Bar codes (Smartforms vs. Sapscript)

Hello,
I need to print sapscript bar code on every kind of printers, is it possible in sapscript? I found out solution only for certain printer. I know I can do this in smartform, but there is completed sapscript form and customer requests upgrade this sapscript form with bar code. Sapscript migration to smartform is too expensive (print program has 4 000 lines of code).
Why smartform can print bar code on every printer and sapscript not? Does smartform convert print code to picture or what? Does anybody know how to convert bar code into picture in sapscript?
Best regards,
Josef Motl

Sapsctipt can not convert bar code to pdf. The implementation of bar codes in sapscript seems to cause too much difficulty to SAP developpers and they tend to put their efforts into smart forms.
Look at the following notes for the idea
https://service.sap.com/sap/support/notes/430887PDF conversion: bar codes are not supported
we asked for help in Sapscropt and their only answer was https://service.sap.com/sap/support/notes/706743 Corrections for New Barcode Technology for Smart Forms
Regards.

Similar Messages

Bar Codes printing in SAPscript form

Hello everyone,
Please help me with barcodes printing problem:
We are using ECC 6.0, and printer HPLJ 2300 series PCL 6
I have installed BARCODE.DLL, and it is located in my local PC, in folder SAPgui\SAPlpd, i.e. where SAPlpd.exe file is locating.
I printed assets bar code labels using tc S_ALR_87010137, and using script form FIAA_0003, but in print preview there were just solid boxes and after print-out there were no boxes at all, just text! Then I created new script form and assigned new barcode type, but printed barcodes were still invisible on the paper list.
Where is the problem?

Just do the following check items-
1) try to print any standard form ( PO, SO etc.) from SAP printer but not through local printer. ( Spool should not be generated; check it in sp02.)
2) If it printed perfectly, then it is supposed to print the barcode too. You cannot print the barcodes using the local printers. Usually it required special printers
( zebra etc..).
else if it is not printing properly tell the basis that they havenot configured the printer properly.
we are doing presently printing of barcodes using both zebra & sap printers.
Let me know, when you are through this basic check list.

Printing tab in Bar Code using SAPScript

Hi,
We are trying to print information from multiple fields in Bar code (using Code128 symbology) on our Utility Invoices, printing of which is done using SAPScript.
Our objective is that when accepting payment using FPCJ transaction, the Cash Desk Operator will use a Bar Code Scanner and import relevant invoice data into multiple fields.
However, for that to happen, it is necesary to print tab feeds between data of contiguous fields using Bar code.
We have tried printing tab feeds in Bar Code using hexadecimal '09'. But it has not helped. Can anybody suggest how one can print tab feeds in Bar Code using SAPScript?
Thanks in advance,
Arijit Mitra

Hi
See the doc related to BARCODE printing and do accordingly
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
Reward points if useful
Regards
Anji

Bar-code printing in smartforms

Hi All,
how to done or step by step procedure of bar-code printing in smartforms.....guide me please.
Thanks,
Regards,
Vishal Bhagwat.

Have a look at below PDFs. It will give all the details abt scripts.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRPROG/BCSRVSCRPROG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRRDI/BCSRVSCRRDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCREDIT/BCSRVSCREDIT.pdf
Also have a look at below links:
http://help.sap.com/saphelp_crm40/helpdata/en/16/c832857cc111d686e0000086568e5f/content.htm
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf.
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm

Bar code in Smartforms

Hi experts
can u plz explain me how to bring bar code in to smartform like invoice credit notes
step by step procedure
regards
Siri

Hai Sireesha
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Details information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
Barcode Standard
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Thanks & regards
Sreenivasulu P

To print bar code in smartforms.

Hi,
I want to print bar code in smartforms. how to do that one.
Thanks ,
sanjukta

Hi,
There's another way of doing it. Here we go... You can generate an ITF file for your data from any third party softwares.
Once you have the ITF file, this is what you have got to do.
Uploading label file to SAPscript
1. Use the standard text editor (Transaction SO10) to upload the print file to SAPscript.
2. Create a new standard text with any name. In the text editor load the created print file
(.ITF file) with the function "Text->Upload" and select "ASCII" as a format. Store the ITF
print file as a standard text.
3. Include the standard text in your SAPScript.
4. Set up Device Type Generally, a special device type (a variant of the device type ASCIIPRI) must be used for the correct printout of the layout set on a label printer. SAP supplies these device types on the ftp server sapservX and delivers them in the standard SAP system. The device type ASCIIPRI can normally be used for the basic test of procedure with other label printers.
5. Define your output Device As the last step, an output device (printer) must be set up in the R/3 with Transaction SPAD. The special device type or ASCIIPRI is assigned to this output device (printer). The application program must now use this output device to print the labels. The label printer connects itself to the R/3 via one of the standard available connection types in SAP R/3 (local print on the application server/removed print via lpd server/removed print via Windows PC and SAPlpd/frontend print). Your thermal printer must be connected to one of the available output channels for print output.
6. What is the Barcode Symbology you are using? Upload method doesn't support EAN.UCC 128. But still there is workaround.
Feel free to revert back.
--Ragu

Bar code Sapscript

Hi ....
Can anyone please provide me links to sapscript Bar Code tutorial .
I need to bar code a purchase order in sapscript .
Please advise ,
Thanks ,
Teresa

A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
To create barcode go to transaction se73 Then System Bar codes.
There are some barcodes already present.
If they solve your purpose,use them otherwise create new ones.
The main characteristics of barcodes are
1) Min. Char
2)Max Char
3)Width
4)Height
Now in your sapscript create a character format.
There you can see an option to select barcode.
From there select the appropriate type.
Now use this character format for the field you want to display the barcode.
U can also refer to
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
regards,
srinivas

SAPScript bar code output in PDF format

Hi,
I am working in 4.6D. I am trying to get the zip code bar code symbol to display in PDF as Postnet. When it displays at this point it has the numeric code that would trigger the simm module on a printer to print the corresponding bar code symbol. I need to get this to display in the PDF document as well. Does anyone have any ideas on how to do this in SAPScript?
Any help or suggestions well be greatly appreciated.
Mark

Hi,
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/frameset.htm
Thanks & Regards,
Judith.

BAR CODES in smartforms - conversion problems to PDF

Hello,
I have a problem. Have a look at the following points and see what I have done:
1. I generated several different system bar codes using SM73
2. I added those system bar codes to a smartformstyle
3. and built a smartform using smartformstyle of system-bar codes.
4. then I made some examples of bar codes in the smartform as text.
5. next I sent this smartform via email as an pdf attachment using smartform mail functionality.
6. shocking - all bar codes in the pdf-file are not readable. You can see that there is a barcode placed, but all barcodes looks like the same.
Has somebody got a idea on what is going on here?
I already had a look at OSS Notes 430887 and 645158.
Greetings
daniel

Hi,
Please can you have a look at Sap OSS Note 197177.
Regards,
Sudheer.

BAR code generation in smartforms

Hi Experts,
Can any body suggest me a site for the BAR code generation on the smartforms.

I have posted some information on this sometime back. Hope it will be helpful
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/design%252bbarcode%252bin%252bnew%252btechnology
Regards,
Mohaiyuddin

How to find bar codes and mails to send clients in smartforms

HI friends,
How to find bar codes in smartforms and also how to send mail to the client. I have developed one object in smartforms, but i don't know how to send maill to the client. Pls help me........................
Thanks in Advance.
Saradhi.

Hi!
Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Regards
Tamá

Generate bar codes in smartforms

Hi,
I wonder to know how can I add bar codes to a smartform. Bar codes should be generated in a automatic sequence and its number should be printed too.
Thanks a lot,
Nuno Moreira

Hi Gregor,
Let me try to explain better.
1. I'm using the bar code in smartforms and I'm able to generate the bar code graphic. But I want to print the bar code graphic and the bar code number, so what I was asking is if there is some way to associate automatically the number with bar code graphic, instead of write the number again with a regular font format, because like this is very difficult to format properlly the graphic with the associated number.
2. What I want to do is, print daily several letters identified with a bar code, so it'll be nice if the system could generate a automatic sequence of number to convert in bar code graphics.
I hope you could understand my doubts.
Thanks again,
Nuno Moreira

Adding bar codes to printer device for smartforms pdf conversion?

Hello friends,
I would like to send a smartform as a pdf to an email recipient. The smartform shows some bar codes. The send process workes fine. But the bar codes doesn't appear on the pdf correctly. Therefore I would like to add bar codes to the printer device type in transaction SE73.
Does somebody know the device type for smartforms pdf conversion? Or how can I add bar codes to smartforms pdf conversion process?
greetings
daniel

Hello Denial,
Try these links, this might solve ur problem
http://www.tec-it.com//documentation/TBarCodeSAPLPD_EN.htm
http://www.mecsw.com/info/appnote/app_024.html
if you need any more information send me at [email protected]
Thanks & Best Regards
Ankur Jain

Bar code printing issue in sapscript

hi guys,
there is an issue to capture bar code with special symbol in sapscript.
please advise what can be done here to solve the problem. Thanks.
zebra code in sapscript:
^BY2,3.0^FO36,66^B3N,N,56,N,N^FR^FD>:15[]=/\+|-79{}-02<30#$%^@?^FS
value capture through scanner:
15/+-79-0230
zebra code in sapscript:
BY2,3.0FO36,222B3N,N,56,N,NFRFD>:K7R161884B-FC16(DC>501)FS
value capture through scanner:
K7R161884B-FC16DC501

hi!!!!!!!!!!!
to print barcodes in sapscripts you have to do following steps..
1.choose Character format options
2. Then choose change mode.
3. provide a name say C1 in character format option and then press enter.
4.provide description for that character format say C1.
5.you can find barcode option.place the cursor in that one and press F4 then it will display the list of barcodes available.
6.choose one of them say BC_MSIC.
Now you have created a character format say C1 with the Barcode properties.
Exmaple:
If you want to print the price in barcode format which is in ITAB-Netwr, you have to give the syntax in the script editor like ....
<C1>&ITAB-NETWR&</>
then it will prints barcode in your output....

REG: Smartforms BAR Code

Hi,
I need a PACK list where I need to generate the BAR CODE . The BAR CODE should have the following information:
Sale Order Number | Header/Line item Number | Handling Unit Number.
All should be generated in the BAR CODE .
Can someone please explain the whole process in this regard
Thanks and Regards
Srikanth.P

Hello Srikanth,
In SE73, you can see number of barcode format available and hope, you know how to choose a suitable one or create a new one if required.
In the smartform transaction and in your style, you can create a barcode character format with the above selected barcode.
In the smartform, just create a variable and concatenate Sale Order Number | Header/Line item Number | Handling Unit Number into the new variable. Display the same using the above barcode character format.
Hope, I answered to your query. Please let me know if you have any concerns or more queries.
Regards,
Selva K.

Bar codes (Smartforms vs. Sapscript)

Similar Messages

Maybe you are looking for