Bar code (escaping 3 label and printing 4th one)

Dear All,
i m printing bar-code from bar code printer (zebra)..problem is that printing is fine but is escaping 3 label then printing 4th one.can any tell me how to do page format so that it can't escape any label.Right noe i m using DINA4..plz suggest me..
Thanx

closed

Similar Messages

HT4061 Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please

Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please help

The IMEI number is stored in iTunes:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
I can't imagine that any police agency in the world would request this information.

Bar Code entry while trying to create one through FB03

Hi Guru
We recently had techical upgrade to ECC6.0. While trying to create a barcode entry for a document through FB03 I am getting the following error message
oa280 - Bar code not active -system administration .
All the configuration are in place in OAC5,OBD2 . I couldnt able to find any relevant notes regarding to this issue . Can some one help me out in fixing this issue
Thanks
Auroar

Hi
I raised the question to SAP and they provided me the notes 173521 as suggested by you . But following this note will open bar code entry access for all user and for all accounting document which will be an issue . After few trial and error I was able to get an solution for this issue . I created an entry in oac5 with barcode active for object type and user specified and an another entry with barcode inactive for object type ,document type FIIInvoice and user . This enabled only the authorized user for bar code entry to make changes . One drawback is that it does allow permitted user for all document type
Thanks all for your suggestion
Regards
auroar

In pages, when a create a document, potions of it, say several pages will be clumped together and it effects me editing their order. It is like they are forever joined- How do I edit my document and print just one page or move just one page?

In pages, when a create a document, potions of it, say several pages will be clumped together and it effects me editing their order. It is like they are forever joined- How do I edit my document and print just one page or move just one page?

May you open your eyes before creating a new thread ?
Your question was already asked and answered today.
https://discussions.apple.com/thread/3177074?tstart=0
Yvan KOENIG (VALLAURIS, France) jeudi 14 juillet 2011 14:40:40
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How do I print all responses as pdf without selecting and printing just one response at a time?

How do I print all responses as pdf forms without selecting and printing just one response at a time?

Sorry this is not supported at this time. You can only download the responses as PDF one at a time.
You can export the response table and print the whole table but if you want to print each response individually you have to do it manually. Sorry.
Gen

Why can´t I take a step back with the keyboard shortcut, cmd + ö, it was possible before, now you have to go to the bar at the top and "go back one step." I ha

Why can´t I take a step back with the keyboard shortcut, cmd + ö, it was possible before, now you have to go to the bar at the top and "go back one step." I have Mac-systems, I also have mouse elbow, and do not want to use the mouse too often.

This article lists some other options for "Back" navigation. Do any of them work for you?
[[Keyboard shortcuts - Perform common Firefox tasks quickly]]
Note: if you are not shown Mac keyboard combinations in knowledge base articles, scroll down a bit and look for something like this in the right column:
''Article is for:''<br>
+ Windows<br>
+ Firefox 14
Click Windows to change to your OS.

I want to make address labels and print them out. Does anybody know of a word processing program for Mac that would do this?

I want to make address labels and print them out. Does anybody know of a word processing program for Mac to accomplish this?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

New owner here. How can I select specific pages of a document found on line and print just those pages. What I see is the ability to select only 1 page at a time and print that one selected page only. Thanks much.

New owner here. I see that in printing I can select one page and print same. How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time. Thanks much

Just change the range as illustrated below. If you don't see that, click the Show Details button.

Use of Bar Codes in reports and fonts

Hi,
I've copied Word fonts for the bar codes in the folder "Windows font "on mi pc. Then I opened a DESKI report and I used the same font in the report. I must repeat the same operation on all pc's in the company and on the Application Server where is located the CMC?
Thanks in advance and best regards,
Andrea Cozzani

Hi Edmar
I think the solution is for every user who is seeing the Reports PDF output in the browser, to have the relevent font in Acrobat. We have introduced Single Byte Type 1 Font Embedding and True Type font subsetting features in Reports 9i and if the resultant pdf output has any of these font types, you can use these features. In this case, user does not need to have the Font installed.
Also In Reports 9i, you can create a bar code font report using Barcode bean. Please have a look at
http://otn.oracle.com/products/reports/htdocs/getstart/examples/index.html
for more detail.
Thanks
The Oracle Reports Team

Advice on DVD labels and printing

After looking at various posts, I've decided to get a printer that prints directly on DVDs.
Currently looking at Epson R220 (£55), R300 (£80), R340 (£117)
I don't really need the card reader or screen capablity. Is the R220 otherwise the same spec and quality?
Also looking at SmileOnMyMac's 'Disc Label' software?
Any thoughts?
Thanks,
Sam

I have an Epson R300 that I use and a R200 hooked to the PC my wife uses. Printing itself on disks works fine on the R300 although I have had minor problems with the disk tray. The printer comes with a program for creating and printing on the disks that is easy to use. Have not done any disk printing on the R200 although it is great at printing photos as is the R300. The card reader on the 300 has come in very handy for reading both cards from my digital camera as well as my palm organizer.
Hope this helps.
BF

Labels and Printed paper misalignment

Officejet 6500 unable to print avery labels and when using paper with boarders or prints everything misaligns, I have yet to find anything to fix this problem. I have windows vista and office 2007, if you can help, yes please

I wonder if the driver is having a conflict with the Office 2007 software. Try using an alternate print driver to print. I'll link the instructions below. Let me know what happens.
How to Assign Alternate Print Drivers in Different Versions of Windows
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to print BAR code in SMART Form

Hi All,
I have the requirement to print BAR CODE in Smartforms.
For this, I create a character format with Bar code in style forms and create a text element in Smart form and associate bar code character format with this text element.
Now when I look the print preview for the data, then it shows me data in bar code format but not in right format i.e. its shows me all the similar block in bar code.
If you look the bar code in SAP script, its always show you bar code with similar block, but in SMART FORM it will show you exact bar code; as in SAP Script, bar code is generated at printer end and in SMARTFORM bar code is generated as graphic in SAP and then sent to printer for print.
PLease let me know, why in SMARTFORM its not showing BAR CODE in correct format in print preview.
Thanks
Piyush Mathur

Hi,
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
reward if useful
regards,
ANJI

Printing bar code to LOCL printer

I have created a smartform to print a bar code using bar code BC_CD39. I call the smartform function in an ABAP program and then display it in PDF form using function:
call function 'SSFCOMP_PDF_PREVIEW'
     EXPORTING
          i_otf                    = otfdata
     EXCEPTIONS
          convert_otf_to_pdf_error = 1
          cntl_error               = 2
          others                   = 3.
The bar code does show on the PDF, but it is just showing as repeating bars of the same size. Like this:
And when I print to LOCL printer, it prints out the same. Why is it not printing/displaying the true bar code?

Hi
Which printer are you using? To print the Barcodes you need a separate Barcode printer see the following
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
Regards
Anji

To implement bar code in print out of form script

hi
can any one tell me steps to implement the bar code for a field in sap script layout
what code should is put and process step by step
quick answeres will be rewarded with points kindly let me know asap
regards
Arora

first u need to create a bar code charcter format and then user the charcter format which field u want to use it to.
make sure that u printer supports barcode printing.
if ur printer is a Zebra printer then u need to write the code in in zebra printing code.
Regards
Devanand

To print 3 different bar codes on the same page in SMARTFORMS

Hi,
I want to print three different bar codes (HU) per page instead of one in Smartforms. I need to change the print program but I don't know where?
can you help me plz

Hi,
To display Bar Codes in smartforms you need to create charecter format in smartsyles:
Example :
Charecter Format :BC
Description : Bar Code
Bar code Name : C128A
And next insert two text node in the tempalte
1. &value1& type BC for dispalying barcode lines
2. &value1& type any for dispalying values for the barcode.
This way you can display the values in form of barcodes.
Regards,
Dep

Bar code (escaping 3 label and printing 4th one)

Similar Messages

Maybe you are looking for