Bar chart(Ghantt chart) for Plan and actual of production order

I want to know that any standard Ghantt chart (Bar chart) is available to view the plan and actual qty, execution start and finish time of production order.
In CO01/02/03 it shows only the planned execution time in Ghantt chart,but it doesnot show the actuals.

CM07 gives about the information of capacity allocation. It will not show the actual execution from date and to date.
I want to see the Planned from period to to-period and actual also in bar chart form.

Similar Messages

  • Is there standard report for planned and actual devlivery date?

    Hi Guru,
    Could you help me to find standard report to compare planned delivery date in PO and actual delivery date (GR Posting date)?
    I wonder, Is there standard report for planned and actual delivery date?
    or I have to create a customizing report.
    Thank you very much.

    hi
    i dont think it is possible to see both in one pan so try to create some Z report
    u try ME80fn here u have to change the views ,in del shedule view u can see the delivery dtae and in PO histry view u can see the posting date
    regards
    kunal

  • Best practice for Plan and actual data

    Hello, what is the best practice for Plan and actual data?  should they both be in the same app or different?
    Thanks.

    Hi Zack,
    It will be easier for you to maintain the data in a single application. Every application needs to have the category dimension, mandatorily. So, you can use this dimension to maintain the actual and plan data.
    Hope this helps.

  • Copc...Tcode CO02...Where the system pull the figure for plan and actual?

    Hi all,
    Inside CO02, i go to "go to" then go to "costs" then click on "analysis" one report will come out.
    Inside the report, can i know that how the figure in the report come out?
    Inside the report for column like plan cost and actual cost. Where the system pull the figure out?
    I know the system will pull the material cost out from MM and overhead from costing sheet. But what is the different between plan cost and actual cost? The figure the system pull out will put in plan cost or actual cost?
    Best regards,
    Lucas

    Yes it needs to be licensed
    Regards
    Rob
    http://oemgc.wordpress.com

  • Function module for calculating planned and actual cost of production order

    Hi ,
    Do we have any standard function module for calculating planned and actual cost for production order?
    i need to implement this in a Z-report.
    Thanks
    Srini

    Hi,
    try below function module
    CRMCO_GET_PLAN_ACTUAL_COSTS
    CO_IH_GET_PLANNED_COSTS_TOTAL
    Regards,
    Sankaran

  • How can i get difference in base plan and actual/current plan for a project

    Hi PS Experts,
    How can i get difference in base plan and actual plan .
    For example-
    Project1 is created for 10 days (start and end date difference).
    Now in between -project is extended/changed for 12 days .
    What is the way to get 2 days as a difference in base plan and current plan.
    Thanks
    Suraj prakash

    Hi Suraj,
    You can follow a convention that -
    (1) Forecast Start/Finish dates: Used only for Primary planning, once initial planning is done you should not change these dates.
    Now, you will copy the same dates in Basic Start/Finish dates also.
    (2) Basic Start/Finish dates: Whatever changes are done after the initial planning, you will make the changes only in Basic Start/Finish dates.
    So, in Project Planning board, if you enable Forecast and Basic dates with different color coding, you can clearly see the variation in the Project schedule.
    Hope this helps.

  • Planned and actual consumption for each confirmation

    Dear All,
    There is a production order. it has two operations. i have made three confirmations of each operation for that order. now i want to see the planned and actual consumption for each confirmation. how is it possible.
    However i know that on order we can see planned and actual consumption but it is for total order but i want to see planned and actual consumption for each confirmation. Actually client wants that on 2nd confirmation what is planned consumption and what they consumed on actual. thanks

    Hi,
            In standard SAP this type of report not be there, but u can make it by using BOM,Confirmation table, & material document table.
    Use AFRU to get posted document no for confirmation & detail by joining it with MSEG by mblnr & MAZHR.
    now u get plan component qty by using mast & stpo if ur bom not changed in Production order , if in order component may be change then use afko & resb table & by comparing base qty or order qty & confirmation qty get plan component qty for confirmation.
    Thanks
    Rakesh

  • Table for Production order planned and Actual cost

    Hi Experts,
    Can anybody please tell me the name of table where Production order planned and Actual cost gets saved ?
    Thanks in advance.
    Regards,
    Bijay

    Table COEP
    don't forget the points

  • How to differentiate b/w Plan and actual data

    Hi,
    How to differentiate b/w plan nad actual data.
    Is that value type or Version InfoObject??
    What should be the value for that and how it gets populated ??
    Regards,

    Hello Tapan,
    The plan and actual data is differentiated on the basis of value of infoobject 0VTYPE. Value 10 is for actual. Different plan versions can be differentiated by different values of infoobject 0VERSION.
    These values are populated when actual data is loaded or plan data is entered.
    Hope it helps.
    Regards,
    Praveen

  • Plan and Actual at WBS Elements without activities

    Hi Experts,
      I am in need of a small help from you. My scenario is like this:
    I have equipments/material as WBS Elements( Level1,2...). I have no activities/materials.
    I planned the costs using CJ40 and Budgeted using CJ30 and confirmed all the WBS Elements by entering actual dates for the same.
    Now i want to see planned/actuals costs in report. When i checked in one standard report it is showing 0 for both planned and actuals.
    I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement.
    Can anyone please help me in this regard.
    Thanks in advance.
    Regards,
    Suresh.D.

    The following is in answer to
    "I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement."
    Most probable scenario would consist of following steps
    Create PDef - Create WBS (either copying from template or manually) - Plan costs - Roll up planned costs - Budget (at top level) - Budget distribute - budget Release - WBS release - Post actual costs - run cost / revenue variance report - settle costs against the WBS - TECO project - Close Project.
    I believe I haven't missed on any important aspect.
    Would appreciate inputs from others in this effort.
    Hope this information was useful.
    Regards,
    Pradyumna

  • Planned and Actual costs at the Activity level

    Hi all,
          Can you tell me if there is a R/3 report which lists out the planned and actual costs for a project and displays it for each network and activity? I want these values at the activity level.
          I found a report which lists out these values for each network, but I cannot drilldown to the activity level. Please help.
    Thanks,
    Satyajit.

    Hi,
    There is setting in network type. Please go through transaction OPUV  i.e.
    Change view- Network type paramaeters : overview " Overview.
    Uner Network type parameters there is one radio button in front of ActvtyAcctAssgn. Just activate it.
    Hope this helps.
    Regards
    Tushar

  • How can i calculate my planned  and actual labour cost with fields from tab

    Hi,
       i want to calculate my planned labour cost for all operations in my production order. how can i retrive form the tables and how the actual planned cost gets calcualted. where can i see the overhed calcualtion of the material and labour.
    please suggest.
    regards
    madan

    Hi,
    Planned cost is nothing but the Standard values which you give for each opearation in the routing.
    The actual values from the confirmation for production order
    The following table and fields you can get the values
    PLPO, AFVC  - look for setup time,labor time,machine time  fields
    AFRU - look for the required fields setup,labor,mcahine time etc
    Thanks and regards
    Murugesa

  • Reg:Planned and Actual POC

    Hi,
    I have one requirement in progress analysis that system can find out the date wise planned and actual POC e.g:-
    A1 activity having ear start date -01.03.2011  fin date-  15.03.2011
    A1 Actual date-01.03.2011 to 03.03.2011 processing =30%
    But when i run CNE1 and putting To Period =march 2011 and then cne5 system is showing result month wise planned and actual poc.
    My requirement is to get planned POC  as per date .If i will select for 3 days then planned POC also comes for 3 days and not for 15 days(01-mar to 15-mar)
    We want to use progress analysis for activity date only
    Progress version-100     
    Planned  method- Time Proportionality.
    Actual Method-Degree of processing from confirmation
    So when we confirmed the activity 30% then in actual POC it is showing 30 and in plan also for 3days(01.03.2011 to 03.03.2011).
    With Regards
    Rohit Prakash

    Hi,
    Please read the following link
    <Link deleted by moderator>
    Hope this will help you
    BR
    Anjali
    Edited by: Virendra Pal on Mar 3, 2011 12:34 PM
    No spoon feeding please - Rohit should be able to search himself

  • Marketing Planning Planning and Actual Cost

    Hi
    We have a clinet requirement, where they want Marketing Planning functionality to be implemented. They want to use Budget Planning and Actual cost tracking functionality. Now as per my understanding we use SEM/BI for planning (Key Figure) and PS or COPA integration for Actual Cost Tracking.
    Is my understanding correct and what are the steps required for the two. Client has currently implemented SEM/BI and ECC, but PS is not in scope. So we will have to capture Actual Cost using COPA.
    Thanks & Regards
    Hits

    Hi Hitesh,
    The below link could answer your questions
    http://help.sap.com/saphelp_crm70/helpdata/EN/46/606830234f0db7e10000000a1553f6/frameset.htm
    Hope this helps,
    Regards,
    Naveen

  • Planned and Actual Labour hour

    Hi,
    Pl. let me know the table and field name for the following.
    1) Planned and delivered date for the production order.
    2) Planned and Actual labour hours for the production order.
    3) Work centre for the production order operation reference.
    Madhava

    Hi,
    Find the below related  tables
                         AUFK                    Production order headers
         AFIH                    Maintenance order header
         AUFM                    Goods movement for prod. order
         AFKO                    Order header data PP orders
         AFPO                    Order item
         RESB                    Order componenten     
           AFVC                    Order operations
         AFVV                    Quantities/dates/values in the operation
         AFVU                    User fields of the operation
         AFFL                    Work order sequence
         AFFH                    PRT assignment data for the work order(routing)
         JSTO                    Status profile
                          JEST                    Object status
         AFRU                    Order completion confirmations
    Regards
    SANIL

Maybe you are looking for

  • Background job is running for long tome in source system (ECC)

    Hi All, Background job is running for long tome in source system (ECC) while extracting data to PSA. I checked in ECC system SM66,SM50 the job is still running in SM37 the job is Active There are only maximum 7000 records the extractor is 2LIS_02_ITM

  • How do I enable the passbook app in ios 6.  Nothing happens when I click on it.

    how do I enable the passbook app in ios 6?  Nothing happens when I click on it.

  • Portal Installation advice

    Hi experts, We have a Business Intelligence (BW/BI) instance running, with also J2EE part installed. Now we would like to use the Web BEx , thus we first need to install the Enterprise Portal. My question is, what should be the preferable approach to

  • Ipccx installation related queries

    hi, I am currently studying installation and administration guide of ipccx. 1)During installation it asks for AXL user id and password. what will be the AXL user id.. do i have to configure it on application user (in usermanagement window) or its jus

  • External Drive's Privileges when moved to New Computer

    If I plug my external drive (that normally holds files I access from my desktop iMac) into my MacBook portable, even though the user sign-on name is the same, the external doesn't want to let me have access to my files that it holds. The desktop iMac