Bar code reader will not scan !

Have tried all forms of lighting and angles. No luck. Help.

hi mate, does the camera on your device allow you to auto-focus when you take photos? else check that you are up to date with the latest firmware on your device, and check that you are up to date with the latest Nokia system app updates from the Store. failing that, try performing a soft reset.

Similar Messages

New color laserjet pro mfp m177 will not scan or copy

Product is new. The problem is that this unit will not scan or copy. I downloaded the latest drivers, but they would not install completely. I also ran thru some trouble shooting guides on the HP website, but still it doesn't work. It tries to make a copy, but it acts like it starts and then stops without completing the function. It's almost like the scanner mechanism is stuck. Anyone ever have this problem with a brand new printer?

Hello , Thanks for posting in the HP Forums, and welcome! I understand you are unable to make a copy or scan on your new HP Color LaserJet Pro M177fw MFP. I'd like to help you with this. Firstly, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers. If the issue persists, I would suggest download and installing the most recent firmware for your unit. You can download the firmware update utility here:HP Color LaserJet Pro MFP M177fw Firmware UpdateNote: You will need to connect the printer via USB to update the firmware, as any interruption during the firmware update can cause more issues. If this still does not resolve the issue, please let me know if you are getting some sort of error message on the screen or any blinking lights to indicate what the problem may be. Hope this helps!

TS1292 how to activat a itunes code that will not redem

how to activat a itunes code that will not redem

I was having the same problem with a card that I received as a gift. Finally, I realized that it's an APPLE gift card and not an iTunes gift card. They are different and one will not work for another. The Apple card is used for hardware, software, cases, headphones, etc that you can buy in store or online. The iTunes card can only be used for music, apps, videos purchased through iTunes.
But as long as it is in fact an iTunes card, the only other thing I've read about it not activating is to wait a few days and try it again. Sometimes it takes a while for the store where it was purchased from to send the activation info to Apple and read it as a valid code. I guess it doesn't happen instantaneously when scanned at the store.

Bar-code reader for "numbers"?

Hi there, is there a bar-code Reader that works with "numbers"? I would like to scan products for price comparison while I'm shopping for my business.

If the bar-code reader can be recognized as an auxiliary keyboard input, as I believe most can, and if it issues a return character after each scan is transmitted, it will create a column of readings in a Numbers table.
I don't think it needs to do anything special to work with Numbers, unless you have some higher expectations beyond creating a column of data.
Jerry

HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

I have installed the updates for my HP Photosmart All-in-One c309a. It prints, but will not scan. Tells me to update - I did that, but still won't scan. Any suggestions to make the scanner work?
This all worked perfectly with my old 2008 MacBook Pro.

Have you tried scanning from Image Capture or Preview?
A current driver is shown to be available for Mavericks (auto-downloaded):
http://support.apple.com/kb/ht3669#HP
But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

My hp office jet printer will not scan a document wirelessly print works fine on wireless any thoughts on this problem

my hp printer will not scan a document wirelessly the wireless print funtion works fine i have to plug the usb cable into the laptop to scan a document any thoughts on how to do this wirelessly thanks

i have to plug the usb cable into the laptop to scan a document
This is because HP has not provided network USB drivers to allow scanning when the all-in-one is connected to the USB port on the AirPort Extreme.
HP has only provided drivers to allow printing when the all-in-one is connected to the USB port on the AirPort Extreme. To be fair, other manufacturers who offer all-in-one products do the same thing.
If you need to scan documents, you will need to connect the all-in-one to the USB port on your computer....until HP offers full featured network USB drivers. Check with HP Support for possible progress in this regard.
If your all-in-one happens to offer wireless connection options or wired Ethernet options to connect to your network, you should have full functionality that way.

Canon MX870 will print wirelessly but will not scan and can't launch EX navigator

My laptop recently crapped out on me the hard drive failed. It's an old Macbook pro vintage with 4gig memory and running OS X maverics. After I got a new hard drive put in and restored my computer using a time machine backup I noticed the Tech had gone ahead and installed a newer operating system 10.9.2 and now I cannot get my Canon pixma MX870's software to work. After going to the Canon site and downloading newer drivers and wrangling with it for three hours I finally was able to get it to print wirelessly somehow, don't ask me how. But it will print wireless however it still will not scan even if I use image capture it sees no printer available and the ex navigator software keeps showing an error message it cannot launch! How bogus! Macs have always just worked period. No problem but now even when I go back to my old install disc for the Canon pixma MX870 it says that the software is not supported by this operating system .....REALLY... this printer is only about three years old! I'm shocked that apple could actually go ahead and make new versions of maverics that don't support printer software from two years ago..... REALLY you're kidding right! Whats next you won't support software from two months ago! I guess we have to just buy a new printer every month.
This machine is starting to remind me of a Windows laptop what a nightmare. Jobs must be rolling in his grave. This is just utterly pathetic. This is the beginning of the end for Apple. I've always been impressed with how easy it is to use apple stuff but this is the second time I've updated my operating system only to find I have to go through **** just to get the freakin' printer to work. Come on guys somebody show me an easy fix here and if any body says it's the printer companies responsibility to update their drivers and software I think I'm going to puke. I have already downloaded the newest Canon software for the MX870 and it can't launch I was able to get the printer to print but can't get the scanner to work and the solutions menu is now useless.

Well you are right Steve my complaint is with Canon for not making it easier to install their necessary updates if you upgrade your OS system but it seems that when Apple is constantly making new upgrades available they might want to add in the heads up "OH by the way, if you install this new OS it's likely your printer won't work any more if it's more than three years old." along side the constant "Updates are available for your computer" they should really have it read "Updates are available for your computer, proceed at your own risk" No I'm sorry the whole system is geared towards making people get so frustrated that they eventually give up and buy a new printer. I'm not sure what 5 hours of my time is worth but I am sure that if were getting paid by the hour it would be enough to buy a new Canon comparable to the MX870. So by the way if other people are having this same problem, which of course thousands of them are, the solution is first download the newer driver, then download the new wireless setup assistant and then figure out how to use it (good luck with that), it took me about two hours just to find the access points on the printer and to be honest I just got lucky eventually. Then you must download the newer "Scan Gear" software if you want to scan. But it seems that the new "Scan Gear" software got my whole solutions menu to start working again so there you go, you can be a white night for somebody else who is having this same problem. I must admit that after wrangling for hours I continued to go back to the forums and eventually found a link to the canon software update page provide by some very nice girl who was very helpful for some other guy and the link took me to the same page I had been to several times already but I then downloaded the "Scan Gear" software and was up and running again. So thank you to that nice girl and in the spirit of her helpfulness I offer this to the thousands of other poor bastards that cannot get their MX870 to scan
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_s eries/pixma_mx870#DriversAndSoftware
Go there and download the "Scan Gear" software that is for OS 10.9

OS 10.6.8 and Canon printer. Prints wireless but will not scan wireless.

Just bought a Canon MX890 multifunction. OS 10.6.8. Used Canon support to help me set up wireless and I can print wireless but it will not scan wireless. Error message reads: "Cannot communicate with scanner for these reasons: Scanner is turned off or USB cable is disconnected." Any suggestions?

Sounds like you are trying to use Canon's MP Navigator application. To get this to work via wireless, you first need to open Canon IJ Network Selector which is located in Applications > Canon Utilities. With this application open it should show you the MX890 on the network. Select it and OK the change.
Next step is to open the MP Navigator application and click on the Preferences button. Then from the General tab you need to ensure the Canon MX890 Network is set.
With these two actions completed you should be able to scan with MP Navigator.
Or as Carolyn has instructed, you can use Image Capture which is included with OS X to scan from the MX890.

Adobe Reader will not save or show the Save dialog

Hello, we use adobe reader a lot where I work, mostly with filling out pre-made "Form" type PDF's and saving them in customer folders on the server, as of last friday my adobe reader will not allow me to save pdf's, I have attempted to edit and save, edit and save-as, I tried simply saving as without making any edits. I also tried to open a PDF online (specifically http://www.ncu.edu.tw/~ncu25352/Uploads/201312311030531151830864.pdf ), tested that PDF on another PC and it would allow me to save it.
I uninstalled Adobe reader 11 and reinstalled from the website ( get.adobe.com/reader ), I then uninstalled anything on the pc that relates to PDF's that I could find (which was just reader and a dictionary add-in for reader 9) and attempted to reinstall without any change in the problem.
To recap, PDF's will not save, and when I click save-as no save dialog pops up, I cannot save via the IE add-in either.
Any help would be greatly appreciated by both my boss and myself!

You mention IE, so I assume that you are on Windows.
How are you trying to save that PDF, using the IE menu bar File Save as, or the floating toolbar in the Adobe Reader plugin?

Bar Code Reading in ABAP, through handheld scanner or say Barcode Reader

HI,
I want to scan the bar code label through the bar code reader, and get the bar code
no in sap abap.
Please let me know what settings and coding needs to be done to get the bar code
no that is scanned.
PLease let me know how i should go about it

Hi Niranjan,
There are a couple of third-party tools which can directly read the data from the barcode and you can use it in the ABAP program.
Alternatively create a dialog screen. USe the barcode scanner and get the data as an input parameter and based on the input parameter do what ever validation you require and then based on the output of the validation trigger your relevant processing.
Cheers
VJ

HT4623 icant get ipod touch to turn on. the picture says to connect to itunes. when i connect to computer it says to enter pass code but will not gog to screen to enter code.help please

i can not get ipod touch to turn on. it shows picture to connect to itunes but it says to enter pass code but will not gogto screen to enter code. HELP PLEASE

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

My OfficeJet 6110 will print (with errors) with Yosemite but will not scan

I just finished reading this entire thread:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Mac-OS-10-10-Yosemite-and-HP-Printer-Support/...
I have rebooted the computer; repaired disk permissions; deleted and added the 6110 back; dowloaded the HP printer drivers and manually installed them; deleted printer and reinstalled printer drivers; repaired permissions again.
Almost everytime I print, the printer does not actuate and I get an "inkjet error." Then I just print again and it works fine. However, it will not scan and although it shows up in SystemPreferencec>Printers and Scanners, it does not show up in Image Capture or Preview>Import from Scanner.
I also have an Epson GT-S50 scanner. It scans perfectly without any problem.
I just changed machines to a new iMac from my earlier Mac Pro. The 6110 worked fine with the Mac Pro running Mavericks.
Here's the kicker: Although the scanner does not show up under ImageCapture or Preview or when R-clicking the installed printer window, it seems to work fine with the scanning software named VueScan. Under VueScan it shows up as an OfficeJet 6105 but seems to work ok.
I want to use the native scanning software, however.
I don't know what to do next.
iMac Retina 5K running 10.10.1, 32GB RAM
Thanks Stan

Hello @snsokstan,
Thank you for visiting the HP Support Forums! I understand you are running into some problems trying to install your HP Officejet 6110 to your Mac running the new Yosemite 10.10 Operating system.
I see you have tried all the recommendations to install the printer with no success. After taking a look at the supported printers list on the Apple Site, your printer is not supported. This is why you are running into problems with the printing and scanning.
I suggest contact our technical support at 800-474-6836 to see what upgrade options they may have available to you. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

The address bar in firefox will not let me use down arrow in menu boxes on any website or in the url bar

The address bar in firefox will not let me use down arrow in menu boxes or in the url bar. Usually if I click on the down arrow in the url bar, my most common websites pop up... now it won't show me them...
It is also happening in any website I use via Fire fox. I don't have this problem with windows or Internet Explorer. Even the down arrow box below this.. asking "this happened" won't let me see the choices.. it just flashes by.

Make sure that the Location Bar is not set to "Nothing": Tools > Options > Privacy > Location Bar: When using the location bar, suggest: History,Bookmarks,History and Bookmarks
See [[Smart Location Bar]]

Bar code reading

Hi All,
In production we are using the Bar code reader before consume the components for production of assembly.
while the time of assembly backflusing, the component get GI (consumped asper sap)
but our client need that while do the scanning of the bar code of the components by Bar code reader, system need to do the GI.
component backflush. so how we can use the bar code reader to do backflush automatically.

Hi Raj,
write a program to use MIGO by providing data read by BAR code reader.
what kind of scanner you are using......?
If the scanner is one of the non-programmable types.
Write a small VB or C program that has just the required fields on the screen. Use the scanner to populate those fields and when the last field has been scanned, either the program itself automatically calls the relevant BAPI or the user clicks an 'OK' button which then calls the relevant BAPI.
In either case the return from the BAPI should be displayed so the user knows whether to rescan or continue with the next goods movement.
one more things , is this post is extended issue of your post for peridocal backflush or its different issue.....?
if its extended one, please close the earlier one.
Check it out and revert back.
Regards
Ritesh

How to developed QR and bar code reader app with Win8 tablet?

I want to know the best approach of developing QR and bar code reader app with Win8 tablet?
Please suggest any third party or native c# which could be help for me.
shishir

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Bar code reader will not scan !

Similar Messages

Maybe you are looking for