Bar code in LIV

Hi,
What is the relavance / significance of bar code entry in Logistics invoice verification.
What are the basic configurations needed for this.
Thanks,
Regards
Raghavendra

Hi,
In order to get the barcode printed, the barcode printer has to be present.
If the barcode printer is not set up then atleast the printer you arer using should have the recommended drivers installed in tit in order to enable the barcode printing.
In the print preview you can able to see the barcode as it just shows the normal bars not the ones with the exact precission.
Even the barcode printer is present, u need to configure the output type in SAP and has to make some specific settings.
Cheers,
Simha.

Similar Messages

Bar Code works fine in one App Svr, but does NOT work in identical server?

We use the FREE3OF9.TTF bar-code to generate bar codes. We tested on this http://www.freeimagehosting.net/uploads/7c901bc198.gif development environment and it works fine.
Problem is, when we install the font and report in the live environment, which is IDENTICAL to the above dev. environment the bar-code does not appear. Only the number appears.
If you change another font in the report and deploy, the report shows the new font in the live env., but only the bar-code font it does not pick up.
I even tried font sub-setting in the app server but even that failed.
In the app server the bar code is displayed if you use it in Wordpad.
Problem is the App Server does not pick up ONLY the bar-code font (all other fonts it picks up)?
What could be the issue?

Hello
have you rebooted the Windows server ?
by default , the Reports Server is running as a Windows Service and Windows Services inherit resources defined at the boot.
Regards

What is the best bar-code app

what is the best bar-code scanning app?

ohjay,
First I am going to criticize the general practice on this forum of not posting one's "Location" and "Carrier". This information is important to almost any question that can be asked about an iPhone !!!
That said; Give "Redlaser Bar Code and QR code scanner" a try. I believe e-Bay bought out the company that started it and is now the application owner/manufacturer.
It will do bar codes and "QR" codes, kind of an all in one scanner and it is free. But like I said it depends a lot on were you live as to how well any scanner is going to perform searches and such in your location.
PS - Just download all the free ones until you find one you like the best. Free is good and their are a gazillion free ones (well maybe not that many but a lot ).

Why does the bar code look "chubby" when I save to PDF?

Hi, I'm designing a book cover for a client in Illustrator, and it has a bar code on the back of it. When I save the file as an .ai or a .png or .jpeg, it appears fine. But when I save the file as a .pdf (which my client will be viewing, and for print), the bar code looks like the lines have gotten bigger or run together! It's really weird...no matter which preset I use, it appears like this (I've attached a screenshot). I've also tried the "flatten transparency" and converting the numbers to outlines, but they still tend to distort when the pdf is viewed.
Any suggestions on how to fix this, or why this might be happening? It scares the client when they see it....
The lines in the picture are MUCH thicker than the actual bar code, and some appear to have blended together.

Hi Mike,
In the Preferences area of Adobe Reader, go to the Page Display tab, and
make sure that "Enhance thin lines" is unchecked. That seemed to solve
most of my problems with the type! Hope that works for you too!
Laci Morgan

Bar Code Scanning for Windows Phone 8.1

Hi,
I need to find proper way how to scan bar codes in Windows Phone 8.1 or in universal app. I found out that there is native class BarcodeScanner available only for client apps and not for WP. I also find 3rd party library zxing.net, which is not working very
well on WP 8.1. I have done really deep research, but I have not found any single working solution for WP 8.1, so I would like to ask for your help in finding of library with which I will be able to scan barcodes on WP 8.1.
Thank you.

If you don't need a universal App you could build a Silverlight 8.1 App and use the old Camera APIs which work nicely with ZXing.Net. I have done so myself.
As for Windows 8 and Universal Apps - you would have to implement a CustomSink for the Video Stream, extract Frames from there and pipe those though a recognition library. So far there seems to be no ready made solution that offers this.
So right now using the old APIs would be my suggestion.

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Help! Generating paper report with Bar code for web

Now I am using Oracle 9i AS Release 2 + Report 9i and I try to run the demo paper report "ShippingManifest.rdf" which includes Bar Code inside. But I cannot launch the report successfully. The problem seems the report service cannot call build in package ORA_JAVA. Btw, with the same report, I can run this report on the report bulider without any problem on the same machine.
Actaully, can I launch this demo report from web? If so, how can I includes classpath for the bulid in package?
or I must use JSP report instead?
Thanks & Regards
Louis Lei

tnx. i resolved the problem.
now i have anoyher one:
my report has a CF formula --- OLE2--- some file.doc (Word) (one page :))
in reports 6i it works just fine...
but in oracle apps i can only see the header and not the word doc....
i tried to convert the doc to pdf (because i have pdf as output for my report...) but i still have the same problem....
the word doc is a paramater :p_link : d:\scan\pag1.doc
what should i do to see this in application....
???

Bar Code in ALV report

Hello,
Is it possible to print Barcode(for Work order) in ALV report...

Hi Perumal
In ALV there wont be any need for bar code, bcoz barcodes are only printing purpose.
barcode can be displayed using sapscript in reports.
regards
kishore

PDF report with bar code

Hello.
I am creating a PDF report using the Oracle Reports 6i running on Oracle Concurrent Manager.
The PDF report has a bar code.
The report finish with success but it is visualized without the bar code.
Into the output report the bar code name is small font (mw6code39mt) always.
I can visualize the output report when I manually alter the bar code name from small font to large font (MW6 Code39MT) only. I do it in my Unix server using the text editor.
The bar code name installed in my PC is large font (MW6 Code39MT)
I am experiencing problem when visualizing or printing the output report.
Has somebody experience about it or some idea about how can I to configure the Unix server or Oracle to solve the problem?
Thank you.
Edson

Hi Julie,
Sorry my english.
I will try to explain in more details the problem.
I have identified that the bar code name into the PDF output is lowercase (mw6code39mt).
I only visualize or print the PDF output with the bar code when I manually alter that bar code name from lowercase to uppercase (MW6Code39MT).
I do that in my Unix server using the vi editor.
Please, see what I need to alter in the PDF output file on Unix server:
<</Type /Font
/Name /F1
/Subtype /Type1
/Encoding /WinAnsiEncoding
/BaseFont /mw6code39mt ====> alter to MW6Code39MT
/FirstChar 24
/LastChar 255
/Widths 9 0 R
/FontDescriptor 10 0 R
>>
endobj
Thank you.
Edson

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

What do you mean by dynamically? When yo set up a 2D bar code field you specify which field name/value pairs you want to include, along with other parameters. But be aware that they won't work with Reader unless you Reader-enable the document with LiveCycle Reader Extensions and include the bar code usage right. It will work with Acrobat Standard/Pro.

Problems on scanning BAR CODES

Hi people!
I have to print bar codes from an abap report and then scan. I've done the first part (printing) but I just can't scan the code I print. Does someone have an idea?
Thanks,
Rodrigo.

Hi Rodrigo,
Didn't know you could produce Barcodes from ABAP reports - how did you do this? As Christian said, you could also make the font bigger. What are the barcode specs? Sometimes, you need to have the ratios between the "thin" and "thick" lines set up based onthe type of scanner you use. You can manipulate these settings through the Bar Code Settings via SE73.
This is how you can do it. Let's assume you are using a HP1200 Device Type and a Code 128A Barcode Font. From SE73, click on the "Printer Bar Codes" Radio button and select Display.
Double Click on the HP1200 Device Type and you will see all the Bar Codes that have been set up for that Device Type. Find "C128A_00" and single click on the Prefix 'SBP25' and hit the "Displ. Print Control" button.
This Prefix is the external printer control command that SAP will pass to the printer in the printer's language. Once you hit the "Disp. Print Control" button a popup will appear, now look at the Control Char. Seq. This is the printer command for this particular Barcode font. All the characteristics relating to Barcode Font, Size, Height, Spacing, Ratios, etc are defined here.
Because these commands are in the Printer's Native Language, you will need to get the relevant programming guide for your printer to know what values to manipulate.
Let me know if you need more info.
Cheers,
Pat.
P.S. Kindly aloocate Reward Points as appropriate.

Use abap report program to print bar code instead of smartforms

Do anyone know how to use abap report program to print bar code?

Hi Celina,
http://searchsap.techtarget.com/tip/1,289483,sid21_gci839063,00.html
I hope this will help, also it depends on the barcode type like ARTNR-code 128...
Regards,
Sudhi

How to add bar code in report(se38 develop)

hi all,
as a existing abap report which print out the report with a lot of special logic, so i want Use abap report program to print bar code instead of smartforms . how to process?
thanks.
james

Hi Kumar,
You cannot write custom code (0% coding) in an Report Writer/Painter report. The code is generated by SAP while generating the Report group. The only place in a report writer report where you can write very minimal code is at varables level or formulas inside reports.
At the report group header level, there is provision to provide authorization group. Try that.
Regards,
Subin John.
Edited by: subin john on Mar 24, 2011 10:36 AM

Bar code not scanned by scanner machine.

Hello!
Problem is there after print the report, bar code is not scanned by scanner.
Thank You.

Hi,
Do you use crystal report or standard Print Layout?
if you use Crystal Report, Normally we use font "Code39"
Try this:
Add asterick ( * ) between the text you want to scan.
e.g.
asterickDOCNO123456asterick
asterick is the symbol with no space in between.
and change the whole string font to Code39
nd.Q
Edited by: Andy Quipit Sayus on Aug 9, 2011 12:44 PM
Edited by: Andy Quipit Sayus on Aug 9, 2011 12:45 PM

How to Print Bar codes in SAP script.

Hi Experts,
Could you please tell me how to print bar codes through sapscript (the steps basically)?
<<text removed by moderator>>
Thanks in advance,
Suchi.
Edited by: Matt on Nov 13, 2008 2:04 PM - do not use ASAP or urgent.

hi,
check these.
[https://forums.sdn.sap.com/click.jspa?searchID=18572128&messageID=4724540]
[http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]

Bar code in LIV

Similar Messages

Maybe you are looking for