Barcode and Read Only Issue

Hi, I submitted this question in LiveCycle Designer and probably should have posted it here....
I have a form that was imported from a PDF document in Adobe LiveCycle Designer ES 8.2. I added a 3 of 9 barcode and the Default value is the form number (*1.764903.105NFS*). I do not want a user to be able to click on the barcode, so I made it Read Only. When this form is opened in Adobe Acrobat, I'm not able to click on the barcode, however, when this form is opened in Adobe Reader, I'm able to click on the barcode and the value displays (the form number) - which is what I do NOT want to happen. I have added Adobe Reader Extensions and I'm opening the form in Adobe Reader 9.4.
Also having the same barcode issue with forms that are designed in LC Designer.

Uncheck Read Only on the song files in Windows Exploder.

Similar Messages

Crashes and read-only file systems

Notice: I apolgize for the long post, I've tried to be as thorough as possible. I have searched everywhere for possible solutions, but things I've found end up being temporary workarounds or don't apply to my situation. Any help, even as simple as, "have you checked out XYZ log, it's hidden here", would be greatly appreciated. Thanks
I'm not sure what exactly caused the issues below, but they did start to happen within a day of running pacman -Syu. I hadn't run that since I first installed Arch on December 2nd of this year.
Setup:
Thinkpad 2436CTO
UEFI/GPT
SSD drive
Partitions: UEFISYS, Boot, LVM
The LVM is encrypted and is broken up as: /root, /var, /usr, /tmp, /home
All LVM file systems are EXT4 (used to have /var and /tmp as ReiserFS)
The first sign that something was wrong was gnome freezing. Gnome would then crash and I'd get booted back to the shell with all filesystems mounted as read-only. I started having the same issues as this OP:
https://bbs.archlinux.org/viewtopic.php?id=150704
At the time, I had /var and /tmp as ReiserFS, and would also get reiserfs_read_locked_inode errors.
When shutting down (even during non-crashed sessions) I would notice this during shutdown:
Failed unmounting /var
Failed unmounting /usr
Followed by a ton of these:
device-mapper: remove ioctl on <my LVM group> failed: Device or resource busy
Nother of these errors had ever appeared before.
After hours of looking for solutions (and not finding any that worked) I was convinced (without any proof) that my Reiser file systems were corrupt and so I reformatted my entire SSD and started anew - not the Arch way, I know I set all logical volumes as EXT4.
After started anew, I noticed
device-mapper: remove ioctl on LVM_SysGroup failed: Device or resource busy
was still showing up, even with just a stock Arch setup (maybe even when powering off via Arch install ISO, don't remember). After a lot of searching, I found that most people judged it a harmless error, so I ignored it and continued setting up Arch.
I set up Gnome and a basic LAMP server, and everything seemed to work for a couple of hours. Soon after, I got the same old issues back. The System-journald issue came back and per the workaround on https://bbs.archlinux.org/viewtopic.php?id=150704 and a couple other places, I rotated the journals and stopped journald from saving to storage. That seemed to stop THOSE errors from at least overwhelming the shell, but I would still get screen freezes, crashes, and read-only file systems.
I had to force the laptop to power off, since poweroff/reboot/halt commands weren't working (would get errors regarding the filesystems mounted as read-only).
I utilized all disk checking functions possible. From running the tests (SMART test included) that came as part of my laptop's BIOS to full blown fsck. All tests showed the drive was working fine, and Fsck would show everything was either clean, or
Clearing orphaned inode ## (uid=89, gid=89, mode=0100600, size=###
Free blocks count wrong (###, counted=###)
Which I would opt to fix. Nothing serious, though.
I could safely boot back into Arch and use the system fine until the system decides to freeze/crash and do the above all over again.
The sure way of recreating this for me is to run a cron job on a local site I'm developing. After a brief screen freeze (mouse still moveable but everything is otherwise unreponsive) I'll systemctl status mysqld.service and notice that mysqld went down.
It seems that it's at this point my file systems are mounted as read only, as trying to do virtually anything results in:
unable to open /var/db/sudo/...: Read-only file system
After some time, X/Gnome crashes and I get sent back to shell with
ERROR: file_stream_metrics.cc(37)
RecordFileError() err = 30 source = 1 record = 0
Server terminated successfully (0)
Closing log file.or_delegate.h(30)] sqlite erro1, errno 0: SQL logic error or missing database[1157:1179
rm: cannot remove '/tmp/serverauth.teuroEBhtl': Read-only file system
Before all this happened, I was using Arch just fine for a few weeks. I wiped the drives and started anew, and this still happens with just the minimal number of packages installed.
I've searched for solutions to each individual problem, but come across a hack that doesn't solve anything (like turning off storing logs for journal), or the solution doesn't apply to my case.
At this point, I'm so overwhelmed I'm not even sure where exactly to pick up figuring this issue out.
Thanks in advance for any help

Did this occur when you booted from the live/install media?
What is your current set up? That is, partitions, filesystems etc. I take it you have not yet reinstalled X but are in the default CLI following installation?
If turning off log storage didn't help, reenable it so that you may at least stand a chance of finding something useful.
What services, if any, are you running? What non-default daemons etc.?
Does it happen if you keep the machine off line?
Have you done pacman -Syu since installation and dealt with any *.pacnew files?
Last edited by cfr (2012-12-26 22:17:57)

Read Only Issues

Folks,
Using EPM 2007 with SP2
I have about 4 PM's that are having read only issue with some of their projects, this has just started to happen in the last month or so.
I have sat with them and have gone over their save / checkin method and cannot find fault with what they are doing. As the Admin I can access, update checkin / out etc no problems.
Checking in the "Clean Up Cache" the projects are registering "Not checked out". In the "Open Folder" they have a Cache Status of Checkin Pending.
Any suggestion greatly appreciated
Many thanks
Noel

Hi Sujit
Apologies for the delay, as per your direction all good now
Regards
Noel

How to use same view as editable and read only in ADF

Hi,
how to use same view as editable and read only in ADF ?? How can we achieve this in TF's ???
-mrudul

Hi,
Steven Davelaar wrote a presentation about this "Building Highly Reusable Taskflows"
Starting slide 14 is where your use case comes into play
Frank

Missing "illustrations" tab and read-only information

After a Windows XP Home repair, no illustration tab and read-only information by new music downloads. Have most recent itunes. Can someone help me...please?

Thanks Gilad, In that case, is there then a way (via a script) that if I leave field 2 as not readonly, so the cursor moves into this field on tab out of field one, that I can reject any input from the user, if field one does not contain any data ? I thought this might be a solution. I have the script with the If Else statement, that sets the value of field 2 to "", if the value of field 1 is also "", but what is the else statement required to accept the value, if the content of field 1 is not "" ?.
The script preoduces an error, if field 1 is blank, and I try to enter data into field 2 and then tab out of field.

Possible to make an item editable for certain users and read only for other

Is it possible to make an item editable for certain users and read only for others?
I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

Thank you, your suggestion worked.
It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

Can't mount USB disk with the atribute of fix and read-only

Hello All,
I have a usb disk which is set as fix(non-removalbe) and read-only. I tried to connect it to Macbook version 10.4.11 ,but it failed to mount the disk. However, connecting to 10.5.X and windows XP work fine. I am wondering is it a bug specifically in 10.4.11 only ? Could I get any patch for this problem ?
Thanks,
Ying

HI Ying and Welcome to Apple Discussions ...
Try repairing disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac.
Carolyn

Editable and Read-Only Date Picker have different display formats -- Bug?

Hi all,
This is a follow on to a previous posting about getting a Date Picker field to display read-only (Date Picker and Read-Only Condition works on LAST state of element
Now past that hurdle, I have noticed something about the date picker field when it is displays read-only. Namely, the date format is not the format selected, nor does the read-only date format comply with the format mask in the source section.
I've modified my small test app to work as intended in order to demonstrate this feature. I also opened it up so everyone can see it <blush>. You can find it here: http://htmldb.oracle.com/pls/otn/f?p=42513: Please navigate to the Update Project tab.
When a project in Program One through Four is selected (which has a Spec Committed date), the date is displayed DD-MON-YY format. When a project the other Programs (which do not have Spec Committed dates at the time of this writing) are selected, and a date value selected with the date picker, the date is displayed in the anticipated DD-MON-YYYY format.
Anyone else notice this, or have I just missed something obvious?
Thanks,
Petie

I'm not sure why this happens but to work around it I added this before header process code to the page:
execute immediate 'alter session set nls_date_format = ''DD-MON-YYYY''';
Scott

Stuck on ISW installation step - Config of other master and Read only

I'm trying to figure out how to complete one of the last steps for my isw install. Stuck on this step:
Configure the Sun Directory Server plugin on every other master and read-only replica that manage users under o=myorganization.

2011 Macs do not have a PPC processor. They have an Intel processor. Apple menu -> System Preferences -> Energy Saver allows you to modify the sleep settings.
Is your data backed up?

Issue regarding open word file and read only mode using c# & MS-word interop

i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
private void button1_Click(object sender, EventArgs e)
 object fileName = "";
 string filePath = "";
 string strSaveasPath = "";
 DialogResult result = openFileDialog1.ShowDialog();
 if (result == DialogResult.OK)
 fileName = openFileDialog1.FileName;
 //strSaveasPath = Path.GetDirectoryName(path.ToString());
 //fileName = "Z:\\C0000000003.doc";
 List<string> _list = new List<string>();
 _list.Add("tridip");
 _list.Add("arijit");
 //object fileName = "D:\\CVArchievePath\\C0000000001.doc";
 object textToFind = "test";
 object readOnly = false;
 Word.Application word = new Word.Application();
 Word.Document doc = new Word.Document();
 object missing = Type.Missing;
 try
 doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
 ref missing,
ref missing, ref missing,
 ref missing,
ref missing, ref missing,
 ref missing,
ref missing, ref missing,
 ref missing,
ref missing, ref missing,
 ref missing);
 doc.Activate();
 object matchPhrase = false;
 object matchCase = false;
 object matchPrefix = false;
 object matchSuffix = false;
 object matchWholeWord = false;
 object matchWildcards = false;
 object matchSoundsLike = false;
 object matchAllWordForms = false;
 object matchByte = false;
 object ignoreSpace = false;
 object ignorePunct = false;
 object highlightedColor = Word.WdColor.wdColorGreen;
 object textColor = Word.WdColor.wdColorLightOrange;
 object missingp = false;
 Word.Range range = doc.Range();
 foreach (string line in _list)
 textToFind = line;
 bool highlighted = range.Find.HitHighlight(ref textToFind,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing);
 System.Diagnostics.Process.Start(fileName.ToString());
 catch (Exception ex)
 Console.WriteLine("Error : " + ex.Message);
 //Console.ReadKey(true);
 finally
 //doc.Close(missing, missing, missing);
 if(doc!=null)
 System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
 if (word != null)
 System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
 word = null;
 doc = null;
 GC.Collect();
 GC.WaitForPendingFinalizers();

I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again.

Acrobat 7.0.9 and Reader 9 - Issues opening PDF in IE6

I'm hoping someone can help. All our users have Reader 9 installed as part of the corporate image. Some of our users run Acrobat 7.0.9 as well. For those users, we are experiencing issues where when we try to open a PDF in IE6. We get the following error:
SW:iexplore.exe_application error - The instruction at "0x052f51b6" referenced memory at "0x00000010". The memory could not be "read".
I've opened Acrobat 7.0.9 and checked Edit, Preference, Internet. The option to untick "Display PDF in browser" is greyed out.
I've opened IE6 and gone to Tools, Manage Add-Ons and there is nothing listed for "Acrobat Control for ActiveX (pdf.ocx)" listed.
I've tried uninstalling Acrobat and reinstalling. I've then also tried running a repair on both Reader and Acrobat, but nothing seem to be fixing the issue. This has only started happening since we upgraded Reader to 9 in our image.
Any advice on how to fix the issue would be greatly appreciated.

From: <[email protected]> | Adobe STRONGLY recommends that you DO NOT not have Acrobat and Reader installed on the | same system. If you have just Acrobat installed, it will perform all the functions | Reader does and much more. Therefore, you should uninstall Reader, install Acrobat, and | DO NOT install Reader again. | Ken F. Not to mention that nobody should be using Adobe Reader v7.x do to all the vulnerabilities in it that are *actively* being exploited ! -- Dave

CFLock, Read-Only Issues

I am trying to make edits to a previously read-only page. I
have added some queries and when I run the page, the queries are
not run. I have put the queries in a try/catch block and again, not
run. I have even put in random test (i.e. 'asdfasdf') hoping to see
it when I run the page; nothing. Maybe the page is cached or
something? I restarted CF services, but that still didn't help.
It's CF4.5, so maybe there are page caching issues?
Sorry for all the code, but the things I added are the
'asdfasdfasdf' after the InsertConsultant query, and I also added
the get_event_type query and catch try block. Thanks for any
help!

are there still people using cf4.5? man give me some poison
now please! I think cf5 should be banned and if you are still using
4.5 then you probably live in Darfur or something and I would
recommend php as it is free and facebook uses it so it must be
alright!! (hint hint adobe sort it out and make it free you are
leaving us developers out to dry here!!)

AJAX and Read-Only Items

I used the examples from Carl Backstrom and Denes Kubicek to get my cascading select list working.
I have two select list fields (Origin and Type) that I use to determine the data to appear in a third select list field (Customer).
With help from people on this forum I was able to get things to work.
Now I have an issue when I conditionally make the Origin field "read-only".
When this occurs, data appears in my "Customer" select list on the INITIAL display of the form.
However, when I change the value in the "Type" select list field, no data appears in the Customer select list.
If I change the "Origin" field to NOT be read-only, I can change the value in the "Type" select list field and everything works OK.
I hope I have given enough information.
THANKS in advance.
Raymond

Raymond,
It looks like read-only select is really special:
(I replaced < > with [])
When select is not read-only generated html is:
[select name="p_t01" size="1" id="P1_ORIGIN_NO"
onchange="get_AJAX_SELECT_XML('P1_ORIGIN_NO','P1_DISPLAY_SSA','','','P1_CUSTOMER','CASCADING_CUSTOMER_LOV')";
[option value="%null%"]%[option]
[option selected="selected" value="001"]DOTIKI MINE[option]
[option value="S01"]ECO COAL PELLETIZATION NO. 12, LLC[option]
[select]
It means that P1_ORIGIN_NO in get_AJAX_SELECT_XML will be "001"
But when select is read-only your html code is:
[input type="hidden" name="p_t01" value="001" /]
[span id="P2_ORIGIN_NO"
onchange=
"get_AJAX_SELECT_XML('P2_ORIGIN_NO','P2_DISPLAY_SSA','','','P2_CUSTOMER','CASCADING_CUSTOMER_LOV')";
DOTIKI MINE
[span]
[pre]
P2_ORIGIN_NO in get_AJAX_SELECT_XML will be "DOTIKI MINE" which I think is wrong.
It looks like for read-only you need hidden item with code of
drop - down list or somehow you have to reach [input type="hidden" name="p_t01" value="001" /]
Lev
Message was edited by:
le

Outlook 2013 and read only IMAP database.

We use GFI Mailarchiver's IMAP Server to give our employees access to their archived items. The IMAP server is read only mode as no one should be changing their archived mail. This worked flawlessly under Outlook 2010 and prior.
We have now deployed our first 2013 client and have now found that it is trying to write to the read-only database when forwarding or replying to a message that was found in the archive. My thoughts are that Outlook 2013 is try to modify the message in
the archive with the "you forwarded theis message on September 11, 2014 at 2:15pm" this causes Outlook to give the message "You cannot make changes to contents of this read-only folder.". The message seems like a nuisance only
but when you dismiss the message and try to close the forwarded or replied to message, you the the same message again and the only choice is to kill Outlook from the task manager.
Has anyone used Outlook 2013 in a read-only IMAP environment? Is there a setting to turn of the updates that Outlook is trying to make to the mail store?
Rob...

Hi,
Since you are using GFI Mailarchiver's IMAP Server, I'm not able to reproduce the issue or provide accurate suggestions in this case.
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Two questions: Event on a Date Picker and Read Only on a full page?

Hello,
I make use of this very informative board to develop an application but i have been unable to find info on these two topics. Sorry if it has been already discussed extensively.
Using HTMLDB 2.2 for now.
=>First question:
I have a date picker item with an event
onChange="resaStatusChange();"
in the HTML Form Element Attribute field.
The event is triggerring if i put a new data in the field but does not trigger if i use the picker.
Is it a standart behaviour? Is there a way to trigger the event when new data is provided through the date picker?
=> Second question:
One page in my application has to be used either to only display information or as a mixed displaying/entering data sheet.
When the context is appropriate to use the page as a simple display (testing both global authorization and data to be displayed), is there a way to put a read only attribute on the full page instead of putting the read only conditions through each and every item of the page?
Sorry if the questions are not clear and apologize for what should be newbie questions.
Any link or info will be appreciated.
Regards,
Daniel Gureghian

Hi Daniel,
I'm not sure about your first question, but I can hopefully give you a helpfull answer for your second one.
I'm handling it this way:
var elInput = document.getElementsByTagName('input');
var elTextArea = document.getElementsByTagName('textarea');
var elSelect = document.getElementsByTagName('select');
for (i = 0; i < elInput.length; i++)
setReadOnly(elInput, true);
for (i = 0; i < elTextArea.length; i++)
setReadOnly(elTextArea[i], true);
for (i = 0; i < elSelect.length; i++)
setReadOnly(elSelect[i], true);
function setReadOnly(pThis, pRead)
 if (pThis && pRead)
 pThis.disabled = pRead;
 pThis.style.emptyCells = "show";
 pThis.style.color = "black";
 pThis.style.backgroundColor = "#DDDDDD";
 else if (pThis && !pRead)
 pThis.disabled = pRead;
 pThis.style.emptyCells = "show";
 pThis.style.color = "black";
 pThis.style.backgroundColor = "#FFFFFF";
I never used it on a whole page, only for regions. So maybe you have to make some changes.
chrissy

Barcode and Read Only Issue

Similar Messages

Maybe you are looking for