BARCODE PREVIEWING BUT NOT PRINTING

Hi GURUS / EXPERTS;
I have created a SAP SCRIPT FORM and Driver program for BARCODE Printing. Now my problem is that the
BARCODE is appearing on screen (Preview), but when print system print numbers instead of BARCODE.
Steps carried out: IN SE73: Create a SYSTEM BARCODE WITH NEW TECHNOLOGY, check the preview, it is OK.
IN SE73: SAP SCRIPT FONT MAINTENANCE: Defined the prefix & Suffix (SBP26 & SBS02) for that BARCODE & DEVICE.
IN SE71: created a character (BC) reich check the check box (Selection) and select the barcode.
Use that character in script as <BC> &T_BAR-CHARG&</>
in SE38: use the driver program to call the script form: IT DISPLAY THE BARCODE, BUT WHEN GIVE THE PRINT- PRINTING THE NUMBER. 123456 - Where 123456 is the value of T_BAR-CHARG.
Please help. or suggest where I am wrong.
Thanks in advance.
DSC.

Hi,
It is correvt that the new barcode technology is only supported via smartforms, see SAP Note #645158.
With sapscript, your printer must have barocde fonts installed.(see SAP note 45643)
Another solution is to print via a Windows system with a windows device type like SAPWIN or SWINCF and a barcode.dll.(see SAP note #14561)
Regards,
Aidan

Similar Messages

Charactersvisible in preview but not printed from Reader

Hi,
System: Mini Mac, Canon MX870, Adobe Reader 11 (up to date)
When downloading pdf from our uni web site (exam candidate lists etc) the document prints faithfully from OS Preview but printing directly from Reader causes character loss (such letters as y, and others). I know the work round with print as image, and Preview works as well, but just wondered what I have to tweak in Reader to get documents to print (AR is up to date).
Many thanks
Mevado

Hi,
Sorry, would like me to send a link? Or is this some arcane function I should try? Sorry to be faecitious, unfortunately the file is covered by German confidentiality laws, as it is a list harvested from our internal internet site with names of candidtaes for an exam. I can try to modify it a little to remove potentially sensitive information. We have very strcit laws on privacy and personal data in Germany, at least as far as public institutions are concerned.

Standard text displayed correctly in print preview but not in print

Hi,
I have a script in which a standard text has to be printed in the output.
The standard text contains some german characters.
These characters are displayed correctly in print preview but not in print.
The text is maintained in 3 languages DE,EN and Russian.
The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
Please suggest something.
Regards,
Richa Aggarwal

Hi Richa,
Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters. If a character does not display then that means it does not exist in the font that you are using.
Regards,
Ryan Crosby

Getting values in preview but not on paper

hi gurus,
the variables on a window is showing values in preview but not on paper the window is above a top-left portion of other window..
i need to display those variables on paper at print time...as alignment is perfect ..suggest me how to do?
thnx in advance!!

DEAR SEE THE POSITIONING OF WINDOWS,
FOR THE BOTH WINDOWS WHICH ARE COLLIDING,
GO TO OUTPUT OPTIONS AND MAKE UPPERMARGIN AND HEIGHT IN SUCH A MANNER THAT THEY NO LONGER COLLIDE.
SEE THE OUTPUT.
I THINK THEY ARE COMING NOW.
REWARD IF USEFUL.
aMIT sINGLA

Correct preview, but wrong print out.

Hi all,
I created a new page format of size 255MMX205MM .Also created a format type with the same name.Copied the device type SAPWIN and added the new format created .Now the smartform that i created(using the new page) is all right in the print preview but the printer is printing only the A4 area (ie. skipping alot of space in the next page). What could be the reason ?The printer i am using is dot matrix(Lipi TallyGENICOM 6312 ). Eagerly waiting for respone. Thanx in advance.

Hi,
With windows device types like SAPWIN and a custom pageformat like e.g. Zxxxxx, there is no command sent to the Windows to
select the page format, so the default Windows page format is used.
As a solution, you can set a default page format in Windows. In thiscase, then you must set up the Windows default page format to match the paper size you require as described in the SAP Note 163136.
Regards,
Aidan

In Pages (5.2), in a table, superscript is not only not printing, but not printing the text around it. Bizarre

In Pages (5.2), in a table, superscript is not only not printing, but not printing the text around it. Any answers?

Known issue now for almost 9 months.
Use Pages '09 if you have it.
Peter

HP DJ1510 AIO Printer-CAN SCAN BUT NOT PRINT

I installed SW & HW as per HP instructions on my comp (WinXP-SP2). Scanning worked but cannot print as the printer driver (which may be missing or faulty on the CD and also in installation files downloaded from HP web site) does not get installed.
HP, India has not come up with any solution to this issue despite my spending many hours with them since 20/9/14.
HP needs to give me a patch for installing printer driver in my OS, which should not be difficult for a company like HP.
I am now frustrated with this HP product & its service. All promises but nofollow up or even phones are not picked up
Who will help me or should I throw away this HP printer.
BM Shah

Hi @bmsprinter,
Welcome to the HP Forums!
I understand that your HP Deskjet 1510 can scan but not print with Windows XP (Service Pack 2). I am happy to help!
According to your printer's specifications, found at this website, HP Deskjet 1510 and Deskjet Ink Advantage 1510 All-in-One Printer Series Product Specifications. This printer is only supported on Windows XP (Service Pack 3) and above. You can select System requirements, and then Windows system requirements, once you have visited that website.
Also, please take a look at this reply, Re: cannot find priner, by my colleague @Jamieson, from your older post, that will help you upgrade your Windows XP Service Pack.
Hope this information is helpful, and have a wonderful day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

When downloading a pdf, the print command show a document in the preview but only prints blank pages

When downloading a pdf and using the print command, it shows the correct document in the preview but only prints blank pages. If I use the save command and try to open with Acrobat 11.0.07, it says it wasn't correctly decoded and can't open it. If I do the same thing on my old Macbook (10.6.8) all works fine from the same website with the same document. Any ideas?
D

This article maybe help to you, change pdf file type to other application like adobe reader, See:
* https://support.mozilla.com/en-US/kb/Managing%20file%20types

Flash work in preview but not in the browser!?

Hi there:)
I have a .swf file in a table in Dreamweaver. When I preview it in place and in Safari, it plays. When I upload eveything, it is not in any browser on the server.. any ideas?
Thanks!
V

Hi John!
Yes, sorry about that.. here it is.
http://farmingtonfarm.com/appraisal.html
Thanks for your help!!
v
Date: Thu, 8 Apr 2010 18:52:05 -0600
From: [email protected]
To: [email protected]
Subject: flash work in preview but not in the browser!?
Can't really help without a link to the site. Can you provide one?
>

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

Two issues getting a headless error form windows & my clips audio plays in the preview but not once placed in th timeline. I taped with a panasonic HC 750 V. i believe it is with clips filmed using directed not surround audio.

The title more or less says it all. I have Elements 13 & am Using the Panasonic HC 750V. I shot in AVCHD 1080/60p & instead of surround sound choose the directed feature to focus on the voices in front of me. The audio works in preview but not on the timeline. I am also getting Headless errors when working with premiere that pop up in windows but it does not shut down the system.
Any help apprecaited.

pc
Have you updated your Premiere Elements 13 to 13.1 using an opened project's Help Menu/Update. If not, please do so.
Just some points of clarification on the AVCHD 1080/60p with which you are having audio problem in Premiere Elements 13.
a. I see no option to record to tape with your Panasonic model. Is there one? if not, what was recorded to, a memory card?
b. When you talk about directed not surround audio, are you saying that your video uses Dolby Digital 2 channel stereo instead of 5.1 channel?
c. Is your AVCHD footage presented to you as AVCHD.mts rather than AVCHD.mp4. I think that is the case if you are referring to Dolby Digital
rather than AAC audio.
Are you saying that you get play back video and audio if you double click the video's thumbnail in Project Assets, but you get video but no audio after you drag the file to the Timeline and play back its contents in the Edit area monitor?
a. Have you checked the Volume control under the Adjust Tab/Adjustments Palette/Volume Panel expanded to make sure the Volume has been taken all the way down? Under that condition, you will get play back in the Preview Window, but no audio from the Timeline level play back in the Edit area monitor.
b. In that same regard, if you look at the Timeline audio clip, note a yellow orange line that runs horizontally across the duration of the audio clip. Is that at the bottom of the frame or is it in the middle or at the top?
Do you work with the Elements Organizer at all? That Headess issue sounds like an Elements Organizer issue. More on that later. That issue should not prevent you from continuing your work. But we will explore that next.
Thanks.
ATR

Adobe Flash 11.9.900.152: objects not showing in print preview and not printing

When I select print from Adobe Flash 11.9.900.152, objects are not showing in print preview and not printing on the printer. I have tried to print from both MS Internet Explorer and Google Chrome--neither work.
I am using:
Windows 7 Home Premium Service Pak 1
Internet Explorer 10.0.9200.16618
or
Google Chrome 31.0.1650.57 m
How do I resolve this issue?

What is it you're trying to print?

Captivate 3 shows skin in preview but not when I run after published?

Captivate 3 shows skin in preview but not when I run after published. It shows it is included, what's up?

Is the Skin externalised? If so, perhaps Flash Global Security is interfering:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
You could also try NOT externalising the skin.

Load swf works in Publish Preview but not when published

Hi Folks,
I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
SecurityError: Error #2000: No active security context.
I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
Any help would be much appreciated and rewarded with Karma
movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
var fl_Loader_9:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_9:Boolean = true;
function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
if(fl_ToLoad_9)
fl_Loader_9 = new Loader();
fl_Loader_9.load(new URLRequest("search.swf"));
addChild(fl_Loader_9);
else
fl_Loader_9.unload();
removeChild(fl_Loader_9);
fl_Loader_9 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_9 = !fl_ToLoad_9;
movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
var fl_Loader_10:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_10:Boolean = true;
function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
if(fl_ToLoad_10)
fl_Loader_10 = new Loader();
fl_Loader_10.load(new URLRequest("refunds.swf"));
addChild(fl_Loader_10);
else
fl_Loader_10.unload();
removeChild(fl_Loader_10);
fl_Loader_10 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_10 = !fl_ToLoad_10;

I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

Simple buttons working in Preview, but not on iPad

Hello everyone. I have a Button (I'm working in InDesign CS6), with instructions "Go to State". It links to a photo on a seperate layer. The link works perfectly in the SWF preview (shift-command-return). But when I update the file to view it in Adobe Viewer it does not work. (I am using Viewer Vers 25) There are no other functions on the page that could be "blocking" it. In fact, on some pages where there are two or three buttons (all of them with instructions of "Go to State"), 2 may work and one not. I am confused as to how I can see it working in the Preview, but not on the iPad. Any suggestions appreciated. Many thanks!!

Bob, just got in and downloaded the patch - the buttons are working perfectly now!!
Thank you for taking the time to help me out!! I'll be more diligent from now on in checking for updates. Thanks again. James

BARCODE PREVIEWING BUT NOT PRINTING

Similar Messages

Maybe you are looking for