Bar View / Time View :  Bug or Feature?

When switching between 'Bar' view and 'Time' view - there always results in a change in zoom level too.
For example if I'm viewing a complete arrangement in Bar view and then switch over into Time view, I have to then zoom out to fit the whole arrangement in the arrange window.
Seems to me like a bug. (small but nonetheless pesky!!).
anyone else get this behaviour?

Yes - I've gotten used to always setting up a cycle at my zoom spot before switching the view mode - this way the zoom will always catch up with my playhead when I hit play. I think it's a Bug - certainly not a feature...

Similar Messages

  • Viewing time in full screen mode

    Hello, I am using iMovie '11 (version 9.0.8) and would like to view time in full screen mode, and by time I mean hours: minutes: and seconds. Is it possible to view the playhead in the scrubber bar at full screen? I put a time code in my video, but I would like to see seconds, as well as minutes and hours. Is this possible?

    I'm having the same problem with an iMac! The bizarre thing is, if I open those same movie files using Quicktime, Full screen mode works fine. iTunes used to play the movies correctly in Full Screen mode but it doesn't anymore. I am using iTunes 8.0.2.
    Anybody have any ideas???

  • IWeb: changing the slideshow image scale and viewing time

    I moved my iWeb sites over to another server (iPage) and went through the sites to observe for inconsistencies and problems.  While doing this, I noted that my image galleries, when placed into the slides show mode, were very small on my iPad 2 and that they cycled through at a very high speed.  I thought this was odd and I wondered if anyone else has observed the same thing?  It sounds to me that an HTML under-the-hood modification may be required or a bug fix to the iWeb code is in order, to change the sideshow image scale and viewing time/slide value.  Comments?  [I suspect that Apple does not hold iWeb bug fixes at or near to the top of its software development to-does priority list.  Sounds like I need to change web authoring software.]

    Why do you think it's a bug?
    Anyway :
    Is there any reason photos in an album page display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?
    I use my own show :
    http://home.wyodor.net/photo/

  • Viewing time

    Is there a way to determine what the total viewing time of a
    captivate project is other than adding up the times on each
    individual slide?

    Hi there
    Storyboard is still there. It's just no longer a tab. Instead, it's a drop-down.
    If for some reason you don't see it (for example, it could be located in the upper right corner) try clicking Window > Toolbars > Workspace.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Hi im using a mac book pro, im having hard time viewing vidoes on Facebook, it just happen few hours ago, how can i fix it? thanks

    hi im using a mac book pro, im having hard time viewing vidoes on Facebook, it just happen few hours ago, how can i fix it? thanks

    Hello Terrychelle,
    Thank you for using Apple Support Communities!
    If the issue is to do with Safari, then you may need to reset it.
    Safari 6 (OS X Mountain Lion): Reset Safari
    http://support.apple.com/kb/ph11914
    Regards,
    Sterling

  • HT201514 i can't see the time capsule from airport utilities. i did follow "From the Apple menu, choose System Preferences. Choose View Time Machine. Set Time Machine to On if it is off. .....but i couldn't find the time capsule from airport utility.....

    i did follow "From the Apple menu, choose System Preferences. Choose View > Time Machine. Set Time Machine to On if it is off "
    . .....but i couldn't find the time capsule from airport utility..... why?

    Are you using a new 802.11ac Time Capsule - the "tall" one - and are you still using Mac OS X 10.6.8?
    You need OS X 10.7.5 "Lion" or later, or an iOS device, to configure an 802.11ac Time Capsule:
    http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdf
    See page 12.

  • Javascript error when selecting Spry Menu Bar in Design View

    Hi there,
    I get the following error message when trying to format the Spry Menu Bar in Design View:
    "while executing inspectSelection in spry_menu.htm, a Javascript error occurred."
    I have tried the following troubleshooting steps:
    deleting site cache
    closing/re-opening Dreamweaver
    deleting Spry Menu Bar and recreating - same error occurs.
    Other information:
    I am using a MacBook Pro
    it happens when clicking on the Menu Bar itself. I just want to change the properties
    the Spry Menu Bar does not appear in Live View.
    Here is a link to my site on Browserlab. It has not yet been published:
    https://browserlab.adobe.com/en-us/index.html#zoom=100;state=use;view=0;url=dreamweaver%3A %2F%2Fsite%3AHope%2520Against%2520Hope%2FHAH_home.html;browsers=WXPIE6000%2CWXPIE9000%2COS XFF7000%2COSXSF5000%2CWXPCH14000
    Is it a case of changing one of the values in the spry_menubar.js file?
    Can anyone help?
    Thanks,
    Charlie

    Hi there,
    The problem appears to have returned. I am getting the same error message as before and also an error saying there is a syntax error in my source code. Dreamweaver tells me which line the error is in:
    var MenuBar1 = new Spry.Widget.MenuBar("hope_menu", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
    In response to your earlier questions/points:
    I am using version 0.13 of SpryMenuBar.js (is this what you mean?)
    The menu now shows in Live View as I would expect it to
    Here is a link to my published site:
    http://hopeagainsthopeuk.co.uk/HAH_home.html
    Do you have any further advice?

  • JSF Design Time View Not working correctly for ADF/JSF components

    My project is not using any external tag libraries. It is based purely on ADF core/html and JSF core/html components. The design time view does not show the appropriate presentation, everything is shown as nexted frame containers (I suppose how you would show a component that does not have a visual representation).
    If I create a new project and copy my jsp (jsf) pages over they show perfectly. I did this activity and all was going well in the new project and then I lost the design time view again. I cannot tell you what I did to cause the issue, maybe it was a modification to the web.xml as has been suggested in some other threads. Can anyone tell me what I should be looking for that causes this problem, what corrective actions I might take to eliminate the issues

    Ok I have isolated this issue. In my phase listener I had this line of code:
    private static final Logger _logger =  Logger.getLogger(EigRequest.class.getPackage().getName());
    and I changed it to
    private static final Logger _logger =
    Logger.getLogger(EigRequest.class.getName());
    and design mode started to work. I guess either of the above works for me although I do not understand why the line works when you run the application but not in design mode.
    Moral to the story is if something fails in any one of these types of decorators you will drop into a raw view mode. The question I have is if errors are occuring how do I figure out where they may be. There is no indication that anything is wrong with the exception that you lose most of the design mode functionality.
    This was not a compile issue, this was not a runtime issue. It took me quite a few hours of writing a test program to validate that it was not just writing a phase-listener issue; then launching, editing, relaunching the application to find the problem. I will say that a good portion of the code came from a Eclipse project. If you add the offending lines of code while using JDeveloper you do not loose design mode immediately. You only see the problem the next time you start JDeveloper which complicates finding the problem.

  • I have the mobile gallery with an album of photos to be shown as a slide show. I cannot find how to Chang the viewing time. I'd like it to be 10 seconds. How do I do it. I have tried changing the general set tins in photo and pictue frame, but that doesn'

    How do I set different viewing times for the mobile gallery.
    I' like to change it from about 3 seconds to10 seconds.

    I hope this is something that will be corrected in the next vision of either theoperrating system, or in the gallery. three seconds is way too short for showing pictures to friend while telling abut them. Even apple's screen savers ware slower between the transitions.
    I'll do a search ontne store for an app. Do you think I should search for a different photo display, or for something that allows one to change settings on the current gallery app?
    thanks
    Phyllis

  • How do I stretch (or compress) the viewing time of a video clip in Elements 12?

    How do I stretch (or compress) the viewing time of a video clip in Elements 12?

    oxmox
    What computer operating system is your Premiere Elements 12 running on? For now, assumed Windows 7, 8, or 8.1 64 bit.
    Typically, if you increase the length of a video clip, you will create slow motion. If you decrease the length of a video clip, you will create fast motion effect.
    You can right click the clip on the Timeline, select Time Stretch, and use the Time Stretch dialog's settings to change the video duration.
    See the Adobe document/section on Set Duration of Clip
    Adobe Premiere Elements 11 * Changing clip speed and duration
    ATR
    Add On...As an aside, if you have not done so already, please update 12 to 12.1 Update, using an open project's Help Menu/Update.

  • How to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area

    how to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area
    ananya

    Hey Ananya,
    I believe what you want to do is possible, but it will not be
    easy.  If you want to add a scroll bar that will scroll the graph
    back and forth but keep the axis set, you would want to add a
    horizontal or vertical scrollbar.  Then you would create an event
    handler for the scroll event.  You would have to manually plot
    different data within this scroll event.  Unfortunately, there is
    not really a built in way to do this with the Measurement Studio plot
    control.
    Thanks,
    Pat P.
    Software Engineer
    National Instruments

  • Horizontal scroll bar in maintenance view

    Hi all,
             i have a ztable  which has ony two fields id and description. Maintenance view exists for same.
    Can anybody suggest me how to set 'HORIZONTAL SCROLL BAR' for this view as sometimes description is too large and not able to see the description. plz suggest me.
    plz help.
    thnks n Regards,
    Ashmita Singh

    You can do one of two things:
    1. When you are at the maintenance view, manually drag the right edge of the columns to make them narrower.
    2. If you can change the maintenance view, go to the function group with the same name as the maintenance view (which should be the one automatically generated, such as from SE54), and then find the screen in the function group. Open the screen, click "Layout", and the SAP GUI painter will display the screen layout. Over there, click the upper-left corner of the table, and the control TCTRL_<your_view_name> will be selected. Open the "attribute window" or press F2, and then you can set the number of Fixed Columns. Try reducing the number and re-test the effect.

  • Scroll bar in Content Viewer

    Hello everyone,
    I have place three different height images into a frame and applied scroll bar using Content viewer. I am calling each image through a button.
    My question is:
    Can we control the scroll bar height limiation as per the image's height. Right now its taking the largest image's height as a reference, when i click and check the small height image, i see lot of white space in it.
    Thank you very much.
    Regards,
    Shiva

    What do you mean you added a scroll bar? Do you mean a scrolling frame?
    If so, no, you cannot adjust the size of that dynamically. That said, I still don't totally get what you're doing.
    You can't click to move content in a scrolling frame, only an MSO.
    Bob

  • How to get tools and other bars back in view after deleting show-bar?

    How to get tools and other bars back in view after deleting show-bar?

    Hello Jouko.
    You can go into View > Toolbars and select the ones you want to see. If you can't see the menu bar you can simply tab ALT on your keyboard (I think F10 works too) to show it.

  • BUG or Feature?   Width & Height in Top Bar only in %, not in Pixel no Chance to change this

    Hello
    --- First: Please, im very sorry for my bad spelling - english is not my native language! Hope u can understand, what i mean. If it sounds bad or yelling someone - its not my intention! ---
    My Question:
    If i do Strg+T with a layer (ie. image or shape) in previous version you have the width & height in top bar and can easily read it or change when typing a new value in. With right mouse (Win) you can change % in px or em etc.
    In my Photoshop CC 14.2 i have only % and cant change this.
    If i try to read the dimension i can only see it on the info-panel.
    Its confusing. Is it a Bug or Feature?
    MJ

    anyone?
    .... alone ....

Maybe you are looking for