Barcode Printing in Canon iR Advanced

Hi All,
Does barcode printing available for Canon iR Advanced copier? (e.g. iRA C5051).
From Canon website, I cannot find related information about iR Adanced.
Any suggestion?
Patrick

The UFR2 driver does support Dept ID printing, providing you have the Mac's printing directly to the C2020. I have added some screen captures for the UFR2 driver to an iR C3380, the same applies to the new ADVANCE C2020.
If you have a document to print, let's say a PDF in Preview, and open the print dialog, you should have a Special Features menu as shown.
If you press the Printer Info button under the copiers picture, this will communicate with the copier and determine that Department ID Management is enabled, as shown. Note also the coins and calculater icon in the bottom left of the copier image.
OK this window which will return you to the Special Features above. But now you will have Job Accounting check box, which will be ticked.
If you press the Settings button, highlighted above with the red box, this will present a window where you can enter the department ID and password for this user, and also select whether you want the ID pop-up window when you print, so that you can change the ID/password if needed.
You are now ready to print to the C2020.

Similar Messages

  • Barcode Printing for Canon iR Advanced Copier

    Hi All,
      Does barcode printing available for Canon iR Advanced copier? (e.g. iRA C5051).
      From Canon website, I cannot find related information about iR Adanced.
      Any suggestion?
    Patrick
    Moderator message: not directly related to ABAP development, please have a look in the Netweaver forums.
    Edited by: Thomas Zloch on Mar 2, 2011 11:32 AM

    The UFR2 driver does support Dept ID printing, providing you have the Mac's printing directly to the C2020. I have added some screen captures for the UFR2 driver to an iR C3380, the same applies to the new ADVANCE C2020.
    If you have a document to print, let's say a PDF in Preview, and open the print dialog, you should have a Special Features menu as shown.
    If you press the Printer Info button under the copiers picture, this will communicate with the copier and determine that Department ID Management is enabled, as shown. Note also the coins and calculater icon in the bottom left of the copier image.
    OK this window which will return you to the Special Features above. But now you will have Job Accounting check box, which will be ticked.
    If you press the Settings button, highlighted above with the red box, this will present a window where you can enter the department ID and password for this user, and also select whether you want the ID pop-up window when you print, so that you can change the ID/password if needed.
    You are now ready to print to the C2020.

  • How to set up department ID printing on Canon IR Advanced C2020

    We have a few Mac users (ranging from Leopard to Lion) that need to be able to print to our network printers. When I set them up to print to the Toshiba network printers I get the option of "Print Mode" in the printer options and then I can add their department ID so they can print. However on our Canon printers (IR Advanced C2020) that option doesn't exist and I can't send any print jobs through. I've downloaded and installed the UFR II v2.30 drivers and added the copier successfully. Is this option not available with this style of printer? Am I spinning my tires trying to get this to work?

    The UFR2 driver does support Dept ID printing, providing you have the Mac's printing directly to the C2020. I have added some screen captures for the UFR2 driver to an iR C3380, the same applies to the new ADVANCE C2020.
    If you have a document to print, let's say a PDF in Preview, and open the print dialog, you should have a Special Features menu as shown.
    If you press the Printer Info button under the copiers picture, this will communicate with the copier and determine that Department ID Management is enabled, as shown. Note also the coins and calculater icon in the bottom left of the copier image.
    OK this window which will return you to the Special Features above. But now you will have Job Accounting check box, which will be ticked.
    If you press the Settings button, highlighted above with the red box, this will present a window where you can enter the department ID and password for this user, and also select whether you want the ID pop-up window when you print, so that you can change the ID/password if needed.
    You are now ready to print to the C2020.

  • Canon 5030 advanced printer drivers will not install on my hp dv6000 laptop

    my  company is trying to install their canon 5030 advanced printer drivers onto to dv6000 laptop so i can print at work and they will not install.  there are no error messages it just won't install.  i do not, cannot get a new laptop. i need to make this work. HELP
    my os is xp  sp2 with most recent updates installed.

    You would probably get better luck with your question if you post this on the HP Notebook board as this board mainly deals with hp printers and the Notebook board will help with your HP Laptop.
    Good Luck !
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Can't scan to Mac OS 10.6.4 from Canon imageRUNNER ADVANCE C7055 - HELP!

    Hi all, our company just purchased a Canon imageRUNNER ADVANCE C7055, I have the Drivers and all the Macs in the office (both 10.4.11 and 10.6.4) can print to the printer but when we try and connect via the Scanning feature from the Canon to the Mac OS 10.6.4 it doesn't work. All the File and Screen Sharing is On but it just doesn't see the Macs with OS 10.6.4 for the purpose of scanning to them (they can print to it however).
    The Canon manual naturally has nothing on this problem so I'm hoping someone has encountered the same problem or is smart enough to work out what is going wrong from my post.
    Thanks in advance
    josephatkudos

    Nevermind it was an issue with not having the SMB switched on in the File Sharing options.

  • Problem with barcode print in Adobe From

    Hello All,
    We are using Adobe Forms to print our shipping labels and this as been working well for few years now. These labels include readable text and barcodes. The barcodes are 1-D but recently we now have a need to print 2-D barcodes.
    We are able to print PDF-417 as a 2-D barcode on the form, but when we try to print Datamatrix barcode, the barcode does not show and instead we just see the text which should have been encoded as 2-D barcode.
    We analyze the spool output file on the server to check the correct print controls are being sent to label printer. Our printer is a Zebra S4M using ZPLII. We send test form to our printer which will print two barcodes only (both 2-D), one is PDF-417 the other is Datamatrix. The spool output when viewed in Wordpad, is as below:
    ^XA
    PRALH0,3
    ^XZ
    CI13XA
    ^LL1219
    ^FO127,102
    ^BY3,,203
    ^B7N,,5,,,N
    FHFD1234567890
    ^FS
    ^FO127,356
    FHFD1234567890
    ^FS
    ^XZ
    The ^B7 print control is the  barcode PDF-417 control code. The Datamatrix control code ^BX is missing and should appear where there is an empty line. If we edit the spool output file and add the missing control code sequence, and then reprint the spool from SAP, then the Datamatrix 2-D barcode prints correctly.
    So for some reason, the .zpl spool output file is not being generated with the ^BX control code sequence for the datamatrix barcode. We cannot find any information on why this is so.
    We are running ECC6 SP11 (single stack) and ADS is running on a separate dual-stack BI system (NW2004s SP21).
    Our Zebra S4M printer firmware is V53.17.6Z, and printer driver is ZebraDesigner 2.6.42 (Build 2382). Our SAP device type which is assigned is AZPL203. Our ADS version is 7.00.21.0.
    We are seeing the same problem if we print test label from ECC or BI system. ECC kernel is 700 patch 266. BI kernel is 700 patch 254.
    We have found SAP Notes related to incorrect ZPL format in ^BX for NW7.1 and NW7.1 EhP1, but not for NW7.0.
    Has anyone else come across a problem like this before? Any advice would be much appreciated and duly rewarded.
    Thanks in advance
    George

    Issue is resolved.
    We updated our ADS to 7.11.5.0

  • Trouble connecting/printing to Canon copy machine and printer with iMac

    I'm having trouble connecting to/printing off of my new imac, to the network(wireless) printer at work. The printer is a Canon iR advance c5051. When I try printing it keeps giving me a message stating that I did not use the correct password or ID, 15513. It shows up in my computer's printer cue, but does not show up on the actual Canon printer's cue. The print driver has already been installed, so I'm not sure what's going on. Any help/suggestions would be greatly appreciated!
    Thanks so much!

    I'm having trouble connecting to/printing off of my new imac, to the network(wireless) printer at work. The printer is a Canon iR advance c5051. When I try printing it keeps giving me a message stating that I did not use the correct password or ID, 15513. It shows up in my computer's printer cue, but does not show up on the actual Canon printer's cue. The print driver has already been installed, so I'm not sure what's going on. Any help/suggestions would be greatly appreciated!
    Thanks so much!

  • Barcode printing using dot matrix printer

    Hi,
    Can anyone let me know what all DOT Matrix printers support barcode printing (PDF 147 type), The barcode is printed in invoice when printout is taken using laser jet but when using dot matrix (Panasonic kx-p3696), the invoice gets printed  without barcode.
    Thanks in advance.
    Sachin

    closing thread

  • Barcode printing in Laser printer

    Hi ,
    I am trying to print barcode on HP 5100 laser printers.On R&D I found there are two solutionn to print barcodes
    1. Use Barcode.dll ( only with help from SAPLPD )
    2. Use Bardimm ( Jet caps ) from HP
    Is there any other solution to acheive barcode printing .i.e without using any additonal softwares/hardwares.?
    Advance thanks for a reply ASAP.
    Ugesh

    Hi,
    To be honest, I faced this problem some time ago and I couldn't find a solution which didn't include additional software being installed (and a licence fees apply).
    I didn't even try writing my own program to act in a similar way (so we could save some money on license fees) as it would cost more than the licence anyway. If you include costs of testing and maintenance then it works out that the solutions available on the market are not as expensive.
    The one we use works well but only works for printers which support PCL (most of them do nowadays) and requires additional software and some fees.
    This solution is provided by e-bizco.com GmbH.
    Basically your barcode is transformed by the program sitting on your server (as a service). It is transformed into PCL format and printer processes it. It works on various OS including Windows and AIX.
    Thanks,
    Wojtek

  • Barcode Printing : MySAP ERP 2005

    Dear All,
    Anybody knows what is Streamserve ??
    Route via Streamserve to enable barcode printing. This is due to the fact that  mySAP EPR 2005 does not support Xerox drivers.
    What is Streamserve ? please let me know.
    Regards
    Venkat

    Hello All,
    I would like to seek help for the Security documents for Streamserve as I am not that familiar with the application. Any help from you guys are highly appreciated. Thanks in advance.
    BR,
    Xhila

  • Performance issue of Barcode printing

    Hi Experts,
    I had designed a smartform using the new barcode printing technology. It works fine. The only problem is speed. I'm using se30 to analyze the performance of this smartform. If I remove the barcode, it takes less than 2 seconds for ABAP execution of this smartform. But if I enable barcode printing, the ABAP execution time is increased to 4.3 seconds. May I know if it's normal to take about 2 seconds to generate the barcode in smartform? Is there anyway I can improve the performance?
    Thanks in advance.
    Best Regards,
    Wu Xue

    Hi Sripal,
    Thanks for your reply. Did you encounter the speed problem only when you try to print the form or you encounter the same problem even during previewing? For me, the barcode generation  takes more than 2 seconds during previewing. I think it will take more time during real printing.
    Best Regards,
    Wu Xue

  • Barcode printing via sapscritp with ricoh aficio 2045e

    Hi All,
    I have to print the barcode number of delivery (eg 8000998833) via sapscrit. The printer is a Ricoh Aficio 2045th. I installed the device type ZA001016.PRI but can not print anything. I don't know where to put my head. Can someone help me? Thanks in advance.

    Leo,
    Seems like you don't know about the basics of barcode printing in SAPScript/Smartforms - you will need the help of abap and/or basis. I saw this response on another thread which may help you:
    In traditional barcode printing barcodes are generated in the printer and not in sap system.
    Hardware required - SIMM module.
    In new barcode technology ,which has been included in SAP Web pplication Server 6.40
    barcode printing does not required any special tecs since it is send to the printer as graphics.
    But you have to convert your script to smartform.
    If you are using a release after 4.6c you can use this technology by imporing the corresponding Support package .
    See Sap note 430887 in sap service market.
    The new bar code printing allows you to print using POST2.
    Yuo can create new barcode using transaction SE73.
    Also see the SAP Note-645158
    Not a solution but it might help you in your search - if I find a sloution I will post it here.

  • Printing to Citizen Thermal Barcode printer

    Hello everyone,
    I need some direction as to where to go next on this issue.
    I am trying to take text data that contains commands with data and ascii control codes for a Citizen Barcode printer and allow my client (a web browser) the ability to print this data to its local printer and generate labels (not the raw data)
    I have been able to code a servlet that can prints my barcodes to the local printers on my PC, but I cannot access a client's collection of printers from the web server.
    It seems I need to render the data and do a window.print() in Javascript: Here is my servlet code that works when the printer is local to the web server.
            try {
              PrintService psCitizen = null;
              String sPrinterName = null;
              PrintService[] services = PrintServiceLookup.lookupPrintServices(null, null);
              for (int i = 0; i < services.length; i++) {
                sPrinterName = services.getName().toUpperCase();
    log(Trace.DIAGNOSTIC, "Printer " + i + ":" + sPrinterName);
    if (sPrinterName.toUpperCase().indexOf("CITIZEN") >= 0) {
    psCitizen = services[i];
    break;
    if (psCitizen == null) {
    log(Trace.DIAGNOSTIC, "Citizen printer is not found. Ps Count = " + services.length);
    return;
    DocPrintJob job = job = psCitizen.createPrintJob();
    //String STX = "^B";
    //String CR = "^M";
    String STX = "\002";
    String CR = "\015";
    //String STX = (char)2 + "";
    //String CR = (char)13 + "";
    String s = "";
    s += STX + "RN" + CR;
    s += STX + "e" + CR;
    s += STX + "M2982" + CR;
    s += STX + "O0100" + CR;
    s += STX + "f170" + CR;
    s += STX + "qC" + CR;
    s += STX + "L" + CR;
    s += "H16" + CR;
    s += "D11" + CR;
    s += "PH" + CR;
    s += "SC" + CR;
    s += "W" + CR;
    s += "Q0001" + CR;
    s += "264400005930182DFW" + CR;
    s += "232200005840339ORD" + CR;
    s += "2e4411005360035BORD4721215005800001" + CR;
    s += "241100003160222TEST" + CR;
    s += "232100003160243Consignee:" + CR;
    s += "241100003160268TEST INTERNATIONAL, PHILA" + CR;
    s += "232100003160288Shipper:" + CR;
    s += "232100003160314Deliver By:" + CR;
    s += "232100002190192 5" + CR;
    s += "23210000142031409/23/06" + CR;
    s += "26210000310033412150058" + CR;
    s += "232100001590192Pieces" + CR;
    s += "241100002500192OF" + CR;
    s += "231100003760015ORD4721215005800001" + CR;
    s += "231100005840162Comment:" + CR;
    s += "232100003160192 1" + CR;
    s += "E" + CR;
    s += "";
    byte[] by = s.getBytes();
    DocFlavor flavor = DocFlavor.BYTE_ARRAY.AUTOSENSE;
    Doc doc = new SimpleDoc(by, flavor, null);
    job.print(doc, null);
    } catch (PrintException e) {
    How can I using a servlet, JSP or Javascript get the user to print the label data from the client browser and have the thermal printer interpret the browser data as commands to print. I don't mind the browser user having to select the printer.
    Thanks!

    I don't think that you'll be able to do this correctly with JavaScript, as those control codes probably won't be rendered correctly in the web browser. I'm guessing you'll need a signed applet to properly receive the exact commands to send to the printer. You can use the Jakarta HttpClient to receive the exact commands from the Servlet, then some kind of print API to send the commands to the printer.
    Brian

  • Won't print to canon PIXMA ix6820

    how can i print to canon PIXMA ix6820 with PSE12?

    docforr wrote:
    Thanks for responding to my plea.
    I get a message that "the saved printer information is not compatible
    with this version of photoshop elements or the saved printer is no
    longer available.
    The printer and Adobe elements were brand new. The printer works with
    other programs. It never worked.
    PDF
    Have you ruled out an issue with the driver for the printer? It is possible that the material on the installation disk was developed prior to PSEv.12. I understand that everything is new, but who knows what the date of production is. You can check on Canon's web site for driver update.

  • Can't print to Canon LBP7200Cdn after Lion upgrade

    Since upgrading to Lion, I can't register (and therefore can't use) my office printer, a Canon LBP7200Cdn.
    I tried for weeks to get it to work with the interim driver Canon released with Lion, then gave up and waited for the full driver. Then that didn't work either.
    Installation of the driver appears to work fine, but once the printer is registered, printing from any program gives me the error message "/Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl failed".
    The problem is the same whether connecting via USB or IP.
    I had the same problem when I updated to Snow Leopard 10.6.7, but installing Canon's new driver fixed it. Now nothing works and I haven't been able to print since the summer. No other Mac users are having this problem (but I'm the only one running Lion). Would welcome help from anyone.
    Here's the System Profiler info on the printer:
    10.0.0.6:
      Status:          Idle
      Print Server:          Local
      Driver Version:          3.40
      Default:          Yes
      Shared:          No
      URI:          cnbma://localhost:59687
      PPD:          Canon LBP7200C CAPT (UK)
      PPD File Version:          3.40
      PostScript Version:          (3010.000) 550
    (3010.000) 651
      CUPS Version:          1.5.0 (cups-297.2)
      Fax support:          No
      Scanning support:          No
      Printer Commands:          none
      CUPS filters:
    capdftopdl:
      Path:          /Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl
      Printer utility:          /Library/Printers/Canon/CUPSCAPT/StatusMonitor/StatusMonitor.app
      Printer utility version:          3.40
      PDEs:
    FinishingPDE.plugin:
      Sandbox compliant:          No

    I'm having the same issue.  I've re-installed the Canon software after deleting all of the folders & files that they talk about in the user manual.
    Same issue.  /Library/Printers/Canon/CUPSCMFP/Bins/capdftopdl failed
    I've sent a note to Canon and here's their first reply.
    Thank you for contacting Canon technical support.  We value you as a Canon customer and appreciate the opportunity to assist you.  We regret that you are experiencing difficulty printing to your imageCLASS MF3010.
    We will gladly provide assistance.  Unfortunately, it is not clear what is causing this.  We will gladly help troubleshoot to isolate the cause:
    1.  Is the printer connected directly to the computer or through a print server, USB hub or other external device?
    Directly to the computer with USB
    2.  Can you make copies without using your computer?  This will verify if the printer is working.
    Don't know waiting for my folks to try this.
    3.  Are you installing drivers from the CD disk or downloading them from the Canon website here:
    Downloaded from the website.  No Mac sofware on the CD supplied with the printer.
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass _series/imageclass_mf3010#DriversAndSoftware
    With this information, we will be able to better assist you.
    We look forward to your reply with the information we have requested regarding your imageCLASS MF3010.
    Thank you for choosing Canon.
    Sincerely,
    David
    Technical Support Representative
    Special Note: Certain issues are very difficult to resolve via email.  If you would prefer to speak to a technician for additional assistance, you may call our special toll-free number for email customers with unresolved issues by dialing 1-866-261-9362, Monday - Friday 8:00 a.m. to 8:00 p.m. ET (excluding holidays).  If you prefer to continue to communicate via email, reply to this message and we will respond as quickly as possible.

Maybe you are looking for