Barcode: differences between mine and the original

Hi all,
I have to print labels with barcode in EWM 7.0; since I don't have any data yet, I hardcoded the code in the
smartform using the one of an original label (useful to compare the results), but the barcodes are different, also
the preview is wrong.
My barcode has to be 128 C, so I created a ZBARCODE of type 128 N and I added '>;' to my code to switch it into
type C, as the note 645158 says, but it doesn't work. I also tried to print it without '>;', the result is better,
but anyway it's different from the original. The code is constituted by 18 digits (check digit included).
I also tried to modify my barcode definition changing to type A and U, but without improvements.
To print it I use a Zebra through LOCL.
Thanks

Hi Aidan,
thank you for your response.
Thus, if my code is 123456789012345678, it must be written >5123456789012345678 to encode the subset C?
Then, what does '>;' mean?
What's the right procedure into the smartform?
CONCATENATE '>5' MY_CODE INTO V_CODE.
Then assign the paragraph with the barcode to V_CODE.

Similar Messages

Why is the price of my Iphone 5s higher than the official price? I bought a 16G balck Iphone 5s in America Airport recently, and it costed me $850. I wondered are there any differences between mine and the ones sold on the apple online store?

Recently, my friend bought me a 16G black Iphone 5s at America airport and it costed $850.
But I really hope to know why it cost $201 more than the ones that sold on apple online store, since the consumption tax can't be that much.
Really hope to get some help.

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

What is the difference between wifi and the 3G plus wifi?

I want to get an ipad for myself and I have no idea what the difference is between the regular wifi and the 3G plus wifi. If somebody could explain the difference to me so I can decide which one to get I would greatly appreciate it. Thank you in advance!

On the iPad if you use wifi you have to be close to a wifi access point either in your home or at a location such as Starbucks or Paanera. This connection normally will transfer data faster than 3G. However, 3G will give you access in areas where there is mobile telephone service from Verizon or AT&T albeit at a slower data transfer rate than wifi.
Wifi will be cheaper than 3G since you'll have to subscribe to 3G service from Verizon or AT&T.
BTW, you won't be able to use "3G plus wifi" at the same time.

Apple Care pricing differences between Canada and the US

My iMac is nearing its 1st anniversary and I am considering getting the Apple Care Protection Plan. I noticed that the price for this Plan in the US is $169 but in Canada it is $199.
The Canadian and US dollars are basically at par with each other. The Plan isn't a product but a service.
I did some spot checks on pricing differences between the two Apple stores and noticed that item are 8 to 10% more expensive in Canada but the Protection Plan is 15% more expensive.
I talked to someone at Agreement Administration. He was helpful but could only say that he too wondered about this price difference but had no information to justify the difference.
Anyone have any additional info on this? While it is only $30, something about it just rubs me the wrong way.

I do not comprehend how apple can charge more for Canadian versions of the same product, when our dollar is worth more!
I mean there is not a single product that costs the same in both the Canadian and American store, and it is not at all as if the price is affected by shipping since we currently get bogged down with a massive shipping cost on top of the excess price!
It is not as if it deprives Americans of some random pride since the UK apple store sells macbook for 699 pounds and not 1099 pounds!
Mac is competing in numerous markets, and with their products coming at a premium anyways, why not be cutting edge and make the Canadian price less.

Difference between U110 and the U330.

I was curious as to why the price of the U110 and the U330 differ so greatly? I assumed that being last years model It would have gone down and this years model would be the more expensive unit. Is there a difference in performance? Is last years model still better?

It's due to form-factor and weight.
U110 comparing to U330 is smaller (11,1" <-> 13,3"), thinner (22mm <-> 28mm) , weights less (1,09kg <-> 1,32kg), it uses 1,8" HDD coparing to 2,5" in U330.
All this is costy.
Small and powerfull laptop woths it's cost even if new more powerfull laptop (U330) is nearby it will never be the same size.
//help will save the world

What is the difference between spiceworks and the network monitor

ok thank you

is there a difference between the two or is network monitor a subset of the spiceworks desktop?
This topic first appeared in the Spiceworks Community

I have the original apple tv. Works fine. What's the difference between it and the new one that's only $99?

I paid $250 for the first generation apple tv and wonder if there's any new features to make it worth upgrading to the latest apple tv. What am I missing?
Thanks, Tzipora

The new one has no hard drive instead it has 8GB of solid state memory.
You can't sync to it as a consequence. It uses less energy, is smaller and doesn't get hot enough to fry an egg.
You lose analogue video/audio out. It's HDMI/optical only.
No mopre iTunes LP/Extras functionality. No sending audio to Airtunes speakers fro AppleTV.
The new one has a more powerful processor and can handle 720p 30fps which the old one couldn't and higher bitrates. It tends to be more responsive going through menus but I prefer ATV1's way of sorting things and interface in general.
You lose the ability to up/downscale video output to anything other than 720p. Output if fixed to 720p.
It's still evolving. To my mind it's more an iPhone/iPad accessory / iTunes rental vehicle with some US centric (on the whole) novelties - Netflix, American football feeds may appeal to US users, but no use if you can't get Netflix in your country.
The game keeps changing and iCloud features will enhance it's functionality but currently possibly only in US. iCloud may let users play their purchases across the internet rather than from local storage - could be gtreat if it works but only provided things remain available in the store.
US had TV Show rentals as well as Movie rentals, but TV Show rentals have been scrapped.
You couldn't purchase anything at all on it until recently, and that's probably only TV Shows and only in the US currently. No browsing music or music videos.
iphones/iPads can use the Airplay feature to send video/audio across wi-fi to the AppleTV but personally I'm not that impressed by it.
Vimeo has been added recently to complement YouTube, Flickr, MobileMe (end of line anyway).
It's a mixed bag really - suits some people down to the ground, has limitations for others.
AC

What's the difference between educational and the discount for existing customers

i am both a student and an existing customer. the price would be the same for me with the new promotion. which would be a better route to sign up as? with the existing-customer discount my understanding is that the price will go up after a year. what happens in the educational version after a year? are there any other differences i should know about?

Hi Mrtunes,
I'm not seeing any kind of noteworthy difference.
Here is a screen shot of the billing terms for signing up for the educational route (US store)
(click to view larger)
-Dave

Difference between FIS2R and the PFISR?

ok ive been looking at these 2 motherboards for a while now, and i cant seem to find any improvements on the new PFISR board.
it seems to me the older FIS2R is much better.
here are the only differences i can find:
1) the older FIS2R has a 2nd RAID controller (i think thats what the '2' means in its title)
2) the older FIS2R has a better gigabit LAN controller as its a CSA chip connected to the northbridge, where as the new PFISR only has Realtek chip. Not sure if the Realtek chip is connected to the north or south bridge.
3) the new PFISR has a better onboard sound card (the only improvement i can find).
can someone clarify these things for me.
also:
4) what does the 'P' in the title of PFISR mean?
5) does the PFISR have the DOT overclock function?
many thanks.
saturn.

The improvement of FIS2R to PFISR is the DOT performance.
The 'P'(PFISR) has DOT of 15% compared to 10% with the 'S' (FIS2R).(which actually in my point of view should be higher than this according to the development of the new DDR technology).
The 'P' has DOT mode option which can be set to 'CPU+VGA' or 'CPU only', the first option seems works only with MSI VGA which can be operated on DOT mode as well.
The 'P' make additional menu on Core Center which call 'OC menu' which done a manual OCing using preset DDR Frequency.
So if you didn't intended to use the DOT as Danny and NovJoe says you have not much different, can do manual manual OCing and Prescoot ready or not only.
Good Luck
Casing Tt Xaser III Skull
M/B 865 PE Neo-2 PFS Platinum Edition Bios Ver.3.6
CPU:P4 2.4C (HT enable) and ThermalTake SubZero 4G
(DOT Rank=Commander,Turbo,2395 mHz - 2760 mHz)
Memory: Corsair XMS 3500 2x512 meg (dual-channel dimm 1 and 3)
VGA:WInFAst A360 Ultra TDH(FX 5700 with 128 meg DDRII)
HD:2 SATA Maxtor 80gig and 1 ATA Maxtor 80Gig
CD/RW Yamaha and Pioneer DVD
PSU:ThermalTake Silent PurePower 480W (W0010/Black)
+5 V/40 A, +3.3 V/30 A, +12 V/18 A, -5 V/0.3 A, -12 V/0.8 A, +5 VSB/2 A Peak Load 550 W
Window XP PRO SP1
NEC FP2141SB
Microsoft DesktopPro
Sound Blaster Audigy 2 Platinum + Klipsch Promedia 4.1

Whats the difference between music and the library?

I'm trying to delete my playlists off my iTunes. I went to the devices and then to options and I clicked on manually manage music and videos and when I click apply is brings up a window that says that my phone is synced to another iTunes library, and if I want to erase and sync iTunes library? it says an iPhone be synced with only one iTunes library at a time. erasing and syncing replaces the contents of this iPhone with the contents of iTunes library. under library then music it says I have 273 songs but on my phone it says I have 485 songs. I don't understand that, and I don't want to lose all my songs that are on my phone. Mainly I need help with deleting playlists with not deleting my songs.

Any USB sound related item is going to use system resources instead of the non usb version. The non usb version uses the resources of the sound card and not system resources. So you should get cleaner sound with the non usb version.
But, be aware creatives tech support is not the best in the world. Keep that in mind when buying a product from them.

Price difference between PO and the Info Record

Dear Experts,
I am seeing a strange problem in the MM pricing, the issue is when i am trying to create a new PO for a specific material the condition record is being updated with the wrong price, when i checked the Info Record it has two prices old and new(currently valid), but when creating the PO the material is always picking the old price always, can you pl. give me a thought where the problem could be appearing ?
I tried to check all the dates, and everything is fine.
Thanks for your valuable inputs.
Regards,
RK

Hi Ravi
As you said if inforecord has 2 price 2 validity date created at the same time , in that case at table level first price and date is saved ..when old dates gets over ..in table, updation of new price is not done ..there is one program RM06INP0 which you can run and update the table with correct info record price ,so after that you can create PO and it should pick the correct price from Info records.
Check
Awaiting your reply.
Kishor

What are the differences between VISA and the old serial calls in regard to device communication?

Recently, I had to communicate with a piece of equipment, (a Yokogawa UM-330 Green Series Digital indicator). The device was configured to communicate using RS-485 protocol. I purchased a RS-485 to RS-232 converter in order to communicate with the device via COM 1 on my PC. When I attempted communication in Max, using VISA read and write commands, I could not get the device to communicate. I even attempted writing a stand-alone VI to establish communication. Still, no-dice. Finally, I resorted to using the old serial call VIs. This made the device jump up and say hello. What I really would like to know is, has anyone experienced problems like this when
attempting to communicate via seral with other devices using VISA, and if they have, what are the reasons for these problems? Is the problem specific to devices using RS-485? Or is the problem more device-specific?

We have been using serial devices for more than ten years (proprietary acquisition cards and third party devices) using a variety of languages (BASIC, CVI, LabView...). I always found that the main problem are correct configuration of the serial port and cabling: once these items are correct, it's easy to obtain some reply from your devices (maybe not so easy to obtain the CORRECT reply or to interpret it...).
I've used both old style VIs (vith LV 5) and VISA with success on the same devices: still I am a little confused about VISA. Maybe would be better some explanatory document by NI about VISA and serial communication.
Anyway, my approach is at present: don't bother about control panel and/or MAX configuration of the port: open the device and configure i
t as you need at the beginning of your application.
Next use simple VISA Write and VISA Read VIs.
Be sure to set the correct timeout: some devices are extremely long in replying (for example: an Infratek wattmeter takes as long as 45 seconds to send measures if you ask to it an harmonic analysis...!).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

What's the difference between Creator and the Enterprise?

I mean if I want to install a powerful tool for Java or J2EE stuff, which one is better and has the most functions? Enterprise Edition or Creator Edition?

Creator will be an additional pack to base NetBeans
too (not know when).Indeed the current strategy is to transform all Sun Java Tools into NetBeans addon packs. This nas been done already for Java Studio Enteprise (its source will be available in the NetBeans CVS repository by JavaOne). For Creator this is going to happen in NetBeans 6.0 timeframe which is 2007.

I recently installed Firefox OS Beta on my Nexus 7 tablet. What are the differences between that and the Firefox browser?

I recently installed Firefox OS Beta on my Nexus 7 tablet.

hello, it think you have installed the beta version of firefox for android. the beta version incorporates new features in the browser six weeks ahead of the regular release. so, you're currently on firefox 26 beat, so you're already getting the redesigned homescreen for example : https://www.mozilla.org/en-US/mobile/26.0beta/releasenotes/

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

Barcode: differences between mine and the original

Similar Messages

Maybe you are looking for