Barcode Issues in Printer

Hi All,
We are using SMARTFORMs to print barcodes. The printer is HP 4350 .
When we are printing in Our Development System the Barcodes Prints and the Print Preview are coming out fine . But in our Quality System the barcode Print previews as well as prints are not coming out proper.The Barcodes are getting Misaligned.
Any hints.
Regards,
Arunava

Hi ,
Thanks for the Suggestion and I was also guessing that. Our BASIS team is looking into printer setup in Quality Vs Dev. But any more reasons that can cause this difference.
Regards,
Arunava

Similar Messages

Issue while Printing Barcode

Hi All,
We have an issue while printing Barcode from SAp script.
We are using the barcode BC_C128B with font HELVE 10. We can see proper length of bar code
in print preview but when we take the print of the Bar code the dimensions of Bar code get doubled.
Could you please provide some expert inputs?
Thanks
Saurabh

Use SE73 and change the font in the barcode as per your requirement , if this barcode is used in any other programs then copy this barcode to Y or Z name and change according to your need and use it in your program
a®

Issue in printing the batch document with the T-code COPI

Issue in printing the batch document with the T-code COPI.
So Batch document is not printing not printing.
Kindly help.

I would suggest to read this blog as a starting point: Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers
then rephrase and enhance your question with some facts because in the moment it is not at all sufficient enough for anybody to help you further on your particular issue.
I am even in doubt that you posted this issue in the right forum, has this PP transaction really something to do with ABAP Connectivity. Check the space overview page of ABAP Connectivity , under the picture you can read what this space is about.

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

How to print BARCODE in DATAMAX Printer using SAP Script?

Hi,
Can anybody guide me how to print BARCODE using DATAMAX Printer?
I need to develop a SAP Script, through which i need to print the BARCODE.
Pls. let me know the parameters for Script and how to print using print program.....
Regards,
Hemant

make one form in sapscript with one main window: like this
/E           ETIKETT
/*           Format = '57x19', Printer = 'Bradyprinter Model 1344'
/           ~f350
/           ~n
/           ~M0500
/           ~O0220
/           ~SG
/           ~s
/           ~c0000
/           ~e
/           ^D
/           ~L
/           D11
/           H20
/           PC
/           pC
/           SC
/           A2
/           1911A1200400005&knmt-kdmat&
/           1911A0800300005&knmt-postx&
/           1911A0800100005VS-Nr   :         &KNMT-MATNR&
/           1911A0800000005Datum   :         &date&
/           Q0001
/           E
in this script   &mseg-matnr&    and    &mseg-charg&    are 2D Barcodes
/E           ETIKETT
/*           Format = '57x19', Printer = 'Bradyprinter Model 1344'
/           ~f350
/           ~n
/           ~M0500
/           ~O0220
/           ~SG
/           ~s
/           ~c0000
/           ~e
/           ^D
/           ~L
/           D11
/           H20
/           PC
/           pC
/           SC
/           A2
/           1Wc99000001400082000012012&mseg-matnr&
/           ySPM
/           1911A1000380055&mseg-matnr&
/           1Wc99000001501702000012012&mseg-charg&
/           1911A0800260055&mkpf-budat&
/           1911A0800140055&mseg-mblnr&
/           1911A0600020008&makt-maktx&
/           Q0001
/           E
then you need your own printprogram and everything is fine. with open_form ; start_form ; write_form; end_form
you can communicate direct with the Datamax Programming Language from SAPScript to the Barcode printer.
i also have the datamax programmers manual as pdf if you want i could send it to you. let me know by PM.
also have look into HW 490295 the bartender Solution works fine for me to create the SO10 text's
greetz
tony
Edited by: Tony Wienhold on Jul 17, 2009 4:37 PM

Acrobat 9 Pro issues with printing and now updating !!! :(

hello
I had an issues with printing from my gmail account or from windows live mail
so I made a complete re-installation
now I am stuck with version 9.3.0 and when I check for updates I get a message
UPDATER IS ALREADY RUNNING
only... it's not running and nothing is updating !
I made a restart... just in case... it did not change anything
as to the printing issue, in case some of you have met it and cleared it...(hope)
this was with version 9.5.0
I get no error message but no pdf is created, only a text document with this :
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
72gmvi not found, using Courier.
44dcmta not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
[96 96 97 72 96 42 64 0]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
not a good start for my week... I hope yours is nicer
I'm running Win7 Ultimate x64

thanks Mylenium
the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
does my question make sense ????

Read Only Barcode Issue

I have a form that was imported from a PDF document in Adobe LiveCycle Designer ES 8.2. I added a 3 of 9 barcode and the Default value is the form number (*1.764903.105NFS*). I do not want a user to be able to click on the barcode, so I made it Read Only. When this form is opened in Adobe Acrobat, I'm not able to click on the barcode, however, when this form is opened in Adobe Reader, I'm able to click on the barcode and the value displays (the form number) - which is what I do NOT want to happen. I have added Adobe Reader Extensions and I'm opening the form in Adobe Reader 9.4 and Adobe Acrobat Professional 7.0.
Also having the same barcode issue with forms that are designed in LC Designer.

you can verify your selectionListener event by creating your own custom selection listener
public void mySelectionListener(SelectionEvent selectionEvent) {
FacesContext fc = FacesContext.getCurrentInstance();
String me = "#{bindings.myViewObject1.collectionModel.makeCurrent}"
MethodExpression myMethodExpr = fc.getApplication().getExpressionFactory().createMethodExpression(fc.getELContext(),me, null, new Class[] {SelectionEvent.class});
myMethodExpr.invoke(fc.getElContext(), new Object[] {selectionEvent});
RowKeySet rwKeySet = selectionEvent.getAddedSet();
and in your jspx <af:table selectionListener="#{package1.view.backing_myBackingBean.mySelectionListener}"/>
by that way you can atlest verify whats wrong... ,hope this helps,

Barcodes are not printing

Hi,
We have a printronix printer model Printronix T5304 with the device type added LB_PRI. The requirement is Barcode printing and i have added the 2 Barcodes ZUCC_LA
ZUCC_SP to this device type but still the Barcodes are not printing. Can you suggesst me is there any other device type that i can use to test. I would request you to check the belwo output status also.
Output status: The status of the output request is showing complete and the spool list showing the barcodes but when physically printing barcodes are not printing only numbers are printing. I checked the entry has been correctly updated in print controle area. But not sure how to change the character format to match in the sapscript.
Regards
Dellibabu

Hi Deli
Hope you are using the new bar code technology while creating the barcode in SE73. This could be the possible reason for the barcode not getting printed.
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
Hope this helps.
Regards
Neeraj

Issues with printing purchase order

Dear friends,
I'm having some issues with printing purchase orders.
Normally when I create a purchase order via ME21N and then when I save the purchase order it then gets automatically printed.
Suddenly it is not anymore working. I have created a purchase order this morning and it did not get printed. I get the message "frontend is not available"when i check the spool in SP01
The funny think is if i call up the spool nr via SP01and then do a reprint then i'm able to reprint.
What can be possibly the issue that I can't print the purchase order when I create the purchase order via ME21 when I save the purchase order? Can you help me with any guide on where I need to check why the PO is not printing immediatelly when i create the PO via ME21N?
kind regards,
Camilla

hello all,
thanks so far for your reply.
i have checked today my user settings and that shows that my prints should go to LOCL (local default printer)
The output conditions fpr purchase order have also LOCL (local printer)
The weird thing is that I can print other reports to the default printer without any issues. The issue arise when I create a purchase order via ME21N. Normally when I save the PO it automatically prints. So no manual print instructions are required from my side. Because if I give manual instructions then I'm able to print the purchase order.
Is it possible that the automatic printing is switched off and that it only prints when I hit manually the print button?
Is the automatic printing something that is maintained in SPAD?
kind regards and thanks for your help sofar

Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

Issue with print image in air

hey frnd,
plz check this link
http://livedocs.adobe.com/flex/3/html/help.html?content=printing_5.html
hey frnds,
while using this multiple print datagrid code, getting 1 issue with
print image in printheader mxml file.
I'm adding 1 image tag and runtime getting image path in variable and
want to print tht image in header ,
but it is not get printed but if i'm giving @Embed image as a source
then it is print.
Is any way there to print runtime image after adding in printheader
file ?
thx in advanced,
[email protected]

is any solution there ?

I have a user that has an issue when printing to PDF.

I have a user that has an issue when printing to PDF. When printing to PDF the PC will intermittently freeze and sometimes the print spooler will crash taking all other printers offline. A reboot clears it up for a while but then it comes back.
Acrobat 11 Pro
Windows 7 x64
Office 2010 Professional
Any help would be great! Thanks

I manage a network of 30,000 + workstations all with Acrobat Pro 10. Upon upgrading to 10.1.10, they all exhibited similar symptoms printing to the PDF printer. The problem is most obvious in IE 11, it will cause the browser to stop responding, however it seems to depend on the page being viewed. For example we can print google.com, but not yahoo.com.
And of course there is no method to roll back to 10.1.9, other than to completely remove and re-install Acrobat.
I hope this is getting addressed soon!

Decoding 2D barcode on forms printed from Adobe Reader

We use LiveCycle Designer 8 in Adobe Acrobat 8 Pro to create forms, which are then opened, completed and printed using Adobe Reader, then signed by the user and mailed back.
We believe we can put a 2D paper forms barcode on the form, but if filled in by Adobe Reader the data gets encrypted and so cannot be scanned (though if completed by Acrobat, the data is not encrypted - unfortunately most customers do not have Acrobat)
We heard that you could buy software or a hardware device to enable the received printed forms to be scanned and the 2D data decoded - is this correct still?
Thanks

In regards to the Decoder, this is a piece of software that does the actual decoding of the barcode from a printed and scanned form (or faxed). It can decode barcodes from both TIFF and PDF documents.
If you are using a high-speed scanning solution then you more than likely have a decoder built into your solution. If not, then the decoder is an ideal add-on solution. In fact, with the new Adobe LiveCycle Barcoded Forms ES you can not only decode but you can integrate the data right into your existing workflow quite easily.
For a great overview of the ES line, check out: http://www.adobe.com/products/livecycle/techsummary.html?showMyTab=tab_foundation
Lee.

Barcode is not printing but it appears alright in preview

Hi Guys
I am trying to print a barcode in sap script. Barcode is coming perfect in print preview but it is not appearing in Printing. It is displaying the value for of the variabke for which i m trying to print the barcode in printing. Do certain settings need to be made for printing barcode in scripts?

Hi Richa,
Check in SPAD if the output device supports the Barcode or not.
You could ask Basis and they will add the barcode type to printer fonts if it is not there.

Barcode Issues in Printer

Similar Messages

Maybe you are looking for