenly the system ground to a halt (something I never seen since using OS X). As I had work to do, after about an hour, I restarted, expecting it to be an app misbehaving or something straight forward, but on restart the same thing happened almost straight away.
So, I restarted again, only for the iMac to get stuck on the blue screen which follows the grey 'cog' screen. After looking through these discussions, and some other Mac forums, I booted from the installer disk, tried to run Disk Utility, which found issues and couldn't repair the disk.
I then tried Safe-User mode and fsck, which reported the aforementioned Invalid Node Structure problem. After checking a few more forums, I thought I would try to Erase the disk and reinstall Mac OS. I restored from my Time Machine backup, and finally got it to start, but the system moved at a snail's pace, and wouldn't open any apps or files.
I've tried again with fsck, and also fsck_hfs -r /dev/disk0s2 but all I get is the same error message:
disk0s2: I/O error.
Invalid Node Structure
(4, 38403)
** Volume check failed.
/dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
So, does anyone know if there is anything I can do to save the iMac? Or does it need a new HD? It is my primary work computer, so I really need to get it back, and after buying it in the UK, am now in France for 6 weeks, so it's difficult for me to take it to an Apple specialist.
Any help would be greatly appreciated, thanks in advance,
Daniel

As the last user stated, Disk Warrior maybe able to correct it, however if you search the net, you will see there are more than one user with this problem. I had the same problem, however, my machine is out of warranty, It started like you are saying, I RAN disk warrior which corrected the problem long enough to boot the system. In a matter of 10 minutes or so, the system started pausing (apps hung, but in a matter of seconds recovered). I was checking the disk with fsck_hfs and fsck while booted from a USB drive with a maintenance install of 10.5.6. After running fsck the 5th time with different options suggested from the internet, I rebooted with my disk warrior DVD only to find the drive NOT mounted, Drive utility see's it (even can attempt to run disk repair, but it locks up the system when trying this). Disk Warrior doesn't even see the disk to run a directory repair, although in the "check s.m.a.r.t status it sees it as a sata device, and SAYS ITS NORMAL).
Since my iMac was out of warranty, I followed the online instructions to replace the hard drive (not too difficult) and everything is fine now.
The old drive still wont mount, but another utility I bought (data rescue II) has been able to quick scan it and access all the data, even though it wont clear a fsck fsck_hfs or disk warrior, anyways, get it back while you can, IT IS THE hard drive itself, and lots of other iMac users online with the same issue (can you say WHY is my iMac SOOO HOT on the apple in the back (right where the drive is and not sufficient cooling in my opinion, but hey, some people might want to lay their computers face down and fry eggs on the it or something... ))
-SD

I was given a new phone because of a technical problem with my other. Everything was replaced because of iCloud but now it is telling me I do not have enough storage room on this phone to perform a back-up. Can I fix this?!

I was given a new phone because of a technical problem with my other. Everything was replaced because of iCloud but now it is telling me I do not have enough storage room on this phone to perform a back-up. Can I fix this?!

Why don't you call Apple tech support thru your provider. They will be able to help you in short order.
PS - If you want help here you need to provide a little more information i.e. how much memory does your iPhone -4- have and how much free memory do you have after restoring from the cloud?

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

HT203200 has anyone ever had this problem? seems to be a problem in itunes, as i am having no problems downloading other files."There was a problem downloading "Outlander / Howard McCain". An unknown error occurred (-50)."

has anyone ever had this problem? seems to be a problem in itunes, as i am having no problems downloading other files."There was a problem downloading “Outlander / Howard McCain”. An unknown error occurred (-50)."
kinda suck to pay for something you cant use!..

Try fixing up the validation issues...
http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.stereogol.com%2Faudi o%2Fwimpy_podcast.php
Not promising it will help, but it's worth a shot.

Problems printing a converted PDF which was converted to Word after completing the form

Problems printing a converted PDF which was converted to Word after completing the form. I have spent the last 3 hours trying to figure out what I am doing incorrectly. I can't get it to print in either the PDF or Word file. Please help, I need to complete this form and sent it NJ Department of Motor Vehicles Commission.

Hi, make sure you are using the latest release of PDF program.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

Hey NicolasZen,
Thanks for the question and welcome to the Apple Support Communities. I understand that you are experiencing issues with “No Service” or “Searching” on your iPhone. The following resource provides some great troubleshooting steps that you may wish to try:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Your iPhone may have one of these symptoms:
- iPhone displays "No Service" or "Searching" in an area of good coverage
- iPhone doesn't regain service when returning to an area of coverage
Resolution
If you encounter either of the above symptoms on your iPhone, follow these steps to attempt to resolve the issue. Test after each step.
1. Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
2. Turn iPhone off and then on again.
3. Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
4. Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
5. Update your iPhone to the latest version of iOS.
6. Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
7. Restore the iPhone.
Thanks,
Matt M.

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?

Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart.

Hello Mans and Womans! I live the problem to my iphone.While I was updating firmware update(my iphone is iphone 3G iOS 4.1.2) 4.2, the iphone gave an error(1015:error type).And now, the phone be rescue mode.I tried a lot of method, but ı didnt succesful

Hello Mans and Womans! I live the problem to my iphone.While I was updating firmware update(my iphone is iphone 3G iOS 4.1.2) 4.2, the iphone gave an error(1015:error type).And now, the phone be rescue mode.I tried a lot of method, but ı didnt succesful it.Please help mee!!

You can try putting the iPhone into DFU mode and see if that will let you restore and remove the jailbreak:
http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/
Some jailbreaks cannot be removed and in some cases will permanently disable your iPhone. If that happens to you, then you will have to buy a new iPhone; Apple will provide no support, warranty or out-of-warranty, for a jailbroken iPhone.
You're on your own from here. We can provide no further help with a jailbroken iPhone in these forums.
Good luck.

Problems with installation / de-installation of WAS AS 6.20

Problems with installation / de-installation of WAS AS 6.20
Hello,
is anyone able to help me ?
The installation (started from setup on cd-1 kernel) of sapdb ends by 30 % with following massage:
start massage:
Warning: adaextractlctool_nt_ada InternallnstallationDo
SAPCAR returns with error 29.
Error: adaextractlctool_nt_ada InternallnstallationDo
Phase failed.
Error: Main {}
Installation aborted.
end massage.
massage above percent-banner on the left down-side:
no R3SETUP connected.
In the dos-window in background have been a lot of status-lines during extraction of sabdb-files. Also there have been a successful-massage:
"installation of sap db server finished successfully...." l.
The massage above was shown direct after the massage: "Extracting SAP DB Tools Software"
The Loop-back adapter is already installed (was the first ein did) and the files in win-folder 'hosts' and 'service' are correct (IP and so on)
my system:
Acer Aspire 5100
Ram 1 GB
HD 160 GB (140 GB frei)
Win XP prof.
How can I solve the installationproblem ?
I think, I have to clean my system before starting a new installation-try, because there are already entries in my win-start-button:
a) SAP DB Manager (but behind only a html-Link / no entry DeInstall)
b) a second entry SAP Front End (also behind just a html-link / no deinstall-button)
Under system/controll panel -> software are no entries. So, I`m not able to deinstall the sapdb by win-controll-panel.
And what is with registry-entries ? How can I delete the right entries in the registry. I dont know how to find them.
Another way I tried: on the SAP-CD 1 (kernel) with the file resume_setup.bat I get the same abort during installation I described at the top.
Please, I need help, because I need the system as 6.20 for a trainning.
Much thanks,
Regards, Lars Stolpe
MfG Stolpe

obsolete question ...

I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

Reset the PRAM.
http://support.apple.com/kb/HT1379
If that fails, reset the PMU.
Scroll down the following page and click the G5 link for instructions:
http://support.apple.com/kb/ht1939

My children enters wrong password several times on problem my ipad ..., the was it is indicated that it was disabled ... how can i access my ipad thanks please help ... thank you

my children enters wrong password several times on problem my ipad ..., the was it is indicated that it was disabled ... how can i access my ipad thanks please help ... thank you

If it's reached the point where you can't try re-entering the code then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it - from http://support.apple.com/kb/HT1212
If you repeatedly enter the wrong passcode, your iPhone, iPad, or iPod touch will be disabled for longer intervals before you can try again. After too many unsuccessful attempts, you won't be able to try again until you connect it to the computer with which you last synced it.
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

TS1398 my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Query structure problem

Hi,
I need to create a query with a column structure described bellow:
Key figure .................|.. 0Quantity .....|.. 0Amount
Posting period ...........|.. # .................|.. Var1 (5,6, 7, ... 12)
The problem is that the column 0quantity should show only a figure for the entire year and the 0amount should show figures only for periods while the number of periods shown for 0amount is a variable range. 0amount should not show a figure for entire year (for #).
Creating two different queries does not seem like a solution as an expandable account hierarchy should be shown on the rows. The hierarchy should show the same view for both 0quantity and 0amount when a node is opened by user.
Any suggestions how to solve this?
Aino
Edited by: Aino Tuominen on Apr 2, 2008 11:36 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:37 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:46 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:47 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:48 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:49 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:52 AM

To see the periods for 0amount also 0quantity will have the periods shown as they are both in columns. This is not what I want. I only want to have period "#" shown for for 0quantity and periods "1-12" for 0amount. Even if I have restricted these they will be shown as both 0amount and 0quantity are in the same structure for columns.

Query structure problem (i think)

hi am trying to get selected strings out of a jlist
and concanate them into a query i dont have any
problems getting the strings out of the list and
into the query ,i think that my problem lies within
the structure of my query.i am trying to create a new
user for a database and set their privleges when i run
the program and create a new user every things fine as
long as the only value that i select from the
privilegs list is "ALL PRIVILEGES" or "CREATE" any ther values
and i get a connection failure to the MySQL server. could any one tell
me where i am going wrong or knows the structure of another query
that can do the same job???
cheers gerry
final String privilegetype[] = {"SELECT","INSERT","UPDATE","DELETE","CREATE"
,"DROP","ALL PRIVILEGES"};
String databasename[] = {"garage","music store",};
//the query where mk=the selected string from privilegetype,
mkk=the selected string from databasename,
name=new username,new String(pass)=the new user password
s.executeUpdate ("GRANT "+mk+" ON "+mkk+" TO "+name+" @"+host+"
IDENTIFIED BY '"+new String(pass)+"' WITH GRANT OPTION");

Output the actual query string and see if you can run it outside Java. If you cannot, then it's a database/SQL problem, not a Java problem. If you can, come back and post more details.

BAPIUSNAME Structure Problem on R/3 4.7, WAS 6.20

Similar Messages

Maybe you are looking for