Barcode error when executing it in Web Server, using BAR_CODE_39

Hello. following error is evidenced when executing the Barcode sample in web-server :
REP-108: File '/tmp/srw088834566' not found
The variable CLASSPATH y DISPLAY were changed.
I miss it the fact is that it works when I use BAR_CODE_128.
With 39 he encounters error REP-108.
Your suggestions
Karina Gaona V.

you mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

Similar Messages

Dreamweaver CS3 fails when publishing to the web server using WebDAV

Dreamweaver CS3 fails when publishing to the web server using
WebDAV
using an earlier version (7.x/8.x) works fine.
Does anybody know if there is a solution for this.. This is
urgent..
Attempting to call the 1-800-833-6687 number fails with:
recording, music, rings as though someone will finally answer, but
gets a few dial tones and connection goes silent..
Thanks
J.

If all of your credentials are correct, Server Name/IP Address, Username, Password, Root Directory and it's still not connecting, I would try toggling the Passive FTP checkbox.
If you still can't connect in DW, try downloading a third party FTP program like Filezilla (free) and uploading there. If the third party app doesn't work either, there is likely a problem with your credentials and you would need to contact your hosting provider to straighten it out.

EVDRE encountered an error when retrieving data from web server

Hi
When I am trying to open Data Input=>Build a schedule using a dynamic template in BPC version for SAP netweaver, I am getting the below error "EVDRE encountered an error retrieving data from the Web Server".
I am not able to open any template, every time I am getting the same message. I have tried again after reprocessing all the dimension.
Even I have tried in appset APSHELL also, there also I am getting the same error
Request you to help me to resolve the above error which will allow me to proceed further.
Thanks in Advance.
Venkat

Hi,
Beside Nilanjan's solution, this error could also occur when the expansion is running more rows than the Excel limit allows (65'000 rows and 256 cols for Excel 2003)...
Even when you're using suppress field to reduce the number of rows, the first sequence is to retrieve the complete dataset before performing any suppression. And this could of course exceed the limit sometimes.
Hope this helps.
Kind Regards,
Patrick

Error when starting Sun ONE Web Server 6.1SP4 after successful installation

I have installed Sun ONE Web Server 6.1SP4 on my Solaris computer and I receive the following error when I try to start the Admin server:
Sun ONE Web Server 6.1SP4 B01/20/2005 17:43
failure: CORE3170: Configuration initialization failed: Error running init funct
ion load-modules: dlopen of /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so failed
(ld.so.1: webservd: fatal: relocation error: file /opt/SUNWwbsvr/bin/https/lib/
libares3.so: symbol __res_state: referenced symbol not found)
I am running Solaris 8 and I have installed Patch 108993-22 as stated in chapter 2 of the installation and migration guide. I have also installed patches 116602-01, 115827-01, 113648-03, 112396-02, 111317-05, 111310-01, 111111-04, 111023-03, 110386-03, 108987-15, and 108528-24 since they are necessary for patch 108993-22.
I have been stumped by this error. I have tried several different ways to install this software but I always get the same error. I believe that I have the latest version of the Sun One Web Server and I received no error notifications when I installed it! Any help would be apeciated!
Thanks!!!!!

I think this might occur if you don't have the patch for SunAlert 46042 installed. There's more information on this critical Solaris security vulnerability, which was reported back in 2002, at http://sunsolve.central.sun.com/search/document.do?assetkey=1-26-46042-1
Can you run the following command to check if you have patch 109326-09 installed and let us know the result?showrev -p | grep 109326If you don't have 109326-09 or higher installed, you should install it as soon as possible. You can follow the link from the SunAlert. Better yet, install the latest Solaris 8 recommended patch cluster from http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access to make sure your system is fully patched and up to date.

Memory error when executing package through SQL Server Agent.

Hi!!
I have a problem with a package (SSIS) when run on SQL Server Agent.
The job is configured
with the proxy and the account has the
required privileges. Runs perfectly
if the job runs manually, but if I let it
run on schedule I get a memory error.
Also if I run the
package through DTExec.exe or VS2008,
everything runs smoothly.
I am using SQL2008R2.
If someone has something similar happened
and have found how to fix it please i need
to know how.
Thank you.

This is most likely your issue:
http://support.microsoft.com/kb/824422

Error When Trying to Schedule Webi report using SAP authentication

Hii,
We are trying to Schedule Webi report in CMC for Group of Users using SAP authentication(SSO) ,While Trying this we are geting error Unable to Connect to SAP BW server Incomplete Logon Data ..(IES 10901) .
Authorization done at BI side and Its working properly.Users are able to login into BI Launchpad and View Report as per authorization
Some Webi reports are created using BICS connection and some are created using Universe Design Tool (.UNV) which are migrated from BO 3.1 to BO 4.0
Server Status:
BO server and Client Tools-:BO 4.0 SP6
BW System-7.01
Please refer attach Screen Shot

Hi Rupesh,
Please check the below note:
Seems issue with SNC/STS settings.
1798197 - Schedules fails with error "Database error: Unable to connect to SAP BW server Incomplete logon data.. (IES 10901)" in BI 4.0
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Workflow status web part gives error when going back to previous stage (using GO TO) in Project Server 2013 workflow

Hi,
Workflow status web part gives error when going back to previous stage (using GO TO) transition activity in Project Server 2013 workflow.
Please guide how to create a workflow which restarts from a desired stage.

Thanks for your prompt reply....
It gives following error
Workflow Status
This Web Part was unable to load.
Information that may be useful in solving this problem was written to the Unified Logging Service (ULS) log on the Project Web App with the following ID: e95a9c9c-1f68-90d7-0a3e-5951df70fec6
For more information, contact your Project Web App administrator.
what do you mean to restart the Project Server 2013 with different project name, please elaborate....

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

Error while executing query in OLAP server

Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puru

Purushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

SQL2005 cluster error MDB-05053 Errors when executing sql command: p nr="

Hi all,
We are migrating from 32 bit to x64 bit machines. SQL 2005 database on windows 2003.
I am trying to install E 4.7-200 SR1 on the clustered nodes. The installation manuals for 4.7 are very old and there is nothing for SQL2005 installation.
Now that some how we were able to have SQL up and running in clustered environment (It only took 10 days), After installing CI, I am not able to deploy the database and database creation phase is failing with the following error:
MDB-05053 Errors when executing sql command: .
I am heavily relying on our server managment team on clustering and hoping they have done a good job, However I need some guidelines which can help me in verifying what they have done is correct and meets SAP and SQL requirments and issues we are facing is actually install problems not cluster.
SAP install manuals are not detailed in this regards. Also manuals are out dataed and they only show the sql 2000 clustering pre-requisit for 4.7 installls.
Can any one with clustering experience please help.
Calling out NPC, As his sql installation and upgrade manual has helped me with stand alone installs, Hoping he has some thing for clustering as well.
Regards,
KG

Hi,
What installation CD/DVD are you using?
Try look at SAP note [924288|https://service.sap.com/sap/support/notes/924288],
and note [969699|https://service.sap.com/sap/support/notes/969699],
and note [967124|https://service.sap.com/sap/support/notes/967124],
and note [106275|https://service.sap.com/sap/support/notes/106275].
In special the last note say at the end:
"3. You must use the 51031444 CD to install Enterprise 4.7 on an x64 platform with SQL Server 2005. This CD installs the central instances and database instances. To convert the A and B nodes in MSCS, use the SAP NetWeaver 04 SR1 installation master CD or DVD."
Hope this helps
Regards
Rolf

Error when executing d2kwutil.pll procedure

Hi all,
I use a client/server architecture.
There was an error when executing the procedure write_registry in the w2kutil.pll. I created a test forms , and I just created a control block containing a button. In the when-button-pressed trigger I coded : win_api_environment.write_registry('HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE','TEST_REGISTR','D:\MYLOGS',true); . I already attached the d2kwutil.pll to the form module.
The error is : FRM-40734: internal error : pl/sql error occurred.
So how to resolve it ?
Thank you very much indeed.

You have that atachar the bookstore to the form and then you can make use of the contained functions inside the bookstore.

Error retrieving data from the web server in Excel fo BPC

Hello Everybody,
I'm working with BPC v7.5 , i created some reports with the EVDRE formula and they were working perfectly.
The problem started when i created new users, that in fact have the same access profile and task profile as my user.
i started to test these new users in excel and every time i expand the report this legend appears: " EVDRE Retrying... EVDRE encountered an error retrieving data from the Web Server. Retrying in (X) Seconds...". After waiting a while a push cancel, then appears a window with the legend: Ev4excel Addin, Errors found retriening data.
The funny thing is that when i login back to my user everything works fine again, any idea what could be the problem? the other user have the same permissions.
Thanks a lot in advance!!
Nidia Olguí

very strange. Normally the member access profile must be diifferent. So it is not important the task profile but the member access profile. Can you please double check ?
If you are doing a simple EVDRE with users having problems is it working or you still have problems?
Regards
Sorin Radulescu

EVDRE encountered an error retrieving data from the Web Server

Hi,
I'm working on a presales AppSet "Demo5b".
When I create a brand-new EVDRE report on FINANCE app, there is no problem.
However, after changing to ICMATCHING app, when I type =EVDRE() on a blank sheet and press Refresh, the following message pops up.
EVDRE encountered an error retrieving data from the Web Server
Retrying in (??) seconds
Any idea why this happens and how it can be solved?
Thanks!
Sunny

Hi Joost,
I have the same problem. When I try to retrieve data on an input schedule is launched that error.
I am working on an VM on MS BPC.
I am not working with cubes so the solution is not the same.
If i process all my dimensions this error does not appear any more?
Best regards,
Vitor

Barcode error when executing it in Web Server, using BAR_CODE_39

Similar Messages

Maybe you are looking for